Use Palm Pre Profile or Create New HP Profile for Touchpad?

I have a Pre+ and using my original Palm Profile for backups, etc. When my Touchpad arrives, should I use my original Pre Profile or create a separate HP Profile?
What are the advantages and disadvantages of using the same profile for both devices?
Post relates to: HP TouchPad (WiFi)

ivanetter wrote:
I have the Palm Pre2 and the HP Touchpad. I set up the touchpad first, created the webOS account using yahoo mail address. When I received my Palm Pre2, I created the palm profile using the same email address.
The first connect of the two, a few apps that I installed on my touchpad synced onto my palm. Now, I cannot get this to happen again.
Also, on my Palm Pre 2, the phone came with a palm profile already on it...Dr. Skipped Firstuse...how do I delete this and where did it come from?
Unless I am mistaken, the sync of apps between the devices only happens one time: when the device is first brought online and into the webOS Account.
Not sure what you mean by Dr. Skipped Firstuse. Could you give us a screenshot? To take a screenie press at the same time: Orange (may be White on your phone), Sym and P keys.

Similar Messages

E72 unable to create new sip profile

I am trying to create new sip profile from options>settings>connection>sip settings
nohing happens when I select new sip profile using default profile
I hav already reset the phone using *#7780# but problem is still there
please help ?
Solved!
Go to Solution.

*#7780# does not reset the phone. It just restores factory default settings.
In order to reset the phone you need to use *#7370# instead. Back up everything except your settings beforehand because this does erase the phone's C: drive entirely.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Everytime when i connect 3g internet with my laptop using USB (Windows 7) it creats new connection trailing network1, network2, network3.........

Everytime when i connect 3g internet with my laptop using USB (Windows 7) it creats new connection trailing network1, network2, network3.........
It does not recognise my old connection.
Same case with wifi connection as well.
Also after updating new IOS-5, whenever i make USB connection it does not display my name under my computer.
But before it use to display my name now it is coming as Apple I-phone.
Anyone who can help on this, how to get it resolved.
- I have update my phone with backup (OLD version of IOS) but issue still presists.
This is the same issue somone mention on below.
http://www.sevenforums.com/network-sharing/193123-iphone-network-location-doesnt -save-when-disconnected.html
Kind Regards
@ru..

If the message that is displaying is "Network connection timed out", disable any Anti-Virus or Firewall software on the comptuer or check with the company that supports the product on how to modify it to allow iTunes to connect to the Internet.

Creating new logical ports for WSDL with several port types not working

Hi all,
I am trying to integrate some BODS webservice into the BPM. I am using CE 7.2 Kernel Version: 7.20.3710. When I am trying to assign a provider system in the application configuration I get following error:
The provider system successfully found the needed service, but its wsdl is without webservice policy. Thus the generated client configuration might not work because of different configurations between service and client (most probable a difference in the security settings). Either assign a provider system with access to wsdl with policy or manually create the client configuration.
The regarding provider system is using a communication profil where the authentication method is set to "none". Normally this configuration should work, but it isn't.
So I started to create new logical ports for each port type. But then I get the error:
Port type name of loaded WSDL does not match the port type name of the Service Reference.
I checked already the port type names in the WSDL but they are 100% the same. What I found was that the configuration is always trying to use the first port type in the WSDL. So I am not able to configure the other port types in the service group.
I also tried to do the same thing using a WSDL with just one port type and surprise it is working...
I hope somebody can help me out
Thanks in advance
Andy

Hi Andy,
Please check this Link: https://cw.sdn.sap.com/cw/docs/DOC-45012
Regards,
Naresh B

How to create new Partner Numbers for WE20?

Hello colleagues!
While creating new Source System for R/3 system in automatic mode providing existing RFC (SM59), system errored with message E0552 "Error during insert in port table".
I tried creating new Partner Profile "FI5FIN100D" in WE20 (partner type=LS of course) by copying existing "FI2FIN200D" partner profile (LOGICAL SYSTEM also), but I received error:
==================
Enter a permissible partner number
Message no. E0342
Diagnosis
The partner number 'FI5FIN100D' does not exist for the partner type 'LS'.
Procedure
Enter a valid partner number and make sure that this partner number exists for the partner type
===================
Where do I create this in BW? I tried WEDI but I received error:
=========
Transaction WEDI is an area menu and cannot be executed
Message no. OZ037
=========
I have SAP BW 3.0b, SP 26, Basis/Abap SP 48.
Can somebody help please?
Thank you in advance.
Mario Vallejo.

Hi Mario,
       In Partner Feild u have give the Logical System Name i.e particular to the client which is already create in SALE Transaction.It is taken by Basis People i think.I think it is already created .give that Logical sytem name in Partner Number.
For ex Partner Number: LGS100(This is created in SALE
                              Tr and assign it to
                              client i.e like 100 or 200)
       Partner Type : LS
     In PostProcessing Tab
         Type : 'US' or 'o'(depending on client)
        Agent : Randomly it (Generates)creates Number
        Lang : EN
Hope This Help
Sreeni

Create new CBO statistics for the tables

Dear All,
I am facing bad performance in server.In SM50 I see that the read and delete process at table D010LINC takes
a longer time.how to create new CBO statistics for the tables D010TAB and D010INC. Please suggest.
Regards,
Kumar

Hi,
I am facing problem in when save/activating any problem ,so sap has told me to create new CBO statistics for the tables D010TAB and D010INC
Now as you have suggest when tx db20
Table D010LINC
there error comes Table D010LINC does not exist in the ABAP Dictionary
Table D010TAB
     Statistics are current (|Changes| < 50 %)
New Method           C
New Sample Size
Old Method           C                       Date                 10.03.2010
Old Sample Size                              Time                 07:39:37
Old Number                51,104,357         Deviation Old -> New       0 %
New Number                51,168,679         Deviation New -> Old       0 %
Inserted Rows                160,770         Percentage Too Old         0 %
Changed Rows                       0         Percentage Too Old         0 %
Deleted Rows                  96,448         Percentage Too New         0 %
Use                  O
Active Flag          P
Analysis Method      C
Sample Size
Please suggest
Regards,
Kumar

Urgent - Create new chat rooms for discussion

HI
Can anyone tell me how the user able to
a. Create new chat rooms for discussion
b. Assign groups who can usr collaboration
Thanks
shashank
Urs answer must be appreciat.

Hi Shahshank,
If you want to add user groups while creating a room also.. it is the same procedure.. instead of username enter the group name and add it as memebers.. this is from the room creation wizard itself.
Else if you want to add usergroups to an already existing room then you will have to make use of the Member Maintenance or room maintenance iview from where you can add or delete or change users permissions for an existing room.for this refer to
http://help.sap.com/saphelp_nw04/helpdata/en/2a/dfa0404dd52b54e10000000a1550b0/frameset.htm
Hope this helps,
Regards
Uma.
Also, the SDN way of Thanking is by assigning points to helpful answers !!!

I can't remember my security question answers , so Please help me to Create new Security Question for my Account .

rt ,
This is ***majed*** ,I can't remember my security question answers , so Please help me to Create new Security Question for my Account .
Best wishes,

If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then the steps half-way down this page give you a reset link on your account : http://support.apple.com/kb/HT5312
If you don't have a rescue email address (you won't be able to add one until you can answer your questions) then you will need to contact iTunes Support / Apple in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 link above to add a rescue email address for potential future use

I can't remember my security question answers , so please help me to Create new Security Question for my Account : ******** , Best wishes

I can't remember my security question answers , so please help me to Create new Security Question for my Account : **********
, Best wishes
<Personal Information Edited by Host>

We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple - I've asked the hosts to remove your email address from your post (it's not a good idea to post personal info on any public forum).
If you have a rescue email address (which is not the same thing as an alternate email address) on your account then the steps half-way down this page will give you a reset link on your account : http://support.apple.com/kb/HT5312
If you don't have a rescue email address (you won't be able to add one until you can answer your questions) then you will need to contact Support in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 link above to add a rescue email address for potential future use

Want to create new protection group for 2 members which are already under another protection group.

Want to create new protection group for 2 members which are already under another protection group. I have 12 servers under xyz protection group, want to move 2 members server to new protection group. How it is possible without loosing current backups.

Hi,
It all depends if the data source was originally co-located on the same replica shared with other data sources. If not then DPM will simple re-use the same replica and pick up where it left off. If it was co-located, then the old replica and RP
volume is shared and the RP's will expire as new ones are made on the new replica and RP volume created when it's re-protected.
Moving Between Co-Located and Non-Co-Located Protection Groupshttp://technet.microsoft.com/en-us/library/ff399045.aspx
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Can we create new partner types for quallity notifications in SAP system?

Can we create new partner types for quallity notifications in SAP system?
The business requirement is to limit the available entries for partners displayed when they search in quality notification. I have already created new partner functions & assigned the relevant partner types, however struggling with defining new partner types.
Would appreciate help in resolving this.
Thanks,
Nilesh

I know this customisation setting ...It allows us to create the partner functions & assign it to the partner determination procedure.
Then you can assign the procedure to the notification type.
This customisation setting does not solve the problem I have.
I'm looking for the partner type creation process which we assign to the partner function.
Edited by: NILESH BHAVE on Aug 12, 2010 3:06 PM

How to create new text symbols for the standard program.

Based on the customer's requirement, I need to create a new implicit enhancement for the selection screen.
I want to create new text symbols for the parameters and blocks, but I cannot change the standard ones.
Does anybody know something about that? Thank you.

hi ming yu,
example : %_MATNR_%_APP_%-TEXT -> this is the material description name in mb5b
change the description in ur enhancement implementation
%_MATNR_%_APP_%-TEXT = 'Material'
it is works only input/output field
Thanks&Regards,
naveen

How to create new starting conditions for a workflow of shopping cart

Hi all,
How to create new starting conditions for a workflow of shopping cart
SATYA

Excecute SWB_COND
Creating New:
Click on Create button. If you cannot see that it could be a authorization issue
then Business Object: BUS2121
Double Click the event linkage for one step workflow
Define the expressions, Check Consistency and click on Traansfer
Start Condition is created. If it is not Active click on the Red Button to make it Active
Editing Already existing:
Click on Edit Button If you cannot see that it could be a authorization issue
then select Business Object: BUS2121
Click on the condition part (White area) of the start condtion needing editing
Change the expressions, Check Consistency) and click on Traansfer.If it is not Active click on the Red Button to make it Active

How can we create new pricing requirement for a condition type

Hi All,
I am in urgent need of creating new pricing requirements for a condition type.
Or if there is already a conditin type existing and we want to make changes in the pricing requirements of that condition type, How can we do so ?
In short if you can let me know how does pricing get impacted by the condition types.
Thanks
Mark

Hi!
The common transactions for condition mantaining are VK11, VK12, VK13.
In SPRO - Sales and distributoin - Basic function - Pricing - Pricing control - *.
Is this what you want?
Regards
Tamá

Create new business transaction for OBV3.

Dear All
In OBV3 how to create Business transactions as i want to create new
business transactions for the same.
Regards
VG

Dear All
Business transactions are system defined .
Thanks
VG

Use Palm Pre Profile or Create New HP Profile for Touchpad?

Similar Messages

Maybe you are looking for