Use of windows default printer causes labels to be mis-printed.
I am printing a crystal report via the vb.net viewer to an avery dennison label printer.
I have configured the size of the label for the avery dennison into the Seagull driver that exists on the workstation where I am printing the report.
The crystal report has been configured to use the printer name and page size from the driver on the workstation.
When I make the Avery Dennison printer on the workstation the windows default printer and print the report to the Avery Dennison printer, the label prints out correctly.
When I make another printer on the workstation the windows default printer and print the label to the Avery Dennison printer, the label prints across two labels.
Any ideas?
Hi Praveen,
#No of Copies# in transaction /SCWM/PRWO6 is not actual number of copies . This is more an index how the number of copies is determined . Please use F4 on this field and you will see that index 2 means "Number of Copies" = 1.
In Transaction /SCWM/ 60000431 you need to actual number of copies for your document. But this number is only taken if you set the index in /SCWM/PRWO6 to "0".
I hope this information helps you.
Sabya
Similar Messages
-
Not printing the label in the zebra printer for 4 X 7 inch size
Dear all,
Iam trying to print the barcode in the label of size 4.00 X 7.00 inche in smartforms , for which i have created a page format in SPAD with 4 x 7 inch and specified the same in Form interface and specified 4.00 x 6.00 inche in the MainWindow of smarforms,
im getting the print preview ,but it is not printing it in the printer, i checked with the zebra printer set up also and in the printing preferences i gave it as user defined.
but when i tried with page size of 4.00 x 6.00 , it is printing without any problem. but my requirement i need to print that in 4.00 x 7.00.
Can anybody guide me how to resolve this.
thanks in advance. Points assured.sorted out by setting the SPAD - Device types
format, just added the zxxx format to this and now it is working -
Usb for 1510 all-in-one printer causing problems with it accepting print jobs
I am having trouble downloading the driver for a 1512 all-in-one printer. It was working for about a week and it is not working now. I loaded the suggested driver 1510 all-in-one driver but when I get to plugging in the usb from my Windows 7 laptop to the printer, it does not feel it is connected. I can print items that I scan but am puzzled how it will not print. The only thing I have deduced is I need a new usb cable. I bought on ebay as I've always had good luck with hp products.
Sparky325I decided that in spite of the fact that it had previously printed, I got another USB cord and used that and then the printer worked. The one I received with the printer must have been too loose to make a connection. This one feels snug when i need to print from my laptop. Thanks for your help. Sparky 325
-
Logo printing on label output from Zebra printer
Hi guru, I am new to zpl command and I cannot find out how SAP is compiling the logo object and load into SAPSCRIPT. Bascially, our company is using zebra printer to print out receiving label with logo on it. There is a requirement to change the logo. What should be the steps?
The transaction I was told to use is OMCF. I can see the precompile file path/name is listed in each label text object. Something list C:\BARONER3\Logos\logo1.bmp or C:\Logos\logo2.bmp. If I need to change a new bmp file for the logo, how should I do it?
Also, is there any good documentation about BAR-ONE and ZPL command?
According to SAP help, the label design is done in BAR-ONE then the print file is downloaded as .ITF format and import into SAPscript as standard text using SO10. However, I cannot find any standard text in SO10 which have the same text ID and text name as in OMCF -> Text Object.....what is the connection between the Standard text and the OMCF text object?
Any advise on the details step to how to create a simple logo/barcode label using BAR-ONE and SAP is greatly appreciated.
Thank you.
MinamiHi Minami,
Please check the transaction SE 78 here you can upload new logo or pic with some retriction on size compnay logo should not be a problem.Then you can change the logo.I think this link might be of use to you.I am sending you link
[SAP LOGO|Logo in sapScript;.
For SAP Barcode Documentation Please refer this SAP Library Link:
[Barcode|http://help.sap.com/saphelp_nw04/helpdata/en/68/4a0d5b74110d44b1b88d9b6aa1315b/content.htm]
Have a best day ahead. -
Photoshop CS5.1 won't print if Labels ticked off on print panel
Just deployed photoshop CS5.1 over the whole office, on various versions of mac OS from 10.6 to 10.9. In the Output options over on the right side of the print panel, if the "Labels" option is ticked off, then the job never comes out of the printer (konica-minolta C360). The job appears to go -- everything on the print queue looks like it is communicating with the printer, sending the data, reporting consumables that are low, etc -- just like it prints when the Labels are not ticked. The only difference is that if "Labels" is ticked then there is no sign at the printer of the job existing. The data light doesn't flash, the job never appears in the queue, no errors. It's like somewhere between computer and printer it just gets lost!
Third party junk is getting in the way:
0x256b000 - 0x256bfff org.xlife.InquisitorLoader 3.2 (61) /Library/InputManagers/Inquisitor/Inquisitor.bundle/Contents/MacOS/Inquisitor
0x27c1000 - 0x27e3fff org.xlife.InquisitorCore 3.2 (61) /Library/InputManagers/Inquisitor/Inquisitor.bundle/Contents/Resources/Inquisit orCore.bundle/Contents/MacOS/InquisitorCore
0x15df7000 - 0x15e73fff com.conduit.cttoolbar 1.0.2.7 (1027) /Library/Application Support/Conduit/Plugins/cttoolbar.bundle/Contents/MacOS/ct_plugins
0x7f6000 - 0x7f7fff com.yourcompany.ct_loader ??? (1.0.2.7) /Library/InputManagers/CTLoader/ctloader.bundle/Contents/MacOS/ctloader
Remove them. -
When I try to print from Firefox, the Adobe PDF printer is pre-selected in the printer dialog box, even though my default windows printer is a laser jet.
Both printers work just fine, but changing printers every time is a nuisance.
This happens whenever I print anything on Firefox, including emails.Sorry, Firefox doesn't use the Windows "default printer" as the default printer, but rather it uses the last used printer as the "default". That doesn't always happen when the printer involved goes into stand-by and is "offline", from what I have seen on my small LAN.
Just one of the hundreds of print related Bugs or nuisances in Firefox that I doubt will ever be fixed, until they write all new code for printing -
Printing 1 Label in Row and Column Other Than Row 1, Column 1
I want to print 1 label and want to print it on Avery label stock in a row and column other than row 1, column 1. I'm using Avery Labels 8163. I can select the row and column I want to print on in Word but can't figure out how to do it in *Address Book*. Anyone know how to do this?
You can't do that in Addrress Book. But you can use pearLabelizer to do that. Be sure you download and install the appropriate Label Definition file and name it as such so you can select it from the pop-up list in the program's Preferences window.
-
I cannot print return label because I don't register. Please help me.
I order iphone5 from Apple online store .
When I buy, I don't log-in Apple ID
(I bought in the name of the "Guests.")
Now I want to print return label.
It cannot print, Because The website asks for Apple ID
If I use my Apple ID Website call me "The signed in account does not have access to this order."
I cannot use my Apple ID to print it.
Now I have only order code.
How can I print?Hi Leopallo,
Are the trojan remover and the farbar service scanner
3rd-party tools?
We may first take a try with the SFC tool and see if it could fix the errors:
Open CMD in admin rights, then type:
SFC /scannow
Then press enter.
If we have backup available, please try take a system restore.
http://windows.microsoft.com/en-hk/windows7/products/features/system-restore
If we don’t have any backup available, we may consider to do a repair install (upgrade install) with the installation Disk.
Start your computer from a Windows 7 installation disc or USB flash drive
http://windows.microsoft.com/en-hk/windows7/start-your-computer-from-a-windows-7-installation-disc-or-usb-flash-drive
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support -
Trouble Printing Address Labels
I using the Canon Pixma MG 2120 printer.
I'm using Hallmark Card Studio 2012 with Avery 5160 trying to print a page of 30 address labels.
The Canon printer is making me print one label at a time even when I set it to print 30 labels.
My previous printer printed the 30 labels all at once.
Printing 1 label at a time is time consuming.
Do I have something set incorrectly? Thank you for any help you can give me.Hello Dawter.
Most Avery labels provide instructions or recommended "template" options to use when printing their labels. Please check to see if an information slip or sheet was included with your labels. This would give information on what label template to use.
If you continue to have difficulties, you may have to print the labels from a different program such as Microsoft Word.
This didn't answer your question or issue? Find more help at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. -
i use PC windows 7 i downloaded new version fire fox i cant print wireless to my hp printer it is set as default when i chose it from drop down it wont let me and it stays on the konica after down load new fire fox and chose disable option not compatible
Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.) -
We bought a DYMO Label Writer 4XL. We want to print thermal labels from our Mac and PC, wireless. The good thing is that I already have the printer set in the network and added on each of our computers (Mac and Windows 8). For printing regular labels you can use the Dymo software; for printing postage labels from ebay or paypal has been impossible.
From ebay I even tried one label at the time but still did not work. I sent the the print command from the mac-print-window, changing each of the settings (such as paper size) but did not work. Each time (no matter if you want to print one label only) it advances more than one lable.
http://community.ebay.com/t5/Miscellaneous/Using-a-thermal-printer-for-eBay-labe ls-using-a-Mac/qaq-p/3135261 (post by stormshock)
Through Paypal is a different story. It should be easy cause it seems the Zebra Driver in Paypal works with this DYMO. The issue is how to get the system to send the print command to the DYMO printer through the Zebra LP2488? please help! I know some people have succeded making all these work. What am I missing?
http://www.amazon.com/review/R3E73A6ZX39ZZQ/ref=cm_cr_pr_cmt?ie=UTF8&ASIN=B002M1 LGJ4&linkCode=&nodeID=&tag=#wasThisHelpfulTo whomever is reading this post I just wanted to let you know I returned the Dymo 4XL. Their customer service is horrible. Technical support does not exist at all. The issue was extremely frustrating and time consuming. I do not recommend this thermal printer at all. Good luck finding one... if you do, please share.
-
Printing sapscript label using zebra printer
Hi,
Can anybody please help me regarding "printing sapscript label using zebra printer"?
i hav set the following print default settings in the transaction mb90:
output device :
NO01
device type: YZZX_ZEB
but when i try to print ,i am getting error message stating that "the respective sapscript form is not active ".
i hav also attached my print program for ur easy reference.
====================================================================*
FORM open_form_slv.
*' Description:
*' Add information for the SAP spooler
*' Change the name of the standard customized form for Zebra print
*' Last Change Vers Programmer Reason
*1
DATA: BEGIN OF print_infos.
INCLUDE STRUCTURE itcpo.
DATA: END OF print_infos.
DATA: form_name(16) TYPE c, char1(1) TYPE c, ind_beg TYPE i.
PERFORM itcpo_fuellen.
MOVE-CORRESPONDING itcpo TO print_infos.
WRITE sy-datum USING EDIT MASK '__.__.____'
TO print_infos-tdcovtitle+1.
WRITE sy-uzeit USING EDIT MASK '__:__:__'
TO print_infos-tdcovtitle+12.
CONCATENATE itcpo-tddest sy-uname ' PO'(001) ekpo-ebeln ' Doc.No'(002)
mseg-mblnr print_infos-tdcovtitle
INTO print_infos-tdcovtitle SEPARATED BY space.
form name from the table YZZM_GR_LABEL
IF NOT g_fonam IS INITIAL.
tnapr-fonam = g_fonam.
ENDIF.
if the used printer is a Zebra label printer, then the customized
layout set name ???_???_XXX will be changed to ???_???_ZP
SELECT SINGLE * FROM tsp03d WHERE padest = nast-ldest.
IF tsp03d-patype = 'YZZX_ZEB'.
ind_beg := 15.
WHILE ind_beg > -1.
char1 := tnapr-fonam+ind_beg. " substr(tnapr-fonam,ind_beg,1)
IF char1 = '_'.
form_name := tnapr-fonam(ind_beg).
CONCATENATE form_name '_ZP' INTO tnapr-fonam.
EXIT.
ENDIF.
ind_beg := ind_beg - 1.
ENDWHILE.
ENDIF.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
device = 'PRINTER'
language = language
OPTIONS = print_infos
form = tnapr-fonam
dialog = ' '.
x_open := x.
IF mseg-weanz = 0. mseg-weanz = 1. ENDIF.
IF syst-tcode <> 'MB90' AND NOT g_flag_popup IS INITIAL.
check for requirement of printing label and ask for gr-quantities (popup)
SELECT SINGLE * FROM yzzm_gr_quantity WHERE ebeln = mseg-ebeln.
CLEAR yzzm_gr_quantity-no_popup.
ELSE.
and ask not for gr-quantities
IF syst-tcode = 'MB90'.
yzzm_gr_quantity-erfmg := mseg-menge.
ELSE.
yzzm_gr_quantity-erfmg := mseg-menge / mseg-weanz.
ENDIF.
yzzm_gr_quantity-no_popup := x.
ENDIF.
determination inspection lot number
CLEAR qals-prueflos.
SELECT SINGLE * FROM qals WHERE mblnr = mseg-mblnr
AND zeile = mseg-zeile
AND mjahr = mseg-mjahr.
determination vendor batch
CLEAR mch1-licha.
SELECT SINGLE * FROM mch1 INTO mch1 WHERE matnr = mseg-matnr
AND charg = mseg-charg.
ENDFORM. "open_form_label
=================================================================== *
FORM we01_print_slv.
*' Description:
*' print out of hazardous symbol
*' controls the Zebra printer
*' Last Change Vers Programmer Reason
*****26.09.2007 Starts
DATA: l_objky TYPE nast-objky,"Object key
l_vstat TYPE nast-vstat. "Processing status of message
*****26.09.2007 Starts
TABLES: mgef, t300.
FIELD-SYMBOLS: .
DATA: aux_index LIKE sy-index.
DATA: count_haz_sym, position TYPE n, zw TYPE p DECIMALS 1.
DATA: aux_value(5) TYPE c.
DATA: txt(10) TYPE c, pos(5) TYPE c.
t001w-werks = r_werks.
t001w-name1 = r_name1.
PERFORM read_address.
*2
SELECT SINGLE * FROM ekpo WHERE ebeln = mseg-ebeln
AND ebelp = mseg-ebelp.
CLEAR mara-stoff.
SELECT SINGLE stoff INTO mara-stoff FROM mara WHERE matnr = mseg-matnr.
IF NOT mara-stoff IS INITIAL.
CLEAR t300.
SELECT SINGLE * FROM t300 WHERE lgnum = mseg-lgnum.
IF NOT sy-subrc IS INITIAL.
for plants without warehouses try to use the country code
CASE mseg-werks.
WHEN 'BUP'.
t300-regkz := 'US '.
ENDCASE.
ENDIF.
CLEAR mgef.
SELECT SINGLE * FROM mgef WHERE stoff = mara-stoff
AND regkz = t300-regkz.
ENDIF.
in case of more then one label, use for each a new output window
(not only for the first)
IF g_count > 1.
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
command = 'NEW-WINDOW'.
ENDIF.
Ausgabe Gefahrstoffsysmbole Neustadt, V.Hilgert 14.07.98
*For output type YNL7, the hazardous warning symbol has to be printed at the bottom of the label.So label is called before that.
IF tnapr-kschl = 'YNL7'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'LABEL'.
ENDIF.
count_haz_sym = 0. position = 0.
WHILE count_haz_sym = 'XN'.
For output type YNL7, the width of the standard text is small.
IF tnapr-kschl = 'YNL7'.
zw = position * '0.2' + '0.1'. pos = zw.
ELSE.
zw = position * '1.3' + '0.1'. pos = zw.
ENDIF.
IF tsp03d-patype = 'YZZX_ZEB'. " device type for ZEBRA label priter
aux_value := count_haz_sym.
ELSE.
aux_value := pos. " HP/Kyocera or other laser printer
ENDIF.
CALL FUNCTION 'TEXT_SYMBOL_SETVALUE'
EXPORTING
name = '&XPOS&'
value = aux_value
EXCEPTIONS
OTHERS = 1.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element =
window = 'MAIN'
EXCEPTIONS
element = 1
function = 2
type = 3
unopened = 4
unstarted = 5
window = 6
OTHERS = 7.
IF sy-subrc = 0.
*Varying the position for YNL7
IF tnapr-kschl = 'YNL7'.
position = position + 2.
ELSE.
position = position + 1.
ENDIF.
ENDIF.
ENDIF.
ENDWHILE.
IF NOT mseg-vfdat IS INITIAL.
am07m-mhtxt = text-105.
ENDIF.
IF NOT am07m-mhdat IS INITIAL.
am07m-mhztx = text-106.
ENDIF.
IF ekko-bsart = 'UB'.
am07m-litxt = text-101.
am07m-libzg = ekko-reswk.
ELSE.
am07m-litxt = text-100.
am07m-libzg = ekko-lifnr.
ENDIF.
belpos-mblnr = mkpf-mblnr.
belpos-zeile = mseg-zeile.
CONDENSE belpos NO-GAPS.
am07m-belpos = belpos.
IF t156-shkzg = h.
am07m-hdlne = text-020.
ELSE.
am07m-hdlne = text-010.
ENDIF.
Ausgabe der Etiketten mit den ind. Mengen
IF NOT g_flag_popup IS INITIAL.
SELECT SINGLE * FROM yzzm_gr_quantity WHERE ebeln = mseg-ebeln
AND weanz = g_count.
ELSE.
* print the number of labels is handeled by the Zebra printer
IF tsp03d-patype = 'YZZX_ZEB'. " device type for Zebra label prts
g_lbls_tot := mseg-weanz - g_count + 1.
g_break_print := x.
ENDIF.
ENDIF.
mseg-erfmg := yzzm_gr_quantity-erfmg.*
********26.09.2007 Starts
CONCATENATE mseg-mblnr mseg-mjahr mseg-zeile INTO l_objky.
SELECT SINGLE vstat INTO l_vstat FROM nast WHERE kappl = 'ME' AND
objky = l_objky AND
kschl = 'YNL7'.
********26.09.2007 Ends
CALL FUNCTION 'TEXT_SYMBOL_SETVALUE'
EXPORTING
name = '&nummer&'
value = g_count.
IF tnapr-kschl <> 'YNL7'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'LABEL'.
else.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'BAR_CODE'
EXCEPTIONS
ELEMENT = 1
FUNCTION = 2
TYPE = 3
UNOPENED = 4
UNSTARTED = 5
WINDOW = 6
BAD_PAGEFORMAT_FOR_PRINT = 7
SPOOL_ERROR = 8
CODEPAGE = 9
OTHERS = 10.
IF sy-subrc <> 0. MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
ENDFORM. "GR_label_print
*& Form lesen
text
-->OBJKY text
FORM lesen USING objky.
nast_key = objky.
CLEAR retco.
SELECT SINGLE * FROM mkpf WHERE mblnr = nast_key-mblnr
AND mjahr = nast_key-mjahr.
SELECT SINGLE * FROM mseg WHERE mblnr = mkpf-mblnr
AND zeile = nast_key-zeile
AND mjahr = mkpf-mjahr.
IF sy-subrc NE 0.
retco = sy-subrc.
EXIT.
ENDIF.
PERFORM tab156_lesen.
xskkz = t156-rstyp.
PERFORM tab001w_lesen.
IF NOT mseg-evers IS INITIAL. "Versandvorschriften lesen.
PERFORM t027_lesen.
ENDIF.
PERFORM bestellung_lesen.
IF NOT ekpo-knttp IS INITIAL AND NOT
ekpo-weunb IS INITIAL.
PERFORM kontierung_lesen. "für multikontierte Bestellungen
ENDIF.
IF NOT mseg-ematn IS INITIAL.
PERFORM lesen_htn.
ELSE. "111277/PH
CLEAR am07m-mfrpn. "111277/PH
ENDIF.
IF mseg-matnr IS INITIAL.
mseg-menge = mseg-bpmng.
mseg-meins = mseg-bprme.
PERFORM bestelltext_lesen.
CLEAR mabdr.
ELSE.
PERFORM material_lesen.
ENDIF.
PERFORM tab024_lesen.
PERFORM t064b_lesen.
PERFORM ladr_lesen.
ENDFORM. "lesen
Lesen für WE-Schein Fert.Auftrag -
FORM lesen_wf USING objky.
nast_key = objky.
CLEAR retco.
SELECT SINGLE * FROM mkpf WHERE mblnr = nast_key-mblnr
AND mjahr = nast_key-mjahr.
SELECT SINGLE * FROM mseg WHERE mblnr = mkpf-mblnr
AND zeile = nast_key-zeile
AND mjahr = mkpf-mjahr.
IF sy-subrc NE 0.
retco = sy-subrc.
EXIT.
ENDIF.
PERFORM tab156_lesen.
xskkz = t156-rstyp.
PERFORM tab001w_lesen.
PERFORM auftrag_lesen.
IF NOT mseg-matnr IS INITIAL.
PERFORM material_lesen.
ELSE.
mseg-menge = mseg-erfmg.
mseg-meins = mseg-erfme.
ENDIF.
PERFORM tab024d_lesen.
PERFORM t064b_lesen.
PERFORM ladr_lesen.
ENDFORM. "lesen_wf
Lesen für Warenausgang -
FORM lesen_wa USING objky.
nast_key = objky.
CLEAR retco.
SELECT SINGLE * FROM mkpf WHERE mblnr = nast_key-mblnr
AND mjahr = nast_key-mjahr.
SELECT SINGLE * FROM mseg WHERE mblnr = mkpf-mblnr
AND zeile = nast_key-zeile
AND mjahr = mkpf-mjahr.
IF sy-subrc NE 0.
retco = sy-subrc.
EXIT.
ENDIF.
PERFORM tab156_lesen.
xskkz = t156-rstyp.
PERFORM tab001w_lesen.
IF NOT mseg-matnr IS INITIAL.
PERFORM material_lesen.
ENDIF.
PERFORM ladr_lesen.
ENDFORM. "lesen_wa
Druck Vorbereiten -
FORM open_form.
PERFORM itcpo_fuellen.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
device = 'PRINTER'
language = language
OPTIONS = itcpo
dialog = ' '.
PERFORM lesen_t159p.
x_open = x.
ENDFORM. "open_form
Druck Vorbereiten Sammelscheine -
FORM open_form_sammel.
PERFORM lesen_t159p.
PERFORM itcpo_fuellen.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
device = 'PRINTER'
language = language
OPTIONS = itcpo
form = tnapr-fonam
dialog = ' '.
x_open = x.
ENDFORM. "open_form_sammel
Druck schließen -
FORM close_form.
CHECK NOT x_open IS INITIAL.
CALL FUNCTION 'CLOSE_FORM'.
CLEAR x_open.
ENDFORM. "close_form
Hilfsfelder versorgen für Sammelscheindruck -
FORM helpdata1.
*mkpf = mkpf.
*mseg-lgort = mseg-lgort.
*ladr = ladr.
save_mkpf = *mkpf-usnam.
save_mblnr = *mkpf-mblnr.
save_budat = *mkpf-budat.
save_cpudt = *mkpf-cpudt.
save_ematn = *mseg-ematn.
save_lgort = *mseg-lgort.
save_ladr = *ladr.
*t001w = t001w.
save_werks = *t001w-werks.
save_name1 = *t001w-name1.
*ekko = ekko.
*am07m = am07m.
save_lifnr = *ekko-lifnr.
save_ebeln = *ekko-ebeln.
save_ekgrp = *ekko-ekgrp.
save_linam = *am07m-name1.
save_lina2 = *am07m-name2.
*t024 = t024.
save_eknam = *t024-eknam.
save_ektel = *t024-ektel.
*mkpf-usnam = old_mkpf.
*mkpf-mblnr = old_mblnr.
*mkpf-cpudt = old_cpudt.
*mkpf-budat = old_budat.
*mseg-ematn = old_ematn.
*mseg-lgort = old_lgort.
*ladr = old_ladr.
*t001w-werks = old_werks.
*t001w-name1 = old_name1.
*t024-eknam = old_eknam.
*t024-ektel = old_ektel.
*ekko-lifnr = old_lifnr.
*ekko-ebeln = old_ebeln.
*ekko-ekgrp = old_ekgrp.
*am07m-name1 = old_linam.
*am07m-name2 = old_lina2.
save_lfa1 = lfa1.
IF NOT old_lfa1 IS INITIAL.
lfa1 = old_lfa1.
ENDIF.
ENDFORM. "helpdata1
--- Versorgung der Hilfsfelder vor CLOSE_FORM bei Sammelscheindruck --
FORM helpdata2.
old_lfa1 = save_lfa1.
lfa1 = save_lfa1.
old_mkpf = save_mkpf.
old_lgort = save_lgort.
old_ladr = save_ladr.
old_budat = save_budat.
old_cpudt = save_cpudt.
old_werks = save_werks.
old_name1 = save_name1.
old_mblnr = save_mblnr.
old_lifnr = save_lifnr.
old_linam = save_linam.
old_lina2 = save_lina2.
old_ebeln = save_ebeln.
old_ekgrp = save_ekgrp.
old_eknam = save_eknam.
old_ektel = save_ektel.
old_ematn = save_ematn.
*mkpf-usnam = save_mkpf.
*mkpf-mblnr = save_mblnr.
*mkpf-budat = save_budat.
*mkpf-cpudt = save_cpudt.
*mseg-ematn = save_ematn.
*mseg-lgort = save_lgort.
*ladr = save_ladr.
*t001w-werks = save_werks.
*t001w-name1 = save_name1.
*t024-eknam = save_eknam.
*t024-ektel = save_ektel.
*ekko-lifnr = save_lifnr.
*ekko-ebeln = save_ebeln.
*ekko-ekgrp = save_ekgrp.
*am07m-name1 = save_linam.
*am07m-name2 = save_lina2.
ENDFORM. "helpdata2
Form Lesen Warenausgang Lohnbearbeiter -
FORM lesen_wlb USING objky.
nast_key = objky.
CLEAR retco.
SELECT SINGLE * FROM mkpf WHERE mblnr = nast_key-mblnr
AND mjahr = nast_key-mjahr.
SELECT SINGLE * FROM mseg WHERE mblnr = mkpf-mblnr
AND zeile = nast_key-zeile
AND mjahr = mkpf-mjahr.
IF sy-subrc NE 0.
retco = sy-subrc.
EXIT.
ENDIF.
PERFORM tab156_lesen.
xskkz = t156-rstyp.
PERFORM tab001w_lesen.
IF NOT mseg-matnr IS INITIAL.
PERFORM material_lesen.
ENDIF.
ON CHANGE OF mseg-lifnr.
PERFORM read_address.
ENDON.
ENDFORM. "lesen_wlb
*eject
Fuellen der ITCPO -
FORM itcpo_fuellen.
IF xscreen NE space.
*- Testausgabe auf Bildschirm -
itcpo-tdpreview = 'X'.
itcpo-tdnoprint = 'X'.
ELSE.
CLEAR: itcpo-tdpreview,
itcpo-tdnoprint.
ENDIF.
MOVE-CORRESPONDING nast TO itcpo.
itcpo-tdcover = nast-tdocover.
itcpo-tddest = nast-ldest.
itcpo-tddataset = nast-dsnam.
itcpo-tdsuffix1 = nast-dsuf1.
itcpo-tdsuffix2 = nast-dsuf2.
itcpo-tdimmed = nast-dimme.
itcpo-tddelete = nast-delet.
itcpo-tdcopies = nast-anzal.
itcpo-tdprogram = sy-repid.
ITCPO-TDTELELAND = US_COUNTRY.
itcpo-tdsenddate = nast-vsdat.
itcpo-tdsendtime = nast-vsura.
itcpo-tdnewid = x.
ENDFORM. "itcpo_fuellen
*eject.
------------ FORM lesen der Lagerortadr. ---------------------------*
FORM ladr_lesen.
DATA: BEGIN OF addr_sel.
INCLUDE STRUCTURE addr1_sel.
DATA: END OF addr_sel.
CLEAR ladr.
SELECT SINGLE * FROM twlad WHERE werks = mseg-werks
AND lgort = mseg-lgort
AND lfdnr = '001'.
IF NOT twlad-adrnr IS INITIAL AND sy-subrc IS INITIAL.
MOVE twlad-adrnr TO addr_sel-addrnumber.
ENDIF.
CALL FUNCTION 'ADDR_GET'
EXPORTING
address_selection = addr_sel
IMPORTING
sadr = ladr
EXCEPTIONS
OTHERS = 1.
ENDFORM. "ladr_lesen
**& Form REPRINT
text
*FORM reprint.
TABLES : nase.
DATA : x TYPE string.
IF nase-vermo = 2.
x = 'REPRINT'.
ENDIF.
*ENDFORM. "REPRINT
Kindly do the needful.
Thanks in advance
Regards
SwarnaHi Swarna,
CALL FUNCTION 'OPEN_FORM'
EXPORTING
device = 'PRINTER'
language = language
OPTIONS = print_infos
<b>form = tnapr-fonam</b>
dialog = ' '.
x_open := x.
I thing its not a good way to pass the Form name to the Parameter.
Try like,
data : temp_form like tnapr-fonam.
<b>form = temp_form</b>
Thanks. -
Cannot open, save, or print ship label on USPS website using Acrobat 11; Win 7; Internet Explorer 9.
USPS tech and supervisor spent 1 hour walking me through fixes of uninstalling, installing and changing options to no avail. The provider software (USPS, Adobe & Microsoft) works using other browsers (Google Chrome and Firefox) but not with Internet Explorer (any version as I've tried it with 8 and 9). No virus, malware or defects in any of the software. This problem seems to reoccur every time there is a new release from Adobe, Windows Explorer or the USPS. Has anyone found a solution?
Specifically, either of the "print or save label" prompts in the online postage software opens a dialogue bar that give 2 choices: save or cancel. The cancel option doesn't work at all; the bar stays open. The save option opens the operating system software to "desktop" but when the "save" option is selected there is no response. No way to get out of the dialogue bar without closing the usps web site. Each time I've had to go into the account history file and claim a refund for the unprintable label. Options I've tried to solve issue:
>added usps.com to trusted sites in IE under tools
>enabled manage add-on for Acrobat Reader
>disabled protected mode in IE options
>unchecked "require server verification"
>uninstalled and reinstalled latest versions of Acrobat 11; tried Acrobat 9 and 10 installs
>did "repair" of Acrobat 11
>reduced security levels for IE and USPS web site
>uninstalled/reinstalled IE 9 and IE 8.
Each software provider claims the other's products are at fault, not theirs.Thank you for your interest in my problem. USPS is the US Post Office. Mailing labels can be created, paid for and printed on their website, usps.com. The labels are in pdf format and their application uses Adobe Acrobat Reader to open the file where the label resides and then print it. Normally, you can select either "print" or "save" to open the file where the label resides and then you again have the option to immediately print the label or save it to your "desktop." I have printed or succcessfully saved hundreds of these labels, despite changes in the various versions of Acrobat Reader, Internet Explorer (IE) and the USPS software. After returning from a 2 week vacation on Oct 1, I rebooted my PC to create and print some labels and the fun began.
The USPS software works perfectly until the print or save stage. Using either prompt opens a bar in the lower part of the screen which then only offers the options of "save" or "cancel." ( So no way to print directly.) If you attempt to "cancel" it does not respond - just starts the bar blinking a golden color. If you attempt to "save," it opens to a screen to save to your desktop. When attempting to save at that point, the file will not save, there is no response. The bar can not be closed, the save to desktop doesn't work, and there is no way out of the loop. Even when closing or signing out of the website, the bar remains on the screen. Only by closing and reopening Internet Explorer will the bar disappear.
USPS supervisor and tech persons claim the problem is with IE since their software works with other browsers, e.g. Google Chrome and Foxfire - which I have confirmed. It's just annoying and time consuming to have to exit IE everytime I want to create and print a label. All other pdf files (whether downloaded from IE or created by myself) will print from IE using Adobe Acrobat Reader, just not the one associated with the USPS. What's astonishing is that the US Post Office doesn't mind that their program doesn't work with the world's most used web browser and they haven't been able to figure out why. You would think either Microsoft (IE's publisher) and the USPS would want to do a fix.
I have scoured and tested all setup and setting options in the Adobe, IE, USPS software, including roll back to earlier versions and haven't been able to solve it on my own. -
How to print the report directly without previewing (report viewer) using c# windows application
Hi,
Currently, we are using crystal report to all of our reporting applications, but since I/users have encountered some issues about CR's speed to load only a simple report, maybe it is now time for us to adopt a new reporting environment in which I think SSRS
can fill this problem.
To start with, I have here a sample code, that uses the crystal report to print the report directly without previewing:
csCashInvoiceCal csCashCal; --Crystal report name .rpt
dsCsReceipt dsCs; --created dataset
DataTable u;
DataRow s;
private System.Drawing.Printing.PrintDocument printDocument1;
private System.Windows.Forms.PrintDialog printDialog1;
ParameterValues paramValue;
ParameterDiscreteValue discreteValue;
ParameterFieldDefinition fieldDefinition;
private void btnPrint_Click(object sender, EventArgs e)
this.Cursor = Cursors.WaitCursor;
loadReceipt2();
print2();
csCashCal.Close();
this.Cursor = Cursors.Default;
private void loadReceipt2()
dsCs = new dsCsReceipt(); --created dataset
u = dsCs.Tables.Add("DtCsReceipt");
u.Columns.Add("Qty", Type.GetType("System.String"));
u.Columns.Add("UOM", Type.GetType("System.String"));
u.Columns.Add("Description", Type.GetType("System.String"));
u.Columns.Add("UnitPrice", Type.GetType("System.String"));
u.Columns.Add("Discount", Type.GetType("System.String"));
u.Columns.Add("Amount", Type.GetType("System.String"));
try
for (int i = 0; i < dgvDesc.Rows.Count - 1; i++)
s = u.NewRow(); double.TryParse(dgvDesc.Rows[i].Cells[Discount2.Name].Value.ToString(), out discount);
s["Qty"] = double.Parse(dgvDesc.Rows[i].Cells[Qty.Name].Value.ToString());
s["UOM"] = dgvDesc.Rows[i].Cells[Uom2.Name].Value.ToString();
s["Description"] = invcode + dgvDesc.Rows[i].Cells[Description.Name].Value.ToString();
s["UnitPrice"] = dgvDesc.Rows[i].Cells[UnitPrice.Name].Value.ToString();
if (discount != 0)
s["Discount"] = "(" + string.Format("{0:0.##}", discount) + "%)";
else
s["Discount"] = "";
s["Amount"] = dgvDesc.Rows[i].Cells[Amount2.Name].Value.ToString();
u.Rows.Add(s);
catch (Exception) { }
csCashCal = new csCashInvoiceCal();
csCashCal.SetDataSource(dsCs.Tables[1]);
//csCashCal.Refresh();
loadParameter2();
private void loadParameter2()
ParameterFieldDefinitions paramFieldDefinitions;
paramValue = new ParameterValues();
discreteValue = new ParameterDiscreteValue();
paramFieldDefinitions = csCashCal.DataDefinition.ParameterFields;
discreteValue.Value = date;
fieldDefinition = paramFieldDefinitions["Date"];
commonParam();
discreteValue.Value = txtcsno.Text;
fieldDefinition = paramFieldDefinitions["InvoiceNo"];
commonParam();
discreteValue.Value = txtNameTo.Text;
fieldDefinition = paramFieldDefinitions["CustomerName"];
commonParam();
discreteValue.Value = txtAdd.Text;
fieldDefinition = paramFieldDefinitions["CustomerAddress"];
commonParam();
------other parameters----
private void commonParam()
paramValue.Clear();
paramValue.Add(discreteValue);
fieldDefinition.ApplyCurrentValues(paramValue);
private void print2()
using (printDocument1 = new System.Drawing.Printing.PrintDocument())
using (this.printDialog1 = new PrintDialog())
//this.printDialog1.UseEXDialog = true;
this.printDialog1.Document = this.printDocument1;
DialogResult dr = this.printDialog1.ShowDialog();
if (dr == DialogResult.OK)
int nCopy = this.printDocument1.PrinterSettings.Copies;
int sPage = this.printDocument1.PrinterSettings.FromPage;
int ePage = this.printDocument1.PrinterSettings.ToPage;
string PrinterName = this.printDocument1.PrinterSettings.PrinterName;
try
csCashCal.PrintOptions.PrinterName = PrinterName;
csCashCal.PrintToPrinter(nCopy, false, sPage, ePage);
printcount++;
//saveCountPrint();
catch (Exception err)
MessageBox.Show(err.ToString());
This is only a simple sales receipt application that uses dgv and textboxes to push its data to dataset to the crystal report, a simple one but there are instances that it is very slow.
But I'm having trouble implementing this using SSRS, since I'm only new to this one, wherein I created the report using report wizard, with two button options inside the form for print preview or direct print selection. Actually, it is very easy to implement
with print preview because it uses reportviewer. My problem is that how can I print the report directly without using a reportviewer?
So here is my code so far which I don't know what's next:
private void button2_Click(object sender, EventArgs e)
this.Cursor = Cursors.WaitCursor;
loadReceipt3();
//print3();
this.Cursor = Cursors.Default;
ReportParameter[] parameter = new ReportParameter[11];
private void loadParameter3()
parameter[0] = new ReportParameter("InvoiceNo", txtcsno.Text);
parameter[1] = new ReportParameter("Date", date);
parameter[2] = new ReportParameter("CustomerTin", txtTin.Text);
parameter[3] = new ReportParameter("CustomerName", txtNameTo.Text);
parameter[4] = new ReportParameter("CustomerAddress", txtAdd.Text);
parameter[5] = new ReportParameter("Agent", agent);
parameter[6] = new ReportParameter("Discount", "Discount: ");
parameter[7] = new ReportParameter("TotalDiscount", lblDiscount.Text + "%");
parameter[8] = new ReportParameter("TotalSales", rdtotal);
parameter[9] = new ReportParameter("Tax", rdtax);
parameter[10] = new ReportParameter("TotalAmount", rdnet);
private void loadReceipt3()
DataSet dsrs = new DataSet();
DataTable dtrs = new DataTable();
DataRow drs;
dtrs.Columns.Add("Qty", Type.GetType("System.String"));
dtrs.Columns.Add("UOM", Type.GetType("System.String"));
dtrs.Columns.Add("Description", Type.GetType("System.String"));
dtrs.Columns.Add("UnitPrice", Type.GetType("System.String"));
dtrs.Columns.Add("Discount", Type.GetType("System.String"));
dtrs.Columns.Add("Amount", Type.GetType("System.String"));
try
for (int i = 0; i < dgvDesc.Rows.Count - 1; i++)
drs = dtrs.NewRow();
drs["Qty"] = double.Parse(dgvDesc.Rows[i].Cells[Qty.Name].Value.ToString());
drs["UOM"] = dgvDesc.Rows[i].Cells[Uom2.Name].Value.ToString();
drs["Description"] = invcode + dgvDesc.Rows[i].Cells[Description.Name].Value.ToString();
drs["UnitPrice"] = dgvDesc.Rows[i].Cells[UnitPrice.Name].Value.ToString();
if (discount != 0)
drs["Discount"] = "(" + string.Format("{0:0.##}", discount) + "%)";
else
drs["Discount"] = "";
drs["Amount"] = dgvDesc.Rows[i].Cells[Amount2.Name].Value.ToString();
dtrs.Rows.Add(s);
catch (Exception) { }
int addtlRow = 7;
if (addtlRow > (count - 1))
addtlRow = addtlRow - (count - 1);
for (int i = 0; i < addtlRow; i++)
dtrs.Rows.Add();
loadParameter3();
LocalReport localreport = new LocalReport();
localreport.SetParameters(parameter);
localreport.DataSources.Clear();
localreport.DataSources.Add(new ReportDataSource("dsSalesReceiptSsrs", dtrs));
localreport.Refresh();
//what's next....
So what's next after local..refresh()? Actually, I have googled a lot but I didn't found the exact solution that I'm looking for which confuses me a lot.
Anyway I'm using VS 2010 with sql server 2012 express.
You're help will be greatly appreciated.
Thank you,
HardzAfter some further studies with ReportViewer controls and with the use of this tutorial @ : http://msdn.microsoft.com/en-us/library/ms252091.aspx, which helps me a lot on how to print a report without using a report viewer, I found out what is missing
with my code above and helps solve my question.
Here's the continuation of the code above:
private void loadReceipt3()
loadParameter3();
LocalReport localreport = new LocalReport();
localreport.ReportPath = @"..\..\SsrsCashReceipt.rdlc";
localreport.SetParameters(parameter);
localreport.DataSources.Clear();
localreport.DataSources.Add(new ReportDataSource("dsSalesReceiptSsrs", dtrs));
Export(localreport);
print4();
private IList<Stream> m_streams;
private int m_currentPageIndex;
private void Export(LocalReport report)
string deviceInfo =
@"<DeviceInfo>
<OutputFormat>EMF</OutputFormat>
<PageWidth>8.5in</PageWidth>
<PageHeight>11in</PageHeight>
<MarginTop>0.25in</MarginTop>
<MarginLeft>0.25in</MarginLeft>
<MarginRight>0.25in</MarginRight>
<MarginBottom>0.25in</MarginBottom>
</DeviceInfo>";
Warning[] warnings;
m_streams = new List<Stream>();
report.Render("Image", deviceInfo, CreateStream,
out warnings);
foreach (Stream stream in m_streams)
stream.Position = 0;
private void print4()
if (m_streams == null || m_streams.Count == 0)
throw new Exception("Error: no stream to print.");
PrintDocument printDoc = new PrintDocument();
PrintDialog printDlg = new PrintDialog();
printDlg.Document = printDoc;
DialogResult dr = printDlg.ShowDialog();
if (dr == DialogResult.OK)
if (!printDoc.PrinterSettings.IsValid)
throw new Exception("Error: cannot find the default printer.");
else
printDoc.PrintPage += new PrintPageEventHandler(PrintPage);
m_currentPageIndex = 0;
printDoc.Print();
Dispose();
public void Dispose()
if (m_streams != null)
foreach (Stream stream in m_streams)
stream.Close();
m_streams = null;
private Stream CreateStream(string name, string fileNameExtension, Encoding encoding, string mimeType, bool willSeek)
Stream stream = new FileStream(name + "." + fileNameExtension,
FileMode.Create);
m_streams.Add(stream);
return stream;
private void PrintPage(object sender, PrintPageEventArgs ev)
Metafile pageImage = new
Metafile(m_streams[m_currentPageIndex]);
// Adjust rectangular area with printer margins.
Rectangle adjustedRect = new Rectangle(
ev.PageBounds.Left - (int)ev.PageSettings.HardMarginX,
ev.PageBounds.Top - (int)ev.PageSettings.HardMarginY,
ev.PageBounds.Width,
ev.PageBounds.Height);
// Draw a white background for the report
ev.Graphics.FillRectangle(Brushes.White, adjustedRect);
// Draw the report content
ev.Graphics.DrawImage(pageImage, adjustedRect);
// Prepare for the next page. Make sure we haven't hit the end.
m_currentPageIndex++;
ev.HasMorePages = (m_currentPageIndex < m_streams.Count);
Thank you very much for this wonderful tutorial. :) -
Can Reader pick up the Default Page Size of a printer that is not the Windows Default Printer?
We have a web based application that generates PDF documents via Crystal Reports.
We are using Adobe Reader 8
The PDF pages are displayed within an Internet Explorer window where the the users then print the document.
The application is designed so the user only gets one chance to print the document (ie they cant come back and change printer settings if they happen to print the document out incorrectly)
The document needs to be printed on A3 paper, full duplex.
We have a printer set-up decidated to the printing of the documents generated by this application. The default page size of this printer is set of A3.
If we set this dedicated printer as the Windows Default Printer we have no problems at all. The default page size (A3) is picked up and the document is printed correctly.
If any other printer is set as the Windows Default Printer (eg one that has a default page size of A4), the users must obviously select the correct printer from the Print Dialogue Box -however when the user selects the dedicated A3 printer, the page size remains as A4 (page size of the Windows Default Printer). This means the user must remember to change the paper size to A3 each time.
Out users find IT a struggle at the best of times - anything that makes the process simpler is very welcomed!
Is there a way to ensure the default page size of the printer is respected when that printer is not the Windows Default Printer?
Thanks!No.
Maybe you are looking for
-
I would like to have Snow Leopard, Mavericks with built-in recovery, and Windows 7 (Bootcamp) on my iMac (Intel). Is this possible? If so, how? Currently, I have Snow Leopard and Windows 7 (Bootcamp) running on my iMac. I have enough disk space t
-
Non-static method destroyApp(boolean) cannot be referenced from a static co
Hi guys, ive been writing, erasing and rewriting code, and finally my midlet runs well. It get complicated when i began to use the class Canvas, because the main process required values from the Canvas class. Im not sure if the program is well design
-
its 12:25 pm 19th september 2012 pdt but ios 6 update is still not out can anyone tell me when will it be available
-
Forms [32 Bit] Version 10.1.2.0.2 Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 Application Server on UNIX Error: FRM-40815 Variable GLOBAL.%s does not exist. Raised during: Attempt to bring up LOV and validate from list = 'yes'. Each fie
-
Why is Mac Help so teeth-grindingly slow in Lion? Perhaps because Lion is a download-only OS, Apple seems to have put the entire Help System online, but Surely there is a way to download the help system to my Mac? It often takes half a minute just to