Use of XI in MM and SD
how can we use XI to post Invoice(MM) and orders(SD) in SAP?
Edited by: Isabelle Britten on Oct 2, 2008 1:23 PM
Hi,
Create DT according to flat file structure
Identify INVOICE and ORDERS IDOCs that are going to be used in your scenario. instead you can also use Standard BAPIs too.
Then go ahead and create a scenario.
The following URL describes how to create a scenario.
Configure a scenario
Steps required to configure a scenario?
Venkat
Similar Messages
-
Use one account for apps and other for itunes match
Hello everybody
My question today is quite simple. I use one account for apps and tv shows, but inwant to use a different itunes account for purchasing itunes match. How can I use them both on my devices? Will it be asking for my user-pass each time i play a song? What other thing should i consider?
Thank you in advanceI would strongly recommend you not do this. You will regret it.
I have played with this issue a lot. You have to remain signed into match in order for it to show up on your phone. If you sign out to purchase an app or redownload one from your appstore id you use then match will be removed from your phone and when you go into your music app the icloud will not be there. You then have to go sign back out of the store id you used for your app purchase and then sign back into match and everything will have to go though the download to your device process again. This really is not what you want to do.
Sign up to match with the apple id that you know you will use the most or has the most purchased items and use that for all purchases, i.e. books, apps, movies, and music. You don't want to go though the other process.
Plus apple will start not letting you sign into match because you signed out and back in, in to short a period of time.
all store purchases on an iphone are linked to the store id. if you sign out of your match id on the appstore and sign into another account to purchase an app then itunes match will sign out in the music app. You can't have two store id's signed into your iphone at the same time. They are all linked together. -
I've uploaded Acrobat XI Pro and it freezes when I'm using it. I uninstalled and re-installed. When I login, it says that it is unable to validate the account and has an option to use the trial. How do I fix this?
This is an open forum, not Adobe support... you need Adobe staff support to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us" -
Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected] -
I found My iPhone contacts on my friends Iphone we both have 4s! But we use the same apple ID and ICloud ID! How can undo what happened? all my private stuff is now on his phone!!! help me plz!!?
Of course if you are both connected to the same iCloud account you have the same contacts - what did you expect?. The contacts live on the server and are read from there by the devices; so as you've both managed to sync your contacts up to iCloud they are now inextricably mixed. You can only delete your contacts by deleting individual ones, and doing that will delete them from your phone as well.
You can only unravel this by
1. In the iCloud contacts page at http://icloud.com, select all the contacts, click on the cogwheel icon at bottom left and choose 'Export vCard'.
2. Sign out of System Preferences>iCloud
3. Create a new Apple ID and open a new iCloud account with it for your own use.
4. Import the vCard back into the iCloud contacts page.
5. Go to http://icloud.com and sign in with the original ID. This is now his ID. Work through the contacts individually deleting the ones you don't want him to have. When done sign out and advise him to change his password.
6. Go to the new iCloud account and delete his contacts individually.
Of course if you have also been syncing calendars and using the same email address there are problems with doing this. -
how do I set up my Imac to allow using both my computer speakers and a Bose SoundLink system as outputs at the same time. I can use one or the other, but not both. From systems Preferences I must select one or the other. I want both to work all the time.
Hi,
I would recommend you to use 0FI_AP_4 rather using both, particularly for many reasons -
1. DS: 0FI_AP_4 replaces DataSource 0FI_AP_3 and still uses the same extraction structure. For more details refer to the OSS note 410797.
2. You can run the 0FI_AP_4 independent of any other FI datasources like 0FI_AR_4 and 0FI_GL_4 or even 0FI_GL_14. For more details refer to the OSS note: 551044.
3. Map the 0FI_AP_4 to DSO: 0FIAP_O03 (or create a Z one as per your requirement).
4. Load the same to a InfoCube (0FIAP_C03).
Hope this helps.
Thanks.
Nazeer -
I have been given permission for unlocking my iphone 3 GS from Orange. I want to set up the phone for my wife to use with a new number and carrier. Do I unlock under my itunes account first ( I now have a new iphone on this account) or set one up for her and then unlock the phone. I am worried about upsetting the new phone.
I would complete unlocking as is and then
restore as new once you know the iPhone is unlocked
Be aware Orange will process the request at their speed
one of the reasons they usually reside at bottom of User Sat surveys
will likely take weeks
This may also help
http://support.apple.com/kb/HT5014 -
I need to purchase a divice to expand my Wi-fi network. I was looking at the AirPort Extreme, but a friend has a brand new Time Capsule for sale. So, for the same price of the AirPort Extreme, I´m getting the Time Capsule.
I already own one and using it as Time Machine and wireless router. If I decide to purchase another TC would it have any conflict with the one that I already have?
Is it possible to use one as Time Machine and wireless router and the other to just expand network and storage only (not as Time Machine)?If I decide to purchase another TC would it have any conflict with the one that I already have?
No
Is it possible to use one as Time Machine and wireless router and the other to just expand network and storage only (not as Time Machine)?
Yes. The important thing to remember is that the "extending" Time Capsule must be located where it can receive a strong wireless signal from your "main" Time Capsule. -
I have one Apple ID for my MAC and iTunes account and another that is used for both my iTunes and iPad. When I purchased music from iTunes using the Mac ID, the music isn't available on my iTunes or iPad. Neither lets me change my ID so how do I fix this issue so I can play the music on all three?
Hello chlanli
You would need to use one Apple ID for purchases in order to get them across all of your devices and computer. If you want you can use one Apple ID for purchases and the other one to sync personal data. The article below will explain further.
Using your Apple ID for Apple services
http://support.apple.com/kb/ht4895
Regards,
-Norm G. -
I am afraid that my computer won't be able to hold all of my files for work and personal use. Will it? And if I get a new notebook strictly for work, how can I finance it without paying all upfront?
It would help to know which one of the 9 different models of MacBook you have. To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info (and then System Report if you’re running 10.7 Lion or 10.8 Mountain Lion). When System Profiler comes up check the Model Identifier and post it back here.
Rather than buying a MacBook Pro to replace your MacBook you can just get a bigger hard drive. You can get a 1tb drive for around $100 and they are easy to replace in a MacBook. -
Iv downloaded the 0845 wizard from the App Store. Registered my details and it has been working. But for some reason it won't let me log in and keep saying failed every time I try to use it. Iv deleted and re-downloaded the app and it still says the same?
I would say to start by looking on their web site... unfortunately, that appears to be dead.
Based on the horrible ratings on the App Store (1 star for the current version), I'm not surprised it doesn't work well. -
I have just purchased a lightning to 30 pin adaptor to use on an iPad mini and a gen5 iPod touch both devices are running iOS 8.1.3 and come up with The error message "this accessory is not supported by this device "
THis is means they are not charging on a 30 pin cable and the touch won't work in my Apple iPod dock - no audio out or charge. Have re powered both devices to no avail am wondering if the iOS version is the problem
Help!If it is a lightning to 30 pin adaptor, and you have a 7th Generation Nano it has to fit the Nano.
This is lightning to 30 pin adapter: http://www.bestbuy.com/site/Apple%26%23174%3B---Lightning-to-30-Pin-Adapter/6651 936.p?id=1218803450821&skuId=6651936#tab=overview
Is this what you bought?
You need to contact Sony and see if they model you have is compatible with the docking adapter. It may not be. -
Single Sign on using SAML between JWS application and Web Application
Hi,
We have two applications one is swing based Java Web Start application and other is a normal web application. We are trying to enable single sign on between both the applications. Can SAML be used to enable single sign on? If yes, can some one let us know how to do this?
Thanks,
RamaThanks. But it is based on two WEB applications deployed on two different weblogic domains. What I am looking for is one application which is launched using Java Web Start(JNLP) and other a web application. The Java Web Start application uses its proprietary authentication implementation and the web application used DefaultAuthenticator of weblogic. Hope this detail will help you to answer my question better. I should have given this information earlier.
Thanks.
Rama -
I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.
In particular, I am analyzing the example "Even Angle Reference Signal Processing (Digital Tacho, DAQmx).vi", whose documentation I am reproducing in the following:
<B>DESCRIPTIONS</B>:
This VI demonstrates how to extract even angle reference signals and remove the slow-roll errors. It uses DAQmx VIs to acquire sound or vibration signals and a digital tachometer signal. This VI includes a two-step process: acquire data at low rotational speed to extract even angle reference; use the even angle reference to remove the errors in the vibration signal acquired at normal operation.
<B>INSTRUCTIONS</B>:
1. Run the VI.
2. On the <B>DAQ Configurations</B> tab, specify the <B>sample rate</B>, <B>samples per channel</B>, device and channel configurations, and tachometer channel information.
<B>NOTE</B>: You need to use DSA PXI-447x/PXI-446x and PXI TIO device in a PXI chassis to run this example. The DSA device must be in slot 2 of the PXI chassis.
3. Switch to <B>Extract Even Angle Reference</B> tab. Specify the <B>number of samples to acquire</B> and the <B># of revs in reference</B> which determines the number of samples in even angle reference. Click <B>Start</B> to take a one-shot data acquisition of the vibration and tachometer signals. After the acquisition, you can see the extracted even angle references in <B>Even Angle Reference</B>.
4. Switch to the <B>Remove Slow-roll Errors</B> tab. Click <B>Start</B> to acquire data continuously and view the compensate results. Click <B>Stop</B> in this tab to stop the acquisition.
<B>ORDER ANALYSIS VIs USED IN THIS EXAMPLE</B>:
1. SVL Scale Voltage to EU.vi
2. OAT Digital Tacho Process.vi
3. OAT Get Even Angle Reference.vi
4. OAT Convert to Even Angle Signal.vi
5. OAT Compensate Even Angle Signal.vi
My question is: How is the synchronization produced at the time of the compensation ? How is it possible to eliminate the errors in a synchronized fashion with respect to the surface of the shaft bearing in mind that I am acquired data at a low rotation speed in order to get the "even angle reference" and then I use it to remove the errors in the vibration signal acquired at normal operation. In this application both operations are made in different acquisitions, therefore the reference of the correction signal is lost. Is it simply compensated without synchronizing ?
Our application is based on FPGA and we need to clarity those aspects before implementing the procedure.
Solved!
Go to Solution.Hi CracKatoA.
Take a look at the link bellow:
http://forums.ni.com/ni/board/message?board.id=170&message.id=255126&requireLogin=False
Regards,
Filipe Silva -
Help! I received a message on my iPhone that "phone Number Added to iPad4 [NAME of IPAD] is now using [PHONE NUMBER] for FaceTime and iMessage" and it is not my iPad!! What do I do, how do I shut them out??
Use a strong password and set up Two Step Verification on your account.
http://support.apple.com/kb/ht5570 -
Difference between using app server connection pooling and using the driver
Hi all,
How to get connection pooling with out application server and tomcat also?
What is the difference between using app server connection pooling and using the driver supported connection pooling?
Regards,
Muralimaybe the performance of App server pool is better than the JDBC pool,
for you don't know wether the implementation of the JDBC interface is good or bad.
Maybe you are looking for
-
How do i find music on iphone that is not from the cloud
The list of songs on my iphone is endless, but most of that music is still in the cloud. Is there a way to get the phone to display only the music that is actually physically downloaded onto my phone already? TIA
-
HI, Since a while I have received from apple the warning for an up grade for my Os x Mountain Lion and finally I decider to do it. . . . and since it was just an up grade I DIDN'T DO A BACK UP of all the content of my book pro because I thought it wa
-
Fonts in mail have gone screwy
after installing a bunch of fonts, I opened mail and when I type out a message it comes out in a totally different unreadable font. I fixed it in preferences, but I can't find a way to fix it in the top area (to:, from:, date:, etc...) any ideas??? t
-
Hello friends, Where is user language stored in BW. I am looking for table that stores the language entered thru SU01. Thanks Rahul
-
Hi, Pc worked properly, and when closing the lid I've heard clicking noise. Next day I got a black screen, I can hear a noise from inside that components work ( not quite sure which one), and there is no any indicator light except for the one on star