Use PNAgent with ICA client on Sunray

Can the PNAgent settings be used in the ICA client for sunrays? We are currently using a kiosk session that launched "/usr/lib/ICAClient/wfica" and then within the wfclient.ini file we have 3 xenapp servers specified for the HTTPBrowserAddress. The current problem we have is if a session is disconnected, they don't necessarily alwways reconnect to the same session because they might hit a different server as PNAgent is not being used.

Similar Messages

How to use log4net with C# clients

Hi,
Can anybody please give an example of how to use log4net with C# clients? Foe java clients you can use the
<logging-config>
<destination>log4j</destination>
How do we use it with C# clients? Any example will be appreciated.
Thanks.
-ali

Ali,
The following is an example on how to define a custom logger (including log4net) in tangosol-coherence-override.xml for coherence .NET client; you need Coherence .NET client 3.7.1 patch 1.
<coherence xmlns="http://schemas.tangosol.com/coherence">
<logging-config>
<destination>common-logger</destination>
<logger-name>log4net</logger-name>
<severity-level>9</severity-level>
<message-format>(thread={thread}): {text}</message-format>
<character-limit>8192</character-limit>
</logging-config>
</coherence>
You also need to configure log4net in app.config. Please see the following web page for more information:
http://netcommon.sourceforge.net/docs/2.0.0/reference/html/ch01.html
-Luk

HPDM using WOL with thin clients using WES8

When using HPDM 4.6 with t620 clients using WES8, the Wake on LAN option does not work.It makes it impossible to do settings and deployments outside office hours.How can this be fixed?

Hi,
Thin clients normally have a low memory allocation on the video card (8mb to 16MB) so this can be a problem. Check to see if you can change this in the BIOS on the WYSE. If not connect at 256 Colours to reduce this. If you have pictures linked to products then their resolution will not be good but for SAP itself the difference is small. Also rename the SAPSS.AVI to .old if you have not already done so so that the splash screen does not come up when logging in.
In my multimedia testing on thin clients, unrelated to SBO, I found that both memory and processor power made a huge difference, which is contrary to thin client manufacturer claims. As an example I used a 200MHz/64MB TC for a flash application and sound was about 3 seconds behind the image and the image update would skip 3 to 5 frames when updating. Moving to a 800Mhz/128MB TC The frame refresh rate was almost perfect and the sound was only about 0.5 seconds behind. I would therefore test on a more powerful thin client to see if it improves performance.
The S30 is a 400MHz (rated @ 533 on performance by AMD). Try a 1GHz TC with the maximum Video memory you can find.
We are currently using VXL Itona 800Mhz/128MB and do not experience too much rolling but we are using 256 colours.
Hope this helps.

Problem in Using Oracle with Thin Clients(Image) Technology

I am running Oracle on Server and mine clients are thin clients.I have image on Oracle Server from where I am booting thin clients.The Problem I am facing is when I use single Thin client then everything works but as I starts using more than one thin client mine I got the error rwrun60 and it gives the that close or ignore message.I am using run_product for running reports.Then I tried to use run_report_object but how can I pass paramater using run_report_objects

i m not getting much from what you are saying.... but i found something.i created a windows application and then was able to create a dataset from ODAC connection to oracle. then dragging the dataset on windows form... i was able to create a data grid containing the data. hittin F5 the app was running successfull. however when tryin to do same in asp.net...when configuring the data source using sql datasource it gave me following error ...
ORA-00942: table or view does not exist
help help

Does the Citrix ICA client work with Safari for Windows XP?

I really like safari for XP so far. However, I use the Citrix ICA client software to remotely access programs from a server at work. I tried following instructions on the Citrix knowledge base site for installing the client for Firefox, etc. since they did not have any info on Safari for windows. Please help, or I will be stuck using Explorer. Thanks.

The Citrix ICA client doesn't work with Safari on a Mac. Given the number of bugs and other problems with the Safari 3 Beta for Windows, I'd guess that the chances of Citrix working with this release are slim to none. However, the Citrix ICA client works well with Firefox 2.0, in case you're interested in trying it.

Citrix ICA Client Problems

Question: Why does my Citrix ICA Client keep quitting?
Background: I've been using the Citrix ICA Client (v. 6.3) to access a Windows network at a firm I'm consulting for. I connect through something called the MetaFrame Presentation Server. Everything starts fine; I'm able to connect to the server and open a session. Eventually, however, the client quits on me. I get the standard dialog box "The Application 'Citrix ICA Client' has quit unexpectedly." This is annoying, but the real problem is that when I try to reconnect, I can't! The IT folks have to do something on their end with the server to allow me to get back in. Needless to say, they are getting tired of this. They haven't found an explanation on their end, so I'm working on it from this end.
I'm working on a broadband network, cable modem, wired connection to a router (which also is a wireless hub, for my spouse's laptop). FWIW, most of the quits seem to occur while I'm using MS-Word (2004), but then, I'm almost always using that.
I don't have any info on the nature of the Windows network or server, but could get it if necessary. I was hoping there might be a known issue (with a known solution!) that wasn't that dependent on the specifics on the other end.

Same here - Safari won't fire up the ICA client.
My work-arount is
- right-click and save the linked file (with the .ica extension). Clicking on this file finally starts the ICA client.
- or to use firefox

Arch64: really need to get Citrix ICA client 10 working (and others)

Hi,
I am currently running Arch64 Voodoo on my Dell M65 notebook. It is a really great and fast distro and I am trying to make it my default distribution ....... however for my work I absolutely Must use the citrix ICA client (v10).
Unfortunately it won't install, it gives me a wrong ELF class on libxaw.so.7
I looked around in the community llib32 stuff, but it doesn't appear to be there, can anyone help me getting ICA working, I really need this and It would suck having to switch to another distro or the 686 version. There isn't a source version from ICA available so I cannot compile it myself.
On a side note I also have a minor java problem, I want to install azureus but that has a dependency to jre6 and I want to install OpenOffice.org but that has a dependency fo java-cgj-compat, does anyone have a olution for this? I already downloaded SUN's jre from their site but ofcourse the package azureus doesn't know this.
thanks a lot in advance,
stefan

I haven't heard of these emul32 packages before, but I think what you need are the proper lib32 packages. Specifically one for libxaw. Unfortunately, one isn't available in the AUR. I took a look at some of the other lib32 PKGBUILDs and all they seem to do is download the i686 package for the corresponding library, uncompress it, and copy all the shared object files to /opt/lib32/usr/lib. With all that said, here is a PKGBUILD for lib32-libxaw.
I won't be adding this to the AUR because I don't use it & therefore don't want to maintain it, but anyone else may submit it if they choose.
Looks like this library should depend on libxmu, libxpm and libxp. The first is available in the community repo as lib32-libxmu. The other two can be downloaded from the AUR as lib32-libxpm and lib32-libxp.
_pkgsourcename=libxaw
pkgname=lib32-$_pkgsourcename
pkgver=1.0.4
pkgrel=1
pkgdesc="X11 Athena Widget library"
url="http://xorg.freedesktop.org/"
arch=('x86_64')
groups=('lib32')
depends=('lib32-libxmu' 'lib32-libxpm' 'lib32-libxp')
source=(ftp://ftp.archlinux.org/extra/os/i686/$_pkgsourcename-$pkgver-$pkgrel.pkg.tar.gz)
md5sums=('5dd7b928b96b72e4d31bd29c957b7fc5')
build() {
cd $startdir/src
mkdir -p $startdir/pkg/opt/lib32/usr/lib
cp -dp usr/lib/*.so* $startdir/pkg/opt/lib32/usr/lib

ALE with Same Client

Is it possible to use ALE with Same client...when PO created and send message to IDOC. Than come back the same client to create the SO? As i know, it is possible to go for another client or system. I am not sure is it possible in the same client and also any limition about this?
For eg:-
A purchase order is created in company code 1000.
Then using ALE,the system will generate an Idoc to transfer data to another company code 2000.And the system will generate corresponding CustmerOrder(SO) in company code 2000.

Hi,
Configuring the ALE/Idoc scenerio for the same client is very much possible, because you would defining the same client/port but might used different message type. But so you think this will help you rather than that if the clinet is same rather than configuring the ALE/IDOC setting why not write a piece of ABAP code finding the proper USER EXIT/INCLUDE .i.e. when a PO is created with company code ABC then that USEREXIT will trigger which will send those data to another company code. The user exit can easily be identified by the functional guys.
Mostly the ALE/Idocs scenerios are used when we have multiple clients or multiple system.
Hope this helps.
Cheers,
Jay

Problems with Citrix ICA Client

Guys,
To work from home, my employee provides web access using Citrix ICA Client. I used to log into a given web page, type my ID, fixed pasword and a 'token' password, and when I clicked the option I wanted, it opened the Citrix client and all worked fine.
Since I've updated to Lion, it's not working. It keeps giving a message to 'update to a browser that supports Java for Cocoa, such as Safari'.
The problem is that I'm already using Safari… I even tried it with Chrome and Firefox, but ig gives the same error message...
Need help! Please!
Cheers,
Sandro

Same here - Safari won't fire up the ICA client.
My work-arount is
- right-click and save the linked file (with the .ica extension). Clicking on this file finally starts the ICA client.
- or to use firefox

Using an 8.0 client with a 6.5 server

We currently have an application running on AIX and Tuxedo Client 6.5, that connects
to a 6.5 server.
We are thinking on migrating the application to Linux, and found that Linux is
only supported for Tuxedo 7.1 and higher.
Would there be any problem if we used the 8.0 client instead of the 6.5 client
to connect to the same 6.5 server?
If that was possible, then we would be able to migrate the application to Linux.
Thanks for your help,
Debora

I think you might face problem if the client is native
because client will be built with shared library
libtux.sl which will give you an unresolved symbol
error.
but if you have clients which come in as workstation client
then you should be able to connecct properly.
use WSL with -t option in that case or export an environment
variable WSOFPRE71(confirm the spelling) to yes.
thanks
Roopesh
"Debora" <[email protected]> wrote:
>
We currently have an application running on AIX and Tuxedo Client 6.5,
that connects
to a 6.5 server.
We are thinking on migrating the application to Linux, and found that
Linux is
only supported for Tuxedo 7.1 and higher.
Would there be any problem if we used the 8.0 client instead of the 6.5
client
to connect to the same 6.5 server?
If that was possible, then we would be able to migrate the application
to Linux.
Thanks for your help,
Debora

How to use authid with rwservlet via WebLogic Thin Client

1. Using J2EE Thin Client for WebLogic (WL) to submit interactive requests for Oracle Reports (App Server 10g) running on another server without SSO.
2. After starting basic Infrastructure, we start rwserver in batch mode (no other mid-tier components are used).
3. It appears that the cgicmd.dat file in the Thin Client conf directory on the WL server controls the DB access with the key:connect string info it has.
4. We had been allowing the testers to come in via the web through a SunOne (iPlanet/Netscape) web server instance, which in turn connects to the WL server running the Thin Client instance.
5. We noticed that anyone could run rwservlet to view report status with the showjobs command via a URL through the same mechanism as point #4 above, and were concerned about security of the reports - "bad".
6. Then someone realized the showmap command could also be specified, and thus see the DB connect string (Id/pw/SID) - "worse".
I researched securing Reports, and read through the white paper, "Securing Oracle9i Reports", and although it discusses security without using SSO, all it says is "users accessing a secured instance of Oracle9iAS Reports Services will be challenged to identify themselves by the Reports Servlet, using its own authentication mechanism (as with Reports6i)", but I can find no explanation of how that works, nor how it would work with the WL Thin Client.
Questions:
1. How are the Id's/passwords set up under AS 10g "as with Reports6i" in this environment going through the WL Thin Client?
2. Is there anything else that needs to be done to secure the created reports, and the connect string info (i.e. using authid with rwservlet?showjob, and not allowing the rwservlet?showmap to be executed at all)?
TIA,
ROC

the JDBC Developer's Guide (11gR2)
gives an example in chapter 9 under "JDBC Thin Driver Support for Encryption and Integrity", sub- "Setting Encryption and Integrity Parameters in Java"
from Oracle SQL Devloper, without redirecting the client to use the OCI/thick driver, choose, new database connection, connection type Advanced. add the entry from the example noted above to the Custom JDBC URL form.
for example:
Properties prop = new Properties();
prop.setProperty(OracleConnection.CONNECTION_PROPERTY_THIN_NET_ENCRYPTION_LEVEL,"REQUIRED");
prop.setProperty(OracleConnection.CONNECTION_PROPERTY_THIN_NET_ENCRYPTION_TYPES,"(AES128)");
OracleDataSource ods = new OracleDataSource(); ods.setProperties(prop); ods.setURL(jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=xxxx)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=xxxx)(INSTANCE_NAME=xxxx))));
Connection conn = ods.getConnection();
strange side note!, we could not get this to encrypt unless the sqlnet.ora file included the SQLNET.ENCRYPTION_SERVER=required. if this was set to default(accepted), and even though the jdbc thin client properties set to required, the network traffic was still clear text.
good luck

Strange problem with SSL Sockets using more than 10 Clients

Hi
I�m using Jsse ( JDK 1.4.2_06 ). I have coded a Client/Server Applikation acting over SSLSockets or over unsecured Sockets. If I use unsecured Sockets everthing works fine, but if I use SSLSockets for the Connection and about 20 Clients, the Clients often can�t connect to the Server and the following Exception was thrown:
java.net.ConnectException: Connection refused: connect
Could it be that there is some strange problem with SSLServerSockets relating to this phenomenon?
If I use only a few Clients the Exception occurs never or only sometimes.
Has anyboby an idea what is happaning there?
Regards Chrisli

Hi
From the description of your scenario, you have coded your own server side of the application. I would advise that you consider moving your application to run under Tomcat framework and test if you still get the same exception.

I want to share a folder of images with a client who is also using bridge. I want the client to be able to edit metadata and rate the image. How can I do this?

I want to share a folder of images with a client who is also using bridge. I want the client to be able to edit metadata and rate the image. How can I do this?

Metadata won't be a problem as long as you use Bridge to copy the file from within Bridge to whatever media (flash drive, CD/DVD. email, etc) you plan to use for the sharing.
I'm not sure about the Label part. Maybe it will travel along too.

I unable to run ejb with application client using oc4j j2ee container

Hi,
I have installe oracle9i (1.0.2.2) oc4j j2ee container.
I unable to run the ejbs . please help me how to run ejbs with application client and which files are shall configure.
See the client application is :
public static void main (String []args)
try {
//Hashtable env = new Hashtable();
//env.put("java.naming.provider.url", "ormi://localhost/Demo");
//env.put("java.naming.factory.initial", "com.evermind.server.ApplicationClientInitialContextFactory");
//env.put(Context.SECURITY_PRINCIPAL, "guest");
//env.put(Context.SECURITY_CREDENTIALS, "welcome");
//Context ic = new InitialContext (env);
System.out.println("\nBegin statelesssession DemoClient.\n");
Context context = new InitialContext();
Object homeObject = context.lookup("java:comp/env/DemoApplication");
DemoHome home= (DemoHome)PortableRemoteObject.narrow(homeObject, DemoHome.class);
System.out.println("Creating Demo\n");
Demo demo = home.create();
System.out.println("The result of demoSelect() is.. " +demo.sayHello());
}catch ( Exception e )
System.out.println("::::::Error:::::: ");
e.printStackTrace();
System.out.println("End DemoClient....\n");
When I am running client application I got this type of Exception
java.lang.SecurityException : No such domain/application: sampledemo
at com.evermind.server.rmi.RMIConnection.connect(RMIConnection.java : 2040)
at com.evermind.server.rmi.RMIConnection.connect(RMIConnection.java : 1884)
at com.evermind.server.rmi.RMIConnection.lookup(RMIConnection.java : 1491)
at com.evermind.server.rmi.RMIServer.lookup(RMIServer.java : 323)
at com.evermind.server.rmi.RMIContext.lookup(RMIConext.java : 106)
at com.evermind.server.administration.LazyResourceFinder.lookup(LazyResourceFinder.java : 59)
at com.evermind.server.administration.LazyResourceFinder.getEJBHome(LazyResourceFinder.java : 26)
at com.evermind.server.Application.createContext(Application.java: 653)
at com.evermind.server.ApplicationClientInitialContext.getInitialContext(ApplicationClientInitialContextFactory.java :179 )
at javax.naming.spi.NamingManager.getInitialContext(NamingManger.java : 246)
at javax.naming.InitialContext.getDefaultInitialCtx(InitialContext.java : 246)
at javax.naming.InitialContext.init(InitialContext.java : 222)
at javax.naming.InitialContext.<init>(InitialContext.java : 178)
at DemoClient.main(DemoClient.java : 23)
.ear file is copied into applications directory.
I have configured server.xml file like this
<application name="sampledemo" path="../applications/demos.ear" />
demos.ear file Contains following files
application.xml
demobean.jar
Manifest.mf
demobean.jar file contains following files
application-client.xml
Demo.class
DemoBean.class
DemoHome.class
ejb-jar.xml
jndi.properties
Mainifest.mf
Please give me your valuable suggestions. Which are shall i configure .
Thanks & Regards,
Badri

Hi Badri,
ApplicationClientInitialContextFactory is for clients which got deployed inside OC4J container..
For looking up EJB from a stand alone java client please use RMIInitialContextFactory..So please change ur code....
Also please check ur server.xml
Since you have specified your ejb domain as "sampledemo"
you have to use that domian only for look up..But it seems that you are looking up for "Demo" domain instead of "sampledemo" domain...So change your code to reflect that..
Code snippet for the same is :
Hashtable env = new Hashtable();
env.put("java.naming.provider.url", "ormi://localhost/sampledemo");
env.put("java.naming.factory.initial", "om.evermind.server.rmi.RMIInitialContextFactory");
env.put(Context.SECURITY_PRINCIPAL, "guest");
env.put(Context.SECURITY_CREDENTIALS, "welcome");
Context ic = new InitialContext (env);
Hope this helps
--Venky

We encountered a problem with some client machines that use Firefox version 24ESR and IE8. Ajax requests of aspx pages from Firefox are getting the following er

I encountered a problem with some client machines that use Firefox version 24ESR and IE8.
Ajax requests of aspx pages from Firefox are getting the following error from the iis server (iis version 7.5):
Bad Request - Request Too Long
HTTP Error 400. The size of the request headers is too long.
From analyzing the request that was sent to the server, I saw that the request consist of only the viewstate of the aspx page.
I tried to disable the viewstate for one page and the server got the request correctly.
I do not encounter any issues on these laptops with postback requests from Firefox or when running the same application with IE8.

Sometimes that means that the page address sent is loo long.
Check the link address you are using.
I can't help you further and will send for more help.

Use PNAgent with ICA client on Sunray

Similar Messages

Maybe you are looking for