Use PC internet via USB cable on n97mini

How can I use PC internet on my s60v5 device, this was possible on s60v2 by using custom COM ports and a software. Is it possible to achieve this on s60v5?

Ok.. Reverse tethering over USB .
May want to check your Windows sharing options/settings and the network adaptors settings
Also make sure all the drivers are properly installed and USB debugging in turned on.
The issue is Windows related. Maybe this VIDEO will help .
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"!
Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Similar Messages

Internet via USB Cable for the Touch ? !

Hey
is it possible to online trough the USB cable of the Ipod Touch ?
I allready read something about it and many persons said its impossible ?!
But this cant be so hard or ?
Apple would make me very happy if you could use the USB cable for Internet by the next firmware update =)
So . . . if someone knows a way for now =) pls tell me
Well . . . im sorry for all my language mistakes here . . . im from Germany ^^
Greetz NaToll ^^

You have heard of 'Tethering' witch is only available on the iPhone but not in the US (thank you AT&T). That is only for using the iPhone to connect a computer to the internet. Sorry

E6 cant connect to internet via usb cable

Hello,
My phone is Nokia E6. I've installed Nokia Suite (v: 3.6.36) on my pc.
I connect usb cable to E6 and pc. Run Nokia Suite. And then I connect my pc to internet. I expect E6 will connect too but it's just not working.
Can you help me on this?
Solved!
Go to Solution.

@rebulanyum
Have you tried both via Bluetooth and USB connectivity as per this resource?http://www.nokia.com/hk-en/support/product/e6-00/troubleshooting/?qt=Modem&comp=nokiatroubleshooting...
Happy to have helped forum with a Support Ratio = 42.5

If my phone is lost with 'Find my iPhone' activated, will it notify me if they connect the phone to the internet (via usb cable to charge/try to use itunes/etc) in a place where 3G/signal is unavailable?

Dropped my phone and returned to the area 10 minutes later and it is gone.
Problem is that there is a lot of dead area around here. I was wondering if they connected the phone to a laptop or PC connected to the internet with the intent to charge it or get into itunes(in an area with dead signal), will find my iphone notify me?
Thank you in advance...stressing very much about my phone. It is my work phone.

Only way to be able to locate your iphone is if it is turned on. Just a note.

Internet Sharing via USB cable

I have a nokia lumia 720. I want to connect internet to my pc through my Phone via usb cable.
how can i connect internet via usb cable to my pc. My pc has no wifi connectivity.
Solved!
Go to Solution.

This feature is not currently available but you can certainly suggest it to Microsoft using the link below.
http://windowsphone.uservoice.com/forums/101801-feature-suggestions

Surfing web via usb cable in 6120c

can we surf web using nokia 6120c via usb cable connected to a pc
my blog on the net(in arabic):http://bazkurd.wordpress.com

You can do it via an application called Gnubox.
It's works via Bluetooth.
Google it if you have a bluetooth dongle.
Nokia N95
V 20.0.015
0546553

WHEN I USED TO CONNECT INTERNET FROM MY IPHONE 4S PERSONAL HOTSPOT VIA USB, AN ICON IN THE NETWORK PREFERENCE NAMED "IPHONE" GETS OPENED.... BUT NOW THIS IS NOT HAPPENING AND I AM NOT ABLE TO CONNECCT PERSONAL HOTSPOT VIA USB CABLE. PLEASE HELP ME OUT

WHEN I USED TO CONNECT INTERNET FROM MY IPHONE 4S PERSONAL HOTSPOT VIA USB, AN ICON IN THE NETWORK PREFERENCE NAMED "IPHONE" APPEARS.... BUT NOW THIS IS NOT HAPPENING AND I AM NOT ABLE TO CONNECT PERSONAL HOTSPOT VIA USB CABLE. PLEASE HELP ME OUT???

Please don't shout! Using all uppercase means shouting on the internet. If your keyboard is stuck please say so, otherwise people will think you are being obnoxious.
Now the first question is, when you are saying connecting to personal hotspot, have you always been using the iPhone to connect to the internet? Are you someplace where the only place to connect is available via tethering to the iPhone's celluar network? Or do you have other options?

IPhone contacts: file transfer to Windows 7 via USB-cable My iPhone can communicate with the computer only via USB-cable (no mobile data, no bluetooth, no internet, no outlook). As I want to get the phone to the "doctor" I want to save specifically

iPhone contacts: file transfer to Windows 7 via USB-cable
My iPhone can communicate with the computer only via USB-cable (no mobile data, no bluetooth, no internet, no outlook). As I want to get the phone to the "doctor" I want to save specifically my contact data and calendar details on the computer (OS: Windows 7). How can I solve this task? I will appreciate your valuable information, thanks.

Using the iPhone, the USB cable, iTunes and Windows Contacts, sync the iPhone contacts to Windows Contacts. That will save them there. They are also included in the iPhone backup made in iTunes, and if you use iCloud.
I'm sorry, I missed the calendar part the first time I looked. For calendar, you need a supported application on the computer (Outlook) or if you use iCloud, you can use the iCloud contacts and calendar app to sync.

How do I use my iphone 4S wifi on my laptop via USB cable

Hi with my HTC when I connected it to my laptop via USB cable a list of options came up on my phones screen and one of them was to tethering. But when I do the same with my iPhone no options come up on my screen, so how do I use my iPhones wifi on on my laptop useing a USB cable?
Any help would be gratefully appreciated.
My laptop runs on windows vista and my iPhone 4s has the latest updates.

I want to use my home wifi signal to tether my iPhone to my laptop via USB ,as my laptops wifi card is broken. It worked ok with my old HTC desire as when I can extend it to my laptop it had a list os options of what you wanted to do and one of them was tethering, as I'm useing my home wifi I don't need to worry about my data usage. But thank you for responding.

My Seagate external 250GB hard drive ejects improperly without command. I am trying to use Time Machine to backup my macbook via usb cable... I keep getting the message that the disked ejected improperly... Any solutions...

My Seagate external 250GB hard drive ejects improperly without command. I am trying to use Time Machine to backup my macbook via usb cable... I keep getting the message that the disked ejected improperly... Any solutions...

You are not alone. Thousands have this problem, on various models of Macs. Short answer, it has something to do with the disk going to sleep (possibly?). You can't do anything about it and Apple won't address the problem. Maybe you should buy a time capsule. Just keep giving them money and use their proprietary equipment.
For a more complete answer, see this thread (all 65+ pages of it with NO SOLUTION IN SIGHT... except for some 3rd party solutions that sometimes work, sometimes don't): Disk Drive ejecting itself

Macbook Pro suddenly will not connect to the internet via ethernet cable.

I know this is a long shot... but I figured I would give it a try.
My macbook pro suddenly does not connect to the internet via ethernet cable. Please bear with me, as I am not very tech-savvy - I will try my best to describe the symptoms!
I connect to the internet via ethernet (we don't have wifi). It was working before I went to work, and when I came home I suddenly couldn't get anything to work (I know everyone says this, but I truly didn't mess with anything). Internet browsers just think for awhile and then turn up the 'You are not connected to the internet' error.
I went into my network preferences and curiously, the 'Ethernet' shows a green dot and says 'connected'. However it says 'Authentication server is not responding' underneath the last part that says '802.1X: WPA: eduroam' (I think that is my user profile).
When I go into my 'security' settings I can see that my firewall is off, so that shouldn't be causing any problems.
I've tried restarting the router and computer itself many times. Diagnostics just gets to a certain point and reports back 'Network Diagnostics cannot fix the current networking problems.' I've also tried switching to a different ethernet cable, and I tried both cables out on a PC laptop and it connected without issue. Additionally, I brought my macbook along to a friend's house and it connected to his wifi just fine, so the problem appears to just be with ethernet connections.
I know it's hard to troubleshoot this kind of thing without being there and having a look at the computer yourself, but any tips wouild be greatly appreciated.

As I mentioned above, I am not very tech savvy so I have no idea why a wireless protocol would be showing up there, I'm just listing everything I see in hopes that someone might know something I can try. This is why I am asking for help here - I'm not sure what has happened that has made me unable to connect, especially since it seemingly occured while nobody was using the computer.
I guess I should clarify that I'm not a total hillbilly- normally my firewall is set to 'on', but I set it to 'off' to try and troubleshoot the issues here as I was told that sometimes it can interfere with the computer's ability to connect to the internet. If this is not the case and firewall does not affect anything, I will turn it back on while I try to fix this.
I have tried the method you mentioned above a few times - I actually contacted my ISP earlier this week and they recommended resetting the router like that. They didn't mention any known network issues.

N95 crashes in Data transfer via USB cable, help?

I ve been using my N95 with no problems for more than a year. Sometime ago I bought a new 8Gb Micro SDHC memory card, it was recognised by the phone and worked perfectly. But after the card was stored with data for more than 1gb, the phone crashes everytime I try to copy even the smallest file on the memory card through Data transfer mode via USB cable. Than I try to copy a file an error message is displayed in Windows XP and the phone reboots. The strangest thing that I can copy without a problem even a 500 mb movie file to the phone if the stored space on the memory card is say like 985mb, but after that it will crash even with the copying a 10 kb text file.
Any help would be appreciated.

No, its not the file system or Memory card itself - cause transfering a data through a card reader works fine and the phone recognize correctly everything transfered. Can it be the case of USB cable driver? May be I need to install it or go for a newer version? BTW, I removed Nokia PC Suite from my notebook - cause I dont used it much, but this program still used a lot of my PC resources without asking to. I belive that PC Suite is not nesessary for using the phone through a Data Transfer mode?

I have a Canon LBP5360 laser printer connected via USB cable to my MacPro running 10.6.8 I have downloaded the latest UFR2 divers. I am trying to connect to the printer but the printer is not showing appearing in Print

I have a Canon LBP5360 laser printer connected via USB cable to my MacPro running 10.6.8
I have downloaded the latest UFR II driver. (UK Version)
I am trying to connect to the printer but the printer is not appearing in my Print/Fax Preferences.
When I click the box "More Printers" under the Default printer the drop down box gives me a heading "Canon IPv6 (UFRII) with the option to add or cancel. (The add is highlighted). But there are no printers showing in the box. Nothing. Can anyone help?
Is there a problem with my Mac setup or maybe a setting in my printer?

Mac UFR II Printmonitor
UFR II Printmonitor is application software that interfaces with the software for the printer, and is installed with the printer driver. You can start UFR II Printmonitor in the following folder to check the printer status, and errors. Refer to the Help how to use the Print Monitor.
MF3010, MF8000 Series, MF8000C Series, MF8300 Series, MF8300C Series:
Print Monitor: [Library] - [Printers] - [Canon] - [CUPSCMFP] - [Utilities]
Other Printers:
Print Monitor: [Library] - [Printers] - [Canon] - [UFR2] - [Utilities]

Media transfer mode via usb cable not working

Hi. Can someone please help me. Whenever i connect my phone via usb cable, the media transfer mode is not working. Only the mass storage mode works. Im not sure what happened. Please!! It'll be a big help. I need the computer read my device. Suddenly it wasnt able to detect it. The usb cord in using are all good.

To solve the issue, open Device Manager on your computer to reinstall the driver for your device while your device is connected with your PC via a USB cable.
Microsoft Windows Vista and 7 users
To open Device manager on your computer
Click on the Start button.
In the Search box, type device manager, and then press enter.
Microsoft Windows 8 users
To open Device manager on your computer
Click the Desktop Tile to open the Desktop.
Click >> at the bottom right of the taskbar.
Select Control Panel from the Menu.
Select Device Manager from the list of control panel items.
Note: If you do not see the screen with the Device Manager option, click the View by drop-down menu and select Small icons.
Microsoft Windows XP and 2000 users
To open Device manager on your computer
On the desktop, right-click on My Computer and click Properties.
In the System Properties window, click the Hardware tab.
In the Hardware, tab click the Device Manager button.
To reinstall the drivers for your device
Scroll down to the Universal Serial Bus controllers (USB section) of the Device Manager window.
Look for an MTP Device: Media Device, Unknown Device or any other reference to your phone. Click on this entry and choose "Uninstall" whilst leaving the device connected.
Wait a few minutes, and the computer will reinstall the drivers for the device.
Now, the phone is accessible via Computer/My Computer on your computer.
What are your thoughts about this forum? Let us know by doing this short survey.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

E65 won't connect via USB Cable

Hello to you all...
I just got my new Nokia E65 and I couldn't be happier with it. Fantastic phone.
However I can't connect it to my PC (Windows XP SP2) via the USB Cable...it just won't recognize it. I installed PC Suite with the latest cable drivers and nothing happens. When I connect the cable to the phone it asks if I want to use "data transfer" or "pc Suite" mode, but neither of them work.
I'm able to connect to PC Suite via infrared, and that works fine. But I want to update my firmware and software updater only works via usb cable.
Any ideas on what to to?

more info needed, suite version, cable type, what is visible in pc device manager when you connect phone, what is visible in phone screen when you connct cable, etc.

Use PC internet via USB cable on n97mini

Similar Messages

Maybe you are looking for