Use parameter to set runtime xlsx report document

Thanks in advance,
I'm using BIRT Runtime 4.4.2 with a report design that prompts the user for a value. I want to take the parameter value and pass it to the BIRT Runtime report document name.
For example, if in response to the parameter prompt, the value of the parameter is now "Johnson," then I want that to become the name or the xlsx document that is automatically named/rendered to the default directory - the user doesn't have to do anything after entering the parameter value and hitting enter.
I'm aware of the various script options, but not sure where to place them in the report or what specifically to use in the report string to designate the report document name.
Should I use the afterfactory event to grab the value of the parameter? If so, how do i pass that to something that the report string (url?) on the jsp page will understand?
New to all of this, so as much detail (where you can point me to go, what to read) without having to use Java would be much appreciated.
thanks again,

OK,
So it sounds like a non-programmer like me has some learning to do.
First:
When you say I need to create custom parameters page, you mean that the report parameter option within the report design will capture the information I need, but then I cannot pass that information to the portion of the configuration that specifies the name and file location, so I have to design a custom javascript page that asks for the same information (what is now the report parameter), and also ask for the desired folder location (or just assign a folder location (the location becomes less important if I can rename the report output.)
Second: I need to use the runtime to not use the BIRT web viewer, to generate the excel output? I'm not sure what this means, but if you point me to the documentation on this, I will figure it out... Once the runtime generates the file, I need to...
Third: I need to create a display another HTML page containing: the name of the (Excel) output file (using the inputted parameter in step 1), into the default folder location I have also added.
Am I understanding what is needed? If so, could you point me to the corresponding documentation?
Thanks for all of your help.

Similar Messages

Use parameter to create folders in report distribution

Hi,
This is my distribution xml
<destinations>

<foreach>
<file id="a1" name="C:\junior\report\*DEPT_&F3*\dept_rep&<F3>.pdf" format="pdf" instance="this">
<include src="mainSection"/>
</file>
</foreach>
</destinations>
I am using the parameter F3 to create a subfolder because the requirement is that i distribute pdf reports to break on F3 and place them in different folders.
Just using name="C:\junior\report\dept_rep&<F3>.pdf" works but I am not able to do it if i have at folder level. But that is my requirement.
Is this possible.

Hi,
Can anyone help me in this.

Using Parameter Date Range Values in Report

Post Author: rsteeg
CA Forum: General
i would like to include the selected start and end dates on my report to display the range of the report. I cannot recall how to do it. Can any one help? I am using CR X.

Post Author: Crystal Fire
CA Forum: General
"All Dates Between "+ ToText(Minimum({?Your Date Field}),"M/d/yyyy")" and "ToText(Maximum({?Your Date Field}),"M/d/yyyy")

How to use parameter id in report

dear all
please solve this problem
i use parameter id in alv report and i call another report i m unable to pass parameter to another report
regards
abhilash

Hi,
Here is the example
TABLES: ekko.
type-pools: slis. "ALV Declarations
*Data Declaration
TYPES: BEGIN OF t_ekko,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
statu TYPE ekpo-statu,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
menge TYPE ekpo-menge,
meins TYPE ekpo-meins,
netpr TYPE ekpo-netpr,
peinh TYPE ekpo-peinh,
END OF t_ekko.
DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
 wa_ekko TYPE t_ekko.
*ALV data declarations
data: fieldcatalog type slis_t_fieldcat_alv with header line,
 gd_tab_group type slis_t_sp_group_alv,
 gd_layout type slis_layout_alv,
 gd_repid like sy-repid,
 gt_events type slis_t_event,
 gd_prntparams type slis_print_alv.
*Start-of-selection.
START-OF-SELECTION.
perform data_retrieval.
perform build_fieldcatalog.
perform build_layout.
perform build_events.
perform build_print_params.
perform display_alv_report.
*& Form BUILD_FIELDCATALOG
 Build Fieldcatalog for ALV Report
form build_fieldcatalog.
There are a number of ways to create a fieldcat.
For the purpose of this example i will build the fieldcatalog manualy
by populating the internal table fields individually and then
appending the rows. This method can be the most time consuming but can
also allow you more control of the final product.
Beware though, you need to ensure that all fields required are
populated. When using some of functionality available via ALV, such as
total. You may need to provide more information than if you were
simply displaying the result
 I.e. Field type may be required in-order for
 the 'TOTAL' function to work.
fieldcatalog-fieldname = 'EBELN'.
fieldcatalog-seltext_m = 'Purchase Order'.
fieldcatalog-col_pos = 0.
fieldcatalog-outputlen = 10.
fieldcatalog-emphasize = 'X'.
fieldcatalog-key = 'X'.
fieldcatalog-do_sum = 'X'.
fieldcatalog-no_zero = 'X'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'EBELP'.
fieldcatalog-seltext_m = 'PO Item'.
fieldcatalog-col_pos = 1.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'STATU'.
fieldcatalog-seltext_m = 'Status'.
fieldcatalog-col_pos = 2.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'AEDAT'.
fieldcatalog-seltext_m = 'Item change date'.
fieldcatalog-col_pos = 3.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MATNR'.
fieldcatalog-seltext_m = 'Material Number'.
fieldcatalog-col_pos = 4.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MENGE'.
fieldcatalog-seltext_m = 'PO quantity'.
fieldcatalog-col_pos = 5.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MEINS'.
fieldcatalog-seltext_m = 'Order Unit'.
fieldcatalog-col_pos = 6.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'NETPR'.
fieldcatalog-seltext_m = 'Net Price'.
fieldcatalog-col_pos = 7.
fieldcatalog-outputlen = 15.
fieldcatalog-datatype = 'CURR'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'PEINH'.
fieldcatalog-seltext_m = 'Price Unit'.
fieldcatalog-col_pos = 8.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
endform. " BUILD_FIELDCATALOG
*& Form BUILD_LAYOUT
 Build layout for ALV grid report
form build_layout.
gd_layout-no_input = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text = 'Totals'(201).
gd_layout-totals_only = 'X'.
gd_layout-f2code = 'DISP'. "Sets fcode for when double
 "click(press f2)
gd_layout-zebra = 'X'.
gd_layout-group_change_edit = 'X'.
gd_layout-header_text = 'helllllo'.
endform. " BUILD_LAYOUT
*& Form DISPLAY_ALV_REPORT
 Display report using ALV grid
form display_alv_report.
gd_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
 exporting
 i_callback_program = gd_repid
 i_callback_top_of_page = 'TOP-OF-PAGE' "see FORM
 i_callback_user_command = 'USER_COMMAND'
 i_grid_title = outtext
 is_layout = gd_layout
 it_fieldcat = fieldcatalog[]
 it_special_groups = gd_tabgroup
 it_events = gt_events
 is_print = gd_prntparams
 i_save = 'X'
 is_variant = z_template
 tables
 t_outtab = it_ekko
 exceptions
 program_error = 1
 others = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " DISPLAY_ALV_REPORT
*& Form DATA_RETRIEVAL
 Retrieve data form EKPO table and populate itab it_ekko
form data_retrieval.
select ebeln ebelp statu aedat matnr menge meins netpr peinh
up to 10 rows
from ekpo
into table it_ekko.
endform. " DATA_RETRIEVAL
Form TOP-OF-PAGE *
ALV Report Header *
Form top-of-page.
*ALV Header declarations
data: t_header type slis_t_listheader,
 wa_header type slis_listheader,
 t_line like wa_header-info,
 ld_lines type i,
 ld_linesc(10) type c.
Title
wa_header-typ = 'H'.
wa_header-info = 'EKKO Table Report'.
append wa_header to t_header.
clear wa_header.
Date
wa_header-typ = 'S'.
wa_header-key = 'Date: '.
CONCATENATE sy-datum+6(2) '.'
 sy-datum+4(2) '.'
 sy-datum(4) INTO wa_header-info. "todays date
append wa_header to t_header.
clear: wa_header.
Total No. of Records Selected
describe table it_ekko lines ld_lines.
ld_linesc = ld_lines.
concatenate 'Total No. of Records Selected: ' ld_linesc
 into t_line separated by space.
wa_header-typ = 'A'.
wa_header-info = t_line.
append wa_header to t_header.
clear: wa_header, t_line.
call function 'REUSE_ALV_COMMENTARY_WRITE'
 exporting
 it_list_commentary = t_header.
 i_logo = 'Z_LOGO'.
endform.
 FORM USER_COMMAND *
 --> R_UCOMM *
 --> RS_SELFIELD *
FORM user_command USING r_ucomm LIKE sy-ucomm
 rs_selfield TYPE slis_selfield.
Check function code
CASE r_ucomm.
 WHEN '&IC1'.
Check field clicked on within ALVgrid report
 IF rs_selfield-fieldname = 'EBELN'.
 Read data table, using index of row user clicked on
 READ TABLE it_ekko INTO wa_ekko INDEX rs_selfield-tabindex.
 Set parameter ID for transaction screen field
 SET PARAMETER ID 'BES' FIELD wa_ekko-ebeln.
 Sxecute transaction ME23N, and skip initial data entry screen
 CALL TRANSACTION 'ME23N' AND SKIP FIRST SCREEN.
 ENDIF.
ENDCASE.
ENDFORM.
*& Form BUILD_EVENTS
 Build events table
form build_events.
data: ls_event type slis_alv_event.
call function 'REUSE_ALV_EVENTS_GET'
 exporting
 i_list_type = 0
 importing
 et_events = gt_events[].
read table gt_events with key name = slis_ev_end_of_page
 into ls_event.
if sy-subrc = 0.
 move 'END_OF_PAGE' to ls_event-form.
 append ls_event to gt_events.
endif.
 read table gt_events with key name = slis_ev_end_of_list
 into ls_event.
if sy-subrc = 0.
 move 'END_OF_LIST' to ls_event-form.
 append ls_event to gt_events.
endif.
endform. " BUILD_EVENTS
*& Form BUILD_PRINT_PARAMS
 Setup print parameters
form build_print_params.
gd_prntparams-reserve_lines = '3'. "Lines reserved for footer
gd_prntparams-no_coverpage = 'X'.
endform. " BUILD_PRINT_PARAMS
*& Form END_OF_PAGE
form END_OF_PAGE.
data: listwidth type i,
 ld_pagepos(10) type c,
 ld_page(10) type c.
write: sy-uline(50).
skip.
write:/40 'Page:', sy-pagno .
endform.
*& Form END_OF_LIST
form END_OF_LIST.
data: listwidth type i,
 ld_pagepos(10) type c,
 ld_page(10) type c.
skip.
write:/40 'Page:', sy-pagno .
endform.
Regards
Mudit

How to set runtime parameter for the entire system

Hi,
I have a problem with setting runtime parameters in jre v1.6.0_07. I have an XP computer with multiple users and to use the application eavery user must set the runtime parameter once by going to java control panel -> Java -> Java applet runtime settings -> view. How can i automate this? I have multiple users and there may be more users logging in so manually sending the C:\<userProfileDirectory>\Application Data\Sun\Java\Deployment\deployment.properties file to all profiles is not a solution. Same question here but no solution. Every user must get this parameter when they log in, they may be new users or existing users. The software I'm trying to use is browser based, we don't trigger an exe or something from local to run the software.
In C:\<userProfileDirectory>\Application Data\Sun\Java\Deployment\deployment.properties file there is a line like this;
deployment.javapi.jre.1.6.0_07.args=
This works for a single user. I've read the instructions in [deployment guide|http://java.sun.com/javase/6/docs/technotes/guides/deployment/deployment-guide/properties.html] but the properties file we put in C:\WINDOWS\Sun\Java\Deployment does not support ".args=" command. Anyone encountered or have a solution for this problem?
Thanks.

Hi,
got solution for this problem? I am also having the same problem.
Thanks.

Problem using default value of report parameter 1 to validate parameter 2 passed in to report

I am having a problem with an SSRS report using the default value of report parameter 1 to validate parameter 2 passed in to report (via C#) instead of using the value of parameter 1 that is also passed into the report. Here are the
simplified details:
Using SSDT, SQL Server 2008 R2
SSRS report has 2 parameters:
P1 -- text, hidden, default value 'R1', ... front-end C# code can pass 'R2' or 'R1'
P2 -- text, allows multiple values, list of available values provided by stored procedure (sproc_list) that takes P1 value as a parameter. Hence, sproc_list either provides a list for P1 = 'R1' or P1 = 'R2'.
List for P1 = 'R1' is 'A', 'B', 'C'
List for P1 = 'R2' is 'A', 'B', 'D'
Values for P1 and P2 can be passed in via C# to the report.
The C# front-end displays 2 report choices to the user, R1 and R2, where both choices call the same RDL; but choice R1 passes in 'R1' for P1, and the choice R2 passes in 'R2' for P1.
Upon a users 1st time use of the report no parameters are passed in. Then when the user exits the report, the parameter value for P2 that was chosen is saved off to a file for R1 or R2, and used the next time the user selects the report.
Everything always works fine for report R1 since the default value for P1 is 'R1'.
When R2 is chosen and the user selects 'D' as the value for P2, runs the report, then exits, the P2 value of 'D' for R2 is saved to a file. When the user returns the next day to run report R2, 'R2' is passed for P1, and 'D' is passed for P2.
This is when the problem occurs. The value of 'D' for P2 is validated against a list generated for P2 based on the default value of 'R1' for parameter P1. Hence, SSRS considers 'D' an invalid value for P2 and blanks out the P2 parameter.
The user can then use the drop down list for P2 and choose 'D', but this defeats the purpose of saving the parameter values to be used the next time.
Why is the stored procedure that provides a list of available values for parameter P2 using the default value of 'R1' for parameter P1 instead of using the value of 'R2' passed into the report for parameter P1?

Hi Tom,
Sorry for my delay.
If I understand correctly, you have two parameter in your report. It is a couple of cascading parameter. If we have choose ‘R1’ of P1, the P2 values is A, B, C. ‘R2’ of P1, corresponding P2 values is A, B, D. What your requirement is to save the end use
select option of these two parameters.
In SSRS, if we have configure the parameter with default value. When we run the report, the parameter will fill with the default value to filter data. If we want to save the last status we are render the report, we need to update the default value of P1.
If we are query the default value from database, if possible, we can
update the database try to resolve the issue. Alternatively, we can set the dynamic default value for the parameter.
Hope this helps.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

[Forum FAQ] How to use parameter to control the Expand/Collapse drill-down options in SSRS report?

In SQL Server Reporting Services (SSRS), drill-down is an action we can apply to any report item to hide and show other report items. They all are ways that we can organize and display data to help our users understand our report better. In this article,
we are talking about how to use parameter to control the Expand/Collapse drill-down options in SSRS report.
Consider that the report has a dataset (dsSales) with following fields: SalesTerritoryGroup, SalesTerritoryCountry, CalendarYear, SalesAmount.
1. The report has the following group settings:
Parent Group: SalesTerritoryGroup
Child Group: SalesTerritoryCountry
  Child Group: CalendarYear
   Details: SalesAmount
2. Add three parameters in the report:
GroupExpand:
Available Values: “Specify values”
Label: Yes           Value: Yes
Label: No            Value: No
Default Values: “Specify values”
Value: Yes
CountryExpand:
Available Values: “Specify values”
Label: Yes           Value: =IIF(Parameters!GroupExpand.Value="No",Nothing,"Yes")
Label: No            Value: No
Default Values: “Specify values”
Value: =IIF(Parameters!GroupExpand.Value="No","No","Yes")
YearExpand:
Available Values: “Specify values”
Label: Yes
Value: =IIF(Parameters!GroupExpand.Value="No" or Parameters!CountryExpand.Value="No",Nothing,"Yes")
Label: No            Value: No
Default Values: “Specify values”
Value: =IIF(Parameters!GroupExpand.Value="No" or Parameters!CountryExpand.Value="No","No","Yes")
3. Right click SalesTerritoryCountry icon in the Row Groups dialog box, select Group Properties.
4. Click Visibility in the left pane. Select “Show or hide based on an expression” and type with following expression:
=IIF(Parameters!GroupExpand.Value="Yes", False, True)
Select “Display can be toggled by this report item” option, and select “SalesTerritoryGroup” in the drop down list.
5. Use the same method setting CalendarYear, (Details) drill-down with following expression:
=IIF(Parameters!CountryExpand.Value="Yes", False, True)
=IIF(Parameters!YearExpand.Value="Yes", False, True)
6. Click SalesTerritoryGroup text box in the tablix. Select InitialToggleState property in the Properties dialog box, and type following expression:
=IIF(Parameters!GroupExpand.Value="Yes", True, False)
7. Use the same method setting SalesTerritoryCountry, CalendarYear text box with following expression:
=IIF(Parameters!CountryExpand.Value="Yes", True, False)
=IIF(Parameters!YearExpand.Value="Yes", True, False)
After that, when we preview the report, we can use these three parameters to expand/collapse drill-down.
Note:
In our test, we may meet following issue. We can check the expression of InitialToggleState property to troubleshooting the issue.
Applies to
Reporting Services 2008
Reporting Services 2008 R2
Reporting Services 2012

In SQL Server Reporting Services (SSRS), drill-down is an action we can apply to any report item to hide and show other report items. They all are ways that we can organize and display data to help our users understand our report better. In this article,
we are talking about how to use parameter to control the Expand/Collapse drill-down options in SSRS report.
Consider that the report has a dataset (dsSales) with following fields: SalesTerritoryGroup, SalesTerritoryCountry, CalendarYear, SalesAmount.
1. The report has the following group settings:
Parent Group: SalesTerritoryGroup
Child Group: SalesTerritoryCountry
  Child Group: CalendarYear
   Details: SalesAmount
2. Add three parameters in the report:
GroupExpand:
Available Values: “Specify values”
Label: Yes           Value: Yes
Label: No            Value: No
Default Values: “Specify values”
Value: Yes
CountryExpand:
Available Values: “Specify values”
Label: Yes           Value: =IIF(Parameters!GroupExpand.Value="No",Nothing,"Yes")
Label: No            Value: No
Default Values: “Specify values”
Value: =IIF(Parameters!GroupExpand.Value="No","No","Yes")
YearExpand:
Available Values: “Specify values”
Label: Yes
Value: =IIF(Parameters!GroupExpand.Value="No" or Parameters!CountryExpand.Value="No",Nothing,"Yes")
Label: No            Value: No
Default Values: “Specify values”
Value: =IIF(Parameters!GroupExpand.Value="No" or Parameters!CountryExpand.Value="No","No","Yes")
3. Right click SalesTerritoryCountry icon in the Row Groups dialog box, select Group Properties.
4. Click Visibility in the left pane. Select “Show or hide based on an expression” and type with following expression:
=IIF(Parameters!GroupExpand.Value="Yes", False, True)
Select “Display can be toggled by this report item” option, and select “SalesTerritoryGroup” in the drop down list.
5. Use the same method setting CalendarYear, (Details) drill-down with following expression:
=IIF(Parameters!CountryExpand.Value="Yes", False, True)
=IIF(Parameters!YearExpand.Value="Yes", False, True)
6. Click SalesTerritoryGroup text box in the tablix. Select InitialToggleState property in the Properties dialog box, and type following expression:
=IIF(Parameters!GroupExpand.Value="Yes", True, False)
7. Use the same method setting SalesTerritoryCountry, CalendarYear text box with following expression:
=IIF(Parameters!CountryExpand.Value="Yes", True, False)
=IIF(Parameters!YearExpand.Value="Yes", True, False)
After that, when we preview the report, we can use these three parameters to expand/collapse drill-down.
Note:
In our test, we may meet following issue. We can check the expression of InitialToggleState property to troubleshooting the issue.
Applies to
Reporting Services 2008
Reporting Services 2008 R2
Reporting Services 2012

Using a Simple Parameter Form Portlet with a Report Portlet to Search DB

My organization registers clients for workshops in iLearning.We use iPortal for our web site. I would like to use a Simple Parameter Form Portlet for clients to conduct a search on the data that is in iLearning and have it displayed in a Report Portlet on a separate page. I have been able to bring the iLearning data into the Report Portlet but I have not been successful in setting up the Simple Parameter Form Portlet to do a search on the data and then have it displayed. Any suggestions.

hi,
i just tested this in portal 10.1.4 and it works fine. you can fire an event and pass a parameter from a simple parameter form portlet and consume this page parameter in a portlet builder reports component. there is some documented behavior in bug 3321558 that has to do with personaliziation (customization in older releases). if you enter some personalization the page parameter gets ignored. for more information on this please contact oracle support services.
regards,
christian

Report using Parameter Field

Hi,
I have designed one report using Parameter Field which is Cost Code (string).
When I run my report, I ask to enter cost code. When I enter cost code 30, I get report for all transaction of cost code 30 and 300.
How could I avoid this problem.
Thanks
Mithani

Try with this
{Project_cost.EXPENSES_Code} IN {?Cost Code}
and also
Check the query formed after giving the input parameter. Goto Database --> Show Sql Query.

How to use pf-status u2018menuu2019 in ALV report ?

Hi Friends,
How to use pf-status u2018menuu2019 in ALV report ?
I want to use back button ( F3). whenever press it should show
another report.
I used subroutine
form SUB_ERROR_OUTPUT USING RT_EXTAB TYPE SLIS_T_EXTAB .
SET PF-STATUS 'ZMENU' EXCLUDING RT_EXTAB. u201C( the button name is u201C back u201C)
CASE SY-UCOMM.
*WHEN '&F03'.
WHEN 'BACK'
( my coding is there ).
endcase.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PF_STATUS_SET = 'SUB_ERROR_OUTPUT'
but it is executing, working the back button but not showing another report .
any other procedure to use back button in alv report ?
plz any idea .
For correct answer reword most.
Thanking you.

Purchase day Book .
Data to be down loaded / printed for EDP dept. CGL.
CGL - Requirement .
WRITTEN BY : ADI.****
*CONSULTANT : SANJAY JAJOO..
AS PER DP REQUIREMENT.
-CHANGED BY : KRISHNA MOHAN (15/01/2002)--
-CHANGE REQ BY : JAJU S--
-DESCRIPTION : SUMMRY BY TAX CODE WISE & GL CODE WISE--
---MODIFIED LINES: -
---CHANGED BY : -
---CHANGE REQ BY : -
---DESCRIPTION : -
---MODIFIED LINES: -
*---changed by : sanjay jajoo on 23/08
*---changed req by: Ranka
*---Description : Inserting Range of period as sel field
changed by : krishna mohan
func. consultant: sanjay jajoo
REPORT ZMMPURDB MESSAGE-ID 00
 LINE-SIZE 255
 LINE-COUNT 60
 NO STANDARD PAGE HEADING .
TABLES : MKPF , MSEG ,SKAT,
 EKKO , EKPO , EKBE ,
 BSEG , BKPF , BSET ,
 T009B , T001 , T007S ,
 T001W , T001K ,LFA1.
******Table deactivated on 30/8/2000------jaju
*tables : zcgltaxatn .
DATA : ZFILE1(65) VALUE '/DOWNLOAD/'.
DATA : ZFILE2(65) .
DATA : ZFILE(30) TYPE C VALUE '/DOWNLOAD/'.
DATA : ZMON(2).
DATA : ZTOTAL(11) TYPE N.
DATA: ZTOT1 TYPE P DECIMALS 2.
DATA: ZTXT LIKE SKAT-TXT50.
TYPES: BEGIN OF COMPANY ,
HKONT LIKE BSEG-HKONT,
TOTAL LIKE BSEG-DMBTR,
END OF COMPANY.
DATA: COMP TYPE COMPANY,
 COMPTAB TYPE HASHED TABLE OF COMPANY WITH UNIQUE KEY HKONT
 WITH HEADER LINE.
DATA : NEXT LIKE BSEG-BUZEI. "A.A. (28/03/2000)
DATA : DOC LIKE BSEG-BELNR. "A.A. (28/03/2000)
DATA S_GSBER.
DATA: CTR TYPE I.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-B01.
PARAMETERS : T_BUKRS LIKE T001-BUKRS OBLIGATORY MEMORY ID BUK .
***********CH--ID- ADI- 29 / 09 / 1999
SELECT-OPTIONS : ZGL FOR BSEG-HKONT OBLIGATORY.
***********CH--ID- ADI- 29 / 09 / 1999
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(9) TEXT-C01 .
PARAMETERS : POPER RADIOBUTTON GROUP RAD1 .
SELECTION-SCREEN COMMENT 13(7) TEXT-C02 .
PARAMETERS : MONTH RADIOBUTTON GROUP RAD1 .
SELECTION-SCREEN COMMENT 23(8) TEXT-C03 .
SELECTION-SCREEN POSITION 33 .
commented on 22/08 sanjay jajoo
*PARAMETERS : T_MONAT LIKE BKPF-MONAT .
SELECTION-SCREEN END OF LINE.
PARAMETERS : T_GJAHR LIKE BKPF-GJAHR OBLIGATORY .
SELECTION-SCREEN SKIP 1.
SELECT-OPTIONS : S_DOCTYP FOR BKPF-BLART,
 S_VENDOR FOR LFA1-LIFNR MATCHCODE OBJECT KRED,
 S_MATNR FOR BSEG-MATNR NO-DISPLAY,
 T_BUDAT FOR MKPF-BUDAT NO-EXTENSION MODIF ID DAT,
 p_gsber FOR bseg-gsber OBLIGATORY,
 P_GSBER FOR BSEG-GSBER,
mod starts for inserting range of period - sanjay jajoo
 T_MONAT FOR BKPF-MONAT OBLIGATORY.
mod ends
*SELECT-OPTIONS: br_blart FOR mkpf-blart.
*Select-options: br_blart for bkpf-blart.
SELECTION-SCREEN END OF BLOCK B1 .
Start of Delete by B.Elan on 23/12/2005
*PARAMETERS : errors AS CHECKBOX .
*PARAMETERS : summary AS CHECKBOX .
*PARAMETERS : nodetail AS CHECKBOX .
**selection-screen skip 2.
*SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-b03. "<<<
*Add
*PARAMETER : stax_reg RADIOBUTTON GROUP rad2 . "<<<
*Add
*PARAMETER : pur_db RADIOBUTTON GROUP rad2 . "<<<
*Add
*SELECTION-SCREEN END OF BLOCK b3 . "<<< Add
*SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-b02.
*PARAMETERS : display RADIOBUTTON GROUP grp1 ,
 dload RADIOBUTTON GROUP grp1.
*PARAMETERS : fname1 LIKE rlgrap-filename .
*DATA : zdoc LIKE bseg-belnr.
*DATA : fname LIKE rlgrap-filename.
*SELECTION-SCREEN END OF BLOCK b2 .
End of Delete by B.Elan on 23/12/2005
Start of Insert by B.Elan on 23/12/2005
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(5) TEXT-C01.
PARAMETER : PUR_DB RADIOBUTTON GROUP RAD2.
SELECTION-SCREEN COMMENT 10(25) TEXT-C06.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(5) TEXT-C01.
PARAMETERS : MAT_SM RADIOBUTTON GROUP RAD2.
SELECTION-SCREEN COMMENT 10(25) TEXT-C04.
SELECTION-SCREEN COMMENT 35(5) TEXT-C01.
PARAMETERS : VEN_SM RADIOBUTTON GROUP RAD2.
SELECTION-SCREEN COMMENT 44(20) TEXT-C05.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(5) TEXT-C01.
PARAMETERS : MAT_DT RADIOBUTTON GROUP RAD2.
SELECTION-SCREEN COMMENT 10(25) TEXT-C07.
SELECTION-SCREEN COMMENT 35(5) TEXT-C01.
PARAMETERS : VEN_DT RADIOBUTTON GROUP RAD2.
SELECTION-SCREEN COMMENT 44(20) TEXT-C08.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK B2.
End of Insert by B.Elan on 23/12/2005
Hard coded values used in the program
added by krishna mohan on 09/02/02
DATA : BEGIN OF IT_MSEG OCCURS 0,
 BELNR LIKE BSEG-BELNR,
 MBLNR LIKE MSEG-MBLNR,
 EBELN LIKE BSEG-EBELN,
 EBELP LIKE BSEG-EBELP,
 END OF IT_MSEG.
mod ends
Start of Insert by B.Elan on 23/12/2005
*--vikky
DATA : BEGIN OF IT_FINAL OCCURS 0,
 MATNR LIKE MARA-MATNR,
 BLART LIKE BKPF-BLART, " doctype
 BELNR LIKE BSEG-BELNR, "sr - nO 10
 XBLNR LIKE BKPF-XBLNR , " Bill-no 16
 NAME1_VENDOR(25),
 "lfa1-name1, " Vendor Name 35
 HKONT LIKE BSEG-HKONT , " Alloc-cd 10
 MWSKZ LIKE EKPO-MWSKZ , " St-cd 2
 BUDAT LIKE BKPF-BUDAT , " Bill-dt 10
 DUE_DATE LIKE BSEG-ZFBDT , " Due date 10
 PON LIKE EKKO-EBELN , " PON 10
 MAKTX LIKE MAKT-MAKTX, "Material text 40
 MBLNR LIKE MSEG-MBLNR,
 QTY(8) TYPE P DECIMALS 2 , "Qty 11
 RATE(9) TYPE P DECIMALS 2 , "Rate11
 DISCOUNT(7) TYPE P DECIMALS 2, "DISCOUNT 11
 PROD-AMT(9) TYPE P DECIMALS 2,
 "AMOUNT 13
 EXCISE(8) TYPE P DECIMALS 2 , "eXCISE TAX 11
 SALES(5) TYPE P DECIMALS 2 , "SALES TAX 11
 FREIGHT(9) TYPE P DECIMALS 2, "FREIGHT 11
 OTHERS(11) TYPE P DECIMALS 2, " OTHERS 11
 TOTAL(9) TYPE P DECIMALS 2, "TOTAL 17
 END OF IT_FINAL.
*DATA : BEGIN OF IT_FINAL OCCURS 0,
 MATNR LIKE MARA-MATNR,
 BLART LIKE BKPF-BLART, " doctype
 BELNR LIKE BSEG-BELNR, "sr - nO 10
 XBLNR LIKE BKPF-XBLNR , " Bill-no 16
 NAME1_VENDOR(25),
 "lfa1-name1, " Vendor Name 35
 HKONT LIKE BSEG-HKONT , " Alloc-cd 10
 MWSKZ LIKE EKPO-MWSKZ , " St-cd 2
 BUDAT LIKE BKPF-BUDAT , " Bill-dt 10
 DUE_DATE LIKE BSEG-ZFBDT , " Due date 10
 PON LIKE EKKO-EBELN , " PON 10
 MAKTX LIKE MAKT-MAKTX, "Material text 40
 MBLNR LIKE MSEG-MBLNR,
 QTY(13) TYPE P DECIMALS 2 , "Qty 11
 RATE(13) TYPE P DECIMALS 2 , "Rate 11
 DISCOUNT(13) TYPE P DECIMALS 2, "DISCOUNT 11
 PROD-AMT(13) TYPE P DECIMALS 2,
 "AMOUNT 13
 EXCISE(13) TYPE P DECIMALS 2 , "eXCISE TAX 11
 SALES(13) TYPE P DECIMALS 2 , "SALES TAX 11
 FREIGHT(13) TYPE P DECIMALS 2, "FREIGHT 11
 OTHERS(13) TYPE P DECIMALS 2, " OTHERS 11
 TOTAL(13) TYPE P DECIMALS 2, "TOTAL 17
 END OF IT_FINAL.
*--vikky
DATA : BEGIN OF IT_FINAL_VN OCCURS 0,
 NAME1_VENDOR(25),
 "lfa1-name1, " Vendor Name 35
 MATNR LIKE MARA-MATNR,
 BLART LIKE BKPF-BLART, " doctype
 BELNR LIKE BSEG-BELNR, "sr - nO 10
 XBLNR LIKE BKPF-XBLNR , " Bill-no 16
 HKONT LIKE BSEG-HKONT , " Alloc-cd 10
 MWSKZ LIKE EKPO-MWSKZ , " St-cd 2
 BUDAT LIKE BKPF-BUDAT , " Bill-dt 10
 DUE_DATE LIKE BSEG-ZFBDT , " Due date 10
 PON LIKE EKKO-EBELN , " PON 10
 MAKTX LIKE MAKT-MAKTX, "Material text 40
 MBLNR LIKE MSEG-MBLNR,
 QTY(8) TYPE P DECIMALS 2 , "Qty 11
 RATE(9) TYPE P DECIMALS 2 , "Rate 11
 DISCOUNT(7) TYPE P DECIMALS 2, "DISCOUNT 11
 PROD-AMT(9) TYPE P DECIMALS 2,
 "AMOUNT 13
 EXCISE(5) TYPE P DECIMALS 2 , "eXCISE TAX 11
 SALES(5) TYPE P DECIMALS 2 , "SALES TAX 11
 FREIGHT(5) TYPE P DECIMALS 2, "FREIGHT 11
 OTHERS(9) TYPE P DECIMALS 2, " OTHERS 11
 TOTAL(9) TYPE P DECIMALS 2, "TOTAL 17
 END OF IT_FINAL_VN.
End of Insert by B.Elan on 23/12/2005
DATA: BEGIN OF ITAB_DISPLAY OCCURS 0,
 BLART LIKE BKPF-BLART, " doctype
 BELNR LIKE BSEG-BELNR, "sr - nO 10
 XBLNR LIKE BKPF-XBLNR , " Bill-no 16
 NAME1_VENDOR(25), "lfa1-name1, " Vendor Name 35
 HKONT LIKE BSEG-HKONT , " Alloc-cd 10
 MWSKZ LIKE EKPO-MWSKZ , " St-cd 2
 BUDAT LIKE BKPF-BUDAT , " Bill-dt 10
 DUE_DATE LIKE BSEG-ZFBDT , " Due date 10
 PON LIKE EKKO-EBELN , " PON 10
 MAKTX LIKE MAKT-MAKTX, "Material text 40
 QTY(8) TYPE P DECIMALS 2 , "Qty 11
 "qty 5
 RATE(5) TYPE P DECIMALS 2 , "Rate 11
 mod starts on 21/08 for inc size to 7
 RATE(9) TYPE P DECIMALS 2 , "Rate 11
 "Rate 7
 mod ends - sanjay jajoo 21/08
 DISCOUNT(7) TYPE P DECIMALS 2, "DISCOUNT 11
 PROD-AMT(9) TYPE P DECIMALS 2, "AMOUNT 13
 EXCISE(5) TYPE P DECIMALS 2 , "eXCISE TAX 11
 SALES(5) TYPE P DECIMALS 2 , "SALES TAX 11
 FREIGHT(5) TYPE P DECIMALS 2, "FREIGHT 11
 OTHERS(9) TYPE P DECIMALS 2, " OTHERS 11 " added by vik on
*21.08.2008
 TOTAL(9) TYPE P DECIMALS 2, "TOTAL 17
 TOTAL1(9) TYPE P DECIMALS 2,
 MATNR LIKE MARA-MATNR,
 EBELN LIKE EKPO-EBELN,
 EBELP LIKE EKPO-EBELP,
 END OF ITAB_DISPLAY.
DATA: BEGIN OF ITAB_TOTAL1 OCCURS 0,
 HKONT LIKE BSEG-HKONT,
 TOTAL TYPE P DECIMALS 2,
 TXT50 LIKE SKAT-TXT50,
 END OF ITAB_TOTAL1.
DATA: BEGIN OF ITAB_KONV OCCURS 0,
 KNUMV LIKE KONV-KNUMV,
 KPOSN LIKE KONV-KPOSN,
 STUNR LIKE KONV-STUNR,
 ZAEHK LIKE KONV-ZAEHK,
 KSCHL LIKE KONV-KSCHL,
 KWERT LIKE KONV-KWERT,
 END OF ITAB_KONV.
DATA:BEGIN OF ITAB_RATE_MODVAT OCCURS 0,
 EBELN LIKE EKPO-EBELN,
 EBELP LIKE EKPO-EBELP,
 MENGE LIKE EKPO-MENGE,
 BRTWR LIKE EKPO-BRTWR,
 KZWI5 LIKE EKPO-KZWI5,
 KNUMV LIKE EKKO-KNUMV,
 MATNR LIKE EKPO-MATNR,
 TXZ01 LIKE EKPO-TXZ01,
 END OF ITAB_RATE_MODVAT.
DATA: BEGIN OF ITAB_PO OCCURS 0,
 EBELN LIKE EKPO-EBELN,
 EBELP LIKE EKPO-EBELP,
 END OF ITAB_PO.
DATA: BEGIN OF ITAB_PO_ITEM OCCURS 0,
 BELNR LIKE BSEG-BELNR,
 EBELN LIKE BSEG-EBELN,
 BUZID LIKE BSEG-BUZID,
 XBLNR LIKE BKPF-XBLNR,
 MATNR LIKE BSEG-MATNR,
 EBELP LIKE BSEG-EBELP,
 MENGE LIKE BSEG-MENGE,
 WRBTR LIKE BSEG-WRBTR,
 EXCISE LIKE BSEG-DMBTR, " ADDED ON 21/01/02 FOR 27500 EXCISE
 SGTXT LIKE BSEG-SGTXT, " ADDED ON 24/01/02
 FLAG,
 END OF ITAB_PO_ITEM.
DATA:BEGIN OF I_LFA1 OCCURS 0,
 LIFNR LIKE BSEG-LIFNR,
 END OF I_LFA1.
DATA: BEGIN OF I_VENDOR OCCURS 0,
 LIFNR LIKE LFA1-LIFNR,
 NAME1 LIKE LFA1-NAME1,
 END OF I_VENDOR.
DATA: BEGIN OF ITAB_PO_OTHERS OCCURS 0,
 BELNR LIKE BSEG-BELNR,
 MATNR LIKE BSEG-MATNR,
 EBELN LIKE BSEG-EBELN,
 EBELP LIKE BSEG-EBELP,
 MENGE LIKE BSEG-MENGE,
 WRBTR LIKE BSEG-WRBTR,
 END OF ITAB_PO_OTHERS.
DATA: BEGIN OF ITAB_FINAL OCCURS 0,
 BUKRS LIKE BSEG-BUKRS,
 BELNR LIKE BSEG-BELNR,
 GJAHR LIKE BSEG-GJAHR,
 BUZEI LIKE BSEG-BUZEI,
 BUZID LIKE BSEG-BUZID,
 SHKZG LIKE BSEG-SHKZG,
 EBELN LIKE BSEG-EBELN,
 EBELP LIKE BSEG-EBELP,
 MENGE LIKE BSEG-MENGE,
 WRBTR LIKE BSEG-WRBTR,
 MATNR LIKE BSEG-MATNR,
 HKONT LIKE BSEG-HKONT, " ADDED ON 21/01/02 FOR 27500 EXCISE
 SGTXT LIKE BSEG-SGTXT, " ADDED ON 24/01/02 FOR SALES TAX
 END OF ITAB_FINAL.
DATA : BEGIN OF ITAB OCCURS 100 ,
 MWSKZ LIKE EKPO-MWSKZ , " St-cd
 HKONT LIKE BSEG-HKONT , " Alloc-cd
 MBLNR LIKE MKPF-MBLNR , " Sr-No
 LIFNR LIKE LFA1-LIFNR , " Supp-cd
 XBLNR LIKE BKPF-XBLNR , " Bill-no
 BUDAT LIKE BKPF-BUDAT , " Bill-dt
 DUE_DATE LIKE BSEG-ZFBDT , " Due date
 PON LIKE EKKO-EBELN , " PON
 BELNR LIKE BKPF-BELNR , " CCI no
 DMBTR LIKE BSEG-DMBTR , " Prod-amount
 EXCISE LIKE BSEG-DMBTR , " Excise / ModVAT
 ST_INV LIKE BSEG-DMBTR , " Sales Tax Loaded on Inv.
 ST_SET LIKE BSEG-DMBTR , " Sales Tax setoff .
 OCT_TOT LIKE BSEG-DMBTR , " A,A, (29/03/2000) Octroi chargs
 PT_PABLE LIKE BSEG-DMBTR , " Purchase tax payable
 ST_TOT LIKE BSEG-DMBTR , " Sales Tax total
 OTHR_CHRG LIKE BSEG-DMBTR , " Other chagres
 NEBTR LIKE BSEG-NEBTR, " Total-amount
 NAME1_VENDOR LIKE LFA1-NAME1, " Vendor Name
 END OF ITAB.
DATA: BEGIN OF ITAB_DOC OCCURS 0,
 BELNR LIKE BKPF-BELNR,
 BLART LIKE BKPF-BLART,
 END OF ITAB_DOC.
DATA : BEGIN OF DOCTAB OCCURS 100 ,
 MWSKZ LIKE BSEG-MWSKZ ,
 HKONT LIKE BSEG-HKONT ,
 BELNR LIKE BKPF-BELNR ,
Changed By Pankaj 19.03.99
Included field fiscal year
 GJAHR LIKE BKPF-GJAHR ,
 BUDAT LIKE BKPF-BUDAT ,
 XBLNR LIKE BKPF-XBLNR ,
 LIFNR LIKE LFA1-LIFNR ,
 ZTERM LIKE BSEG-ZTERM ,
 AMOUNT LIKE BSEG-DMBTR ,
 DMBTR LIKE BSEG-DMBTR ,
 OTHR_CHRG LIKE BSEG-DMBTR ,
 MBLNR LIKE MKPF-MBLNR ,
 MJAHR LIKE MSEG-MJAHR ,
 DUE_DATE LIKE BSEG-ZFBDT ,
 PON LIKE EKKO-EBELN ,
 JMO1 LIKE BSEG-DMBTR ,
 JMO2 LIKE BSEG-DMBTR ,
 JIP1 LIKE BSEG-DMBTR ,
 JIP2 LIKE BSEG-DMBTR ,
************CH-ID-ADI-START-28 / 09 / 1999
 JIP4 LIKE BSEG-DMBTR ,
 ZTUT LIKE BSEG-DMBTR ,
*****************ABEY
 ZOCT LIKE BSEG-DMBTR ,
*****************END
************CH-ID-ADI-START-28 / 09 / 1999
 ZSET LIKE BSEG-DMBTR ,
 ZPTX LIKE BSEG-DMBTR ,
 BLART LIKE BKPF-BLART ,
 END OF DOCTAB .
Download for EDP "EDP
DATA : BEGIN OF DOWNLOAD OCCURS 100 ,
 SIGN1(1) ,
 TOT_VAL(11) TYPE N,
 SIGN2(1) ,
 TAXABLE(11) TYPE N ,
 SIGN3(1) ,
 TOT_TAX(11) TYPE N ,
 SIGN4(1) ,
 SURCHARG(9) TYPE N ,
 SIGN5(1) ,
 ST_AMT(9) TYPE N ,
 SIGN6(1) ,
 OTH_CHRG(9) TYPE N ,
******************************ch-adi-start-28 / 09 / 1999
 SIGN7(1),
 TOT(9) TYPE N,
******************************ch-adi-end-28 / 09 / 1999
 TYPE(1) TYPE N ,
 STKY1(1) TYPE N ,
 STBR(2) ,
 STDV(2) ,
 STCC(1) ,
 STKY(1) ,
 STDC(2) TYPE N ,
 STTYP(1) ,
 STCODE(2) ,
 STRATE(2) TYPE N ,
 STRTT(2) TYPE N ,
 SERIAL_NO(6) TYPE N ,
 STACP(9) ,
 BLANK1(3) ,
 STYRMN(6) ,
 BLANK2(7) TYPE C .
DATA : END OF DOWNLOAD .
DATA : BEGIN OF GLTAB OCCURS 5 ,
 MWSKZ LIKE BSEG-MWSKZ, " << ADD A.A. (01.02.2000)
 HKONT LIKE BSEG-HKONT ,
 DMBTR LIKE BSEG-DMBTR , " Prod-amount
 EXCISE LIKE BSEG-DMBTR , " Excise / ModVAT
 ST_INV LIKE BSEG-DMBTR , " Sales Tax Loaded on Inv.
 ST_SET LIKE BSEG-DMBTR , " Sales Tax setoff .
 PT_PABLE LIKE BSEG-DMBTR , " Purchase tax payable
 ST_TOT LIKE BSEG-DMBTR , " Sales Tax total
 OTHR_CHRG LIKE BSEG-DMBTR , " Other Charges
 NEBTR LIKE BSEG-NEBTR. " Total-amount
DATA : END OF GLTAB .
DATA : BEGIN OF ERRORTAB OCCURS 5 .
 INCLUDE STRUCTURE ITAB .
DATA : END OF ERRORTAB .
*- Start of change by Raj on 3-Spet-05
DATA : V_TMPVAL TYPE P DECIMALS 2.
*- End of change by Raj on 3-Spet-05
DATA : STRING LIKE BKPF-AWKEY ,
 V_NO TYPE I,
 V_EBELN LIKE BSEG-EBELN,
 V_MATNR LIKE BSEG-MATNR. " ADDED ON 21/01/02 FOR BUZID = 'S'
Start of Insert by B.Elan on 23/12/2005
WORK AREA
DATA : WA_DISPLAY LIKE ITAB_DISPLAY.
DATA : V_UCOMM TYPE SY-UCOMM.
CONSTANTS : C_X TYPE C VALUE 'X'.
End of Insert by B.Elan on 23/12/2005
AT SELECTION-SCREEN ON T_BUKRS.
SELECT SINGLE * FROM T001 WHERE BUKRS = T_BUKRS .
IF SY-SUBRC NE 0 .
 MESSAGE E368 WITH T_BUKRS TEXT-M01 .
ENDIF .
AT SELECTION-SCREEN ON T_MONAT.
PERFORM check_period_year USING 'X'. " COMMENTED
AT SELECTION-SCREEN ON T_GJAHR.
PERFORM check_period_year USING ' '. "COMMENTED
Start of Delete by B.Elan on 23/12/2005
*AT SELECTION-SCREEN ON RADIOBUTTON GROUP grp1 .
CLEAR fname .
DATA : BEGIN OF xt247 OCCURS 12 .
 INCLUDE STRUCTURE t247 .
DATA : END OF xt247 .
CHECK dload EQ 'X' .
REFRESH xt247 .
IF poper EQ 'X' .
 MESSAGE e368 WITH text-m05 .
ENDIF .
CALL FUNCTION 'MONTH_NAMES_GET'
 TABLES
 month_names = xt247
 EXCEPTIONS
 month_names_not_found = 1
 OTHERS = 2.
READ TABLE xt247 WITH KEY mnr = t_monat .
CONCATENATE 'STAXSUMM.' xt247-ktx INTO fname .
CONCATENATE '
DOWNLOAD\' fname INTO fname1.
CONCATENATE zfile1 fname INTO zfile2.
CONDENSE fname1 NO-GAPS.
CONDENSE zfile2 NO-GAPS.
CONCATENATE 'STAXSUMM.' xt247-ktx INTO fname .
End of Delete by B.Elan on 23/12/2005
AT SELECTION-SCREEN OUTPUT .
LOOP AT SCREEN .
 IF SCREEN-NAME EQ 'FNAME' .
 SCREEN-INPUT = 0.
 MODIFY SCREEN .
 ENDIF .
 IF SCREEN-GROUP2 EQ 'DBS' .
 SCREEN-ACTIVE = 0 .
 MODIFY SCREEN .
 IF SCREEN-NAME EQ 'BR_BLART-LOW' .
Form the select option for the LDB .
 CLEAR BR_BLART . REFRESH BR_BLART .
 BR_BLART-SIGN = 'I' .
 BR_BLART-OPTION = 'EQ' .
 BR_BLART-LOW = 'RE' .
 APPEND BR_BLART .
 BR_BLART-SIGN = 'I' .
 BR_BLART-OPTION = 'EQ' .
 BR_BLART-LOW = 'SR' .
 APPEND BR_BLART .
 BR_BLART-SIGN = 'I' .
 BR_BLART-OPTION = 'EQ' .
 BR_BLART-LOW = 'SP' .
 APPEND BR_BLART . " ADD ON 11122003 JAJ
 BR_BLART-SIGN = 'I' .
 BR_BLART-OPTION = 'EQ' .
 br_blart-low = 'VI' .
 BR_BLART-LOW = 'ST'.
 APPEND BR_BLART .
 BR_BLART-LOW = 'S1'.
 APPEND BR_BLART .
 BR_BLART-LOW = 'P1'.
 APPEND BR_BLART .
 BR_BLART-LOW = 'PM'.
 APPEND BR_BLART .
 BR_BLART-LOW = 'R1'.
 APPEND BR_BLART .
 BR_BLART-SIGN = 'I' .
 BR_BLART-OPTION = 'EQ' .
 BR_BLART-LOW = 'KR' .
 APPEND BR_BLART .
 BR_BLART-SIGN = 'I' .
 BR_BLART-OPTION = 'EQ' .
*************CH-ID-ADI---30 / 09 / 1999.
 BR_BLART-LOW = 'RA'.
 APPEND BR_BLART .
 BR_BLART-SIGN = 'I' .
 BR_BLART-OPTION = 'EQ' .
 BR_BLART-LOW = 'EM'.
 APPEND BR_BLART .
 BR_BLART-SIGN = 'I' .
 BR_BLART-OPTION = 'EQ' .
 BR_BLART-LOW = 'EI' .
 APPEND BR_BLART .
 ENDIF .
 ENDIF .
 CHECK SCREEN-GROUP1 EQ 'DAT' .
 SCREEN-INPUT = 0.
 MODIFY SCREEN .
ENDLOOP .
START-OF-SELECTION .
Block 1 - Selection of accounting documents in the posting period
is done through the LDB
GET BKPF .
commented on 22/08
CHECK BKPF-MONAT = T_MONAT.
CHECK BKPF-MONAT IN T_MONAT.
CHECK BKPF-GJAHR = T_GJAHR.
CHECK BKPF-STBLG IS INITIAL . "<<<< Reversed
*CHECK bkpf-budat IN t_budat .
CHECK BKPF-BUKRS EQ T_BUKRS .
CHECK BKPF-BUKRS EQ T_BUKRS .
CHECK BKPF-BSTAT EQ SPACE . "<<< Sample docs
CHECK BKPF-BLART EQ 'RE' "MM-IV
 OR BKPF-BLART EQ 'KR' "FI-IV
OR bkpf-blart EQ 'VI' "FI-IV Direct
*************CH-ID-ADI-30 / 09 / 1999
OR bkpf-blart EQ 'RA' "CASH CCI
OR bkpf-blart EQ 'EM' "MAINTAINANCE
OR bkpf-blart EQ 'EI' . "IDT
 OR BKPF-BLART EQ 'P1'
 OR BKPF-BLART EQ 'PM'
 OR BKPF-BLART EQ 'R1'
 OR BKPF-BLART EQ 'S1'
 OR BKPF-BLART EQ 'ST'
 OR BKPF-BLART EQ 'SR' " ADD ON 101203 JAJ
 OR BKPF-BLART EQ 'SP'.
*************CH-ID-ADI-30 / 09 / 1999
CLEAR DOCTAB .
DOCTAB-BLART = BKPF-BLART .
DOCTAB-BELNR = BKPF-BELNR .
DOCTAB-BUDAT = BKPF-BUDAT .
DOCTAB-XBLNR = BKPF-XBLNR .
Added By Pankaj 19.03.99
Initializing fiscal year for document table
DOCTAB-GJAHR = BKPF-GJAHR .
APPEND DOCTAB.
Tax details
GET BSET . " Commented because LDB gives wrong BSET entries
" for some documents
CASE BSET-KSCHL .
 WHEN 'JMO1' .
 DOCTAB-JMO1 = DOCTAB-JMO1 + BSET-HWSTE .
 WHEN 'JMO2' .
 DOCTAB-JMO2 = DOCTAB-JMO2 + BSET-HWSTE .
 WHEN 'JIP1' .
 DOCTAB-JIP1 = DOCTAB-JIP1 + BSET-HWSTE .
 WHEN 'JIP2' .
 DOCTAB-JIP2 = DOCTAB-JIP2 + BSET-HWSTE .
 WHEN 'ZSET' .
 break deven .
 DOCTAB-ZSET = DOCTAB-ZSET + BSET-HWSTE .
 WHEN 'ZPTX' .
 DOCTAB-ZPTX = DOCTAB-ZPTX + BSET-HWSTE .
ENDCASE .
DOCTAB-MWSKZ = BSET-MWSKZ.
MODIFY DOCTAB INDEX SY-TABIX.
Item details
*changed by srinivas yerra.
GET BSEG .
IF BSEG-KOART = 'K' . "<<< Vendor Line
IF BSEG-KOART = 'K' .
*end of chnages by srinivas yerra.
 DOCTAB-LIFNR = BSEG-LIFNR .
 IF NOT BSEG-ZTERM IS INITIAL .
 DOCTAB-ZTERM = BSEG-ZTERM .
 DOCTAB-DUE_DATE = BSEG-ZFBDT + BSEG-ZBD1T .
 ENDIF .
 IF BSEG-SHKZG EQ 'H' . "<< Add credits
 DOCTAB-AMOUNT = DOCTAB-AMOUNT + BSEG-DMBTR .
 ELSE . "<< Subtr debits
 DOCTAB-AMOUNT = DOCTAB-AMOUNT - BSEG-DMBTR .
 ENDIF .
ENDIF .
CASE BSEG-KTOSL .
 WHEN 'WRX' .
 DOCTAB-PON = BSEG-EBELN .
 IF DOCTAB-MWSKZ IS INITIAL .
 DOCTAB-MWSKZ = BSEG-MWSKZ .
 ENDIF .
 WHEN 'BSX' .
***********ABEY
 IF NEXT = BSEG-BUZEI
 AND
 DOC = BSEG-BELNR
 AND
 ( BSEG-BUZID = 'M'
 OR
 BSEG-HKONT = 50765 ).
 DOCTAB-ZOCT = DOCTAB-ZOCT + BSEG-DMBTR.
 IF BSEG-SHKZG EQ 'H' . "<< Subtr credits
 DOCTAB-OTHR_CHRG = DOCTAB-OTHR_CHRG - BSEG-DMBTR .
 ELSE . "<< Add debits
 DOCTAB-OTHR_CHRG = DOCTAB-OTHR_CHRG + BSEG-DMBTR .
 ENDIF .
 ENDIF .
************END
 IF BSEG-SHKZG EQ 'S' .
 DOCTAB-DMBTR = DOCTAB-DMBTR + BSEG-DMBTR .
 ELSE .
 DOCTAB-DMBTR = DOCTAB-DMBTR - BSEG-DMBTR .
 ENDIF .
 WHEN 'OCT' OR 'FRE' OR 'FR1' OR SPACE .
*****CH-ID-ADI-30 / 09 /1999.
 IF ( ( BKPF-BLART = 'EM' OR BKPF-BLART = 'RA' OR BKPF-BLART =
 'EI')
 AND BSEG-KTOSL = SPACE ) OR BSEG-MWSKZ = '9W' OR BSEG-MWSKZ =
 'K9' OR
 BSEG-MWSKZ =
 'X9'.
 DOCTAB-OTHR_CHRG = 0.
 ELSE.
*********CH-ID-ADI--01 / 10 / 1999
 Other Charges only for accounts other than vendor acc.
 CHECK BSEG-BUZID NE 'T' .
 CHECK BSEG-BUZID NE 'P' .
 IF BSEG-KOART NE 'K' .
*********ABEY (25/02/2000), (21/02/2000)
 IF BSEG-BUZID = 'F'
 OR BSEG-HKONT = 75461.
 NEXT = BSEG-BUZEI + 1.
 DOC = BSEG-BELNR.
 DOCTAB-ZOCT = DOCTAB-ZOCT + BSEG-DMBTR.
 ENDIF.
 IF BSEG-BUZEI = NEXT
 AND
 ( BSEG-BUZID = 'M'
 OR
 BSEG-HKONT = 50765 ).
 DOCTAB-ZOCT = DOCTAB-ZOCT + BSEG-DMBTR.
 ENDIF.
*********END
 IF BSEG-SHKZG EQ 'H' . "<< Subtr credits
 DOCTAB-OTHR_CHRG = DOCTAB-OTHR_CHRG - BSEG-DMBTR .
 ELSE . "<< Add debits
 DOCTAB-OTHR_CHRG = DOCTAB-OTHR_CHRG + BSEG-DMBTR .
 ENDIF .
 ENDIF .
*****NEXT-LINE ADDED BY ADI
 ENDIF .
*************END.
ENDCASE .
*CHANGED BY SRINIVAS YERRA
*MODIFY DOCTAB INDEX SY-TABIX.
APPEND DOCTAB.
*END OF CHANGES.
PO History
GET EKBE .
CHECK DOCTAB-BELNR EQ EKBE-BELNR .
DOCTAB-MBLNR = EKBE-LFBNR .
DOCTAB-MJAHR = EKBE-LFGJA .
MODIFY DOCTAB INDEX SY-TABIX .
PERFORM show_indicator USING text-m02 .
*PERFORM convert_data.
END-OF-SELECTION .
Data read from LDB is converted into printable format.
PERFORM SHOW_INDICATOR USING TEXT-M04 .
PERFORM CONVERT_DATA .
Start of Delete by B.Elan on 23/12/2005
IF stax_reg EQ 'X' . "<<< Add
 SORT itab BY mwskz hkont belnr .
ELSE . "<<< Add
 SORT itab BY belnr . "<<< Add
 SORT itab BY pon.
ENDIF . "<<< Add
Perform further operation based on user input
IF display EQ 'X' .
 PERFORM write_itab.
 PERFORM write_data .
ELSE .
PERFORM download_data .
ENDIF .
End of Delete by B.Elan on 23/12/2005
Start of Insert by B.Elan on 23/12/2005
SORT ITAB BY BELNR.
PERFORM WRITE_DATA.
IF MAT_SM = C_X.
 PERFORM WRITE_MATERIAL_SUMMARY.
ELSEIF MAT_DT = C_X.
 PERFORM WRITE_MATERIAL_DETAILS.
ELSEIF VEN_SM = C_X.
 PERFORM WRITE_VENDOR_SUMMARY.
ELSEIF VEN_DT = C_X.
 PERFORM WRITE_VENDOR_DETAILS.
ENDIF.
End of Insert by B.Elan on 23/12/2005
Start of Insert by B.Elan on 23/12/2005
AT USER-COMMAND.
V_UCOMM = SY-UCOMM.
CASE V_UCOMM.
 WHEN 'DETLS'.
 NEW-PAGE.
 PUR_DB = C_X.
 PERFORM CLEAR_DETAILS.
 PERFORM WRITE_DATA.
 WHEN 'MSUMRY'.
 PERFORM WRITE_MATERIAL_SUMMARY.
 WHEN 'MDETL'.
 PERFORM WRITE_MATERIAL_DETAILS.
 WHEN 'VSUMRY'.
 PERFORM WRITE_VENDOR_SUMMARY.
 WHEN 'VDETL'.
 PERFORM WRITE_VENDOR_DETAILS.
 WHEN 'EXIT'.
 LEAVE PROGRAM.
ENDCASE.
End of Insert by B.Elan on 23/12/2005
*- - - - - - - - - End Of Execution .- - - - - - - - - - - - - - - - - -
TOP-OF-PAGE .
IF PUR_DB = C_X.
 PERFORM TOP_OF_PAGE.
 PERFORM TOP_OF_PAGE_PUR_DB.
ELSEIF MAT_SM = C_X.
 PERFORM TOP_OF_PAGE.
 PERFORM TOP_OF_PAGE_MAT_SM.
ELSEIF MAT_DT = C_X.
 PERFORM TOP_OF_PAGE.
 PERFORM TOP_OF_PAGE_MAT_DT.
ELSEIF VEN_SM = C_X.
 PERFORM TOP_OF_PAGE.
 PERFORM TOP_OF_PAGE_VEN_SM.
ELSEIF VEN_DT = C_X.
 PERFORM TOP_OF_PAGE.
 PERFORM TOP_OF_PAGE_VEN_DT.
ENDIF.
TOP-OF-PAGE DURING LINE-SELECTION.
CASE V_UCOMM.
 WHEN 'DETLS'.
 PERFORM TOP_OF_PAGE.
 PERFORM TOP_OF_PAGE_PUR_DB.
 WHEN 'MSUMRY'.
 PERFORM TOP_OF_PAGE.
 PERFORM TOP_OF_PAGE_MAT_SM.
 WHEN 'MDETL'.
 PERFORM TOP_OF_PAGE.
 PERFORM TOP_OF_PAGE_MAT_DT.
 WHEN 'VSUMRY'.
 PERFORM TOP_OF_PAGE.
 PERFORM TOP_OF_PAGE_VEN_SM.
 WHEN 'VDETL'.
 PERFORM TOP_OF_PAGE.
 PERFORM TOP_OF_PAGE_VEN_DT.
ENDCASE.
*& Form WRITE_DATA
 text *
FORM WRITE_DATA.
DATA: V_SALES LIKE ITAB_DISPLAY-SALES,
 V_RATE LIKE ITAB_DISPLAY-RATE,
 V_DISCOUNT LIKE ITAB_DISPLAY-DISCOUNT,
 V_PROD-AMT LIKE ITAB_DISPLAY-PROD-AMT,
 V_EXCISE1 LIKE ITAB_DISPLAY-EXCISE,
 V_EXCISE LIKE ITAB_DISPLAY-EXCISE,
 V_PON LIKE ITAB_DISPLAY-PON,
 V_OTHERS LIKE ITAB_DISPLAY-OTHERS,
 V_FREIGHT LIKE ITAB_DISPLAY-FREIGHT.
CLEAR ITAB .
Write the correct data i.e. tax code and G/L code both available .
LOOP AT ITAB .
*************CH-ID-ADI-30 / 09 / 1999
 IF ( ITAB-MWSKZ = '9W' OR ITAB-MWSKZ = 'K9' OR ITAB-MWSKZ = 'X9' )
 AND ITAB-OTHR_CHRG NE 0 .
 ITAB-DMBTR = ITAB-OTHR_CHRG.
 ITAB-OTHR_CHRG = 0.
 MODIFY ITAB.
 ENDIF.
ENDLOOP.
LOOP AT ITAB.
 I_LFA1-LIFNR = ITAB-LIFNR.
 APPEND I_LFA1.
 CLEAR I_LFA1.
ENDLOOP.
SORT I_LFA1.
DELETE ADJACENT DUPLICATES FROM I_LFA1 COMPARING ALL FIELDS.
SELECT LIFNR
 NAME1
 FROM LFA1 INTO TABLE I_VENDOR
 FOR ALL ENTRIES IN I_LFA1 WHERE
 LIFNR = I_LFA1-LIFNR.
FREE I_LFA1.
LOOP AT ITAB.
 READ TABLE I_VENDOR WITH KEY LIFNR = ITAB-LIFNR .
 IF SY-SUBRC EQ 0.
 ITAB-NAME1_VENDOR = I_VENDOR-NAME1.
 MODIFY ITAB TRANSPORTING NAME1_VENDOR.
 ENDIF.
ENDLOOP.
LOOP AT ITAB.
 IF NOT ITAB-LIFNR IN S_VENDOR.
 DELETE ITAB.
 ENDIF.
ENDLOOP.
SELECT BUKRS BELNR GJAHR BUZEI BUZID SHKZG EBELN EBELP ERFMG WRBTR
 MATNR HKONT SGTXT " ERFMG for MENGE,HKONT,SGTXT Added by KrishnaMohan
 INTO TABLE ITAB_FINAL
 FROM BSEG FOR ALL ENTRIES IN ITAB
 WHERE BUKRS = T_BUKRS AND "'1000' AND
 BELNR = ITAB-BELNR AND
*added by srinivas
 hkont in zgl and
*end
 GJAHR = T_GJAHR AND
*- Start of change by Raj on 030905
 buzid IN ('W', 'M', 'K', 'S', 'F' , 'P' ) AND
 BUZID IN ('W', 'M', 'K', 'S', 'F' , 'P' , 'T', ' ') AND
 " ADD T 090206 JAJ
 KOART <> 'K' AND " mod by vik on 21.08.2008" sjaj si
*- End of change by Raj on 030905
BUZID = P Added on 21/01/02 by Krishna Mohan
 GSBER IN P_GSBER AND
 gsber IN p_gsber OR gsber = ' ' AND
 MATNR IN S_MATNR.
SELECT BELNR BLART INTO TABLE ITAB_DOC FROM BKPF
 FOR ALL ENTRIES IN ITAB_FINAL WHERE
 BUKRS = T_BUKRS AND "'1000' AND
 BELNR = ITAB_FINAL-BELNR AND
 GJAHR = T_GJAHR AND
 BLART NOT IN ('WA' , 'WE').
SORT ITAB_DOC BY BELNR BLART.
LOOP AT ITAB_DOC.
 IF NOT ITAB_DOC-BLART IN S_DOCTYP .
 DELETE ITAB_DOC.
 ENDIF.
ENDLOOP.
LOOP AT ITAB_FINAL.
 READ TABLE ITAB_DOC WITH KEY BELNR = ITAB_FINAL-BELNR BINARY SEARCH.
 IF SY-SUBRC NE 0.
 DELETE ITAB_FINAL.
 ENDIF.
ENDLOOP.
DELETE ITAB_FINAL WHERE BUZID = 'K' AND BUZEI = '1'.
LOOP AT ITAB_FINAL WHERE SHKZG = 'H'.
 ITAB_FINAL-WRBTR = ITAB_FINAL-WRBTR * ( -1 ).
 MODIFY ITAB_FINAL TRANSPORTING WRBTR.
ENDLOOP.
LOOP AT ITAB_FINAL WHERE BUZID = 'M'.
 IF ITAB_FINAL-SGTXT NE ' '.
 TRANSLATE ITAB_FINAL-SGTXT TO UPPER CASE.
 MODIFY ITAB_FINAL.
 ENDIF.
ENDLOOP.
LOOP AT ITAB_FINAL .
 IF ITAB_FINAL-BUZID = 'W'.
 CLEAR V_MATNR.
 V_EBELN = ITAB_FINAL-EBELN.
 V_MATNR = ITAB_FINAL-MATNR.
 ITAB_PO_ITEM-BELNR = ITAB_FINAL-BELNR.
 ITAB_PO_ITEM-BUZID = ITAB_FINAL-BUZID.
 ITAB_PO_ITEM-MATNR = ITAB_FINAL-MATNR.
 ITAB_PO_ITEM-EBELN = ITAB_FINAL-EBELN.
 ITAB_PO_ITEM-EBELP = ITAB_FINAL-EBELP.
 ITAB_PO_ITEM-MENGE = ITAB_FINAL-MENGE.
 ITAB_PO_ITEM-WRBTR = ITAB_FINAL-WRBTR.
 COLLECT ITAB_PO_ITEM.
 CLEAR ITAB_PO_ITEM.
 ELSEIF ITAB_FINAL-BUZID = 'M' OR ITAB_FINAL-BUZID = 'K' OR
 ITAB_FINAL-BUZID = 'S' OR
 ITAB_FINAL-BUZID = 'P' OR " ADDED ON 21/01/02
*- Start of change by Raj on 030905
 ITAB_FINAL-BUZID = ' ' OR
 ITAB_FINAL-BUZID = 'T' OR " ADD BY JAJ ON 090206
*- End of change by Raj on 030905
 ITAB_FINAL-BUZID = 'F'.
 IF ITAB_FINAL-MATNR IS INITIAL.
 ITAB_FINAL-MATNR = V_MATNR.
 ENDIF.
 CLEAR V_MATNR.
 ITAB_PO_OTHERS-BELNR = ITAB_FINAL-BELNR.
 ITAB_PO_OTHERS-MATNR = ITAB_FINAL-MATNR.
 ITAB_PO_OTHERS-EBELN = ITAB_FINAL-EBELN.
 ITAB_PO_OTHERS-EBELP = ITAB_FINAL-EBELP.
 ITAB_PO_OTHERS-MENGE = ITAB_FINAL-MENGE.
 ITAB_PO_OTHERS-WRBTR = ITAB_FINAL-WRBTR.
IF CONDITION,ADDED ON 21/01/02 FOR GETTING EXCISE WHEN CONDITION MEETS
ie TOTAL AMOUNT = EXCISE WHEN BUZID = S AND HKONT = 27500
*IF itab_final-buzid = 'S' AND ( itab_final-hkont = '0000027500' OR "
*COMM BY JAJ ON 090206
 IF ITAB_FINAL-BUZID = 'S' OR ITAB_FINAL-BUZID = 'T' AND (
 ITAB_FINAL-HKONT = '0000027500' OR
 ITAB_FINAL-HKONT = '0000027515'
 OR ITAB_FINAL-HKONT = '0000027550' " jaj on 090206
 OR ITAB_FINAL-HKONT = '0000027507' OR
 ITAB_FINAL-HKONT = '0000027508'). "Added on 050905 - Raj
 ITAB_FINAL-EBELN = V_EBELN.
to get ebeln value into header so that when there are 2 po's
and 2 W's excise can go into only one po which is v_ebeln
Start of insert by B.Elan on 10/02/2006
 READ TABLE ITAB_PO_ITEM WITH KEY BELNR = ITAB_FINAL-BELNR
 EBELN = ITAB_FINAL-EBELN
 MATNR = ITAB_FINAL-MATNR.
 ITAB_PO_ITEM-EXCISE = ITAB_PO_ITEM-EXCISE + ITAB_FINAL-WRBTR.
End of insert by B.Elan on 10/02/2006
Start of delete by B.Elan on 10/02/2006
 itab_po_item-excise = itab_final-wrbtr.
End of delete by B.Elan on 10/02/2006
 MODIFY ITAB_PO_ITEM TRANSPORTING EXCISE
 WHERE BELNR EQ ITAB_FINAL-BELNR AND
 EBELN EQ ITAB_FINAL-EBELN.
 CLEAR ITAB_PO_ITEM.
 ELSE.
 COLLECT ITAB_PO_OTHERS.
 ENDIF.
 CLEAR ITAB_PO_OTHERS.
 ENDIF.
ENDLOOP.
sateesh
SORT ITAB_PO_ITEM BY BELNR EBELN.
LOOP AT ITAB_PO_ITEM.
 AT NEW BELNR.
 AT NEW EBELN.
 READ TABLE ITAB_PO_ITEM INDEX SY-TABIX.
 ITAB_PO_ITEM-FLAG = 'X'.
 MODIFY ITAB_PO_ITEM INDEX SY-TABIX.
 ENDAT.
 ENDAT.
ENDLOOP.
LOOP AT ITAB_PO_ITEM.
 ITAB_PO_ITEM-EXCISE = 0.
 MODIFY ITAB_PO_ITEM TRANSPORTING EXCISE
 WHERE EXCISE > 0
 AND FLAG = SPACE.
ENDLOOP.
end
LOOP AT ITAB_PO_ITEM.
 ITAB_PO-EBELN = ITAB_PO_ITEM-EBELN.
 ITAB_PO-EBELP = ITAB_PO_ITEM-EBELP.
 APPEND ITAB_PO.
 CLEAR ITAB_PO.
ENDLOOP.
LOOP AT ITAB_PO_OTHERS.
 ITAB_PO-EBELN = ITAB_PO_OTHERS-EBELN.
 ITAB_PO-EBELP = ITAB_PO_OTHERS-EBELP.
 APPEND ITAB_PO.
 CLEAR ITAB_PO.
ENDLOOP.
SORT ITAB_PO.
DELETE ADJACENT DUPLICATES FROM ITAB_PO COMPARING ALL FIELDS.
SELECT EKPO~EBELN
 EBELP
 MENGE
 BRTWR
 KZWI5
 EKKO~KNUMV
 EKPO~MATNR
 EKPO~TXZ01
 INTO TABLE ITAB_RATE_MODVAT
 FROM EKPO INNER JOIN EKKO
 ON EKPO~EBELN = EKKO~EBELN
 FOR ALL ENTRIES IN ITAB_PO WHERE
 EKPO~EBELN = ITAB_PO-EBELN AND
 EBELP = ITAB_PO-EBELP.
SELECT KNUMV KPOSN STUNR ZAEHK KSCHL KWERT
 INTO TABLE ITAB_KONV
 FROM KONV
 FOR ALL ENTRIES IN ITAB_RATE_MODVAT
 WHERE KNUMV = ITAB_RATE_MODVAT-KNUMV AND
KSCHL IN ('YT02', 'YF07', 'YOTH', 'YPF1', 'YD01', 'YD02', 'YD03' ) .
SORT ITAB_KONV BY KNUMV KSCHL.
SORT ITAB BY BELNR.
SORT ITAB_RATE_MODVAT BY EBELN EBELP.
SORT ITAB_PO_OTHERS BY BELNR MATNR.
LOOP AT ITAB_PO_ITEM.
 ITAB_DISPLAY-BELNR = ITAB_PO_ITEM-BELNR.
 READ TABLE ITAB_DOC WITH KEY BELNR = ITAB_PO_ITEM-BELNR BINARY
 SEARCH.
 IF SY-SUBRC EQ 0.
 ITAB_DISPLAY-BLART = ITAB_DOC-BLART.
 ENDIF.
 READ TABLE ITAB WITH KEY BELNR = ITAB_PO_ITEM-BELNR BINARY SEARCH.
 IF SY-SUBRC EQ 0.
 ITAB_DISPLAY-XBLNR = ITAB-XBLNR.
 ITAB_PO_ITEM-XBLNR = ITAB-XBLNR.
 ITAB_DISPLAY-NAME1_VENDOR = ITAB-NAME1_VENDOR.
 ITAB_DISPLAY-HKONT = ITAB-HKONT.
 ITAB_DISPLAY-MWSKZ = ITAB-MWSKZ.
 ITAB_DISPLAY-BUDAT = ITAB-BUDAT.
 ITAB_DISPLAY-DUE_DATE = ITAB-DUE_DATE.
 ITAB_DISPLAY-PON = ITAB_PO_ITEM-EBELN.
 ENDIF.
 ITAB_DISPLAY-QTY = ITAB_PO_ITEM-MENGE.
 READ TABLE ITAB_RATE_MODVAT WITH KEY EBELN = ITAB_PO_ITEM-EBELN
 EBELP = ITAB_PO_ITEM-EBELP
 BINARY SEARCH.
 IF SY-SUBRC EQ 0.
 ITAB_DISPLAY-PON = ITAB_PO_ITEM-EBELN.
 ITAB_DISPLAY-MATNR = ITAB_RATE_MODVAT-MATNR.
 ITAB_DISPLAY-MAKTX = ITAB_RATE_MODVAT-TXZ01.
 ITAB_DISPLAY-RATE = ITAB_RATE_MODVAT-BRTWR /
 ITAB_RATE_MODVAT-MENGE.
 ITAB_DISPLAY-PROD-AMT = ITAB_DISPLAY-RATE * ITAB_PO_ITEM-MENGE.
 IF ITAB_PO_ITEM-EXCISE NE 0.
 ITAB_DISPLAY-EXCISE = ITAB_PO_ITEM-EXCISE.
 ELSE.
*ITAB_DISPLAY-EXCISE = ( ITAB_PO_ITEM-MENGE * ITAB_RATE_MODVAT-KZWI5 ) /
 ITAB_RATE_MODVAT-MENGE.
*commentedon 210102 to get excise directly from BSEG - IV
 ENDIF.
 ENDIF.
 READ TABLE ITAB_KONV WITH KEY KNUMV = ITAB_RATE_MODVAT-KNUMV
 KPOSN = ITAB_RATE_MODVAT-EBELP
 KSCHL = 'YT02' .
 IF SY-SUBRC EQ 0.
 ITAB_DISPLAY-SALES = ( ITAB_PO_ITEM-MENGE * ITAB_KONV-KWERT ) /
 ITAB_RATE_MODVAT-MENGE.
 READ TABLE ITAB_FINAL WITH KEY BELNR = ITAB_PO_ITEM-BELNR
 BUZID = 'M'
 SGTXT(9) = 'SALES TAX'.
 IF SY-SUBRC EQ 0.
 IF ITAB_FINAL-SGTXT(9) EQ 'SALES TAX'
 OR ITAB_FINAL-SGTXT(9) EQ 'sales tax'.
 ITAB_DISPLAY-SALES = ITAB_DISPLAY-SALES + ITAB_FINAL-WRBTR.
 ENDIF.
 ENDIF.
 ENDIF.
 READ TABLE ITAB_KONV WITH KEY KNUMV = ITAB_RATE_MODVAT-KNUMV
 KPOSN = ITAB_RATE_MODVAT-EBELP
 KSCHL = 'YF07'.
 IF SY-SUBRC EQ 0.
 ITAB_DISPLAY-FREIGHT = ( ITAB_PO_ITEM-MENGE * ITAB_KONV-KWERT ) /
 ITAB_RATE_MODVAT-MENGE.
 ENDIF.
 READ TABLE ITAB_KONV WITH KEY KNUMV = ITAB_RATE_MODVAT-KNUMV
 KPOSN = ITAB_RATE_MODVAT-EBELP
 KSCHL = 'YD01' .
 IF SY-SUBRC EQ 0.
 ITAB_DISPLAY-DISCOUNT = ( ITAB_PO_ITEM-MENGE * ITAB_KONV-KWERT ) /
 ITAB_RATE_MODVAT-MENGE.
 ELSE.
 READ TABLE ITAB_KONV WITH KEY KNUMV = ITAB_RATE_MODVAT-KNUMV
 KPOSN = ITAB_RATE_MODVAT-EBELP
 KSCHL = 'YD02' .
 IF SY-SUBRC EQ 0.
 ITAB_DISPLAY-DISCOUNT = ( ITAB_PO_ITEM-MENGE * ITAB_KONV-KWERT )
ITAB_RATE_MODVAT-MENGE.
 ELSE.
 READ TABLE ITAB_KONV WITH KEY KNUMV = ITAB_RATE_MODVAT-KNUMV
 KPOSN = ITAB_RATE_MODVAT-EBELP
 KSCHL = 'YD03' .
 IF SY-SUBRC EQ 0.
 ITAB_DISPLAY-DISCOUNT = ( ITAB_PO_ITEM-MENGE * ITAB_KONV-KWERT
ITAB_RATE_MODVAT-MENGE.
 ENDIF.
 ENDIF.
 ENDIF.
 LOOP AT ITAB_KONV WHERE KNUMV = ITAB_RATE_MODVAT-KNUMV AND KPOSN =
 ITAB_RATE_MODVAT-EBELP AND
 ( KSCHL = 'YPF1' OR KSCHL = 'YOTH' ) .
 ITAB_KONV-KWERT = ( ITAB_PO_ITEM-MENGE * ITAB_KONV-KWERT ) /
 ITAB_RATE_MODVAT-MENGE.
 ITAB_DISPLAY-OTHERS = ITAB_DISPLAY-OTHERS + ITAB_KONV-KWERT.
 ENDLOOP.
 READ TABLE ITAB_PO_OTHERS WITH KEY BELNR = ITAB_PO_ITEM-BELNR.
 EBELN = ITAB_PO_ITEM-EBELN.
 BINARY SEARCH.
sateesh as on 10092003
 IF SY-SUBRC NE 0. CLEAR ITAB_PO_OTHERS. ENDIF.
end
 IF NOT ITAB_PO_OTHERS-EBELN IS INITIAL.
 READ TABLE ITAB_PO_OTHERS WITH KEY EBELN = ITAB_PO_ITEM-EBELN
 EB

Missing parameter values message when exporting report

Post Author: Gr_Pr
CA Forum: .NET
Using .NET 2005, CR XI R2, and the Crystal SDK for .NET 2005 to generate reports. Basically CR is my application's reporting tool. So, we create a report in CR XI R2, then distribute that report to our users loading it into the .NET application using the Report Document class.
We have a small problem.
Our user's have the ability to use pre-defined 'prompts' that will pass parameters to the reports. Let's say that the prompt will pass in (5) pre-defined parameter values, but the customer wants to run their own 'custom' report using our prompt, but their 'custom' report contains (6) parameters.
If I let the Report Viewer load the report, the user will be prompted for the missing parameter value that was not supplied by the 'prompt'.
If I run the report without loading it into the Viewer and try to export the report directly to PDF I receive an error message from CR stating I have 'Missing Parameter Values' then the report errors out.
Has anyone come across this? Is there something I missed?
I am not real sure as to why you would be prompted by the Viewer and not by the Export Class. This worked fine when using the RDC component, I was prompted for the missing parameter value by both options.
Any help would be greatly appreciated.

Hi,
The report has it's own ADO Datasource set in crystal reports, so I just pass the log on information to the report object before doing anything else.
this.DataSourceConnections[0].SetConnection("ServerName", "Database", "sa", "Password");
I then do a refresh before applying the parameter values (I do this because the user can preview the report more than one time by using a preview button on the parameter form without re-loading the report object)
this.Refresh();
Then I set all parameter values followed by setting the recordselection formula.

Using Jsp to create a crystal report

Hi,
I am using Jsp to create a crystal report from an oracle database.To create a new report document,i am using the ReportClientDocument class in the
"com.crystaldecisions.sdk.occa.report.application.ReportClientDocument " package.
I am using this code:
 ReportClientDocument rpt=new ReportClientDocument ();
 rpt.newDocument();The report application server running on my machine does not support this.
I have to use an IReportAppFactory interface method which is part of the package com.crystaldecisions.sdk.occa.managedreports.*,, in order to create a new report document.Can anbody help be know how to use this interface in a Jsp??
Any help would be appreciated.
Thanks,

Hi Tim, For security reasons we do not save the database password with the report. There are a few ways to solve what you are trying to do:<ol><li>Use the Create Viewer JSP page wizard to auto-generate the code. You will need to use the API option and select the option to "Log on to existing data connections" as well as the option to "Connect the CrystalReportPageViewer" (Note: I suspect that the reason you had a blank page the first time you tried this is because you did not have an Output option selected) The code that is generated will provide you with the ability to pass in the database authentication and then launch the report in the viewer. </li><li>The other option is to use a JNDI Connection at runtime. If you setup a JNDI Data Source you should have the ability to store the database authentication with the Data Source. To have the report use a JNDI connection at runtime you will need to set the name of the JNDI Data Source using the Properties View of the database in the Report Designer.</li></ol>Anyway, give this a shot and let me know how you make out.Regards, Sean Johnson (CR4E Product Manager) <a href="http://www.eclipseplugincentral.com/Web_Links-index-req-ratelink-lid-639.html">Rate this plugin @ Eclipse Plugin Central</a>

Not able to set properties for Exported documents

I am pretty new to crystal report, my problem is I export reports into pdf, excel, rtf and doc.
While exporting I want to set document Properties I am using SummaryInfo to fill in the values
SelectedRepDoc.ReportOptions.EnableSaveSummariesWithReport = True
SelectedRepDoc.ReportOptions.EnableSavePreviewPicture = True
SelectedRepDoc.SummaryInfo.ReportAuthor = "TEST"
While debugging I see the values getting set but after export when I open the document and see properties of it its not set.
Also I have to set these values at runtime only because author name can be different based on my application logic.

hi
summary info in crystal reports is for .rpt types.. it will be useful for placing the special fields report title author inside the report.
VMSSanthosh M.sc.,CGT.,MCP.,

Using Parameter Form after migration from 6i to 11g

Hello,
I have a migration to do in order to use Reports 11g.
But some of the RDF I have to convert use a parameter form at runtime for some of the parameters.
How can I have the same functionality when calling these reports from my Forms application ?

Hi,
take a look to the following Support Note.
reference
Using Reports parameter forms with RUN_REPORT_OBJECT on the web (Doc ID 139546.1)
Thanks

Report Document not show on Crystal Report Viewer in C#

My program is modified from VB.NET. Now I struck with Crystal Report that Crystal Report Viewer didn't show Report Document.
Printing code is composed of two forms. One assign parameters and objects need. Other is Crystal Report Viewer form, CrystalReportForm. Last one run report by parameter from the first.
When run this code that it didn't found any error but the problem is no report show on Crystal Report Viewer on second form. It just blank Crystal Report Viewer. There arm't any message response.
Here is my code.
// report caller form.
private void Print()
 CrystalReportForm rptForm = new CrystalReportForm();
 string[] strtbl;
strtbl = new string[1];
 string[] strqry;
strqry = new string[1];
 // prepare var
 string myqry;
 string myrpt;
 // Pass The Table That you used in the crystal Report
strtbl[0] = "r_receipts";
 // Pass the Query
myqry = "SELECT * FROM r_receipts";
myrpt = "rptReceipts.rpt";
strqry[0] = myqry;
 //Pass For Mdi True
rptForm.MdiParent = this.ParentForm;
rptForm.ViewReport(myrpt, strtbl, strqry, "");
 //Parameter Value It is Optional
rptForm.Show();
// Crytal Report Viewer form.
public void ViewReport(string ReportName , string[] TableName, string[] QueryString , string Parameter = "")
 //Me.MdiParent = mainpage;
 if (TableName.Length != QueryString.Length )
 MessageBox.Show("Passed Variable Are Not Correct", "Message", MessageBoxButtons.OK, MessageBoxIcon.Information);
 return;
 CrystalDecisions.CrystalReports.Engine.ReportDocument rpt = new CrystalDecisions.CrystalReports.Engine.ReportDocument();
 CrystalDecisions.Windows.Forms.CrystalReportViewer crv = new CrystalDecisions.Windows.Forms.CrystalReportViewer();
crv.ActiveViewIndex = 0;
crv.BorderStyle = System.Windows.Forms.BorderStyle.FixedSingle;
crv.ToolPanelView = CrystalDecisions.Windows.Forms.ToolPanelViewType.None;
crv.Dock = System.Windows.Forms.DockStyle.Fill;
crv.Location = new System.Drawing.Point(0, 0);
crv.Name = "CrystalReportViewer";
 MySqlDataAdapter at =new MySqlDataAdapter();
 DataSet ds = new DataSet();
 for (int i = 0; i < TableName.Length; i++)
at = GetDataAdeptor(QueryString[i]);
at.Fill(ds, TableName[i]);
 string rptPath = "";
rptPath = Application.StartupPath + "\\" + ReportName;
rpt.Load(rptPath);
rpt.SetDataSource(ds);
 if (Parameter != "")
rpt.SetParameterValue(0, Parameter);
crv.ReportSource = rpt;
crv.Refresh();
 //CrystalReportViewer.DataBind();
 //Me.Panel1.Controls.Add(CrystalReportViewer);
 Panel panel1 = new Panel();
panel1.Controls.Add(crv);

Hi Bhushan,
It's not yet fixed. My dataset (ds) can't bine to DataGridView as
DataGridView1.DataSource = ds
But it could do like this
DataGridView1.DataSource = ds.Tables[0];
When I bine to Crystal Report Viewer setdatasource
CrystalReportViewer1.setdatasource = ds.Tables[0];
It still not work, anyway you suggest let me in the right way. I very confuse the thing I fix to bine to DataGridView
Thank,
Chaiwat

Use parameter to set runtime xlsx report document

Similar Messages

Maybe you are looking for