Use PI as "Application System" instaed of "Integration Server"
All,
i have quite complicated scenario in which:
message is sent ECC > XI, this mesage triggered number of sub-interfaces XI>OraDB (via jdbc), each sub-interface activate DB stored procedure (which returns large data volumes). all returned data should be "re-packed" into IDocs which are submitted back to ECC.
I tried to encapsulate all "sub-interfaces" in a simple ECC->XI proxy interface generated coed, and implement the DB calls as XI>DB (Proxy2JDBC) interfaces. in order to enable these interfaces (for which the start point is XI) i had to change the XI (at sxmb_adm and SLD) to "Application System" instead of "Integration Server". at this point i re-tested my proxy interfaces ECC>XI and they were not working?
how can this be done?
any other possible solutions to the above scenario?
Regards'
uri
uri karagila wrote:
All,
> i had to change the XI (at sxmb_adm and SLD) to "Application System" instead of "Integration Server". at this point i re-tested my proxy interfaces ECC-->XI and they were not working?
>
> how can this be done?
> any other possible solutions to the above scenario?
>
> Regards'
>
> uri
Does your sys. Admin is aware of what you are trying to do?
You better not....
Don't let your customer define the interface to you.
You are not just a SAP PI developer.
You should be looking at the whole business process and
tell the customer what is the best way to implement the interface.
And so, I believe this integration dilemma can be simplified.
Good luck.
Similar Messages
-
Connect one Business system with two Integration Server
Hello,
Can we able to connect one Business System with two Integration Server?
I have one Business system (ECC 6.0 with the client 900) and it is already connected with PI 7.0 system.Can I able to connect the same sytem (with same client) with PI7.1?
I want to do the HTTP Connection for ABAP Proxy for this two XI system with one business Sytem ?
Is this possible ?Is there any work around solution there?
Thanks.Hello ,
This document describes about connecting with Two PI7.1 system using Application Server 7.1 and Application Server 7.0 SP14 .
I want to connect same ECC system via abap proxy with two different PI system .One is PI7.0 and another one is PI7.1 system.
Is this possible if i use Application Server 7.1 or Application Server 7.0 SP14 ?
Thanks.
Lakshmi
Edited by: Muthulakshmi Pandi on Apr 16, 2009 11:48 PM
Edited by: Muthulakshmi Pandi on Apr 17, 2009 12:21 AM -
SLD: recreate deleted Business System of type Integration Server
Hi,
accidentally i deletet the business system of type "Integration Server" in the SLD. And i can't recreate it. It always says:
"Integration Server already defined There is already an integration server defined for the selected technical system. Please select role Application System."
Any ideas to create such a business system?
The old one isn't there in the list, after i deleted it.
regards,
msHi,
If you change/delete the host name of the Integration Server after the installation in either the SLD or the exchange profile, you must adjust it accordingly in the exchange profile or the SLD, respectively
Maintaining a Business System for the Integration Server
http://help.sap.com/saphelp_nw04s/helpdata/en/9b/da0f41026df223e10000000a155106/frameset.htm
Regarding Integration server in Business System
Regarding Integration server in Business System
Refer editing the Business System
http://help.sap.com/saphelp_nw04/helpdata/en/59/2cb3a3c93a4c7086500b8345143418/frameset.htm
Thanks
Swarup
Edited by: Swarup Sawant on Jul 7, 2008 2:03 PM -
Problem by Maintaining a Business System for the Integration Server
Hi to all,
I have the following problem. I tried to change some Business systems configuration in SLD but accidentally deleted defined Business System for our Integration Server. After that I tried to create that business system again but I have the following error:
Integration Server already defined. There is already an integration server defined for the selected technical system. Please select role Application System.
Since than Im receiving the following error message when I try to refresh my adapter engine cache:
com.sap.aii.ib.server.abapcache.CacheRefreshException: Unable to find an associated SLD element
Do you know how can I define the Business System again currently I can't see it in SLD Business systems?
Ive also checked the IS URL (TR: SXMB_MONI) and it seems that its ok.
Regards
NaychoHi Naycho,
i think you have to clean up some sld rubbish
Go to SLD / Administration / Content Maintenance. Choose left side "all classes" or "landscape description" and right side "business system". Delete all entries you find for your business system, after that try to recreate it.
Regards,
Udo -
System Landscape : Corresponding Integration server not maintained
Hi Guys,
In ECC, SXMB_ADM - > Integration Engine Configuration
Edit ->Change Global Configuration data
System Landscape tab...
It shows System Landscape : Corresponding Integration server not maintained
I have maintained the corresponding integration server in the SLD where in the business I created for ECC,
I put the business system that I have created for Integration server
Yet The error persists...any idea?
Regards,
TejaHi Guys,
I have done all the setting suggested,,
then came across a thread on the forum
Unable to load Integration Server data from SLD
Regarding the System Landscape button in transaction sxmb_adm -> Integration Engine Configuration,
this button is obsolete and no longer works correctly. You can ignore the error message you get.
Thanks,
Teja -
Logical System for Role Integration Server
Dear all,
I need your help to clear my confuse.From ID I had assign business system as defined by Role Integration Server but when I check Adapter-Specific Identifiers, nothing show in Logical System. I already define Logical system in SLD. but I'm not sure incase of Role Integration Server will show logical system same with role Application System or not. becasue the other one as role Application System it's fine.
Thanks and Regards
ParkHi Park,
I could not clearly understand your question .But i think you want to know the roles of the Integration server and Application system.I would like to share some thing on their difference .Hope this will clearify you.
A business system can be configured as an Integration server or Application system:
Integration Server
The Integration server executes only integration logic available Integration Builder. They can also be identified as Pipe Line Steps. It receives XML message, determines the receiver, executes the mappings, and routes the XML message to the corresponding receiver systems. Thus configured Integration Engine is identified to be Central Configured Integration engine.
Note: Only one client of SAP system can be configured as Integration Server.
Application system
The Application system will not execute the integration logic. It in turn calls the integration server to execute the integration logic if required. It acts as sender or receiver of XML messages. So, the Application system with a local Integration Engine requires the Integration server to execute the integration logic
Thanks,
Ram. -
Business System of type Integration Server In SLD .
Hi
Can anybody tell what is the criteria on which we decide whether a business system to be created in the sld should be of type Integration Server or Application System .
And also can we have only one Business system of the type integration server in the sld ?
Can anyone please explain the concept behind this.
Thanks
Nilesh.
Edited by: Nilesh Taunk on Jun 19, 2008 7:24 AMhi,
steps to create a business system
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/flatFILETOFLATFILE&
If there is no business system for integration server, that means the post installation steps are not completed or someone messed with the business system for integration server.
To define a business system, follow post installation steps from install guide.
http://service.sap.com/instguides
SAP NetWeaver -> Release 04 -> Installation -> SAP XI -> Installation Guide - SAP Exchange Infrastructure 3.0 SR1 follow page 38
If you do not have integration server, that means your XI will not work.
Thanks,
Vijaya -
Unable to create Business System with role Integration Server
hi Experts,
we are unable to create a BS with role of integration server, its throwing error with internal server 500.
please advise. we do not have any issues while creating TS with role of WEBASABAP.
thanks and regards,
Kesava
Edited by: Prateek Raj Srivastava on Jan 23, 2012 12:13 AMHi Kesava,
what is the purpose of creating a business system of type IS? This is automatically done in the post installation by CTC templates. So if the post installation is successfully executed, this should already be there. And if not you should check if the post installation was properly executed and if there where problems analyse why they occured.
The creation of the BS is just one part of the game, so I would highly recommend to execute the hole post configuration via template or follow the help.sap.com and execute it step by step manually in the described order. Otherwise i guess this will not work.
If there where just problems with SLD - please also have a look at SA Note 1117249 - Incomplete Registration of PI components in SLD
best regards,
Markus -
Configure Role of Business System " as Central Integration Server , PI
Hi Experts,
I am running transaction code IDX5 in my xi system it is showing as "system is not a central integration server unable to start the program ".In SXMB_ADM role of business system need to configured .If we need to configure how to do this .
Regards
PraveenHi Praveen,
For configuration of integration server please go to SXMB_ADM>In configuration choose Integration engine configuration->And add one runtime parameter IS_URL...and specify the role of business system as Integration server and specify the corresponding Integration server i.e dest://httpdestination. This destination is RFC destination that should be created in PI sytem of type 'H 'which contains the target host as host name of PI system and path prefix as '/sap/xi/engine?type=entry'.
Thanks & Regards,
Priyanka Anagani -
Shared Members with Integration Server
Hi all,I need to add as shared members some member in an alternative hierarchy, but when I perform an outline update IS adds members as shered again in my alternative hierarchy.I have two ways:first: say to IS to add as shared only new members, but I don't know how;second: remove all members from my alternative hierarchy before perform the outline update, but I need to do that automatically, not manually.Who can help me?thanksciao
--->1)during INTEGRATION SERVER CONFIGURATION thru SXMB_MONI
i got an error message "CORRRESPONDING INTEGRATION SERVER NOT MAINTAINED" on execution of the configuration.
Ans : It seems at the time of creating Business systems and Tech Systems . you missed to assign the business system with XI integration server.
2)When i select ROLE OF BUSINESS SYSTEM AS ->APPLICATION SYSTEM and
RELATED INTEGRATION SERVER -> (While assigning INTEGRATION SERVER)
i got an error :could not update the business system JAVA.LANG.NULLPOINTER EXCEPTIONS.
Ans : XI not installed properly.
3)in SXI_CACHE t.code when i choose menu path ENVIRONMENT -> CACHE NOTIFICATIONS i got an error : UNABLE TO DETERMINE THE NAME OF THE CENTRAL ADAPTER ENGINE FROM THE SLD.
And : Since the type of scenario you are running is using Inernal adapter engine which is with in Integration Server...so this is an obvious error.
4)during PERFORMANCE MONITORING
errors: A)APPLICATION ERRORS: INTEGRATION SERVER UNABLE TO FETCH DATA
B)ERROR CLASS:COM.SAP.AII.RWB.WEB.PERFORMANCEMONITORING.AGGREGATE.....
C) NO COMPONENTS AVAILABLE IN THE INTEGRATION SERVER...
Conclusion : Either your XI is not installed properly or the integration engine of XI is not configured properly. Consult Basis team for this. -
ERROR REGARDING INTEGRATION SERVER
hai am k chandrakanth from bangalore a beginner in sap-xi,below am posting feew question s,kindly revert back with suitable answers with screen shots if possible(note: these are all the problems which am facing inmy PC)
1)during INTEGRATION SERVER CONFIGURATION thru SXMB_MONI
i got an error message "CORRRESPONDING INTEGRATION SERVER NOT MAINTAINED" on execution of the configuration.
2)When i select ROLE OF BUSINESS SYSTEM AS ->APPLICATION SYSTEM and
RELATED INTEGRATION SERVER -> (While assigning INTEGRATION SERVER)
i got an error :could not update the business system JAVA.LANG.NULLPOINTER EXCEPTIONS.
3)in SXI_CACHE t.code when i choose menu path ENVIRONMENT -> CACHE NOTIFICATIONS i got an error : UNABLE TO DETERMINE THE NAME OF THE CENTRAL ADAPTER ENGINE FROM THE SLD
4)during PERFORMANCE MONITORING
errors: A)APPLICATION ERRORS: INTEGRATION SERVER UNABLE TO FETCH DATA
B)ERROR CLASS:COM.SAP.AII.RWB.WEB.PERFORMANCEMONITORING.AGGREGATE.....
C) NO COMPONENTS AVAILABLE IN THE INTEGRATION SERVER...Hi Chandra,
Have you done the XI - Post congiuration completely ?
Did you cross check and validate the XI Configuration?
Regards,
Prem -
SAP PI 7.0 INTEGRATION SERVER ERROR
Hi,
When i am working with the Business Systems in SLD PI 7.0 I am unable to see Integration Server. It was displaying INTEGRATION SERVER as NONE. How to connect to the Integration server in SLD.Hi,
Try these,
1) Create a business system in SLD with role as Integration Server->Give the pipeline URL as that of ur PI i.e http://<host>:<port>/sap/xi/engine/?type=entry
Then assign this as integration server to other business sytem whose roll will Aplication System.
2) In PI -> sxmb_adm-> integration engine configuration-> corresponding integration server maintained or not.
3) In ECC -> sxmb_adm-> integration engine configuration
maintain role of business system as "LOC Application system" and
Corresponding integration server as "dest://<RFC destination for XI>" or
"http://<host>:<port>/sap/xi/engine?type=entry"
4) Cross check the RFC Connection
TCP/IP - LCRSAPRFC & SAPSLDAPI
HTTP Connection to ABAP System.
Regds,
Pinangshuk. -
"Related Integration Server" dropdown list is blank.
Dear all,
I am very new to XI and I've been trying to configure my business system.
Details of my configuration:
1. Technical System type: Third-Party
2. Selected a previously created Technical System (Type: Third-Party)
3. The SWC and products were successfully added to the business system.
4. Business System Role: Application System
Problem:
No integration server is available in the drop-down for "Related Integration Server".
Is this normal? Did I do something wrong?
Please help.
Thank you in advance.Hi Venu,
Here is my setup:
Existing Technical System:
PI1 on ootspdbs02 --> Type Web AS ABAP
PI1 on ootspdbs02 --> Type Web AS Java
Integration Server on ootspdbs02 --> Type XI Integration Server.
Newly created Technical System:
TS_Nauticus_OOTS on ootspdbs02 --> Type Third Party
Newly created Business System:
Type: Third Party
Technical System: TS_Nauticus_OOTS on ootspdbs02
Logical System Name: null
Name: BS_Nauticus_OOTS
Products installed: Product_Nauticus_OOTS
Software component: SWC_NAUTICUS_OOTS
Business System Role: Application System (Disabled field)
Related Integration Server: <<No IS to choose from dropdown>>
Please help.
Thanks.
Ron -
11i to r12 upgradation in windows platform using staged application system
Dear friends,
We are planning to upgrade our 11i windows instance to R12 with same os using staged application system concept.
Please give me some suggestion or steps to do the upgradation.
source system:
DB version - 10.2.0.3
apps verison 11.5.10.2
target system:
DB version - 11.2.0.3
apps veriosn - 12.1.3
Regards,
RathinavelWe are planning to upgrade our 11i windows instance to R12 with same os using staged application system concept.
Please give me some suggestion or steps to do the upgradation.Please see these docs.
Using a Staged Applications System (APPL_TOP) to Reduce Patching Downtime in Oracle E-Business Suite Release 12 [ID 734025.1]
EBS R12 Patching Best Practices & Overview [Video] [ID 1207498.1]
Patching & Maintenance Advisor: E-Business Suite (EBS) 11i and R12 [ID 313.1]
Thanks,
Hussein -
Related Integration server for Business System in SLD
HI All,
IN SLD we have one Technical System for PI and one TS for R/3 System.
When I crating Business System for R/3 in R/3 TS, in Integration Tab what I have to select for Related Integration Server option.
It is having None and Business System of PI TS System.
Please help me in this.
Regards,
SreeHey
Looks like you are defining this Business system as a Integration server.
See here is what you need to do.
Step 1:First of all create a business system for XI system itself,this business system will have details of XI system and its role will be Integration server.You can have only 1 Integration server(hence you are getting the error).
Step 2:Now define a business system of type Web as ABAP for R/3 system,this system will have role as Application system but the related integration server will be the name of the business system of PI system(the one which you defined in Step 1).
As of now,are you getting any business system name in the drop down box for related integration server while creating business system for R/3 in SLD?
If yes,then simply select that
Thanx
Aamir
Maybe you are looking for
-
ok so first off I have no problem with panther. I have been happy with my powerbook b4 titanium for the past 6 years now. but now that I went and bought a new iphone 3G , my powerbook doesn't support it. fortunately I converted my parents over to mac
-
I cant seem to be able to change the secutity questions on my minor daughters itunes account. I set the account up but I do not remember adding the security questions and they do not make sense to me. It says that the alternate account it would be se
-
I am running my application which requires JRE on Internet Explorer 10. Since the IE need to run in 64 bit mode, we have enabled the "Enhanced Protection Mode" in Security option of Internet Options in Advanced tab. But my application also opens up P
-
RFC or Bapi RFC ? to import RFC Adaptive Model - Is the same one or other?
Hi: I want to know if is exactly the same to import a RFC not a (BAPI marked as RFC) to use the model, since I'm getting this error: [Info]: Creating Model: PepueModel [Info]: Creating Model Class: Z_Psim_Ngc_Pep_Ue_Input [Info]: Creating
-
Filter for Camera Raw in Photoshop cs6?
Bonjour, J'ai un petit problème avec nom photoshop CS6. Je me suis rendu compte que dansl la galerie des filtres, il me manque celui de "filtre pour caméra raw" Nous savons tous que dans la fenêtre des flitres il y a: Galerie des flitres, grand angl