Use Remote DVR With Your own Router And A Nim.

After some experimenting i have hopefully figured out how to get both Caller Id on tv and Remote dvr to work using these TCP port forwards to static ip's for your dvrs and set top boxes using a nim. In your router go to port forwarding and forward ports 35001 - 35009 use as many as needed for the amount of set top boxes you have. I was also informed by a tier 2 tech support person that in order for the set top box to always start listener 2 which is the TCP listener you need to spoof you wan mac address of you unsupported non verizon router to that of a dlink. Because dlink was verizons original setup and when there system sees a dlink router it knows to assign the TCP listener which is listener 2. I tried to get UDP to work using 63145 udp port. It just doesn't work. If you use this method you loose verizon's support. Oh and if your box is stuck on Listener 1 call verizon and ask to speak or request that they switch it to listener 2. I would do this before you switch the router it makes it much easier.

Hi,
I have found a workaround but SHAME on NOKIA BROWSER.
I have loaded OPERA MINI and it works: I have got the page of my NETCAM even if it is not possible to get the video because OPERA does not support ACTIVEX (DCS-2120 requires an acticeX to be loaded the first time)
WHO IS GOING TO TELL NOKIA ABOUT THEIR BROWSER ISSUE?
I hope that my experience will help other N95 users.
Now, I am going to get the video stream with realplayer.
Bye

Similar Messages

Can i use iCloud keychain with my own passwords and not with what is assigned and stored?

Can i use iCloud keychain with my own passwords and not with what is assigned and stored?

tammersalem wrote:) <-HDMI-> (HDTV)
My main concerns are:
-If I use iTunes on my main computer, will it then be available to Apple TV?
-If I use Apple TV to download will it be available to my Main computer?
-Can the Apple TV use a media server for storage over LAN (using NTFS Samab or otherwise)?
Basically iTunes feeds AppleTv with media either syncing (copying to it) or streaming live.
Media must be compatible with AppleTV.
AppleTV requires a proper iTunes instance running - it cannot access a NAS directly.
If you store media in a folder on a NAS and it's part of the computer iTunes library (just stored on the NAS vs internal/external drive), then when running iTunes makes this content available to AppleTV.
Data will travel:
NAS > network > iTunes > network to AppleTV
As the path is potentially slower than internal/external attached drive > iTunes > network > AppleTV, it may or may not work robustly for streaming.
If AppleTv is set to sync (it can also stream in this mode), when you purchase direct on AppleTV, the media should sync back to where the itunes library is stored (via iTunes) to keep things in sync and to allow you to backup the media.
You cannot drag/drop media to/from AppleTv across the network, nor can it directly access storage itself - iTunes is an essential cog in the wheel.
The majority of commercial 'in-built iTunes media servers' will not work directly with AppleTV as it has to be 'paired' with iTunes by entering a numerical code in iTunes and does not simply see 'shared libraries'.

Using Telstra Air With your own modem

Hello Everyone,
I received a Telstra Gateway max in the mail for upgrading to one of Telstra's latest bundles.
To be honest i am not too fond of any of Telstra's modems i noticed the device has a wan port on the back of it.
I then had a thought that i could hook the modem up to my current modem and use the Gateway max to use Telstra Air.
So here is my current setup
<Modem>--------<Telstra Gateway Max>
All my computers connect to the main modem and the gateway max has a single access point enabled but with SSID broadcast disabled.
The configuration changes i have done in the gateway max is just putting my pppoe username and password in.
And this all works wireless devices can now see and connect to Telstra Air and Fon WiFi

Thanks for that Gibbsy, handy info fopr those looking for a similar work around.

Will using your own router allow loopback connections?

SomeJoe7777 you are correct regarding the route of a given packet when using a WAN IP locally (NAT loopback). However will again state that NAT loopback does not work using a router behind the NVG589. As you stated it should...which is why the issue lies with the NVG589. Most likely something to do with IP passthrough mode on the NVG589 not being a true bridge mode which in turn does effect one's own router. Bottom line I encourage you to attempt NAT loopback yourself with a router behind the NVG589 and report your results. It wouldn't be the first time that ATT said something should work only to later admit it was a problem with their hardware.

NAT loopback is defined as a function of a router where connections to ports on the outside IP address are translated and routed to the server defined in the router, even when the connection attempt comes from the "inside" portion of the network.
e.g.. Let's say we have a router with an outside IP address of 99.99.99.99 (a public IP address), and the router has been configured so that inbound connections to port 80 on that WAN interface are translated to a destination address of 192.168.1.20 (on the inside network). This enables a web server running on the 192.168.1.20 machine to respond to web requests from the Internet, provided those web requests are coming in to 99.99.99.99.
If another computer on the internal network, such as 192.168.1.101, can pull up the web site using http://99.99.99.99 (instead of the direct connection of http://192.168.1.20 ) then the router implements NAT loopback.
Now, knowing that, let's review:
If you use your own router, and it is the device doing the network address translation (NAT), that means it's outside address is x.x.x.x (a publically routable IP address), and it's inside addresses are private, in RFC 1918 address space. This can be set up with the U-Verse modems using DMZPlus (2Wire/Pace 3xxx series gateways) or IP Passthrough (Motorola NVG5xx series gateways).
NAT loopback in this situation is completely dependent on the functionality of your own router. By definition, any NAT loopback request under this circumstance never leaves your network and your router, and thus never touches the U-Verse gateway at all.
The bottom line is that if NAT loopback is not working with your router, then you either haven't configured your router properly, or your router doesn't support it. The ISP gateway has no bearing on this functionality whatsoever when configured in conjunction with your own router as described above.

How To Use Your Own Router with Out Loosing Verizon's FIOS Services

How to use your own router with Verizon’s FIOS Service
First, you need a basic understanding of how FIOS works but unfortunately there are two types of FIOS systems out there. All of the systems utilize a fiber optic cable to bring TV, phone and internet to your location over one optic cable. In addition these systems provide interactivity including widgets, remote DVR, movies on demand and so forth via an IP (Internet Protocol) signal. Your STB (Set Tip Box) requires both a video and IP signal. The IP signal is necessary for all of the aforementioned interactivity. The fiber cable terminates at the Optical Network Terminal or ONT for short. The ONT converts the optics into a digital signal that can be utilized by ones equipment. From the ONT your video, phone and internet are provided to the location. This is where things can differ as the internet signal can be provided via a coaxial (MoCA or Multimedia over Coax Alliance) or RJ45 Cat5 (Ethernet) cable. It is important to identify and understand the differences of these two setups. In my case I have my internet entering via Ethernet cable, which in my humble opinion makes things a heck of a lot easier.
How does one tell the difference? In most cases it’s rather simple; just look at the Verizon’s router WAN (Wide Area Network) Port. Does it have a RJ45 (Ethernet) or Coax (TV cable Cord) going to it? If the router’s WAN port doesn’t have a coaxial connector then one will need to convert the MoCA signal into a usable Ethernet signal that routers understand. The easiest way is to use Verizon’s router as a bridge. In this method the Verizon’s router simply converts the signal and passes it along to your own router. The challenge is to try to maintain the interactivity that FIOS TV provides. Because of this one needs to supply the IP routed signal back to the FIOS router. There are multiple methods for doing this and I would recommend investigates which one make the most sense.
In my particular case the IP signal was provided by Ethernet. Again there are various ways of installing one’s own router. The hardest is to utilize Verizon’s router as a bridge. This setup requires configuring Verizon’s router as a bridge and also creating a VLAN (Virtual Local Area Networks). In addition one needs to set up their own router so it will work with the various routing tables and networks. For me this is too complex for the average person and it can be difficult to trouble shoot if something goes wrong. Please consider that Verizon will not support utilizing third party routers.
The easier method is to request an Ethernet signal (if you don’t already have one) from their ONT. I would highly recommend getting your hands on a NIM or Network Interface Module. This device is used to convert Ethernet to Coaxial so it can be fed back to your STBs. These can be purchased online and Verizon technicians can be a valuable resource with these sorts of acquisition. At the very least they can point you to the right direction. Once you have a NIM the rest is rather simple.
Log into the current Verizon Router.
Located the router’s MAC address and copy it down.
Go to the port forwarding section and copy down the Applied Rules.
Example:
Network Computer/Device: 192.168.1.100:63145
Application & Ports Forward: Application UDP Any -> 6347
Note: There may be up to three entries for each one of your Set Top Boxes.
Look at your current device list, typically found on the home screen. Copy down your STB MAC and IP address.
Example:
IP-STB1
Connection Type: Ethernet
* IP Address: 192.168.1.100
IP Address Allocation: DHCP
*MAC Address:                07:73:fFe:ad:8b:3f
* Things you will need to write down
Go to the network section and look for the main Ethernet connection. Select this and then select more setting, typically found at the bottom. Release the current lease.
Remove the Verizon router
Install your router
Connect the NIM by plugging in an Ethernet from one of the routers LAN (Local Area Network) ports to your NIM. Then connect the coax cable, the same cable that was used by Verizon router.
Set you DHCP routing IP pool to accommodate Verizon’s STB IP’s (note their IP’s start at 192.168.1.100)
Go to DHCP section and reserve the STB IP’s by inserting the IP’s and MAC addresses. This shall ensure that nothing else utilizes the same IPs as the STBs thereby preventing IP address conflict.
Add the port forwards from Step 5 above.
Clone Verizon’s Mac Address utilizing the info from step 2
Finish setting up the router in typical fashion.
Unplug and re-plugin your STB’s and test functionality. It’s best to try using a widget or Movie on demand function.
Note: if the new router can net get an internet signal contact Verizon’s support and have them release the IP and reset the ONT.
EVERYTHING should be working at this point.

3 Go to the port forwarding section and copy down the Applied Rules.
Example:
Network Computer/Device: 192.168.1.100:63145
Application & Ports Forward: Application UDP Any -> 6347
Note: There may be up to three entries for each one of your Set Top Boxes.G
Your display obviously is not like mine as mine does not dosplay the port associated with the ip address
whatever, the STB's start at 192.168.1.100 and icement by 1 for each
the port addr's will be 63145 alo incrementing by 1
there is 1 entry for each in my pf list
however each ip addr also has a port entry starting at 35000 also incrementing by 1 for each ip addr
For some unknow reason these are duplicated e.g I appear to have 11 entries exaactly the same for each stb and as the fios services rules have no action switc there is nowhere to delete the extraneous garbage.
Why do you clone the mac addr??

Using your own router

Good day all, I would like to hear from others who use their own routers to connect to Verizon Fios. Are there any pro's or con's to using your own? Will your connection be more secure using Verizon's equipment or your own. Any difference in speeds noted? Thank for your opinions.

Just got FiOS today and faced the same issue. I need to keep the Actiontec router for the TV STBs, but it has not the same features as my D-Link 655. There are instructions online on how to turn the Actiontec into a network bridge, but that may interfere with services.
Here is what I did:
1. Change the IP of the Actiontec router to something different than the 192.168.1.1 so that it doesn't interfere with your existing router (unless your router already uses a different IP, then you can skip this). I followed the instructions from here: http://www.dslreports.com/forum/r20329726-northeast-how-to-change-the-default-IP-on-Actiontec-M1424W...
Note 1: Once you change the address you need to reconnect to the other IP address!
Note 2: You also need to change the DHCP range on the Actiontec to no longer include the new IP. This can be changed on the same page.
2. Make sure that you power cycle the STBs, otherwise they still look for the router on the old address
3. Plug your router of choice in and connect one of the LAN ports of the Actiontec to the WAN port of your router
4. You now should be able to access Internet through your router.
I use DynDNS so that I can remote into a system at home using a domain name. If you have such a setup be aware that the web admin of the Actiontec will be accessible from the Internet!
I fixed that by
1. Setting the Actiontec's firewall to the lowest setting
2. Forwarding all TCP and UDP ports to my router except for the port 4567. That apparently is used by something for Verizon (the TV STBs??), so you may need to create multiple forwarding rules. If you choose custom ports you can specify a range, which is really nice. This way all traffic except for port 4567 hits my router and either goes where I forwarded the ports to or goes nowhere as there is no service.
This setup should provide the best of both worlds. I say should as I yet have to test it for a while,but so far things are working out OK.
If you have your own wireless and don't need the wireless from the Actiontec then turn the wireless off on the Actiontec and detach the antenna.

Can you save your own theme and button set up so I can use the same format

Can you save your own theme and button set up, so I can use this same format for similar content. I want to keep the button content and the theme the same without having to create it everytime? I am trying to streamline the process for multiple dvd's with the same menu and buttons but different content. Does that make sense?

I am only new to this caper too, but I am pretty sure you can save a theme as a favourite by pressing the "save theme as favourite" button under file. If you have edited an existing theme but don't want to lose it, make sure you untick the replace existing button.

ICal: You must add your own card and email address in Contacts to be able to use mail alerts.

Problems with Mountain Lion. Have never had these problems previously. Have been a mac user since 1990.
iTunes no longer sends music to my airport express. NO FIX EXISTS !
Now iCal every time I want to send an email alert puts up this message: You must add your own card and email address in Contacts to be able to use mail alerts.
COME ON I HAVE DONE THIS OVER AND OVER TO NO RESULT.
MACINTOSH WHAT ARE YOU DOING?
UNHAPPY !

Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work.
Isolating an issue by using another user account
If the problem is still there, try booting into the Safe Mode. Shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal.
Safe Mode
Safe Mode - About
General information.
Isolating issues in Mac OS X
Troubleshooting Permission Issues
Step by Step to Fix Your Mac

You must add your own card and email address in Contacts to be able to use mail alerts. mean

I am trying to set up notifications in Calendars. I click "custom" and choose email. I get a message"You must add your own card and email address in Contacts to be able to use mail alerts." I have my own email address entered into Contacts, but don't know what this message intends, or how to deal with it. Please advise.
Thanks

Thank you Eric. So easy, when you know what you're doing.
Thanks.

I'm trying an email address i know is mine yet still getting this message:"That Apple ID is already in use.If this Apple ID was created by you, simply sign in with your Apple ID and password.If it does not belong to you, try again using a different name."

I keep getting this message: "That Apple ID is already in use.If this Apple ID was created by you, simply sign in with your Apple ID and password.If it does not belong to you, try again using a different name."
I'm trying to create a new id and e-mail using an e-mail address that is mine and has been mine for over a year - any ideas why this could be happening?

Trying where? What sort of email address? The following answer is based on a guess as to what you are talking about.
If you already have an @me.com address, perhaps as a result of having had a MobileMe account, and you are now setting up an iCloud account with an Apple ID you will find you will be asked to create a new @me.com address, and that you can't add your existing one because it is already an Apple ID.
You can do one of two things:
1. Sign out at System Preferences; sign in with your existing @me.com address and enable Mail.
2. Stay signed in with the present ID and add your @me.com address in System Preferences>Mail, Contacts & Calendars.
If you have further questions, or if your situation is different from what I've assumed, do please post back, but in a suitable forum - this one is specifically about using these Forums.

HT4913 i am trying to get my computer and my wifes computer on my itunes match. i did the add a computer function and it says that this computer is already associated with an apple id...if you use itunes match with your apple id etc for 90 days...please

i did the add a computer function and it says that this computer is already associated with an apple id...if you use itunes match with your apple id etc for 90 days...please explain. is this going to screw my wifes account up?

If you both have seperate iTunes Store accounts then basically, yes, it is going "screw up" your wife's account.
iTunes Match is designed as a single-user service which is associated with one and only one iTunes Store account ID. If you have subscribed on your account and want to activate the service on another computer that is already signed in with an account the present account must be signed out and then iTunes signed into your account. This means the other computer will have complete access to your account and will only be able to make purchases on your account. iTM is not designed to be signed in and out at will. If she has apps purchased with her iTunes Store account they will not be able to be updated.

What does it mean when you receive a text on your iphone 6 form your own number and the message is duplicated on each side (sent/recieved) and has "verizon message" with a long number at the end of the text, duplicated as well?

what does it mean when you receive a text on your iphone 6 from your own number and the message is duplicated on each side (sent/received) and has "verizon message" with a long number at the end of the text, duplicated as well?

Great question stacybrownie! Let's get to the bottom of this so that it's not a cause for concern. When a message is sent to/from your own number, it will display as one sent, one received. This makes it display two messages as you are seeing. Let's clarify the second part of your question. Where do you see "Verizon Message" exactly? What is the long number at the end of the text? When did this start and is it with all text messages or only this instance?
AdaS_VZW
Follow us on Twitter at @VZWSupport

My sons ipad uses my user name (i have an ipad and iphone). I want to set his up with his own username and password. How do i do that and can it be done without losing any of his apps, songs or video?

my sons ipad uses my user name (i have an ipad and iphone). i want to set his ipad up with his own username and password. How do i do that, and can it be done without losing any of his apps, music or video?

Go to http://appleid.apple.com.
To clarify, the mere act of changing the Apple ID on the device will not remove any content. But you cannot update the apps or re-sync them if they get deleted without the old Apple ID. It may be best to download them again with the new ID.

I have comcast as my email and my wife has uses the account with her own email address. I have my address book and she has hers. My problem is that my address book comes up on her ipad even when she's signed in to her account.

I have Comcast as my IP. My wife also uses my account with her own email address. I have my address book and she has hers. My problem is on her ipad, my address book comes up with her account. Any ideas on how I can get her address book on her account?

It sounds like you're both syncing with the same computer log-in so the sync mechanism thinks that you're one person. You need to set up separate computer log-ins so that you have separate iTunes operation.

TS2756 iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???

iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???
as i said i have two iphone 4S,,,,,
1st one --- has os 5.1
2nd one has os 6.0
i tried 2nd one with carrier reliance gsm nd it works with that personal hotspot setting using USB...
but i want to connect the first 4S with carrier TATA DOCOMO GSM but its not working with the same USB feature????
plz reply asap...!!!
thnxxx in advance!!!

If not this:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem.
Also heating sometimes works. See:
Why can't I select my wifi settings?
A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar
Then:
Does the iOS device connect to other networks? See other networks? If yes that tends to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Use Remote DVR With Your own Router And A Nim.

Similar Messages

Maybe you are looking for