Use remote panel on the web after bulid executable application(*.exe)

Dear All
i have a vi with using remote control on the web.
But how can i use remote control on the web after bulid executable application(*.exe)
maybe add someting to installer or ............

A simple search for "executable LabVIEW web" should generate some relevant results.
Try to take over the world!

Similar Messages

Labview w/ WebCam and Remote Access through the Web project

Hi there, I was wondering if someone can help me with my senior project.
I am planning on purchasing the NI Labview Remote Panel.
i want to be able to control Labview remote panel through the web.
Is it easy to build the NI Labview Remote Panel application on my own? I am still in college.
or
I can buy the NI Labview Remote Panel application for $309 and use the
applications to control my labview software through the web.
in that case, I was planning on writing a software to take USB camera and post it through the web.
what can i do with the usb camera?
can I change color? hear audio? is there anything that you guys can suggest me on doing if I get it to work with the web?
Please help...
Thank you in advance..
Best regards,
Krispiekream

duplicate post
Please stick to discussing this in one place

Opening a Remote Panel of the Top Level vi for an executable

Hello Everyone
I was wondering how you would open up a remote panel for the top-level vi in an executable?
I have created a LabVIEW application and have tested opening the remote panel when it is running in the full labview development suite - this all works fine. I simply go operate>connect to remote panel and enter the server address, the port (8000) and the vi name using the path "My Project.lvproh/My Computer/main.vi" format.
However, if I then build this application into an executable I do not seem to be able to open a remote panel - it might be that I am just entering the VI name incorrectly.
with VI name = "main.vi" or with VI name = "C:\builds\main.exe\main.vi" and the exe. running I get the error:
Connecting to remote panel server...
Requested VI is not loaded into memory on the server computer
However I am not sure how else I would enter it.
The main.ini has the following configuration:
server.app.propertiesEnabled=True
server.ole.enabled=True
server.tcp.acl="0800000008000000"
server.tcp.enabled=True
server.tcp.paranoid=True
server.tcp.port=6363
server.tcp.serviceName=""
server.vi.access=""
server.vi.callsEnabled=True
server.vi.propertiesEnabled=True
WebServer.Enabled=True
WebServer.TcpAccess="c+*"
WebServer.ViAccess="+*"
DebugServerEnabled=True
DebugServerWaitOnLaunch=False
Both machines have LabVIEW 2011 Profesional Development System SP1 on so I do not think it is a limited remote access licence issue.
Any suggestions as to where I am going wrong would be much appreciated.
Cheers
John
Solved!
Go to Solution.

It appears that you can infact use remote panels within an executable.
The problem I had was that I had left the web server port for the remote panels the same as the LabVIEW development environment. That meant that the main LabVIEW web server was getting in the way of the web server that was associated with my built application.
With the application's web server on a different port and the VI in memory (and the file in a library/directory external to the exe if it is not the top level VI), you just need to specify the VI name such as main.vi .
Solved!

How to display SubVI on secondary monitor using remote panels?

I am trying to have a SubVI called from a Main VI open on a secondary monitor. I am using Remote Panels to control my Main application, which is opened in a web browser on the secondary monitor. I have tried setting the VI Properties - Window Run-Time Position - Monitor to "1" and also tried setting this value programatically using the Front Panel Property Node but neither seems to work. My SubVI still appears on my primary monitor.
I'm using LV 8.6.1 RT and my application is running on a CRIO.
I'd appreciate any help.
Thanks
Dan
Solved!
Go to Solution.

Mike,
All the SubVI does is prompt the user for some text. The front panel is a simple string control. The SubVI is called from my Main application (not using VI Server) and I have the Window Properties for the SubVI set so that the front panel opens when called, and closes when finshed. The SubVI displays teh fornt panel when called but does not open a new browser window. I have attached the SubVI in case you want ot have a look.
Attachments:
New Name.vi ‏25 KB

Can I use my G5 on the web without antiviruses ?

Hi guys and girls,
Could you tell me if I can use my G5 on the web without antiviruses ?
If you are disagree, please tell me which antiviruses is the best for you ?
Thanks.
Philippe

Welcome to the Apple Discussion Forum!
Currently no internet virus protection is needed for Apple OSX. Using Safari or Firefox is the best way to access the internet.
In addition, make sure you download and install all Apple Security updates (from the Software updates tab). This will keep your MacOSX protection up to date. In addition, there are only three Anti-Virus software programs available from the Apple store, that alone will give you a clue to the need for them.
Regards,
Dave

Can multiple PCs access one remote panel at the same time?

I've written a program in labview 7.1 to monitor/control a labview application running in the test cell through Remote Panel. I and my coworker can remotely monitor and/or control this labview application individually. But if my coworker has the remote panel displayed on his PC and I try to get the remote panel on my PC, I get a labview error (63) as below:
"LabVIEW: Serial port receive buffer overflow.
LabVIEW: The network connection was refused by the server."
My question is: Can multiple PCs access one remote panel at the same time?
Thanks in advance!
Y

Sorry I wasn't clear. The remote panel license is separate from the number of LabVIEW development licenses. Pricing information on remote panel licenses can be found here.

I've bought 640 rubies pack and have used it. But the day after, my pack ran out. I'd appreciate if you could give me back my pack or help me in any way possible.

I've bought 640 rubies pack and have used it.
But the day after, my pack ran out.
I'd appreciate if you could give me back my pack or
help me in any way possible.
The Glu Customer Care answer my question;
Hello, and thank you for contacting Glu Mobile Customer Care
The game you mentioned does not save online. If you have made a backup using "iCloud" or "iTunes backup" then you may be able to restore to that last save point on your device which will include whatever you had for currency at the time when the save was created.
Unfortunately, we do not have a way to restore game progress, this is done by the user on the device itself using the backup and restore method for the entire device.
If you have not performed a backup save for your device before this problem happened and you have lost currency from purchases, please contact the iTunes store customer service to inquire about your purchase and request help regarding this loss of currency issue.. Apple does not allow developers to handle billing issues.
If you get an answer saying that In-App purchases are the responsibility of the developer, please insist that they assist you as we have no way of accessing their purchase records. We are the developer and do not have access to any account or billing information on the iTunes App Store.
We hope this information assists you and we sincerely apologize for the inconvenience.
Regards,
Glu Mobile Customer Care

We are fellow users here on these forums, you're not talking to iTunes Support. You say that you used the pack that you bought and that it then ran out - does that mean that you used it all up ? If you didn't use it all up but your game lost the purchase then you can try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Thinking of using Cinema 4D when the new After Effects / Cineware comes out?

Thinking of using Cinema 4D when the new After Effects / Cineware comes out? Thoughts of a C4D Newbie http://blogs.creativecow.net/blog/12786/an-editors-thoughts-on-being-a-maxon-cinema-4d-newbie

Good question. But I'm guessing seeing how the CEO wont even talk about any new products, and has basically said the focus right now is the OS and not the hardware wont get any answers, just theories.
Mine is I am guessing since all this will still be based off of webOS, apps will be backward compatible. But not forward due to hardware limits on older devices. So if you continue to have a Palm Profile you will always have access to those apps purchased. I could see the Palm Profile even being something transferable to other carriers like porting a number that way you can continue to keep those apps you have invested in. Just like the PalmOS was, even as new hardware came out you can even run those apps on the Pre via Classic emulator.

What is SM62 Tcode is used for? and the consequence's for executing it?

What is SM62 Tcode is used for? and the consequence's for executing it?
Thank you,
York

Hi Les,
You can goto this URL to understand more about events :
http://help.sap.com/saphelp_nw2004s/helpdata/en/44/c079239d3756a2e10000000a1553f6/frameset.htm
http://www.sapfans.com/sapfans/sapfaq/robert.htm
About my experience working with events:
In one of my BW Project: we were using AutoSys to do job scheduling (to run InfoPackages).
To automate the loading process we created events for each infopackage. Then in that Infopackage we used to select option "Start later in Background" and then select option "After Event". Then specified the event name and parameter.
Then in the same infopackage we selected button "Subsequent Process" the in that seelct option "Trigger Events" Here you can have options to specify if this event is successful then what next event to trigger and if this event fails what next event to trigger.
So this way we used to automate data loads.
This was dont caz there was no process chains concept during that time. So good example of events and event based process are PROCESS CHAINS.
Hope this helps !!
Assign points if helps !!
Regards,
Naveen Rao Kattela

File Dialog's using Remote Panels (via web server)

I am aware that the web server remote panel access will not allow us to open a file dialog box on a remote computer. I have read people comment that you should create your own file dialog box, using LabVIEW to use instead of the file dialog box.
Has anyone actually done this? I would like know if anybody has source code for this, rather than re-inventing the wheel. Also, will the sub-vi actually just appear on the webserver? i.e. will it actually work?
Thanks for any help
Slade

Hi Emilie,
I have a program that I run on an industrial PC, with no keyboard, video or mouse. We currently control the application using the web server. We have a button to load and a button to save settings. If the files are missing for the load & save, it pops up a file open dialog to choose the file to import. However, while we are viewing the page this way, these dialog boxes do not work.
I would like to know if anyone has made up a file dialog box that I could use, that would display correctly in the web server's remote control.
Regards,
Slade

Fire fox won't connect to the web after instaling an upgrade,, i uninstalled firefox and reinstalled it twice and no change, iam using expolorer to connect right now

firefox installed an up grade and than couldn't find a connection to the web,
my connection is working fine through explorer
i uninstalled firefox twice and reinstalled with no diffrience

I wound up just resetting the router and starting over. Still not sure how to get my FTP server going, but at least my Internet is back up. Thanks.

USING SSO TO SECURE THE WEB APPLICATION RUNNING ON JBOSS/WEBSPHERE

We are using Oracle portal for all our applications. We have Oracle Application Server, portal, SSO and OID installed. Basically the user should login through
protal, and the authentication is done by SSO against OID. After the authentication, the user accesses the portal home page. From the home page, there are application links. By clicking these application links, the user should be able to access the applications. But these applications are running on JBoss and WebSphere. Is there any way that we can secure these applications
by Oracle SSO?
I know that there is a plug-in (mod-osso) running on the Oracle Web Server to fulfill the tasks like directing the request to the single sign-on server,
authenticating, putting sso cookie into the session if authentication is successful. So the Oracle Web Server will take care of the authentication for all partner applications.
There is no such plug-in released for the web server of JBoss or WebSphere. Anybody has the experience or suggestion on how to solve our issue?
Thanks!

Hi,
Have you imported the java certificate into R/3 backend system ? if so.
Then just go to backend system and check on sm50 for each applicaion instance of any error eg.
SM50-> Display files (ICON) as DB symbol with spect.(cntrlshiftF8)
You will get logon ticket details.
with thanks,
Rajat

Is it possible to use Remote SharedObjects with the LCDS server?

Hello,
The ActionScript documentation for Remote SharedObject
RSOs are created using the static getRemote function. This returns a reference to an object that can be shared across multiple clients by means of a server, such as Flash Media Server. If the shared object does not already exist, this method creates one.
The following code shows how you assign the returned shared object reference to a variable:
var myRemote_so:SharedObject = SharedObject.getRemote(name, remotePath, persistence);After calling this method, use SharedObject.connect() to connect the object to the application server, as shown in the following code
var myNC:NetConnection = new NetConnection();
myNC.connect(“rtmp://[yourDomain].com/applicationName”);
var myRemoteSO:SharedObject = SharedObject.getRemote(“mo”, myNC.uri, false);
myRemoteSO.connect(myNC);
To confirm that the local and remote copies of the shared object are synchronized, use the sync event.
All clients that want to share this object must pass the same values for the name and remotePath parameters.
Is it possible to create RSO's using the LCDS server instead of the Flash Media Server? If so, how?
Thanks,
Oscar

Tom,
Thanks for your response. I decided to test this with the publish/subscribe messaging. Something I thought would work is not. Here is the simple example;
                var btn:Button = new Button();
                btn.label = "My Button ";
                msg = new AsyncMessage();
                msg.body = btn;
                producer.send(msg);
Simple right? Well, this generates a fault;
1/21/2011 10:37:55.462 [ERROR] mx.messaging.Producer 'D7094E2F-2CA1-39C0-1EC6-A9DE3171E836' producer fault for 'A11AE369-8349-8970-0C10-A9DE5113DA2E'.
The LCDS log gets into more detail, AMF Deserialization ERROR....
Please notice the use of Amf0 and Amf3 methods... I thought Amf0 was a thing of the past...
Any ideas? Please help....
[LCDS]01/21/2011 10:37:55.039 [ERROR] [Endpoint.RTMP] Deserialization failed for incoming data: Unknown AMF type '15'.
flex.messaging.io.UnknownTypeException: Unknown AMF type '15'.
    at flex.messaging.io.amf.Amf3Input.readObjectValue(Amf3Input.java:217)
    at flex.messaging.io.amf.Amf3Input.readObject(Amf3Input.java:130)
    at flex.messaging.io.amf.Amf3Input.readScriptObject(Amf3Input.java:437)
    at flex.messaging.io.amf.Amf3Input.readObjectValue(Amf3Input.java:152)
    at flex.messaging.io.amf.Amf3Input.readObject(Amf3Input.java:130)
    at flex.messaging.io.amf.Amf3Input.readScriptObject(Amf3Input.java:437)
    at flex.messaging.io.amf.Amf3Input.readObjectValue(Amf3Input.java:152)
    at flex.messaging.io.amf.Amf3Input.readObject(Amf3Input.java:130)
    at flex.messaging.io.amf.Amf3Input.readScriptObject(Amf3Input.java:437)
    at flex.messaging.io.amf.Amf3Input.readObjectValue(Amf3Input.java:152)
    at flex.messaging.io.amf.Amf3Input.readObject(Amf3Input.java:130)
    at flex.messaging.messages.AbstractMessage.readExternalBody(AbstractMessage.java:654)
    at flex.messaging.messages.AbstractMessage.readExternal(AbstractMessage.java:324)
    at flex.messaging.messages.AsyncMessage.readExternal(AsyncMessage.java:98)
    at flex.messaging.io.amf.Amf3Input.readExternalizable(Amf3Input.java:491)
    at flex.messaging.io.amf.Amf3Input.readScriptObject(Amf3Input.java:420)
    at flex.messaging.io.amf.Amf3Input.readObjectValue(Amf3Input.java:152)
    at flex.messaging.io.amf.Amf3Input.readObject(Amf3Input.java:130)
    at flex.messaging.io.amf.Amf0Input.readObjectValue(Amf0Input.java:123)
    at flex.messaging.io.amf.Amf0Input.readObject(Amf0Input.java:94)
    at flex.messaging.io.amf.AmfMessageDeserializer.readObject(AmfMessageDeserializer.java:227)
    at flex.messaging.io.tcchunk.TCCommand.readMessage(TCCommand.java:191)
    at flex.messaging.endpoints.RTMPConnection.serviceTCMessage(RTMPConnection.java:1024)
    at flex.messaging.endpoints.RTMPConnection.doRead(RTMPConnection.java:610)
    at flex.messaging.endpoints.RTMPProtocolHandler.doRead(RTMPProtocolHandler.java:125)
    at flex.messaging.socketserver.Connection$ConnectionReader.run(Connection.java:864)
    at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
    at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
    at java.lang.Thread.run(Thread.java:662)
Thanks,
Oscar

Can 2 remote panels control the same VI without right-clicking to get control?

Is it possible for multiple remote panels to be able to actively interface with a single running VI without having to manually request and release control by right clicking? I am using Labview 8.2 Professional Version.
Thanks for any help.

No. Only one client can control a remote panel at a time, see LabVIEW Help ->
"Controlling an Application or Front Panel Remotely Using a Browser"
You might create a copy of that VI and provide 2 web pages as a workaround.
Regards, Guenter

How can i install windows on new macbook air using remote drive on the bootcamp partition

Hi all, I just purchased a new macbook air mid - 2011 with OSX-Lion installed on it. I wish to install Windows XP on the boot camp partition but have not purchased the external super drive. Is there some way that I can install windows on boot camp using remote drive of my other macbook pro system.
If this is possible, then please guide me.
Thank you,

Since I do NOT use anything from M$, I am afraid I am not right person to help you.
I would suggest that you post your question for help over in the BootCamp forum loacted here
https://discussions.apple.com/community/windows_software/boot_camp
Allan

Use remote panel on the web after bulid executable applicatio​n(*.exe)

Similar Messages

Maybe you are looking for

Use remote panel on the web after bulid executable application(*.exe)