Use of View in NWDS

can i use a view of another project into my project ? If yes, how ?

Hi akhilesh,
You can use views of two differet projects into one another.
For this you have to create Development component project,where in you can make packages public and can use them.
Steps:
1) First create Development component Project.
2)Create the layout(view,controllers) in corresponding packages.
3)Now while context mapping make use of Interface controller.Bind the views and controllers, which you want to use in another project, to interface controller.
4)Now GO to the DC in webdynpro explorer and open the project.In DC Metadata there is one folder Public Parts.In that create new public part and make the view and controller packages public .
5) In another DC Project ,go again to DC Metadata Folder>DC Definition>used DC.and add the the public part here.
This way you can make the view and controllers public
Regards,
Prajakta

Similar Messages

Cant open PDF files..It says the adobe acrobat reader that is running can not be used to view files in a browser..plz suggest the solution.thanks

Whenever i try to open a PDF file it says " The adobe/acrobar reader that is running can not be used to view files in a web browser. Plz exit adobe/acrobat readerand exit your web browser and try again." Wt do i need to do, plz suggest.
Regards
Aditya Bhargava

Hi adityabhargava01-
My first suggestion is to upgrade to the most recent version of Firefox by going to this link:
http://www.mozilla.org/en-US/firefox/new/
My second suggestion is to read this article on how to many your preferences on how Firefox deals with PDFs and all other file types:
[[Options window - Applications panel]]
I hope that helps!

AdobeAcrobat/Reader that is running can not be used to view PDF Files in Web Browser...what do I need to do to fix this..

I just got Windows 7 and have been having problems since loading it. Most of my drivers only go to Vista and don't recognize 7.
I have trying to download some manuals from their website
and keep getting this message; Adobe Acrobat/reader that is running can not be used to view PDF files in Web Browser.

Could I suggest a workaround for PDFs until a solution is posted? Open them directly in the Adobe application rather than in a browser tab.
In your Adobe application(s), go to:
Edit > Preferences > Internet
Then uncheck "Display PDF in browser"
(There are very few sites where having PDF integrated is really beneficial.)

Chrome - Adobe-Acrobat/Reader can not be used to view PDF files in a web browser.

I can't view PDF files via Chrome (it works on Internet Explorer but I prefer Chrome) - the error below has arisen recently on Chrome, though I can't see what has changed.
"Acrobat plug-in
The Adobe-Acrobat/Reader that is running can not be used to view PDF files in a web browser. Please exit Adobe Acrobat/Reader and exit your Web Browser and try again."
I have looked through Forum articles on similar errors and have tried the following(text copied from other Forum entries)
Repair Adobe Acrobat (from Acrobat)
Repair Adobe Acrobat (from Control Panel
Configure Acrobat as a helper application: Choose Edit > Preferences., Select Internet on the left., Deselect Display PDF In Browser Using [Acrobat application], and then click OK.Quit Acrobat or Reader
Create a registry item for Acrobat: with Regedit: If the registry item doesn't exist on the system, do the following: Go to Edit > New > Key and create the missing HKEY_CLASSES_ROOT\Software\Adobe\Acrobat\Exe.Go to Edit > New > String Value and name this key (Default).Select (Default), and then go to Edit > Modify. Type the Adobe Acrobat path in the "Value data" for your product.,restart your computer
Repair the HKCR\AcroExch.Document registry key: Navigate to HKEY_CLASSES_ROOT\AcroExch.Document., Right-click AcroExch.Document and select Delete; make sure that you have the correct key, and click Yes on any prompts, Right-click AcroExch.Document.7 and select Delete; make sure that you have the correct key, and click Yes on any prompts. Repair your Acrobat installation
None has solved the problem. However it still works ok with IE. But I want to stick with Chrome because I find IE is so slow!
I am using Vista, with Adobe Acrobat standard 9.5.2 and Google Chrome version 23.0.1271.64 m which is marked on Chrome as 'up to date'
Does anyone know why I might be getting this error on Chrome but not IE?

I think I have discovered the answer to my own question!
I have disabled Adobe Reader plug-in, and can now see PDFs in Chrome.
(Steps: Chrome Menu, Settings option, Click Advanced Settings link, then Content Settings button, then select Disable Individual Plug-Ins, and a list of plug-ins is offered to enable or disable).
I then get a different result depending on whether or not Chrome PDF viewer is enabled - with it enabled I see the PDF document in Chrome, or with it disabled then the option is offered to download it, but either way I can get it it via Chrome without having to run Internet explorer in another browser window.

Reader 9.2 - "can not be used to view PDF files in a web browser"

Hello,
I recently deployed Adobe 9.2 within our organization. I used the Adobe Customization Wizard 9 to transform the install set, and selected the "Display PDF in Browser" option as default.
When opening a PDF linked from a web URL, we get the message: "The Adobe Acrobat/Reader that is running can not be used to view PDF files in a Web Browser. Adobe Acrobat/Reader version 8 or 9 is required. Please exit and try again." This occurs under IE8 and IE6, in both Windows XP SP2 and Windows 7.
If I launch Adobe Reader and unselect "Display PDF in Browser" in preferences, PDFs open normally.

I think I have discovered the answer to my own question!
I have disabled Adobe Reader plug-in, and can now see PDFs in Chrome.
(Steps: Chrome Menu, Settings option, Click Advanced Settings link, then Content Settings button, then select Disable Individual Plug-Ins, and a list of plug-ins is offered to enable or disable).
I then get a different result depending on whether or not Chrome PDF viewer is enabled - with it enabled I see the PDF document in Chrome, or with it disabled then the option is offered to download it, but either way I can get it it via Chrome without having to run Internet explorer in another browser window.

Adobe Acrobat/Reader can not be used to view PDF's in Web browser.

Does any one came accross the following message trying to view PDF's in web browser? "Adobe Acrobat/Reader that is running can not be used to view PDF documents in Web browser. Please exit the Acrobat?Reader application and try again". Thanks for your help! Barbara

http://helpx.adobe.com/acrobat/using/display-pdf-browser-acrobat-xi.html

Adobe 9.1.3 and FireFox 3.5.1+ "...can not be used to view PDF files in a Web Browser"

This is the issue but I'm not sure there is a resolution:
Firefox: Version 3.5.1
Adobe: Version 9.1.3
When navigating the web, click a URL that opens a PDF inside the browser and you get an error * "The Adobe Acrobat/Reader that is
running can not be used to view PDF files in a Web Browser". Please exit Adobe Acrobat/Reader and exit your Web Browser and try again". I did read a post that doing a "repair" from the Adobe Reader application should fix this, they also reference a few registry keys to check becuase the post states it's lost the application path to Adobe version X. I don't necessarily buy that "fix" and here are my details below.
In FireFox if you navigate to Tools > Options > Applications > Adobe Acrobat Document
You're given choices:
Always ask: DOES NOT WORK, produces afore mentioned error *
Save File: Works, saves the file to a directory on your PC
Use Adobe Reader 9.1 (defau...: Works, opens your PDF's outside of your web browser
Use Adobe Acrobat (in Firefox): DOES NOT WORK, produces afore mentioned error *
Use other...:
IE seems to just work as expected.
If you open Adobe Reader > Edit > Preferences > Internet > Check "Display PDF in browser" - DOES NOT WORK, produces afore mentioned error *
This would seem to be an Adobe error rather than a FireFox web browser problems since FireFox does seem to know the correct path although I suppose you can't rule out that this is a FireFox problem since 2 out of the 4 PDF open options DON'T WORK.
Any thoughts on this issue would be greatly appreciated.
Other information:
Adobe 8.1.5 works perfectly with FF 3.5.1+ when opening PDF's in the web browser, we also had no problems with previous versions either.
MSI push via Active Directory from Adobe 8.1.5 upgrade to Licensed Distribution I signed up for, Adobe 9.1.3 which was upgraded from 9.1.0, to 9.1.2, to 9.1.3 via an MSP patch.
Operating system: Windows XP SP 2, plenty of RAM, plenty of Drive
IE version this works with the new version of Adobe 9.1.3 is version 7 (7.0.5730.13)
Our FireFox MSI's come from Front Motions website and as far as I know we've never had problems with their MSI's, also tried the new release of FF 3.5.2 from their website.
I think that about covers it. Anyone else experiencing the same problems or have a patch?

After troublshooting this for the entire day today the issue seems to be a MIME problem.
If everything is woking perfectly, in Tools > Options > Applications...
You should see 4 or more things related to Adobe like "Adobe Acrobat Forms Document", etc. If you don't see at least 4 MIME entries either your Adobe installation is hosed or your FF installation is hosed. I haven't figured out which is causing the issue.
What I did was remaster my patches from my original Adobe 9.1.0 MSI with the two updates via the command line in the directories with the source files. On the 9.1.0 original file I first remastered my MST transform with the Adobe MST utility. I then applied my patches.
msiexec /a AcroRead.msi /p AdbeRdrUpd912_all_incr.msp
msiexec /a AcroRead.msi /p AdbeRdrUpd913_all_incr.msp
I then uploaded that to my network share, unlinked my group policy, made a new group policy, added a batch file to delete adobe.com from program file and the desktop on system startup even though my MST was supposed to take care of that - it's not a perfect world is it? :-)
I then reapplied my GPO's for both FireFox 3.5.2 and Adobe 9.1.3, I checked to make sure the MIME extensions were there and they were. You might have to go into your Adobe Preferences and select that open in browser setting depending on what happens or adjust your MIME settings in FireFox's options but it should work.
That's what worked for me. It's possible a few other things I did along the way tweaked it out, in my group policy on the first run I did select to upgrade previous group policies, for the remaster and repush I didn't select any previous GPO's to upgrade.
It's hard to tell what one thing tweaked it out or what combination of things tweaked out the install. I did also reinstall Adobe 8.1.5 and FF 3.0.10 before doing all this since our machines currently have that setup, I'm not sure if that affected it either, it's just hard to tell but I don't think it did simply because I had done that several times in troubleshooting this issue.
If anyone else has more specifics that would be great!

I cannot open pdf files from one supplier when using Adobe Reader but I can using another Viewer

I cannot open pdf files from one supplier when using Adobe Reader but I can open it if using Google PDF viewer or another viewer. The Adobe reader gives the error "There was an error opening this document. The file is damaged and could not be repaired" when I try to open the file. The version of Adobe Reader is 10.1.7, however I have tried other versions and they all fail the same way. I have tested on a number of different PC's in different networks and all fail using Adobe Reader but work using alternate viewer. Also the PC's will open a PDF from any other source.

Newer Reader versions are more strict than older versions (and other PDF viewers). If certain minimum requirements are not met, Reader will tell you that the PDF is damaged. This can happen when a document was created with software that does not adhere to PDF standards, or when the file was damaged during a download or email transmission.
You should contact the creator of these PDFs.

Open BI Publisher report using URL View activity

Hi,
i need to call BI Publisher report and I want to use URL View activity (i followed instruction on http://oraclebizint.wordpress.com/2007/07/30/customizing-obi-ee-%e2%80%93-go-url-parameters/ but i can't have HTML Form inside af:form)
But parameters on URL View activity are visible and i have to send username and pass..
Is there another way?
Tnx.
Andreja

Yes, I can put HTML form at top or bottom of page but i wanted to put in panelCollection (because of page design)....
but I will think out something to look nicely too :)
Tnx

How do I merge more than one PDF document into one singular pdf using adobe viewer touch on a microsoft surface?

How do I merge more than one PDF document into one singular pdf using adobe viewer touch on a microsoft surface?

Or using the Adobe PDF Pack https://www.acrobat.com/

My keyboard on macbook pro (laptop) is acting weird. One key is not responding at all. Have verified using Keyboard viewer and some other keys are printing the unresponsive character at random.

my keyboard on macbook pro (laptop) is acting weird. One key is not responding at all. Have verified using Keyboard viewer and some other keys are printing the unresponsive character at random. "z" is the unresponsive character.
Is it a damaged keyboard ?
The laptop is just 2 months old, will Apple replace it with a new one if its indeed a damaged keyboard or just repair, I use it for official purposes so being without a laptop is not much of an option.

No one here works for Apple, so we don't know what Apple might or might not do. If it's a genuine defect, they will of course repair it under warranty. It is not their responsibility if it effects your ability to work or not, so that's on you.
If, however, they determine that the key is problematic as a result of your misuse of the laptop, then everything is on you. And trust me, if they find a glob of dried up beer or coffee there, they will charge you.
Your only choice is to take it in for repair.

How to Use Transient View Objects to Store Session-level Global Variables

hi
Please consider section "40.8.5 How to Use Transient View Objects to Store Session-level Global Variables"
at http://download.oracle.com/docs/cd/E14571_01/web.1111/b31974/bcstatemgmt.htm#ADFFD19610
Based on this documentation I created the example application
at http://www.consideringred.com/files/oracle/2010/ProgrammaticalViewObjectAndRollbackApp-v0.01.zip
It behaves as show in the screencast at http://screencast.com/t/qDvSQCgpvYdd
Its Application Module has a Transient View Object instance "MyEmployeesContextVOVI", as master for the child View Object instance "EmpInCtxJobVI".
On rollback the Transient View Object instance keeps its row and attribute values.
Also when passivation and activation is forced (using jbo.ampool.doampooling=false ) the Transient View Object instance seems to keep its row and attribute values.
questions:
- (q1) Why does the expression #{bindings.MyEmployeesContextVOVIIterator.dataControl.transactionDirty} evaluate as true when a Transient View Object instance attribute value is changed (as shown in screencast at http://screencast.com/t/qDvSQCgpvYdd )?
- (q2) What would be a robust approach to make a Transient View Object instance more self-contained, and manage itself to have only one single row (per instance) at all times (and as such removing the dependency on the Application Module prepareSession() as documented in "5. Create an empty row in the view object when a new user begins using the application module.")?
many thanks
Jan Vervecken

Thanks for your reply Frank.
q1) Does sample 90 help ? http://blogs.oracle.com/smuenchadf/examples/
Yes, the sample from Steve Muench does help, "90. Avoiding Dirtying the ADF Model Transaction When Transient Attributes are Set [10.1.3] "
at http://blogs.oracle.com/smuenchadf/examples/#90
It does point out a difference in marking transactions dirty by different layers of the framework, "... When any attribute's value is changed through an ADFM binding, the ADFM-layer transaction is marked as dirty. ...".
This can be illustrate with a small change in the example application
at http://www.consideringred.com/files/oracle/2010/ProgrammaticalViewObjectAndRollbackApp-v0.02.zip
It now shows the result of both these expressions on the page ...
#{bindings.MyEmployeesContextVOVIIterator.dataControl.transactionDirty}
#{bindings.MyEmployeesContextVOVIIterator.dataControl.dataProvider.transaction.dirty}... where one can be true and the other false respectively.
See also the screencast at http://screencast.com/t/k8vgNqdKgD
Similar to the sample from Steve Muench, another modification to the example application introduces MyCustomADFBCDataControl
at http://www.consideringred.com/files/oracle/2010/ProgrammaticalViewObjectAndRollbackApp-v0.03.zip
public class MyCustomADFBCDataControl
extends JUApplication
@Override
public void setTransactionModified()
    ApplicationModule vApplicationModule = (ApplicationModule)getDataProvider();
    Transaction vTransaction = vApplicationModule.getTransaction();
    if (vTransaction.isDirty())
      super.setTransactionModified();
}Resulting in what seems to be more consistent/expected transaction (dirty) information,
see also the screencast at http://screencast.com/t/756yCs1L1
Any feedback on why the ADF Model layer is so eager to mark a transaction dirty is always welcome.
Currently, question (q2) remains.
regards
Jan

Using database views in ADF mobile client application

Hi,
I am using Jdeveloper 11.1.1.4 and WLS 10.3.4.
I have developed a POC in ADF mobile client application both with and without synchronization. However, both work with entity objects based on tables.
I need to use database views instead of tables. When I try to include entity object (based on views) in the view object, it shows an error saying "Only the entity objects based on tables can be selected"
Please guide me if there is a work around for this.
Also, please let me know if there is way to develop an ADF mobile client application skipping the use of entity objects at all and using view objects directly to specify the database query and fetch data from the database.
Thanks in advance.
Ansh
Edited by: ansh on Mar 28, 2011 5:40 AM

Hi, Ansh:
Currently, out of box, ADF Mobile Client does not support synchronization against Database Views. This is because Mobile Server imposes some schema restrictions to ensure synchronization with multi-table views would work correctly. This schema restriction requires, for example, the view must have a primary parent table with key defined, and also all base table must be included in the data publication. These dependencies requires manual resolution and advanced planning, and is managed outside of the ADF Mobile Client/JDeveloper project.
To continue development, you would need to create server Entity Objects directly against the base tables. You can then create the mobile ADF Business Component (EOs, VOs, etc). You can then create View Objects in your ADF Mobile Client application based on the database views, in order to retrieve the data you need exactly. In other words, instead of basing EO on the database view, create View Objects in the mobile applicaiton to mimic what you had in the View Object.
Is there any other reason why you would need to access data via database views, instead of directly against base tables?
Thanks,
Joe Huang

How to Create a BC4J messageChoice using an View?

I just started using UIX (today in fact) and would like to know how to use a View Object to populate a BC4J messageChoice.
I've created an form to update a table. One of the fields is cost center. I store the different cost centers in a seperate table. Then I store the id of the costCenter in the project table. I don't want to hard code the different centers into the application but pull them from the database (using a BC4J view). Can someone point me in the right direction?
Thanks!

That worked! But when I hit the update button the messageChoice fields will not update in the database. All the other fields do. No errors are displayed either, am I missing something?
Here is the code from the messageChoice...
<bc4j:messageChoice prompt="Status"
attrName="ProjectStatusId">
<contents>
<bc4j:optionList voName="ProjectStatusView"
attrName="ProjectStatusId"
textAttrName="Description" />
</contents>
</bc4j:messageChoice>

How to create repository using a view in OBIEE

Hi,
Can any one explain the procedure how to create a repository using a view. For example
test_v
select a.col1,a.col2,b.col1,b.col4,c.col5,c.col6 from table a,table b, table c where a.col1= b.col1 and b.col1 = c.col1
1. Assuming that i have imported only one view.
Thanks and Regards,
Hanuman.

Hi,
You can create the vie in the physical layer of your repository, select "Select" from the dropdwan box when you create a new table. Next add the columns. They must have the same names as in your view.
If you don't have any other tables in your repository, created an alias of your view and make a "dummy" join with the original view. Next create your BM and PL.
regards
John
http://obiee101.blogspot.com/

Use of View in NWDS

Similar Messages

Maybe you are looking for