Use restore disc to check 2nd internal HD for errors or....?

I am just wondering if I can use Disk Utility to check the condition of my 2nd internal drive from my main HD, or if I have to use the system restore disk.
Also wondering if I can partition the 2nd drive from the other drive as well. Getting ready to upgrade to Leopard on late 2005 G5.

You certainly can. When you run DU, the available drives appear on the left. Select the drive you want to deal with, and proceed. And yes, partitioning is also okay.

Similar Messages

(Cisco Historical Reporting / HRC ) All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054

Hi All,
I am getting an error message "All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054" when trying to log into HRC (This user has the reporting capabilities) . I checked the log files this is what i found out
The log file stated that there were ongoing connections of HRC with the CCX (I am sure there isn't any active login to HRC)
|| When you tried to login the following error was being displayed because the maximum number of connections were reached for the server . We can see that a total number of 5 connections have been configured . ||
1: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:Current number of connections (5) from historical Clients/Scheduler to 'CRA_DATABASE' database exceeded the maximum number of possible connections (5).Check with your administrator about changing this limit on server (wfengine.properties), however this might impact server performance.
|| Below we can see all 5 connections being used up . ||
2: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:[DB Connections From Clients (count=5)]|[(#1) 'username'='uccxhrc','hostname'='3SK5FS1.ucsfmedicalcenter.org']|[(#2) 'username'='uccxhrc','hostname'='PFS-HHXDGX1.ucsfmedicalcenter.org']|[(#3) 'username'='uccxhrc','hostname'='PFS-HHXDGX1.ucsfmedicalcenter.org']|[(#4) 'username'='uccxhrc','hostname'='PFS-HHXDGX1.ucsfmedicalcenter.org']|[(#5) 'username'='uccxhrc','hostname'='47BMMM1.ucsfmedicalcenter.org']
|| Once the maximum number of connection was reached it threw an error . ||
3: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:Number of max connection to 'CRA_DATABASE' database was reached! Connection could not be established.
4: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:Database connection to 'CRA_DATABASE' failed due to (All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054.)
Current exact UCCX Version 9.0.2.11001-24
Current CUCM Version 8.6.2.23900-10
Business impact Not Critical
Exact error message All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054
What is the OS version of the PC you are running and is it physical machine or virtual machine that is running the HRC client ..
OS Version Windows 7 Home Premium 64 bit and it’s a physical machine.
. The Max DB Connections for Report Client Sessions is set to 5 for each servers (There are two servers). The no of HR Sessions is set to 10.
I wanted to know if there is a way to find the HRC sessions active now and terminate the one or more or all of that sessions from the server end ?

We have had this "PRX5" problem with Exchange 2013 since the RTM version. We recently applied CU3, and it did not correct the problem. We have seen this problem on every Exchange 2013 we manage. They are all installations where all roles
are installed on the same Windows server, and in our case, they are all Windows virtual machines using Windows 2012 Hyper-V.
We have tried all the "this fixed it for me" solutions regarding DNS, network cards, host file entries and so forth. None of those "solutions" made any difference whatsoever. The occurrence of the temporary error PRX5 seems totally random.
About 2 out of 20 incoming mail test by Microsoft Connectivity Analyzer fail with this PRX5 error.
Most people don't ever notice the issue because remote mail servers retry the connection later. However, telephone voice mail systems that forward voice message files to email, or other such applications such as your scanner, often don't retry and
simply fail. Our phone system actually disables all further attempts to send voice mail to a particular user if the PRX5 error is returned when the email is sent by the phone system.
Is Microsoft totally oblivious to this problem?
PRX5 is a serious issue that needs an Exchange team resolution, or at least an acknowledgement that the problem actually does exist and has negative consequences for proper mail flow.
JSB

History report error: | An Exceptional Error occurred. Application exiting. Check the log file for error 5022

Hi all
I've got a error msg when try to generate a report using Cisco history report tool:
Error | An Exceptional Error occurred. Application exiting. Check the log file for error 5022
It only happens when choose report template: ICD_Contact_Service_Queue_Activity_by_CSQ_en_us.
User tried samething on other PC, it working fine.
only on user' own PC and only choose this report, error appears.
user runing windows 7 and do not have crystal report installed
tried reinstalled the software, doesn't work.
also tried this: (https://cisco-support.hosted.jivesoftware.com/thread/2041254) - doesn't work
then tried https://supportforums.cisco.com/docs/DOC-6209 - doesn't work
attached the log file.
thanks.

wenqianyu wrote:From the log file:Looks like you get a Login Window.Error message showed up after username/password be enteredThere is an error in the log: Error happened in comparing UCCX version and HRC versionYou may need to do a clean uninstall, download the Historical report from the server, and install it again on the PC.Does this only happen to one PC or to every PC with this application?Wenqian
I have completely uninstalled the HRC, and download from server install again -- still doesn't work with exactly same error.
this matter only happens on this PC, when user try same thing on other PC, it works.
so i think it not relate to server or account.

My satelite L455-S5975 will not restore using restore discs Help please

I have a L455 that I tied to restore to the out of box state using the internal restore partition.
After starting the process mid way I received a fatal error message and the computer now doesn't reboot past the windows 7 icon before displaying another error message and only allowing me to shut the system back down.
I called the help line and they said it sounded like my hard drive crashed. I then ordered the restore discs from Acclaim and was told that after installing a new hard drive these discs would get the system back up and running and back to factory out of box status.
I ran the discs and towards the end of using the second recovery disk I received another error.
this was using the new hard drive.
I tried this twice and it didn't take.
I then put the old hard drive back in and started the restore process again.
I received this error mid way through the second disk.
10-FC12-0241
after selecting the o.k button to shut down I received this error
F3-F200-0002
again I selected the o.k. button to shut down and it did but still will not start up past the windows 7 logo.
Any idea what the issue is or what the error codes mean so that I can get the computer back up and running.
Thanks
Jason

Assuming your install media isnt damaged and your hard drives are good, in order of most problematic to least, you could have an issue with your motherboard, CPU, RAM, or optical drive.
Optical drive: attatch an external optical drive (USB) and try to install from there.
RAM: If you have multiple DIMMs, pull all but one and see if it goes. If it still doesnt work, try the other one.
If you only have one DIMM module then you can either swap it out or run a full memory test using MEMTEST86.
CPU: Obtain a replacement CPU and replace it.
Motherboard: time to buy another computer.

Target Disc Mode on 2nd internal drive

I'm migrating from a PowerMac G4 to a Mac Pro. How do I get my samples drive ( a second SATA internal drive) to appear on my desktop? as it contains all of my plugins and audio samples...
Ben

Sorted!

Checking a CDR master for errors using phase cancellation

Hi,
Can anybody shed some light on this conundrum?
Scenario. I have mastered an album in waveburner ( 1.5.2), I bounce the project which produces a waveburner session with one audio file with all the pq codes etc. This file is a 16 bit aiff file. Burn a cdr master from this bounced session. Copy the aiff files from the audio cdr
Take this audio file ( open the waveburner session package, goto audio folder and copy it out), put this audio file into logic 8 ( or another sample accurate daw), onto a stereo track. Now on a second stereo track in logic, lay up the tracks taken from the audio cdr against the bounced file from waveburner, you can zoom in to logic down to samples and make sure the audio is entirely in sync. Put an phase invert plugin on one of the stereo tracks. Theoretically I would have thought there should be 100% cancellation. all music disappears but there is a type of residual noise. If you look closely at the waveforms they are ever so slightly different, almost not visible.
Does anybody have a suitably technical explanation as to why this should be the case?
I am still to do a sine wave sweep check to see what happens with this.

As I explained, I am comparing the bounced waveburner project audio file, with the imported audio file from cdr. Therefore, theoretically the data should be 100% the same, so a phase invert should totally cancel. As far as I am aware the burn process should not send the data through any phase or level change processes.
Absolutely! 2 separate bounce and burn processes do produce a much bigger difference file, which is what you would expect, the same as 2 bounces with dither will not totally phase cancel, in fact this is also the case with some reverbs.

How to check a PDF file for errors?

I have created a PDF file manually. Adobe Reader shows an error message "The file is damaged but is being repaired." when I try to open this file.
How can I check, what is wrong with this file? Is there any checker or some way to examine the file and find an error line?

As of late 2009, there now IS a server-based PDF file checker. It's called pdfHarmony, and it uses the Adobe PDF Library to open and check PDF files, reporting the warnings and error messages that an Adobe Reader user would encounter.
Duff Johnson
Appligent Document Solutions (makers of pdfHarmony)
http://www.appligent.com

TS3899 "cannot get mail" in iphone5 suddenly. been using iphone to check 2 email accounts for months now, one is gmail and not troubled. the other is thunderbird and i get this error message now. no settings have been changed or anything! ideas?

hey all, I have been getting the "cannot get mail" error message on my iphone5 suddenly.
ive been using iphone to check two email accounts for months now, one is gmail and not troubled. the other is mail from thunderbird and i get this error message now saying it is not responding. no settings have been changed or anything, it just suddenly stopped receiving mail on my device as of Tuesday afternoon.
Does anyone have iny ideas about why? i have yet to update to the new OS7 yet, could that be it?

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Disk Utility wont copy TimeMachine to new Drive using Restore

I'm trying to transfer my TimeMachine backups to a new firewire 800 drive from an old USB2 one. Having read the advice on here, I've tried to copy across the drive using restore. Disk Utility thought about it for 4 hours or so and then gave me the finger. So what do I do please?

What TO do. Not what do.

FM used for error log

Hi experts,
I would like to ask if you happen to kmow an alternative FM to 'SMPO_DISPLAY_MESSAGES'.
The thing is I'm using error log in my program and I configure it so that there is just a pushbutton in the ALV. Once the button is pushed, the error encountered in the execution of the program will show.
Using FM 'SMPO_DISPLAY_MESSAGES' would show the pop-up for errors while executing the program and not after execution.
If you happen to know any alternative for this FM, it would really help.
Thanks in advance.
Jen

Use below FMs
BAL_LOG_CREATE
BAL_LOG_REFRESH
BAL_LOG_MSG_ADD
BAL_DSP_LOG_DISPLAY
reward if useful

Could not connect to wicd's D-Bus interface. Check the wicd log for er

Having issues getting wireless to work on Acer V3 551. Wired works great. I'm new to Arch from Ubuntu, so please be nice to me
On startup, I get two error dialog boxes:
#1: Could not connect to wicd's D-Bus interface. Check the wicd log for error messages.
#2: The wicd daemon has shut down. The UI will not function properly until it is restarted.
Network info:
23:01:00.0 Ethernet controller: Qualcomm Atheros AR8151 v2.0 Gigabit Ethernet (rev c0)
24:02:00.0 Network controller: Atheros Communications Inc. AR9462 Wireless Network Adapter (rev 01)
wicd-curses terminal output:
wicd-curses
Can't connect to the daemon, trying to start it automatically...
Traceback (most recent call last):
File "/usr/share/wicd/curses/wicd-curses.py", line 1043, in <module>
setup_dbus()
File "/usr/share/wicd/curses/wicd-curses.py", line 1031, in setup_dbus
dbus_ifaces = dbusmanager.get_dbus_ifaces()
File "/usr/lib/python2.7/site-packages/wicd/dbusmanager.py", line 36, in get_dbus_ifaces
return DBUS_MANAGER.get_dbus_ifaces()
File "/usr/lib/python2.7/site-packages/wicd/dbusmanager.py", line 62, in get_dbus_ifaces
if not self._dbus_ifaces: connect_to_dbus()
File "/usr/lib/python2.7/site-packages/wicd/dbusmanager.py", line 48, in connect_to_dbus
return DBUS_MANAGER.connect_to_dbus()
File "/usr/lib/python2.7/site-packages/wicd/dbusmanager.py", line 79, in connect_to_dbus
proxy_obj = self._bus.get_object("org.wicd.daemon", '/org/wicd/daemon')
File "/usr/lib/python2.7/site-packages/dbus/bus.py", line 241, in get_object
follow_name_owner_changes=follow_name_owner_changes)
File "/usr/lib/python2.7/site-packages/dbus/proxies.py", line 248, in __init__
self._named_service = conn.activate_name_owner(bus_name)
File "/usr/lib/python2.7/site-packages/dbus/bus.py", line 180, in activate_name_owner
self.start_service_by_name(bus_name)
File "/usr/lib/python2.7/site-packages/dbus/bus.py", line 278, in start_service_by_name
'su', (bus_name, flags)))
File "/usr/lib/python2.7/site-packages/dbus/connection.py", line 651, in call_blocking
message, timeout)
dbus.exceptions.DBusException: org.freedesktop.systemd1.LoadFailed: Unit dbus-org.wicd.daemon.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.wicd.daemon.service' for details.
systemctl status dbus-org.wicd.daemon.service terminal output:
dbus-org.wicd.daemon.service
Loaded: error (Reason: No such file or directory)
Active: inactive (dead)
I've tried:
- beginners install suggestions
- arch wicd suggestions
- unin/re-installing wicd
- google research to no avail

Apologies. First post to the board - will keep post within bracket tags. Sorry for being such a noob.
Input
$ systemctl status wicd.service
Output
wicd.service - Wicd a wireless and wired network manager for Linux
Loaded: loaded (/usr/lib/systemd/system/wicd.service; disabled)
Active: failed (Result: exit-code) since Wed 2013-05-01...
Process: 972 ExecStart=/usr/sbin/wicd --no-daemon (code=exited, status=1/FAILURE)
Starting Wicd a wireless and wired network manager for Linux
It seems like the daemon is already running
If it is not, please remove /var/run/wicd/wicd.pid and try again.
wicd.service: main process exited, code=exited, status=1/FAILURE
Failed to start Wicd a wireless and wired network manager for linux.
MESSAGE=Unit wicd.service entered a failed state.
Any thoughts?
Last edited by roastymctoasty (2013-05-01 15:58:17)

Can I use another Mac's system restore disc on my Mac?

Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
Q. Can I use the grey coloured System Restore discs that shipped with Mac A to install OS X onto Mac B?
A. In most cases, due to technical and licensing reasons, the answer is no. The answer is definitely no if any of the following apply:
Any part of the software on the system restore disc is currently installed or in use on Mac A, or on any other computer1
The OS on the disc is any version of Leopard (10.5.x), or is any version of Tiger later than 10.4.42
Either of the two Macs has an Intel processor3
The system restore discs from Mac A contain an older version of Mac OS X than the version of Mac OS X that was on the install discs that would have shipped with Mac B4
However, an installation attempt may be successful, and compliant with all OS X licensing terms, if all of the following conditions are met:
No part of the software on the system restore disc is currently installed or in use on Mac A, or on any other computer1
The OS on the disc is Tiger 10.4.3 or earlier, or is an earlier version of OS X (10.3.x, 10.2.x, etc)2
Both Mac A and Mac B have PowerPC processors (G3, G4, or G5)3
The system restore discs from Mac A contain a newer version of Mac OS X than the version of Mac OS X that was on the install discs that would have shipped with Mac B4
All terms of the Mac OS X Software License Agreement are followed, particularly sections 2 and 3 regarding permitted usage and transfer.
Even if all the above conditions are met, software restore discs contain computer-specific releases of Mac OS X, and may not install or work properly on a Mac that has a hardware configuration that is significantly different than the original.
Notes
The license agreement for single user copies of all versions of OS X, including all versions that ship on system restore discs, do not permit any part of the software to be installed or used on more than one computer at the same time.
The provision restricting the use of grey coloured system restore discs to the same Mac with which they shipped was introduced with the 10.4.4 Software License Agreement, and has been carried through to the 10.5 Leopard Software License Agreement. This restriction was not present in the Software License Agreement for earlier versions of Tiger, nor for earlier versions of Mac OS X.
All Macs with Intel processors shipped with a Mac OS X EULA restricting usage of the software restore discs to that Mac only. The license that shipped with G3, G4, or G5 Macs that shipped with 10.4.3 or earlier permit the transfer of OS X to another Mac, provided that all terms of the license agreement are followed. Furthermore, the architecture of PowerPC and Intel systems are incompatible enough that neither platform's system restore discs will install on the other.
Mac OS X system software will not properly run on, and may not even install on, any Mac that is newer than it, because the software lacks the hardware drivers to run properly on the newer hardware. Details are in this document: http://support.apple.com/kb/HT2186
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

Gray Install Discs are Machine specific, so even if both were Intel iMacs they'd have to be the same Models.
Leopard 10.5.x is another possible option besides Tiger/10.4.x.
Tiger Requirements...
To use Mac OS X 10.4 Tiger, your Macintosh needs:
* A PowerPC G3, G4, or G5 processor
* Built-in FireWire
* At least 256 MB of RAM (I recommend 1GB minimum)
* DVD drive (DVD-ROM), Combo (CD-RW/DVD-ROM) or SuperDrive (DVD-R) for installation
* At least 3 GB of free disk space; 4 GB if you install the XCode 2 Developer Tools (I recommend 20GB minimum)
http://support.apple.com/kb/HT1514
See Tom's, (Texas Mac Man), great info on where/how to find/get Tiger...
http://discussions.apple.com/thread.jspa?messageID=9755670&#9755670
Or Ali Brown's great info on where/how to find/get Tiger...
http://discussions.apple.com/thread.jspa?messageID=10381710#10381710
Leopard requirements/10.5.x...
* Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
minimum system requirements
* 512MB of memory (I say 2GB at least)
* DVD drive for installation
* 9GB of available disk space (I say 30GB at least)
You have to call Apple & likely ask for a Product Specialist to get it, if they still have it!

TS1367 I have MacOS 10.5.8. It is not booting. It stops at the blue screen. I used the disc utility - verify disc. I get the following message - Invalid sibling link. Volume check failed. Error: Filesystem verify or repair failed. Please give a solution a

I have MacOS 10.5.8. It is not booting. It stops at the blue screen. I used the disc utility - verify disc. I get the following message - Invalid sibling link. Volume check failed. Error: Filesystem verify or repair failed. Please give a solution anybody?

Many times I tried to simply update from 10.5.8 without any success. It starts and after few minutes ...
I used many different install disks (I bought ofiicial release from Mac seller), so I think this is not a problem with wrong version or bad install disk. A few days ago I've got back my computer from Apple technical support and technician told me he had this same problem with system installation

Restore Keychain from Macbook 3.1 to Macbook Air using Backup disc

I recently bought a refurbished Macbook Air (early 2014 model) to replace a late 2007 MacBook 3.1 and I am not able to use restore from a backup disc because the backup “was created on a different model of Mac.” I would like to transfer the data in the Keychain file on the Macbook 3.1 to the Keychain file on the Macbook Air. Suggestions greatly appreciated as I am currently manually transferring the Keychain data which is error prone and time consuming.

Try these steps:
1. Go to the Library on your old Mac and locate the Keychain folder
2. Open this folder and select the 'login.keychain’ file
3. Control-click on this file and choose Share
4. In the list of options, choose any of the methods you like
5. After you receive your keychain file, open Keychain Access on your new computer
6. Select File - Add Keychain and locate the 'login.keychain’ file from your old Mac

Can i use time machine instead of restore discs

alright so i bought a g4 imac 1.25 ghz 1 gb ram, and it has leopard on it right now from the previous owner. i have the panther restore discs but id rather have leopard. so my question is if i use the restore discs on my mac mini(new 09 model, leopard) and restore it to new then can i use time machine on my external hard drive and then plug it into my imac and use that data and make the imac with a fresh install of leopard? sorry if its hard to understand it is hard for me to describe. please help! thanks

John.Kitzmiller wrote:
Time Machine backups are not necessarily computer specific, however TM does not back up the OS
Yes, it does, unless you've specifically told it not to. That's how you can do a full restore of an entire system from a TM backup, even if it's a previous version of Leopard.
, so there's really no way to do what you're trying to accomplish.
That's not the practical issue. As pointed out earlier, the practical issue is, the TM backup for one type/model of Mac won't run on another, as the hardware drivers, etc., are different. Worse, the 2009 Mac Mini has an Intel processor; a G4 has a PPC processor.
Plus as already pointed out, it would be a violation of the EULA.
Correct.

Use restore disc to check 2nd internal HD for errors or....?

Similar Messages

Maybe you are looking for