Use of template using CPT1 for charging an additional cost to the product

Hello,
I'm trying to charge an additional cost burden to the cost of my product for every base unit produced. (cost estimate)
I have created a template using transaction CPT1 with sender as Cost Center / Activity Type in environment 001
The activity type is measured in EA (Eaches) while we make our product in boxes (Product base unit of measure is 'Boxes') with say 20 Eaches going into a Box
I have maintained an activity price using transaction KP26 at say $0.55 per Each
I have assigned this template to my costing sheet , valuation area and overhead key using transaction KTPF
When I now cost the material for costing lot size of a 1000 boxes, it still charges the product with the activity price per Each ($0.55) instead of multiplying  $0.55*20*1000 = $11,000 for a 1000 boxes
The formula I have chosen in the template against 'Plan quantity ' is in the attachment enclosed:
I need help with doing the right thing within the template to make it give a cost burden of $11000 for every 1000 boxes costed (costing lot size)

Didn't realize that you have to use transaction CPTD to charge template overhead to production orders. That's why it was not working. Now it is posting by reading the confirmed yield. But it is still not converting eaches to boxes using the conversion factor in the material master.
The formula I'm currently using in the template for actual quantity is as under:
OrderYieldConfirmed / AltQtyFactorFromMaterial( AlternativeQuantityUnit
= 'BX', Material = OrderMaterialNumber )
Please tell me what I need to do to the above formula to make it convert boxes to eaches using conversion factor in the material master?
A similar formula has worked beautifully for 'cost estimate'
OrderTotalQuantity / AltQtyFactorFromMaterial( AlternativeQuantityUnit =
'BX', Material = OrderMaterialNumber )

Similar Messages

  • I can't use Adobe, a box comes up saying i need to unistall the product then reinstall

    I
    can't use Adobe, a box comes up saying i need to unistall the product then reinstall

    What version of Adobe Reader?
    What system?
    What EXACT message (a screen shot can help here)?
    Be very suspicious if a program is offering to help you with that, it could be a scam.

  • Use an additional cost in the cost calculation

    How to make to use one or more additional costs during the calculation of the cost of a finished product
    Could you help me, please.
    Thank you.
    Jean-Marc

    You can use additive costs to add costs to a product other than the cost estimate.CK74n

  • Batch Traceability for Sugar as raw material during the production process

    Dear Colleague ,
    I need your support for a traceability issue in a customer on beverage sector
    See the case below:
    Batch Traceability for Sugar as raw material during the production process
    In AMSB the batch traceability in some production processes is very difficult, especially in case of sugar where tanks wherein more than one batches of the same material can be mixed. For example, in a single day almost 17-20 batches of the same material can be mixed and as the result is a composition of water and sugar the normal FIFO rule strategy cannot be applied during the component consumption.
    The raw material (sugar) is received in tank S5 at different points of time, and its content is transferred to tank B1 for storage purposes as well as for mix the sugar with other material such as water.
    At a specific moment the S5 tank contains only a single batch, while the tank B1 contains more than one batch. Tank B1 is used in order to supply the production line and the corresponding material consumption is triggered in backflush as soon as the production activity is declared (production confirmation). Along with the material consumption the batch determination takes place and a complex algorithm is applied: at a very high level, the single batch is consumed depending on its percentage inside the mix of composition and in case the this
    percentage is under a threshold level the current batch should be full used in order to avoid that it will exist for ever.
    Moreover, the good movement reversal (reversal of material consumption) and its correction lead to a complete new calculation of all the batches consumed after the original movement date/time. This means that the algorithm for batch determination should be reapplied for all the consumptions subsequent to the original movement.
    On the other hand it’s not possible to identify the mix of batches at the exit point of silos B1 because the total consumption of the material in the tank will never happen. As long as the tank level decreases it will be filled up from the tank used for receiving of sugar (S5).
    As requirement AMSB needs to post the material consumption starting from EWM, this means that EWM should be the master system in this case and the correspondingmovements have to be  transferred to ECC afterwards. This mainly because EWM  should guarantee the business continuity in case the ERP system is not available.
    AMSB asked if the scenario depicted has been implemented in some customer, in EWM system or in any other SAP solution.

    Hi ,
    At the time of consumption you can put ' * ' aestrix sign in the batch field.
    You will get list of batches of that material.select ur batch and consume the quantity.
    Regards
    Piyush

  • Ven though i have a year student subscription with creative cloud when i try to open the programmes a window comes up for free trial or to buy the product. I was clicking the free trial option but i guess thats over now so it won't allow me to access the

    Even though i have a year student subscription with creative cloud when i try to open the programmes a window comes up for free trial or to buy the product. I was clicking the free trial option but i guess thats over now so it won't allow me to access the programs. Any suggestions?

    Hi natasachara,
    Please refer to the details about the student plan below:
    Creative Cloud Help | Creative Cloud for Students and Teachers / Common Questions
    Regards,
    Sheena

  • Using Car Cigarette Lighter Adapter for Charging iPod

    I have a car cigarette lighter adapter with a USB output.
    (1) Is it safe to use this for charging my iPod in the car - I don't know which gadget that I bought in the past came with this adapter.
    (2) Is there a way to find out whether it could be used or not?
    Dell Inspiron 6000 Laptop Windows XP Pro 1.6 GHz, 1GB RAM

    http://cablejive.com/iphone3g_chargeconverter.html
    http://www.chargeconverter.com/shop/connector.htm?connipod.htm

  • I'm using premiere pro CC 2014 for 4k editing. whenever I play the sequence cut off only window (premiere pro cc 2014).

    I'm using premiere pro CC 2014 (trial version) for 4k editing.
    but I saw the play sequence problem.
    whenever I play the sequence cut off only window (premiere pro cc 2014).
    but mac was fine.
    I can't using realtime play.
    my sequence setting information
    sequence > sequence settings
    editing mode : custom
    timebase : 59.94 frames/second
    video
    frame size 3840*2160
    pixel aspect ration : square pixels(1.0)
    fields : no fields (progressive scan)
    display format : 60fps
    audio
    sample rate : 48000 Hz
    display format : audio sample
    video previews
    preview file format : quick time
    codec : Gopro Cineform
    Maxium bit depth : uncheck
    Maxium render quality : uncheck
    composite in linear color : check
    check it please my workstation spec.
    1. HP Workstation (Z840)
        * CPU : Intel Xeon E5-2690v3 2.6Ghz
        * RAM : 128GB
        * Graphic Card : Quadro K5200

    Now I see is fully integrate with the OS preference. If you change the scale in windows resolution Preference, Premiere Pro scale too.
    Thanks.

  • Pulling a Record set and then using a field within that record to pull additional information from the table.

    I am pulling information based on the following "If" statement;
    If({JCT_CURRENT__TRANSACTION.Category} = "L"
        and "cost" in {JCT_CURRENT__TRANSACTION.Transaction_Type}
        and {JCT_CURRENT__TRANSACTION.Transaction_Date} > {@Prev Week}
        and {JCT_CURRENT__TRANSACTION.Transaction_Date} <= {@Week 1})
    then
    {JCT_CURRENT__TRANSACTION.Units}
    This works fine and I can print it on the report with other associated fields.  One of those fields is a "Cost Code" field associated with the above conditions and date set (I am pulling for one pay period week).  Of these transactions, each week different "cost codes" could be available.
    One item I need to figure out another formula is associated with the cost codes that are pulled, but, I need to compare them to a different date range.
    Here is how I get the cost codes that were used in a specific time frame;
    If({JCT_CURRENT__TRANSACTION.Category} = "L"
        and "cost" in {JCT_CURRENT__TRANSACTION.Transaction_Type}
        and {JCT_CURRENT__TRANSACTION.Transaction_Date} > {@Prev Week}
        and {JCT_CURRENT__TRANSACTION.Transaction_Date} <= {@Week 1})
    then
    left({JCM_MASTER__COST_CODE.Cost_Code},6) & "001"
    This gives me the cost codes used in that period but changes the last three digits to be "001" (xx-xx-001).
    Now, I need to take that cost code, the xx-xx-001 and compare it to a completely different date range to get an "estimate" number.
    My problem is that, because I need to use a date range in the original conditions, even after I truncate the cost code, for some reason, it stays associated with that date range.
    How can I use a field from a group of records based on date, but, associate it with a competely different date range.
    I hope this is clear, I am having a real hard time with this, I am fairly new, but have pretty normal working knowledge of basic formulas, etc...
    Thanks, Mike

    Please re-post if this is still an issue

  • Using AAMEE to Package CS6 for Enterprise Deployment | Creative Suite In The Enterprise | Adobe TV

    CS6 software requires activation and Adobe ID login. By packaging CS6 with AAMEE 3.0 before deployment, only the IT Admins needs to complete a one-time package activation and Adobe ID login, individual users of thesoftware do not. Learn about these new requirements and how to help yourenterprise customers through this new process by using the free AAMEEtool. AAMEE also gives you advanced package configuration and updat options.
    http://adobe.ly/LGI0Xf

    We have a major issue with the way this works... we have no internet on our workstations, and want to deploy... it appears there is NO WAY to do an offline activation using the AAMEE program!!! This is a major oversight for people who work on contained networks, with zero internet on any workstations where the deployment can be made.
    Please let me know of a way round this, it is quite urgent!
    Thanks

  • I've been using firefox as my browser for many years. Lately in the past 3 months, it will not open. When I click on the app, it only opens the program files wi

    I've tried uninstalling and reinstalling firefox. I have a pc and use Windows Vista. Please help! Thanks!

    A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls
    See also:
    *http://kb.mozillazine.org/Browser_will_not_start_up

  • Is Apple working on a fix for editing photos for wallpaper, call contacts with photo, etc? The iPhone used to be so intuitive for everything but that tanked with the ios7 upgrade

    iPhone 5 was so intuitive before the update. Editing photos has changed for the worst-any word of a fix for editing photos for wallpaper? Not a work around, a fix. If I wanted this kind of photo editing I'd still be using my droid x.
    Anyway to go back to ios6?

    Is Apple working on a fix for editing photos for wallpaper, call contacts with photo, etc?
    How would we know?
    What's broken that you think needs to be fixed?
    Anyway to go back to ios6?
    No

  • I am using Greasemonkey extension to play Kingdoms of Camelot and today the pop-ups used to ask other members for help are so far to the right that they can't be used.

    When I first signed on the page kept refreshing every 3-4 seconds. Another player gave me some URLs to download and it fixed that problem but now the pop-ups that are part of the game are loading halfway off the page to the right and the advertisement section on the right is significantly wider.

    You might want to use the discussions tab for that script so the author can assist with the issue. I'm not sure which script it is -- this Google search retrieves over 1000 results!
    [http://www.google.com/search?q=site%3Auserscripts.org+inurl%3Ashow+kingdoms+of+camelot site:userscripts.org inurl:show kingdoms of camelot - Google Search]

  • Have airport extreme, square model, have a external harddrive to use as back up(formated for mac)hooked it up to the usb port in back. can't find it on my computer. what am i doing wrong

    have the airport extreme, square model. have a external harddrive formated for mac hooked up to the usb port in back.
    i can't find the harddrive on the computer for back up in timemachine. what am i doing wrong?

    First, if you are not aware, you need to know that Apple does not officially support Time Machine backups to a drive at the USB port of the AirPort Extreme.
    That may be part of the problem here, so if you want to continue to try this, you need to understand that there are no guarantees of success.
    Some users do seem to be able to make this work, but most have some problems and some....like me....have nothing but problems when they try this.
    If you want to continue to try this, the first thing to verify is that the drive is formatted specifically in Mac OS Extended (Journaled). Have you verified that the drive is formatted correctly by connecting it directly to your Mac and using Disk Utility to check?
    Some drives that are advertised as being "compatible for Mac" are not formatted correctly in Mac OS Extended (Journaled). Time Machine has no chance of success unless the drive is first formatted correctly.
    I would also ask that you consider leaving the drive connected to your Mac for Time Machine backups. That will be supported, and is a far more reliable way to keep backups if your data is important to you.
    Next, we need to know what operating system you are running on your Mac. If you do not know, click the Apple icon in the upper left corner of the screen and then click About This Mac.  Post back with the OS X Version number that you see there.

  • Function ToDate uses an invalid format 'yyyyMMdd' for parameter format. Try rewriting the formula.

    How can I convert a date format such as "20140730" using TO_DATE()??
    I have tried to create a calculated dimension with ToDate function but it seems Lumira didn't support with that specific format.
    Thanks,
    Raymond

    Hi Raymond,
    I understand your concern about the date format. Are you getting blank cells when using the year first, such as "yyyyMMdd"?
    Try to use this formula below when creating a calculated dimension (replace {Date} with the correct dimension if different):
    ToDate( {Date} ,"dd/MM/yyyy")
    It should convert it to a date just fine that way, and then you can right-click on the column and change it to whatever you prefer using "Display Formatting". I'm not sure why this is happening after I did some testing, but I'm sure it will be fixed.
    If you want to use Tammy's method, it's also very simple. Just right-click on the column, "Convert to Text" and set number of digits to keep to 0. Then convert to date using the first option in the drop down and change display formatting to whichever you prefer afterwards.

  • Purchase from iphone app ,credit charge to my bill but the product fail to receive

    i am using my iphone app to purchase [line] sticker ..bills are charge to my credit card but 1 of the sticker fail to puchase
    smile brush is a fail trac  , my line didnt have tis sticker app said purchase download fail ..but itune still charge on my credit card..pls check for me asap
    thanks

    These are mainly user-to-user forums, Apple only post on older unanswered threads.
    You can contact iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Maybe you are looking for