Use picture from keynote in another program?

This may be a weird question but I hope there is an easy solution that's staring me in the face. 
I have a presentation in Keynote that I want to use the elements of for a presentation in another program (Prezi).  I've managed to misplace my original file of one picture and after digging in the computer for a while, am wondering if there is a way to either locate the photo through Keynote, get info, get the name of the file...anything that will more easily allow me to track it down. 
I tried copy and pasting but Prezi doesn't work with Keynote in that way.  
Thanks!

Click on image, open Metrics Inspector in File info you will see name of the file. Drag it to the Desktop. Now you have desired file on desktop.

Similar Messages

  • I created an iMovie using pictures from my camera roll, I exported the movie to the camera roll and then deleted all of the pictures. Now I can't get the movie to play. Did deleting the pictures cause my IMovie to disappear? How can I get my movie back?

    I created an iMovie using pictures from my camera roll, I exported the movie to the camera roll and then deleted all of the pictures. Now I can't get the movie to play. Did deleting the pictures cause my IMovie to disappear? How can I get my movie back?

    Download and open this program, lets you look around your I phone as if it was a disc drive, might find em in the iphones drive.
    http://www.macroplant.com/iexplorer/

  • Keynote Crashing - with Lion.   Most often when I switch out of Keynote to another program - Keynote freezes - says Application Not Responding.  If I save the Keynote before switching, it does not crash - only when it says it is an "edited" file....help

    Keynote Crashing - with Lion.   Most often when I switch out of Keynote to another program - Keynote freezes - says Application Not Responding.  If I save the Keynote before switching, it does not crash - only when it says it is an "edited" file....help

    I posted this on another thread. See if this works:
    1) Uncheck "Backup previous version" in Keynote's Preferences.
    2) Make a duplicate copy of your file that has issues and save it.
    3) If you still get spinning wheels from switching between apps after editing or 10 seconds of inactivity, manually save with command+s. It may beach ball here but be patient and wait for it to finish! Try editing and resume doing work now.
    Command+s may be a bit slow but I think that might be normal since the files are so big.
    Good luck and let me know if this works.

  • I have to select a file – get Info – and change – open with and change from preview to another program and CHANGE ALL everytime I boot up

    Why do I have to select a file – get Info – select – open with – and change from Preview to another program and click CHANGE ALL with every file extention everytime I boot up.

    Back up all data.
    This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
    Step 1
    If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
    Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
    { sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -Rh $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
    Step 2 (optional)
    The first step should give you usable permissions in your home folder. This step will restore special attributes set by OS X on some user folders to protect them from unintended deletion or renaming. You can skip this step if you don't consider that protection to be necessary.
    Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
    When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. A Terminal window will open.
    In the Terminal window, type this:
    resetpassword
    That's one word, all lower case, with no spaces. Then press return. A Reset Password window will open. You’re not  going to reset a password.
    Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
     ▹ Restart
    from the menu bar.

  • Editing Audio from Timeline in Another Program

    Often, one will want to edit the Audio on the Timeline, in another application, like Adobe Audition. Premiere versions allow for this to be done easily, and with exacting control.
    Let's say that one has dozens of edited Clips on the Timeline, and they wish to edit ALL of the Audio. * Editing those individual Clips is easy, but how does one edit them all in one file, which will then replace the original Audio in the Clips?
    The best way to accomplish this is to Export, or Share the Timeline as an Audio Only file. This Export/Share will be slightly different, depending on the exact Premiere program, and even on the version of that Premiere Program. Often, the Audio-only Export/Share is from the MS AVI Export/Share screen. One would choose Export Audio, leaving Export Video unchecked. If Multiplexing does not automatically set to "None," choose that now.
    For this "round-trip" process, the Audio file format is very important. The ideal choice of Export/Share is PCM/WAV @ 48KHz 16-bit. This will yield an uncompressed Audio file, that almost every Audio editing program will easily handle, and is also the format, that one will want to Export, or Save from the Audio editor, for the second leg of our round-trip.
    Import, or Open that resultant PCM/WAV in the Audio editing program, and edit, as is needed. When done, just Export, or Save (depends on the program) that edited Audio as a PCM/WAV @ 48KHz 16-bit. In some Audio editing programs, this will be listed as WAV (Uncompressed). The Sample-Rate and Bit-Depth are important, as the 48KHz and 16-bit are the ideal for any flavor of Premiere, and though Conforming will be necessary for editing, it will be easy on the program, and there will be no issues. Stay away from any compressed Audio formats/CODEC's, like MPEG/MP3. You do not want to throw away precious data at any step. That is why we use PCM/WAV for the Export/Share, and then the Export/Save from the Audio editing program.
    When done, just Import that resultant PCM/WAV into Premiere. Wait a moment for all Conforming to complete, and then drag that WAV to the Timeline, on a free Audio Track that matches your WAV's Channel-count, i.e. a 2-channel Audio Track for Stereo, or a 1-channel Audio Track for Mono (these must match in Premiere). For more detail on channel-count and Audio Tracks, see this ARTICLE.
    Now comes a personal preference for completing this round-trip. I like to leave my original Audio, just in case I change my mind. Gathering up and Trimming the original Audio can be a tedious task. As I have placed my edited WAV onto an empty Audio Track, I just go to Window>Audio Mixer, and Mute any/all Audio Tracks, containing my original Audio. It's still there, if I ever need it, but is now Muted.
    Hope that this helps,
    Hunt
    * Sometimes we want part of the Timeline's Audio, but that part spans multiple Clips. There is no need to Export/Share the entire Timeline, and then Trim it. Just set the WAB (Work Area Bar) to the part that we do want, and make sure to choose "Work Area" in the Export/Share settings dialog.
    Also, and especially when doing just a segment, covered by the WAB, I like to position the CTI (Current Time Indicator) or Playhead (CS 5.5) at the beginning of the WAB, with Snap ON. As I drag my edited WAV to the free Audio Track, it will Snap into place, right at the beginning of the WAB.

    There isn't any simply way to where you want to go.
    You can export each track separately. Switch off the audibility for all the tracks except one. Export the track. Repeat for each of the tracks in the timeline. Export the video for reference.

  • How do I move pictures from iPad to another device ?

    My father intends to give me his iPad Air. Before I take over the iPad and reset it he had asked me to transfer all the photo's on it another device.
    He has an apple SD Card reader that connects to the iPad so is it possible to transfer the photos from the ipad to the SD card ?
    If not, what other options are open to me to save these photo's to an alternative device ?
    My knowledge of how to use an iPad is very very minimal - I'm new to the iPad and currently struggling to understand how to use it.
    Thanks 

    Photos will NOT transfer off the iPad to the SD card. The camera connection kit is for import only.
    Your easiest thing will be to use a service like Dropbox or other cloud service. Upload the photos there, download them where you want them to be. There may also be some photo apps that have better transfer services, but I don't have any to recommend.

  • Using iPhoto for organizing and another program for editing

    I really like iPhoto for organizing my photos. The tags/comments along with smart albums are amazing. The problem is that I would like to edit the photos externally to iPhoto. I am wondering if there is a way to edit your photos externally but still use iPhoto to organize them? Would iPhoto still be able to allow the external program to edit the photo nondestructively?
    I am looking to use Gimp (using X11) to edit my photos.
    Thanks for any help.
    mini/ibook   Mac OS X (10.4.8)  

    bauer172:
    Welcome to the Apple Discussions. There is a caveat to using a 3rd party editor from within iPhoto. If Gimp is capable of creating layered files and/or changes the extension to its own after extensive editing you must take some precautions so as not to lose those edits.
    Any time the 3rd party editor requires a change of extension due to the editing you must either flatten the image and/or force a save as a jpg with the same original file name OR do a Save As to the desktop and import that file as a new one. Otherwise you run the chance of saving the edited file and not have iPhoto know it exists.
    Do you Twango?

  • Why can't I place an image from Photos into another program like InDesign?

    This was never an issue with iPhoto but I just discovered that I can't place an image into InDesign from Photos. Or any design program for that matter. I only seem to be able to access Photo Booth which is useless. Using Yosemite 10.10.3 and a new iMac.

    Maybe Adobe need to update their package - the media browser works just fine from Safari, Pages, etc  - same as it did previously with iPhoto and Aperture except now there is the addition of Photos
    Contact their support and see what they have to say
    Certainly the export work around is more trouble
    LN

  • Sending pictures from iPhone to another phone....

    how do you do this? can you only email the pictures?
    Thanks a bunch

    It was a pretty HUGE disappointment to realize that the iPhone does not support MMS. I've paid $400 for this awesome piece of technology that can't do something that my old, beat to ****, $100 plain cellphone can--send/recieve a text message with an attached photo to/from another cellphone or iPhone. I did this routinely with my husband and friends and losing this capability is a drag. The iPhone has such a nice camera that I'd like to be able to capture nice photos and send them to friends and family--directly on their phone. And frankly I'd like to be able to receive photos. Please, Apple engineers, reconsider your stance on excluding MMS capability.

  • Photoshop used for this? Or another program...

    I am trying to create graphics for a cable TV show. Text and logos over moving film images.
    Is that something that is done with Photoshop or is there a program out there that people use most often in that manor?

    What live video switching system are you going to be using? Or will this be done off-line in an editor like Avid or Premiere? While Photoshop can handle graphics, many of these live and off-line tools will have built-in titling capabilities.
    You should ask the cable TV facility (assuming cable access) what image formats are supported with their equipment. Then you can prepare graphics in Photoshop and save them to the right format.

  • Widescreen pictures from Keynote into a podcast

    I created a Keynote presentation at 1280x720 resolution, exported it to iPhoto to be put into an enhanced podcast. But when I drop pictures into the podcast track, it zooms into the center of the picture, cutting off the left and right side. Is there any picture controls in Garageband so I can fix that?

    Just double-click the image in the timeline to bring up the editor.
    HTH
    -P

  • Shadow disappears after copying from Keynote to other programs...

    I am trying to copy a drawing that I created using Keynote 09 to Adobe Photoshop (simply using copy/paste) and all shadows disappear once I pasted it into a Photoshop document. I know that this was no problem in iWork08/Keynote08, which I used previously. Anyone here with a workaround to that problem?
    Thanks
    S

    The effect of the shadow is created by KeyNote and is not a part of the drawing.
    You will need to save a pdf of the drawing and take that into Photoshop. Be careful as the shadow may turn out to be very low resolution and pixelate any text over it.
    You should be able to recreate a better shadow in PhotoShop anyway.

  • HT1766 How can I get a photo out of the iPhone camera roll to use in an email or another program

    I have photos of my car that I took with my iPhone. I'd like to use them for an advertisement to sell the car. How do I get them off the phone or out of the backup folder that iTunes produces when I back up my phone. I'm using a Windows 7 computer.

    Thanks, but I figured it out. I just had to find the files in Windows under what would be considered a "drive." Once there, the photos all show up in a folder as JPEG files. Got the ones I needed.

  • How to use setters and getters in another program by using bean

    how to use the setters and getters methods using database connection by bean

    Say again?And so he did:
    http://forum.java.sun.com/thread.jspa?threadID=750645
    kind regards,
    Jos ;-)And again
    http://forum.java.sun.com/thread.jspa?threadID=750643&tstart=0
    No, that's his class mate I guess; it must be national getter and setter
    day somewhere today ;-)
    kind regards,
    Jos

  • Slideshow using pictures from image table in database

    Hi All,
    I am a final year computer science student developing a website to advertise accommodation for students. I am having some difficulties in figuring out how to create a region where I can have a dynamic slide show of property pictures (these pictures are stored in a image tbl in the database) where when I click on any picture it displays the property details belonging to that picture.
    Can anyone assist me with this problem. I still have a lot of other question that I need help with but I will take it one at a time.
    Thanks for any sort of assistance that I can get.
    Regards,
    Elswin1.

    Typically if the field doesn't show up the CR can't figure out what type it is which means when we query the DB for the field type the client/server returns the wrong type or some type that CR doesn't support.
    How is the field defined on the server?
    Thank you
    Don

Maybe you are looking for