Use of technical business content

help me about, what is the technical business content, what is the use of technical business content in the projects.
please give detail explanation with suitable scenario
thanks & Regards
JPReddyM

JP,
Technical content is SAP delivered and is used for monitoring the system activities. The activities related to loading, query executing and other administration activities can be analyzed from the technical content infrastructure. Once you install this and enable objects for statistics, the details of various activities are picked from respective tables and loaded to technical content cubes and ODS's which can be analyzed with the technical content queries.
For ex: You can analyze the query performace, user accessing that query and compare with previous activity.

Similar Messages

Accounts Payable Line Item Extraction to BW from SAP using Business Content

Hi,
I have to set up the AP Line Item extraction into BW using the Standard Business Content.
Could someone please gide me through the process for doing it ( Step-by-Step if possible), both from the SAP R/3 side and the BW side.
Any help deeply appreciated.
Regards

goto rsa5 in R/3 -- select 0FI_AP_4 and click install...if you goto RSA6 and see this datasource there then it means it is installed..
now come to B/W ...goto source system...right click on source system and replicate datasource...
on the left side you would..modeling...transport organizer etc... goto business content tab...
goto grouping and it should be set at 'Only necessary objects'.
click on object type on the left side...and it will see..goto Infocube ...select the one which i mentioned below..select it and drag to the right side..similarly do this for ODS, infosource, UR, TR...and click install you should be set...
0FIAP_C03 - Infocube
0FIAP_O03 - ODS
0FI_AP_4 - Infosource
update rules
transfer rules...
Please assign points if it was helpful

Installing Learning Solution in HR using Standard Business Content

Hi,
I have to set up the extraction for the Learning Solutions cubes in HR into BW using the Standard Business Content.
Could someone please gide me through the process for doing it ( Step-by-Step if possible), both from the SAP R/3 side and the BW side.
Any help deeply appreciated.
Regards

the procedure is the same as i have explained to you in your previous post...
in R/3 - RSA5 - Activate DS :
Which cube are u trying to install ? There are 2 cubes :
1) Resource researvation and 2) Training management
1) Resource reservation : INSTALL THE BELOW ITEMS
Cube :0LSO_C02
Infosource : 0HR_LSO_3
Datasource : 0HR_LSO_3 AND TRANSFER RULES AND UPDATE RULES
2)tRAINING MANAGEMENT :
cUBE:0LSO_C01
INFOSOURCE:0HR_LSO_1 & 0HR_LSO_2
DATASOURCE :0HR_LSO_1 & 0HR_LSO_2
AND UPDATE RULES AND TRANSFER RULES :
pLEASE ASSIGN POINTS IF IT HELPS...
THANKS

BI 7 Activate Business Content Best Practice?

Guru,
Could you share your experience on how to activate business content in BI 7. In 3.x, I used to activate business content based on infosource then crate ods and infocube based on in infosource. Now in BI 7 infosource is no longer necessary. Please share your thoughts of best practice on activate business content in BI 7.
Thanks,
John
Message was edited by:
John Do

Hi,
To actiavte the objects in the BI content u can select which ever object u want and then select the collection mode as all the objects before and after....
this will ideally activate all the objects that are required for the functionin of the object that you have selected .......
In simpler way....
RSA1-> Business Contents-> Select your objects-> On the right hand side, select "automatic collection" under "collection mode" and Select "before and after data flow" -> Right Click the selected objects on the left hand side and right click -> Insert Objects for collection-> Once the selected objects comes to the right hand side, select "install" and click "install in background".
See this also....
http://help.sap.com/saphelp_nw04/helpdata/en/37/5fb13cd0500255e10000000a114084/frameset.htm
Hope it helps,
Happy Life,
Aravind

LOS - Business content cube

Hi Guys,
When we are extracting data from LOS for ex, 2lis_12_vaitm, 2lis_12_scl or others. some times we are not using the SAP business content cubes. We are creating our own cubes by using the standard LOS.
Can some one please give a clear explnation of some examples which LOS DS and why we have gone for other then business content cube.
If you have any document please post here or send me to this mail [email protected]
Bye...
Sankar Reddy

hi
If we want more additional fields to be added to the cube, or the fields in the cube is no longer relevant for our analysis we decide for custom cubes
In that case, we modify the datasources and extract data to accomadate in cubes
Hope this helps
Assign points if useful
Regards
N Ganesh

What is the use of Match(X) or Copy in Business Content Collected Obj..?

Hi All,
In Business Content, After doing Drog nd Drop on Collected Objects, There, after Install Icon(I) we will find Match(X) or Copy (M) ......
Can anybody tell me what is mean by it and why and where do we use it.....?
Please Reply me.......
Regards,
Kiran Telkar

Hi Kiran,
Match (X) or Copy
If the SAP delivery version and the active version can be matched, a checkbox is displayed in this column.
With the most important object types, the active version and the SAP delivery version can be matched.
From a technical point of view, the SAP delivery version (D version) is matched with the M version. As in most cases the M version is identical to the active version (A version) in a customer system, this is referred to as a match between the D and A versions for reasons of simplification.
When a match is performed, particular properties of the object are compared in the A version and the D version. First it has to be decided whether these properties can be matched automatically or whether this has to be done manually. A match can be performed automatically for properties if you can be sure that the object is to be used in the same way as before it was transferred from Business Content. When performing matches manually you have to decide whether the characteristics of a property from the active version are to be retained, or whether the characteristics are to be transferred from the delivery version.
Example of an automatic match
Additional customer-specific attributes have been added to an InfoObject in the A version. In the D version, two additional attributes have been delivered by SAP that do not contain the customer-specific attributes. In order to be able to use the additional attributes, the delivery version has to be installed from Business Content again. At the same time, the customer-specific attributes are to be retained. In this case, you have to set the indicator (X) in the checkbox. After installing the Business Content, the additional attributes are available and the customer-specific enhancements have been retained automatically. However, if you have not checked the match field, the customer-specific enhancements in the A version are lost.
Example of a manual match
An InfoObject has a different text in the A version than in the D version. In this case the two versions have to be matched manually. When Business Content is installed, a details screen appears which asks you to specify whether the text should be transferred from the active version or from the D version.
The Match indicator is set as default in order to prevent the customer version being unintentionally overwritten. If the Content of the SAP delivery version is to be matched to the active version, you have to set the Install indicator separately.
The active version is overwritten with the delivery version if
¡ the match indicator is not set and
¡ the install indicator is set.
In other words, the delivery version is copied to the active version.
If the Install indicator is not set, the object is not copied or matched. In this case, the Match indicator has no effect.
In the context menu, two options are available:
a. Merge All Below
The object in the selected hierarchy level and all objects in the lower levels of the hierarchy are selected as to Match.
b. Copy All Below
The Match indicators are removed for the object in the selected hierarchy level and all objects in the lower levels of the hierarchy. If the Install indicator is also set, these objects are copied from the delivery version to the active version.
hope this helps.
Regards,
Sreedhar

Error while loading external data using Business Content

Hi,
I am new to BW and I'm stuck up with this problem.
I'm trying to load data from external file using business content cube(0PUR_C01)and infosources(2LIS_02_ITM/S012/SCL).
I first installed the above mentioned cube and data sources.
Then I activated the update rules and transfer rules, without any changes.(I don't know what changes might be required!)
Monitor is showing successful load but the cube has 0 enteries.
Even the simulation of update is showing data in the data target.
Can someone please guide me through this ?
Its really urgent....
Thank you all in advance.

Hi Sharmistha,
Welcome to SDN !! Does your monitor shows any records extracted till PSA ? Go to the details tab -> processing and click on each node to check what monitor shows.
Hope it helps.
Thx,
Soumya

How to Install the Cubes(SD & MM) by using the Business Content

Hi All,
Can anybody tell me how to install the Cubes(SD & MM) by using the Business Content,
And also require any Material & Navigation steps for to do this...
Reply back me to [email protected]
Regards,
Kiran

I know this is very old but I’m trying to clean up old posts. Did you ever solve this? If so it would be good if you could post the solution to assist others. If not, at this
stage, as nobody has answered, I would recommend that you call Intune support.
You will find your local Intune support number here
http://technet.microsoft.com/en-US/jj839713.aspx
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Use of Match(X)or Copy and Install checkboxes in Business content

Hi,
What is the use of checkbox selection under Match(X) and install in L.H.S of Business content while we try to install an object?
Thanks in advance

Hi,
Have you seen same question posted on today:
Installing Business Content - How to Deselect Match (X)/Copy Column ???
the help says that:
The active version is overwritten with the delivery version if
1) the match indicator is not set and
2) the install indicator is set.
In other words, the delivery version is copied to the active version.
If the Install indicator is not set, the object is not copied or matched. In this case, the Match indicator has no effect.
With rgds,
Anil Kumar Sharma .P
Message was edited by:
Anil Kumar Sharma

BI LSO - use of business content: problem and limitation

Hi,
we are working on BI to develop some reports from LSO data. We are using 0HR_LSO_1 and 0HR_LSO_3 for participation and resource reservation and a lot of custom datasources from infotype 1001, 1000, 1042, 5007, and so on.
We have met lot of problem in modelling a simple and flexible BI data model, because of lack of information from business content and time dependent maintenance of many information.
Just to report few of the problem we have, we notice that
1. no link between EK and D object is extracted by standard datasource, so no information is there if a D as been attemped as a single course or as a course between several from an EK object;
2. no master data is there for the 0LEARNER characteristic and no link is there with 0EMPLOYEE to better describe P object; if participant is not a P object, you don't have any information about it (!);
3.no master data is there for the 0TRAINTYPE characteristic; we needed to add lot of information to better describe the D object (!);
3. presence of 0TRAINGROUP in participation datasource may cause doubled of information (doubled count of participation) if D object is located under several L object in ovelapping time interval;
3. resource reservation datasource is not able to extract data if resource type is not defined in LSO;
4. performance is quite poor caused by lot of calculation doing by FM "read_infotype_1001" type;
5. no pre-enrolment is considered in business content;
6. no link between resource and participant is there, so you cannot provide any report of type "who partecipate to the edition with this reource type" in a simple way;
We have to develop lot of custom to handle lot of problem like those; so I would like to share experience in BI LSO data flow design and development: please let me have your observation.
thanks in advance.
L

Any experiences / contributions / documentations to share ?

Flat Files: Use of Business Content or not?

Hello Experts,
I am wondering, with all the extra effort in the research to identify Cubes with preferred fields for a BW project, especailly if the source is a flat file, what actually are the advantages of going through this analysis to use the SAP delivered objects.
Thanks in advance.

Hi Amanda,
If you are on a project in the functional area which is already covered by SAP, then it is preferrable to make an analysis of business content objects. Even if you are going to use flat files for data upload, predelivered infosources, ODSs, cubes, TRs and URs, queries may save you a lot of time.
Search help.sap.com for your functional area looking for infoobjects and providers. Try to evaluate if they are useful. Certainly, some knowledge in the func area is a great advantage.
Search business content in the func area. You may even simulate BC installation. For example, choose a cube, with data flow before and after and gather objects. The scope of these objects may give your some hints to evaluate.
If there is just one, yours, project on a BW instance, then you can use or even modify BC objects that you found. Master data loaded will not interfere with the other projects.
If the func area of your project is not covered by SAP, then, most likely, youll be able to use just a few BC objects, all the others youll have to create.
Sometimes, even if you are in the func area for which youll find predelivered objects, its more suitable to make copies of such objects and modify them deleting attributes that youll never use. Use of such standard infoobjects with many attributes may fource users to ask a lot of questions about these attributes (why, whats this, what for etc.). Moreover, if these attributes are not used, youll prepare your flat files with a lot of blank fields for the attributes. Consider also an extra DB space for them.
Doing the project almost from the scratch (with minimal usage of BC objects) will require very careful conceptual design of the data model.
Best regards,
Eugene

How to install/use business contents on Erecruit - in BW 3.5

I am challenged with a brand new BW 3.5 install where I am trying to install Erecruit (ODSs) business contents. I cannot find any documents on what is needed before I can use the business contents as well as what's included in the ODSs and the rest of business contents. Perhaps they share objects from other infoCubes that I do not have. This is a fresh installation of BW 3.5 and nothing else is installed. We have a fully functional ESS/Erecruit so it'd be nice to analyze that data into BW system. Thanks for any help or clues.

Bilal
Welcome to SDN
Please check the following links
http://help.sap.com/saphelp_nw04/helpdata/en/8f/c5c43f82ab6d3fe10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/93/38c53f3e0f0228e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/b1/c7bb3f039cf772e10000000a114084/frameset.htm
Hope this helps
Thnaks
Sat

How to implement ods by using Business content objects

HI BW Guru's
i want to implent the ODS object with some BCT info objects & some customer defined objects . for BCT info objects how to install and how to use that objects in ods objects . pls help me i want steps for this.
Thanks
reddy

Hi,
Useful links for you. This link discusses the step by step procedure for using business content.
how to use business content?
Other useful links:
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm
assign points if useful ***
Thanks,
Raj

Authorization issue while using business content objects

Hi all,
I am getting an authorization error while loading from DSO to Cube (for standard business content objects only). Even i am not able access the data in Bex reports from Standard cubes or DSO.
The user is assigned to SAP_ALL .
But there is no such issue while accessing user defined DSO or cubes.
any solutions will be helpful.
Regards,
Varma

Hi,
Have you seen the error thru the SU53 t-code ? There you should see what is the missing authorization with the user.
Regards, Federico

PlzzHow can we check the version of Business Content in ECC 5.0 version??

Hello Experts,
Plz tell me.. How could we check the version of the business content installed for ECC 5.0? I tried to search for the same in the forum but I couldnt.. plz let me know as I doubt that the business content is not properly installed for ECC 5.0 in my PC. and also I see only Technical content for Object Types under Business Content in AWB.
I always thank people awarding points!!

Hi Ajay, Thanks for the Info regarding PI...
I am using my ECC 5.0 as BW system as it got BW 3.5.. and I am really trying to see the Business Content Cubes like 0PUR_C01,0PUR_C04 etc... and in RSA1>Business Content> Object Types I could see only the Technical Content cubes..(not able to see the SD,MM..etc related cubes)...
And yeah I have R/3 PI installed with 2004_1_490 Version.. and so I could see all the Business Content DataSources in the source system...
Is there one more PI for BW?? or the same as above??
Plz through the light..!
Regards,
Sapster.

Use of technical business content

Similar Messages

Maybe you are looking for