Use PC Ram in Macbook Pro(mid 2012)

Hello there -
I'm in the process of upgrade my Macbook Pro to something that is going to allow me to use Photoshop/Final Cup without it running super slow. In fact, my mac runs slow on just about anything!
Down to business, I built a decent gaming PC last year and wondered if I can use the Kingston 8GB (2x4GB) DDR3 1066Mhz 1.5V to replace to 4GB I currently have.
Would this be compatible? I know I could go out and buy some more ram, but thought what's point if I have some sitting there doing nothing.
Any help would be really appreciated.
Cheers

It will help us diagnose your problem to know the exact model, size, year built, RAM installed and OS you're running.
In general bump the RAM to 8 GB and most important, install an SSD. I've done 5 so far all from OWC:
https://www.macsales.com/
Very fast now and a total no brainer to install!
Photoshop CS6 opens in 3.4 seconds, render time is in seconds.
Check out the benchmarks:
http://eshop.macsales.com/shop/apple/memory/Mac_Memory_Upgrade_Performance_Testi ng

Similar Messages

Adding more RAM to Macbook Pro mid-2012

Hi!
I have a question about adding more RAM to my mid-2012 MacBook Pro (without Retina). I've been doing some video editing with Final Cut, and I'm using quite many apps on the daily basis. I have the standard configuration with 4GB of RAM (2x 2GB) but I guess I should upgrade it, shouldn't I?
I had that idea in mind: buying extra 8GB RAM instead of one 2GB, so I'll end up with 10GB of RAM. If it won't be enough and I'll have some extra money, I will add another 8GB instead of 2GB, so I'll have 16GB.
First question - is it worth it?
Second question - can I add any RAMs supported by Macs? For example I'll leave one 2GB that I have already, and add 8GB made by, let's say, Kingston (I guess they are supported and they have good price in my country). Will this work fine? Does it make sense?

Jerroslaw,
since you’re running Mavericks, open up Activity Monitor while you’ve got your usual selection of apps running, select its Memory tab, and look at the Swap Used setting in the lower left. If it’s displaying “0 bytes” as the amount of swap used, then extra RAM won’t make a difference. Otherwise, to answer your first question, whether it’s worth it or not depends upon how frustrated you are running your usual selection of apps with 4 GB of RAM. It might be that the cost of replacement RAM modules outweighs your level of frustration — only you can make that determination of worth. I would recommend that if you do choose to purchase replacement RAM, that you get a pair of matching modules — either 2 × 4 GB = 8 GB, or 2 × 8 GB = 16 GB, to replace the pair that is currently installed.
For your second question, you don’t have to use Apple-brand RAM, but you do have to use RAM with the same characteristics as your factory-installed RAM uses. Any worthwhile purveyor of RAM for Macs will let you easily locate modules that are compatible with your Mid 2012 MacBook Pro.

Re: Adding more RAM to Macbook Pro mid-2012

Hi,
I am in the same situation as Jerroslaw, but in my case my "swap" says "0 bytes". what would be the best idea to increase my RAM?
sorry for my lack of knowledge in this area..

Ah! You're running CAD software! Yes, you could surely benefit with a RAM upgrade. To me, 8GB of RAM is the 'sweet spot' for RAM on any Mac - you can upgrade the RAM to either 8GB or 16GB (the maximum).
Around here we tend to recommend Crucial and OWC RAM - it simply works with no problems with MacBook Pros where cheaper, 'value' RAM has trouble more likely than not. Visit the Crucial website and click on the System Scanner tab and download the small app. Unzip and run it and you'll be taken to the Crucial site with the exact upgrade options for your particular model. The exact specification for your machine are 204-pin PC-10600 (1333 MHz) DDR3 SO-DIMMs. You can also check OWC - I just prefer Crucial because it's usually less expensive than OWC and it's what I run in my machine.
Visit both sites and check out their offerings...
Clinton

AirDrop doesn'n work between Macbook Pro Mid 2012 and Mac Book Air mid 2013 using both Yosemite

Can't search other devices using AirDrop between between Macbook Pro Mid 2012 and Mac Book Air mid 2013 using both Yosemite...
And trying with MBP late 2011 can't connect either

Hey aniMix,
Thanks for the question. I understand that you are experiencing issues with AirDrop. The following resource provides some troubleshooting information which may be helpful:
Mac Basics: AirDrop lets you send files from your Mac to nearby Macs and iOS devices
http://support.apple.com/kb/HT6510
Thanks,
Matt M.

My Macbook pro Mid 2012 Model Seems to be using too much RAM

Hello everybody, I recenlty bought a Macbook pro Mid 2012 Model and I absolutely fell in love with it! I use it everyday for school, work, and for my musical hobby.
I haven't had a single problem with it until recently, and it seems like the RAM memory is being all used up without me even running programs. This problem barely started rougly 2-3 weeks ago and it's becoming annoying. I do plan to upgrade the ram soon seeing as the extra RAM will help run my engineering software I'm going to be using.
Anywho I'm just looking for tips, suggestions or answers as to why this problem is occuring. Also heard from a fellow employee that Google Chrome can cause this problem with RAM and battery life as well.

Stop using Chrome for any number of reasons and stick to Safari. An aspect of OS X memory management is to take over as much memory as possible in order to better manage the memory, however, this does not mean you are running out of memory. You only run out of memory when you try to run too many applications concurrently given the amount of RAM you have. You will know when that happens because the computer will slow down, you will see the beachball a lot, everything you do takes forever, and the hard drive will be grinding away.
About OS X Memory Management and Usage
Using Activity Monitor to read System Memory & determine how much RAM is used
OS X Mavericks- About Activity Monitor
Understanding top output in the Terminal
The amount of available RAM for applications is the sum of Free RAM and Inactive RAM. This will change as applications are opened and closed or change from active to inactive status. The Swap figure represents an estimate of the total amount of swap space required for VM if used, but does not necessarily indicate the actual size of the existing swap file. If you are really in need of more RAM that would be indicated by how frequently the system uses VM. If you open the Terminal and run the top command at the prompt you will find information reported on Pageins () and Pageouts (). Pageouts () is the important figure. If the value in the parentheses is 0 (zero) then OS X is not making instantaneous use of VM which means you have adequate physical RAM for the system with the applications you have loaded. If the figure in parentheses is running positive and your hard drive is constantly being used (thrashing) then you need more physical RAM.
Adding RAM only makes it possible to run more programs concurrently. It doesn't speed up the computer nor make games run faster. What it can do is prevent the system from having to use disk-based VM when it runs out of RAM because you are trying to run too many applications concurrently or using applications that are extremely RAM dependent. It will improve the performance of applications that run mostly in RAM or when loading programs.

MacBook Pro mid 2012 15" - one RAM slot gone bad

Hi,
Has anyone ever had the issue with not working RAM slot? My MacBook Pro mid 2012 (non-retina) suddenly froze and after restart was beeping three times every few seconds. I found out that the beeping signals bad RAM. Bought new chips, and the problem still exists. My mac can now run on one slot with 4GB RAM.
I did check the placement of the chips in the slots, i also checked one slot at a time, and one of them has gone broken.
Any ideas on how to make it run again? or if it is possible to replace the slots?
Brgds
Marek
MacBook Pro 2,7GHz Intel Core i7 / OSX 10.9.4

The Apple-accepted cure for a dead RAM slot is a new logic board. Unless you ahve AppleCare, that will be an expensive fix.
An Apple service option is the "depot repair." Instead of working on your computer in the Apple Store, they send it to a centralized refurbishment facility where they fix anything they find wrong (except for cosmetic damage and damage from abuse like dropping) for a flat fee of a little over US$300. That is between 30 and 40 percent of the parts and labor charges if Apple installs a new board in an Apple Store. Sometimes they will install an new battery at the depot without increasing the flat fee.
The downside is that it takes about a week; for that level of cost savings, I could do without my computer for a week.
So take it to Apple and ask about a depot repair.
A low-tech and low-cost option is to expand on what you are doing now--using one slot. Although the official RAM limit on your model is 8GB RAM (two 4GB models), your model can actually handle a total of 16GB (two 8GB modules. You can ignore the dead slot and put an 8GB module in the good slot. My 2012 MBP has 8GB RAM and is completely happy running Mavericks.
Be sure to ONLY get the RAM from an Mac-savvy vendor. For over a decade I've bought all our Mac RAM from one supplier. This is their page for an 8GB module for your MBP model:
http://eshop.macsales.com/item/OWC/1600DDR3S8GB/
I would also trust Crucial on this one. For a change they recognize that your model can use more RAM than stated in Apple's outdated specs:
http://www.crucial.com/usa/en/compatible-upgrade-for/Apple/macbook-pro-%2813-inc h-and-15-inch%2C-mid-2012%29

MacBook late 2009 vs MacBook Pro Mid 2012 (Ram)

Hi, I recently upgraded the Ram in my MacBook Pro (Mid 2012) to 16gb 1600 MHz DDR3 and my wife's MacBook (late 2009) has 2gb 1067 MHz DDR3 currently in it, but I tried using my old Ram (2gb slots) from the Mid 2012 MacBook Pro, and her MacBook wouldn't boot up at all, I just got a black screen.
So I see the difference is the 1600 MHz vs the 1067 MHz, so does that mean that my old Ram won't work because of this?
Thanks in advance,
DJ Meezy

Meezy81 wrote:
So I see the difference is the 1600 MHz vs the 1067 MHz, so does that mean that my old Ram won't work because of this?
yes, that is why.

How can connect my macbook pro mid 2012 to my imac 21.5 inch mid 2010 ?? I want to use imac like a display for macbook.

How can connect my macbook pro mid 2012 to my imac 21.5 inch mid 2010 ?? I want to use imac like a display for macbook.

Target Display Mode: Frequently Asked Questions (FAQ)
with a mini display to mini display cable. Attach it to the Thunderbolt port on your MBP and to the mini display port on your iMac.
How do I enable TDM?
Make sure both computers are turned on and awake.
Connect a male-to-male Mini DisplayPort or ThunderBolt cable to each computer.
Press Command-F2 on the keyboard of the iMac being used as a display to enable TDM.
Note: In Keyboard System Preferences, if the checkbox is enabled for "Use all F1, F2, etc. keys as standard functions keys," the key combination changes to Command-Fn-F2.

Can I use my macbook pro mid 2012 as an external display using thunderbolt port

Hi,
I want to use my macbook pro (mid 2012) screen as an external display for a raspberry pi using a HDMI to Thunderbolt cable, via the thunderbolt port on the macbook pro. Would this be possible? Can the macbook pro's thunder bolt port act as an input and is any additional software required?
I look forward to hearing from you.
Thanks in advance!

Welcome to Apple Support Communities
You are referring to Target Display mode. Target Display mode can only be used in 27-inch iMacs and iMacs with Thunderbolt, not MacBooks Pro > http://support.apple.com/kb/PH11302
Unfortunately, you can't use the MacBook Pro as a display. It doesn't support the monitor mode

HT3986 Where can i download the driver for my network card? i have a macbook pro mid 2012, and are using windows 7 ultimate

Where can i download the driver for my network card? i have a macbook pro mid 2012, and are using windows 7 ultimate

uhm hey guys,
idk where else to get help so ima try here,
i got windows 8 installed with bootcamp on my macbook pro late 2010 (5, 5) and theres no sound coming out of it, so i installed an nvidia audio driver (idk, it could be the incorrect one) but i have nvidia GeForce 320 on my macbook.
do you know what i should install ?
but when i go onto my osx the sound is fine, so i figured im missing something on windows 8
Orrrr could i just go out and get parallels and hope it doesn't get the same problems?

Hey everybody. Do you know if i can run os x server on macbook pro mid 2012 with i5 2.5 GH, 4Gb RAM and OS X 10.8.4?

I recently saw that for os x server apple says that you can run it on inexpensive hardware like mac pro, imac and mac mini. It doesn't say anything about notebooks. So if i buy os x server will i be able to run it on my macbook pro mid 2012 with i5 2.5 GH, 4 Gb RAM and 10.8.4?
Thanks.

Welcome to Apple Support Communities
OS X Server is compatible with any Mac that runs OS X Mountain Lion, so you can install it on any MacBook, MacBook Pro, MacBook Air, iMac, Mac mini or Mac Pro that supports Mountain Lion > http://www.apple.com/osx/specs
Just open the App Store and purchase OS X Server. The app will appear after finishing the download, so follow its steps to set up OS X Server on your computer. You will be able to install it for free in all your computers after purchasing it. If you want more information about OS X Server, read > http://www.apple.com/osx/server/

Macbook pro mid 2012- Wanting to know how to install windows using bootcamp

Hello everyone,
     I'am sure this question has been asked many times but this is urgent and can't really find all the necessary steps I need in my situation. I am using a MacBook pro mid 2012 I believe. I'am taking colleges courses, and need to use visual basic. Unfortuanatly visual basic is not compatible with macs. I've done a few researchs and found out installing windows 7 with bootcamp is maybe the best solution? Probleme is I have no start up disk that came with the mac, and the cd drive is broken. I do have an external hard drive I bought a few months ago.
     What exactly do I need in order to set this up? Is it still possible without a start up disk, and by using a external hard drive? How should I get windows 7? Online or buy the disk?
     If someone could either direct me to a threaded explaining a similar case? Or point out what I need, and a few important steps to follow?
I appreciate it!
Thanks
LJ.C

if your MBP has a DVD drive (even if broken), it requires that to install windows via boot camp so you have 2 options
get your dvd drive repaired, or
see if the usb boot camp hack will work for you - http://forums.atomicmpc.com.au/index.php?showtopic=51873

My Macbook Pro (Mid-2012) won't connect to an external display using my MiniDP to VGA Cable.

I'm on a Macbook Pro (Mid-2012) on Mac OS X 10.8.3 (currently downloading the update to 8.4). When I plug in my Mini Displayport to VGA adapter to my Mac, the screen flickers blue for a second and the Display Settings window detects the other monitor and allows me to rearrange the screen, but it does not project anything onto the other monitor. However, I tried connecting an Apple Thunderbolt Monitor to this computer today, and it worked. This wasn't a problem before, as I was able to connect this Mac to other LCD projects before. Furthermore, I don't think it's an issue with the adapter either because it's relatively new. I also tried plugging in the adapter of another Mac (which was working fine) into my Mac, but it didn't work either.
Here's what I've tried:
1. Restarting the computer with everything plugged in
2. Pressing Command + F1 when it's plugged
Any advice would be helpful!

Hi lancekatigbak,
If you're having issues with the display out on your MacBook Pro, you may want to take a look at the troubleshooting steps in the following article:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Cheers,
- Brenden

Adata sp900 sdd 128-GB ssd, optibay optical drive to replace superdrive, and 16 GB upgrade for macbook pro mid 2012.

Hello everyone,
Thank you in advanced for all of the support. This is my first post to the communities. I just bought a 2.9 GHz core 17 processor MacBook pro mid 2012 13" with 8 GB of RAM and I am in the process of upgrading it. When I bought the MacBook pro originally, I was told that I would never mac out the performance because I do not do a lot of photo/video editing. This is true, but I am an academic researcher and tend to multitask often, having 20+ safari tabs open, SPSS (a statistical program), full screen mail app, full screen calendar app, and preview, iTunes open all at the same time. I often get slow performance and error messages that state low memory. This is why I am interested in upgrading the laptop. I am getting ready to go to medical school and I want to have a powerful laptop. I also want to future proof because I plan on having a dual boot system to mac OS and windows OS.
Because I know I will be maxing out the performance of the computer, I want to take full advantage of upgrades, especially now because the cost of the components is reasonable at the moment. The following are the proposed upgrades:
1. Upgrade my current 8-GB ram (2x4-GB) with 16-GB ram (2x8-GB). I plan on using crucial RAM.
Crucial 16-GB Ram: http://www.amazon.com/dp/B008LTBJFW/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&coli d=2B1KHELSPJPNN&coliid=IYGJWGQDH8LV0&psc=1
2. Replace my optical drive with a hard drive. I will place a SSD into my current hard drive position and then install my current HDD into the optical drive bay with the optibay optical drive caddy. I am doing this because I plan to use the SSD as the boot drive and my current HDD as my backup and files drive. I am putting the SDD into the HDD because I have read it is better to place it in this bay for performance. I will put the other HDD in the optical drive because the performance of that one will not be as important.
Adata SSD: http://www.amazon.com/dp/B008LTBJFW/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&coli d=2B1KHELSPJPNN&coliid=IYGJWGQDH8LV0&psc=1
Optibay Optical Drive Caddy: http://www.amazon.com/dp/B0058AH2US/ref=wl_it_dp_o_pd_nS_ttl?_encoding=UTF8&coli d=2B1KHELSPJPNN&coliid=I3GI8MGWAKXY79
My questions:
1. Is the listed RAM appropriate and sufficient for my MacBook pro?
2. Is the listed SSD appropriate and sufficient for my MacBook pro?
3. Is the listed Optical Drive Caddy appropriate and sufficient for my MacBook pro?
4. Is there still a firmware problem that does not allow for SATA 3 (6Gb/s) support in the optical drive?
5. Would it be easier to format the new SSD outside of the MacBook using a SATA to USB adapter?
6. Does working on any of the listed components void my AppleCare (I plan on keeping all of the original components so I can replace them, if I ever need to see apple support)?
7. What is the best way to put Mavericks onto the SSD to make this my boot drive?
8. What is the best way to make all of my files remain on the HDD, but link to the SSD with the operating system?
9. Has anyone ever successfully upgraded to 16-GB RAM and used their optical drive for a secondary hard drive?
10. Is there any miscellaneous advice for this project?
Please feel free to give partial answers. I know this was a lot of information, but I wanted to be efficient in my post. I am very appreciative of everyone who will contribute.
Thank you!

rmichaud91 wrote:
Hello everyone,
I just bought a 2.9 GHz core 17 processor MacBook pro mid 2012 13" with 8 GB of RAM
16 GB of RAM is the best you can do.
The optibay HD will null and void your warranty.

Macbook Pro mid 2012 15" (non-retina) graphics tearing

Hello everyone,
I would like to post my experiences using two identical macbook pros 2012 (non-retina, with nVidia GT650M 512MB) who presented the same graphics cards glitches and problems, and hopefully to obtain some information.
Exhibit 1: My own macbook pro
Bought from France, in November 2012. Used mainly for professional non-graphics programming, it's clean, no bloated software, and only necessary professional tools are installed. 16Gbytes of memory, by Crucial.
At some point during July, when the machine was relatively cold and I was watching a youtube video, this happened (see attached pics). The mouse was moving, and the computer was fully operational, but with this "glitchy graphics overlay". I logged out, and logged back in. Problem disappeared and appeared again at random times, 4 times during an hour. All those times, a log-out and log-in would fix the problem. After that, I could not reproduce it. Apple changed the motherboard, claiming that it could be a faulty nVidia card.
Exhibit 2: My brother's macbook pro
Bought from Greece, in february 2013. Same model as my own, same RAM, same specs. Used for professional video editing, no bloated software, mostly using Final Cut Pro X. He noticed various malfunctions with FCPX, like freezing when applying a visual effect, and graphics tearing when rendering (that's when the nVidia card kicks in, normally). Yesterday, same symptoms as my macbook pro appeared, graphics tearing, etc.
EDIT: videos of the problem:
http://www.youtube.com/watch?v=jGBijGMO9NE
http://www.youtube.com/watch?v=jnEXtVWgKKM
Both machines are in a completely different environment (I live in France, my brother in Greece), non-smoking areas, and have worked in completely different ways. Both with OS X 10.8.4.
That's two out of two. Given nVidia's background, I am starting to feel that my purchase is not so reliable as I originally thought, and I am thinking that this problem is more generic than originally seemed.
Does anyone have any relevant information on this matter? Could these problems be related to issues with nVidia drivers? Is there any information about unreliable nVidia graphics cards on 15 inch macbook pros mid-2012 (non-retina)?

Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
-Griff W.

Use PC Ram in Macbook Pro(mid 2012)

Similar Messages

Maybe you are looking for