Use PCI-e video card and onboard video at same time

This is going to be really annoying if i cant use both at the same time. I am trying to get 3 monitors running and want to use the onboard display port or vga port alongside my PCI-E video card and it seems in the bios that only one can work at a time. I am assuming this means i have to use a PCI card with my PCI-e one to get more than the 2 i have at a time.
Has anyone gotten onboard working alongside a PCI or PCI-E card? Seems like a silly thing to not enable in the Board as businesses have a need for more than 2 sometimes.
Any assistance would be great.

lead_org wrote:
this is only possible with selected versions of the Thinkcentre equipped with AMD processors using SurroundView.
Intel equipped motherboard does not allow this.
Actually, a number of later Intel based systems allow for concurrent internal and PCI card-based graphics:
ThinkCentre M71e, M81, M82, M83/p (Small Form Factor) SFF/Tower, M91, M91p SFF/Tower, M92/p,M93/p SFF/Tower
ThinkCentre Edge 71, Edge 72, Edge 91, Edge 92
ThinkStation E30/E31/E32
http://support.lenovo.com/en_NL/downloads/detail.page?DocID=HT062228
I myself use a M91p with 3 monitors on a AMD HD 6670 plus a 4th on the DP motherboard (Intel HD2000) port.  

Similar Messages

  • I am using PCI-6033E IO card and i would like to send 5 volts (high logic ) to the trigger box. the trigger box will trigger the frame grabber card, that i am using for image acquisition.

    i am using PCI-6033E IO card and i would like to send 5 volts (high logic ) to the trigger box. the trigger box will trigger the frame grabber card, that i am using for image acquisition.

    Hello;
    The first thing you need to figure out is the shape of the trigger pulse needed.
    In case you just need a logic high TTL pulse, you can use one of the digital lines of your DAQ device.
    In case you need a pulse train (multiple trigger pulses), you will need to configure one of the general purpose counters to accomplish that task.
    You can find examples in both Labview and NI-DAQ showing how to program your DAQ board to accomplish both approaches.
    Hope this helps.
    Filipe A.
    Applications Engineer
    National Instruments

  • Video card and onboard

    Hello folks I hope im in the right place.
    Just got the MB Z77A-G45 Military Class 111.
    3770k @ 3.5 clocked at 4.3,
    W7 ult. 64b
    PNY GTX 285
    Water 2.0 performer thermaltake.
    here is my problem I cannot for some reason get both onboard vid and added card vid to work at the same time.
    My settings are PEG , IGSM  256 ,  DVMT  Maximum  ,  IGD muli monitor    enabled.
    I have my GTX 285 pcie installed and I have a monitor connected to the onboard mini d.
    im wanting both to display but only the onboard or the added card will play toghether .
    if I set to igd the onboard will display only , if I set to PEG added card only , even though I have the multi- monitor enabled.
    What am I doing wrong , I don't believe the MB is bad everything else works great.
    Thanks....Robert

    Do you have Virtu enabled? Try disabling Viru and re-test.
    If you have tried that or that board doesn't support VGA virtualization, try flashing the bios to the most recent.
    >>BIOSes<<

  • Can I use Airport Express for printing and Ethernet printing at same time?

    I've been trying to set up a couple of laser printers that were given to me recently. The printers are Apple LaserWriter 16/600 PS and Samsung CLP-510. The reason I'd like to have both up and running is because the black toner for the Samsung costs twice as much as the toner for the LaserWriter. I have two questions that I am hoping someone will be able to answer.
    1) The CLP prints a test page just fine. I was finally able to get the Samsung printing while directly connected to my PowerBook G4 via usb (I had to install a Xerox Phaser 6100 driver to do so!). Today I tried putting the usb into my Airport Express (which I use for my portable internet and airtunes) and now the printer does not respond. When I try to add the CLP as a bonjour printer, I get an error adding the printer and the printer does not respond. Can someone offer some advice as to how and if the CLP may work via the Airport Express?
    2) The LaserWriter prints a test page just fine. I purchased a transceiver (albeit not an Apple transceiver - this one says Asante Friendlynet, the guy I bought it from said it would work though). The transceiver is connected to the Ethernet port on the printer - and I have a yellow ethernet cable (?) running from the transceiver to the ethernet port on my computer. I read somewhere on the internet that I need to turn on Appletalk in order to use the printer via ethernet but when I went into my network settings to do that, there was a warning that I could not turn on appletalk for ethernet without forsaking my airport. Can someone offer some advice as to how and if the 16/600 PS may work via ethernet without disrupting my (working) airport express? Also - I did not receive any software or drivers with this printer but I read that I may not need to (they come with Tiger - ?) Is anyone able to confirm this?
    Any help would be TOTALLY appreciated!
    Leigh-Ann

    Hello Kappy! Thank you for taking the time to reply to my question.
    I should update you at this point to say that I can add the 16/600 PS printer through a process that I found called 'Direct IP printing over ethernet'. (I think I've done this correctly - but I honestly have no idea about network stuff). Here's what I did:
    -went into system prefs and looked at the network settings under built-in ethernet tab. Under TCP-IP I found the IP address of my network host.
    -In the Printer Setup Utility I tried to manually add the 16/600 PS printer. In the Printer Browser window, I selected IP Printer.
    -Under IP printer, I selected LPD Protocol. I inserted the IP address copied from my network settings (above) in the address bar. In the Queue bar I typed in the name of the printer 'Apple LaserWriter 16/600 PS'.
    -Again in the Printer Browser box I gave the printer a name and location. Finally, in the 'print using' box I selected Apple and then chose the model from the drop down list. 'Apple LaserWriter 16/600 PS fax v.2014.016'
    -I got a dialogue box that asked about other installable features - clicked ok.
    -when I tried to print a Word document, the Apple LaserWriter driver opened up and appeared in my dock and then I got an immediate error saying "network host ---.---.--.--- is busy, down, or unreachable..."
    -I tried to repair permissions, but it did not resolve my issue.
    -I noticed that even after adding the 16/600, it did not show up as a bonjour printer, but remained visible as a printer in my list (although grayed out).
    I did some troubleshooting and the best I could find as a close match for my problem was that perhaps I had entered the name incorrectly in the Queue box...? If anyone knows how to find the appropriate name to insert I would sure appreciate knowing.
    Finally - you should probably know that I received this printer from someone else. I guess I'm wondering if I need to be resetting network settings on the printer somehow? The test page lists the following:
    Ethernet (Address: 08:00:07:84:78:e9)
    EtherTalk: PostScript
    NetWare: AutoSelect
    TCP/IP: AutoSelect
    IP address: 0.0.0.0
    And - now finally, to answer your questions (the best I can, that is)
    I did connect the yellow network cable directly into my laptop (right side, 4th input, counting away from me). I have a portable internet modem that plugs into my wall (for power) and then has a cable (Ethernet?) that goes into my Airport Express (LAN port?). I have no other router and there are no other inputs or outputs on my modem. My Airport Express has only one input for the modem, one mini input for airtunes, and one usb input (in which I have a cable connecting to my other laser printer (now working wirelessly via Airport Express!!)
    Should I have these cables hooked up differently?
    What is a Phonenet adaptor? My internet is provided via a cable service (not DSL). It is wireless and portable - I can take it to any major city in Canada and it works as long as it is plugged into a power source and near a window.
    I really appreciate any help you can offer. At this point I must have spent the better part of almost two weeks trying to get these older laser printers up and running.
    Thank you again.
    Leigh-Ann

  • Use the headphone jack output and bluetooth at the same time

    I am going to buy a blue-tooth headset for my 3GS.
    Am I able to use the blue tooth mic and the headphone plug on the 3GS in the phone conversation?
    Message was edited by: Winson Ip

    Now I listen the music with the Ipod through headphone amplifier for better sound quality. The amplifier is plug into the dock port. I have to buy a bluetooth headset come with the 3.5mm jack. I want the sound output still from the headphone jack or line-out. The bluetooth headset work like a cordless mic. Also, the headphone amplifier still getting work.
    Message was edited by: Winson Ip

  • Can't use video camera and AirPlay at the same time

    I was streaming music via AirPlay when I wanted to grab a video of my kid dancing. As soon as I turned on the video camera the audio stopped playing. Kinda disappointing.

    Yep. I have CC and CS installed and they both work. However, I don't see why I should use cs.
    Regards
    Kasper

  • Video blackandwhite and color at the same time

    How do I have the same video shot eg. of a bride holding a bouquet, I want to have the bride black and white and the bouquet full color. Is this a matte effect? Can someone post steps to doing this type of an effect?
    Thank you.

    http://www.kenstone.net/fcphomepage/basic_pleasantvillelook.html
    A LOT of simple basic questions all in a row. I think you ought to look thru your manual, and do a few of the tutorials. Get to know your editing system.
    Shane

  • Can I use DisplayPort (for a monitor) and Thunderbolt at the same time?

    Hi all,
    I have a mid 2011 MacBook Air 13 inch with a single Thunderbolt port.
    I have the Apple Mini DisplayPort to Dual-Link DVI Adapter cable which I am able to use to run a Dell 24 inch monitor - this cable connects to both the DisplayPort/Thunderbolt port and also a USB port on the Air.
    I want to be able to run this Dell monitor, and also run a Thunderbolt hard drive - one with 2 Thunderbolt ports.
    Is this possible?
    Can I connect the DisplayPort part of the cable to the pass-through Thunderbolt port on the hard drive, and then connect the hard drive to the Thunderbolt port on the Air?
    Thanks, for any advice :-)
    I would like to buy the Apple Thunderbolt display (which would solve this issue), but I suspect it will may refreshed soon. So I don't intend to get one until then.
    Thanks :-)

    OK,
    I have tried this myself and it does work.
    Macbook Air - connect to Seagate GoFlex Thunderbolt (Using Thunderbolt cable)
    Seagate Goflex Thunderbolt passthrough to a Dell 24 Inch monitor (using Apple Mini DisplayPort to Dual-Link DVI Adapter cable).
    Both the Seagate GoFlex and the Dell 24 inch monitor work :-)
    I am happy with this result, so I won't need to get a Thunderbolt moniter just yet - I will wait for Gen 2 :-)

  • Help me !!!how to use a DataSource to play and save at the same time??

    I create a DataSource :
    DataSource ds = Manager.createDataSource(new MediaLocator("rtp://192.168.2.195:10000/audio"));
    use this DataSource to create a cloneable DataSource:
    ds = Manager.createCloneableDataSource(ds);
    use this cloneable DataSource to create two datasource "saveDataSource" and "playDataSource",playDataSourceis used to play,saveDataSource is used to save;
    DataSource playDataSource = ((SourceCloneable)ds).createClone();
    DataSource saveDataSource = ((SourceCloneable)ds).createClone();
    Player player = Manager.createRealizedPlayer(playDataSource);
    player.start();
    but i can not hear anything ,if i use ds to create a player ,i can hear the voice.
    who can help me ,THX

    Thanks you ,now I can play with a clone dataSource ,but i also have a problem about how to save the voice to a local file .
    MediaLocator audioFile = new MediaLocator("rtp://192.168.2.210:"+audioPort+"/audio");
                             DataSource ds = Manager.createDataSource(audioFile);
                             Processor processor = null;
                             processor = Manager.createProcessor(ds);
                             processor.configure();
                           boolean result = waitForState(processor, processor.Configured);
                           if (result == false)
                               System.err.println("configuring failed");
                           processor.setContentDescriptor(new ContentDescriptor(ContentDescriptor.RAW));
                           processor.realize();
                           result = waitForState(processor, processor.Realized);
                           if (result == false)
                               System.err.println("realizing failed");
                           processor.start();
                           ds = processor.getDataOutput();
                           DataSource playDataSource = Manager.createCloneableDataSource( ds );
                           String type = com.sun.media.MimeManager.getMimeType("wav");
                           type = ContentDescriptor.mimeTypeToPackageName(type);
                           Processor saveProcessor = Manager.createRealizedProcessor(new ProcessorModel(ds,null,new FileTypeDescriptor(type)));
                           Player player = javax.media.Manager.createPlayer(playDataSource);
                           DataSink dsink = Manager.createDataSink(saveProcessor.getDataOutput(), new MediaLocator("file://D:/record/1234.wav"));
                             System.out.println();
                             System.out.println("-> Playing file '" + audioFile + "'");
                             System.out.println("   Press the Enter key to exit");
                             player.start();
                             dsink.open();
                             dsink.start();
                             saveProcessor.start();i can save a file ,but it can not play.

  • Using iPod both in Windows and Mac at the same Time?

    I was wondering if it was possible to use my brand new ipod both in Mac as in Windows without having to format or restore it every time?
    The idea is to use "manually manage songs" on both Operating Systems.
    Thanks for your help!

    iPods come formatted Windows and will work on Macs and Windows. Unless you Restore it in a Mac, it will stay formatted Windows.
    If it doesn't work, put the iPod on Disk Mode and iTunes should recognize in both systems.
    If it is formatted Mac, it will not be useable on Windows, even in Disk Mode.

  • HP 6300 using the built in video card and a quad card to support 6 monitors.

    I am try to configure a HP 6300 Micro Tower to support 6 monitors. I have installed a NVIDIA NVS510 card and installed it but not the built in video card is disabled how do I enable both cards to work at the same time?
    This question was solved.
    View Solution.

    Hi:
    Below is the link to the service manual for the Pro 6300.
    http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c03612810/c03612810.pdf
    Please take a look at chapter 3, page 23.
    There is a bios setting to enable/disable the onboard video.
    Integrated Video (enable/disable). Use this option to disable the integrated video controller
    when another video controller is present in the system. Default is enabled.
    My assumption is that when you add a PCIe x16 video card, the onboard video is automatically disabled in the BIOS.
    See if you can change the O/B video setting back to Enabled to see if that will allow both video devices to work at the same time.
    If the setting is grayed out or it enables the onboard video but disables the PCIe x16 card, then I guess it can't be done.

  • Use one external harddrive on both pc and mac at the same time

    i bought an iomega external harddrive today
    can i use it on both mac and pc at the same times?
    for ex:
    when i plug in both computer
    i could able to read and write on the hdd on both computer
    since i format it into 4 partitions (2 journal and 2 doc)
    so i wish i can use them separately in 2 computers

    Hi Jerry_L and welocme to Discussions,
    using such USB or Firewire connected external harddrives with two computers at the same time is usually not recommended by the manufacturer.
    Doing so might lead to data-loss and the like.
    Check with the manual of that harddisk to verify.
    Using it with one computer at a time with your partitioning should be doable.
    Regards
    Stefan

  • IP over Firewire and ethernet at the same time?

    Is it possible to use both IP over Firewire and ethernet at the same time?
    I want to use my TB hard drive attached to one Mac via Firewire 800 to backup another Mac also attached to the same drive via Firewire 800. I can only mount the drive on one machine at a time so I need to share it out to the other Mac. It works great if I set it up to do strait IP over Firewire, with static IPs, but that means I can't connect to the internet because my ethernet connection on both machines becomes the secondary connection method. Similarly, if ethernet is primary then I can't connect via Firewire. Is there a way to set it up so the Macs will know which method to use depending on the IP address?
    I am using 10.5.1 on both machines.
    G5, 1.8 GHz, 15.GB RAM
    MBP, 2.4 GHz, 4GB RAM
    Thanks!

    Certainly.
    In the network control panel I set Built-in FireWire to the top of the service order list, followed by Built-in Ethernet.
    Next, I set Built-in FireWire to Configure Manually with the address 192.168.1.xxx and the Subnet Mask to 255.255.255.xxx, making sure the Subnet Mask is set the same on both machines and that the IP address is different on both machines and different from the Built-in Ethernet addresses.
    I applied the settings, turned on Sharing on both machines, then mounted whatever shared drives I needed by connecting to the other machine using the FireWire IP address.
    Now I am able to share drives using FireWire 800 - which works great when used with Time Machine - and still use my normal ethernet to surf, etc..

  • Video Card and PSU upgrade for HP pavilion p6310y?

    Hello,
    I am a mild gamer and I would like to upgrade my video card so I could play games like minecraft and maplestory without my frame rate dropping every 5-10 min.  When this happens it sounds like the fan in my computer is working really hard and the game is almost unplayable.  I also play a few games from steam such as Gmod and Borderlands, however the games that seem less graphic intensive give me more problems. 
    Should I and am I able to upgrade the video card and psu for this HP pavilion p6310y?  or possibly get a better card for these game without upgrading psu?
    Processor is Quade core AMD Athlon II X4 630 / 2.8 GHz
    6gigs of ram
    1 tb harddrive
    NVIDIA GeForce 9100
    300 watt power supply
    Windows 7 64 bit
    Any help would be much appreciated!

    Hi,
    Yuo might try updating the video driver from the NVIDIA web site.
    Your PC has a 300 watt power supply.  If you don't need DirectX 11 (used for better detail in newer games), then the NVIDIA GT 240 1GB or 512 MB DDR5 is about tops for a 300 watt power supply.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Mac Pro Locked Up and Now  One Video Card and Audio Not Working

    Last night, my Mac Pro totally locked up to the point I had to power it off to get it to do anything. When restarted, one of my video cards and my audio are no longer working. I have dual monitors so tried switching the connections to see if it was the monitor and that was not the problem.
    I tried doing a formal shutdown after the restart and this also did not clear up my problem.
    Everything was working fine prior to the lockup. Any suggestions would be much appreciated.

    If you've added RAM and are using the nVidia 9400m video driver, you may be using incompatible RAM
    http://www.nvidia.com/docs/IO/60555/MemoryCompatibility_List_DA-04576-001v01.pdf
    My wife's MB is locking up when watching videos; hulu, iTunes, VLC. The above is the only answer I've found.
    BOL

Maybe you are looking for