Use same external drive for 2 computers

On my desk top I use an external hard drive to store my pictures. It is named local disk (m:). I want to work on pictures with my laptop, but when I connect external drive to laptop, is named local disk (f:). LR does not recognize this drive. I want to switch back and forth between desk top and laptop.
Any ideas?

Ha! Sorry...wrong link (right link, actually, wrong thread).
You can just map the drive with explorer, or you can use disk manager to make the drive letter what you want it to be. Lastly, you can use a batch file and the SUBST command to map the drive.

Similar Messages

  • Use same external drive for itunes in mac and windows?

    Hi,
    I have a Macbook Air that has bootcamp and I use 99% of my time under Windows 7.
    All of my music and movies are on an external hard drive and I have a problem using
    it for iTunes under Windows and the Mac at the same time.
    Is it possible to have both versions point to the same external drive?
    I tried almost everything but it fails as the file paths are stored once and for all in
    the iTunes library file.
    When booting under OS/X and opening iTunes, it loads the .itl file and shows all music
    but of course it doesn't see anything since the path under OS/X has nothing to do with
    the one under Windows.
    My iTunes lib was created under Windows and all files are stored in a variation of:
    J:\Private\My Music\iTunes[Rock | Classical | Soundtracks]
    Under OS/X of course the path is totally different:
    /Volumes/DRIVE_J/Private/My Music/iTunes/[Rock | Classical | Soundtracks]
    Now if I reimport everything in iTunes for OS/X it will change all the paths and then
    Windows will not be able to fetch the files.
    Isn't there a way to have relative paths so both the OS/X and Windows versions
    of iTunes work flawlessly without caring at all about which OS is running?
    This is driving me nuts.
    I'm not talking about Sharing an iTunes library over a network. I want to share the
    same physical folder between Windows and OS/X
    Thanks for any help.
    Steve

    Anyone?

  • Using same External drive for iMac and iBook

    Hello all,
    I have a 15" FP iMac 10.2.8 and iBook 10.3.9 and a wireless Linksys router which is about 4-5 years old. All work on the Linksys network. Currently my LaCie external is hooked to the iMac.
    I want to have my external LaCie accessible to both computers for storing Final Cut video files. Is this as simple as connecting the LaCie to the router? I can connect to the LaCie via the ibook through the wireless network now but for accessing video files I assume this is not sufficient; need a physical connection.
    Thanks,
    Al

    You'd get problems. The ports are equal though. 
    http://www.macintouch.com/readerreports/firewire/topic2199.html
    You could connect an Ethernet-based Hard Disk to the router but it's going to be pretty slow compared to the Firewire connection you're accustomed to. If I were you I'd just hot-swap the Firewire drive between the two Macs.
    mrtotes

  • I'm having a problem with using an external drive for my iTunes media

    I recently switched to using an external drive for my iTunes library and I was able to switch everything fine. I was able to get iTunes to download and new TV shows, videos, and music that I purchased from the iTunes store to the iTunes folder on my external drive but I can't get it to do the same for applications. All my applications are still being used through the iTunes folder on my internal drive and new ones that I download get put in that folder too. How can I set it to get iTunes to put new applications and use the existing application files from my external drive?

    There is a Windows based utility that will allow one to change the location of the 'My Music' folder, but you appear to be running a Mac.
    You may find more appropriate help in the iTunes for Mac Discussions.
    If you are running Windows, post back and some info can be provided.
    Best of Luck

  • I have the G Drive 1 TB (GEN4 1TB) external drive purchased in 2010. I need to connect to my new MacBook Pro. I'm using the external drive for media storage of my video editing projects. Will a 800fw to thunderbolt adapter cable work?

    I have the G Drive 1 TB (GEN4 1TB) external drive purchased in 2010. I need to connect to my new MacBook Pro. I'm using the external drive for media storage of my video editing projects. Will a 800fw to thunderbolt adapter cable work? I understand that using a USB port connection is not fast enough for video editing. I read somewhere the G Drives don't connect well to MacBook Pro.
    thanks
    larry

    I doubt this can be relocated or moved so you might want to just repost in the macbook pro area.
      MacBook Pro
    https://discussions.apple.com/community/notebooks/macbook_pro
    https://discussions.apple.com/community/mac_os?view=discussions
    Can you afford a new Thunderbolt case and cable? any case with FW800 is going to be slow 72MB/sec and less, and any new 1TB drive is capable of 75MB/s minimum up to 125MB/sec.
    Thunderbolt storage can of course when setup properly reach 100's of MB higher using multiple drives.
    Use what you have for a system backup or for secondary backup storage.
    you might be able to take the drive - most cases allow you to open and swap drives - and use this:
    G-Technology 1TB G-DRIVE mini High-Speed Portable Hard Drive                                   
    or this:
    http://store.apple.com/us/product/HB137VC/A/g-technology-4tb-g-raid-professional -high-performance-dual-drive-hard-drive?fnode=5f

  • Using an External Drive for Time Machine and Other Things

    I have a 2TB external drive which I use for Time Machine Backups on my 2 macs. The macs have HDs of 500GB and 160GB so the external drive has ample space for backups.
    Is it okay to use the external drive for other things that I don't care if they aren't backed up (like digital copies of DVDs)? i.e. Will Time Machine cause any issues if a drive is used for more than just Time Machine backups?

    rgraves wrote:
    I have a 2TB external drive which I use for Time Machine Backups on my 2 macs. The macs have HDs of 500GB and 160GB so the external drive has ample space for backups.
    Maybe. See #1 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum).
    Is it okay to use the external drive for other things that I don't care if they aren't backed up (like digital copies of DVDs)? i.e. Will Time Machine cause any issues if a drive is used for more than just Time Machine backups?
    It's best to put such things in their own partition. See #3 in the FAQ.
    You may also want to make separate partitions for each Mac's backups, if you're backing-up either one directly (ie, not over your network). See #4 in the FAQ.

  • I've used an external drive for time machine which has important files on it. After trying to back up my computer, it suddenly needed to be "repaired" by utilities. Now it's not being "seen" at all! How do I recover my important files off the drive?

    I've used an external drive for time machine which has important files on it. After trying to back up my computer, it suddenly needed to be "repaired" by utilities. Now it's not being "seen" at all! How do I recover my important files off the drive?

    If the external drive can be seen at all in Disk Utility, follow the instructions for repair here.

  • HT3275 I am using an external drive for backup. I am now getting a message that the drive needs a disk repair, but when I run disk repair it  just seems to freeze.

    I am using an external drive for back up. Yesterday the backup failed and I received a message that the external drive( a passport drive) needed a 'disk repair", when I ran disk repair nothing happened it seemed to freeze. Suggestions? should i simply erase the external drive and start over-my computer is fine.

    Get a different drive for backup.
    In the meantime, once you are backed up some drive safe, then you can attempt to repair the backup drive using the repair the directory link.

  • Going from xp to windows 7 64 bit using an external drive for music storage

    Greetings Techies!
    I hope you all are well.
    I need to move my iTunes from an XP machine to Windows 7 64 bit. On the XP machine I am using an external drive for music storage and the iTunes database is stored on the internal drive. I am looking for advice on how to transfer all of this over to my new Windows 7 64 bit machine. I know iTunes can be picky about everything and I don’t want to take and chances and loose my playlists or music.
    Any help would be much appreciated.
    Blessings,
    paul

    You are right about it being picky. I just upgraded from Vista to Windows 7 and was forced to format my drive. I had all the music backed up, but when I imported it, I have 2 or 3 copies of some songs, art work missing, and have lost my playlists. I hope someone responds to your question, because I could use similar help! Best of luck to ya . . .

  • I would like to use an external drive for the iPad I just purchased for my husband?  How can I accomplish this is there an accessory that would allow me to use a USB

    I would like to use an external drive for storage on the ipad I just purchased.   How can I do this?

    You can't attach drives to any iOS device.
    Having said that, there are some drives with built-in wifi routers that a device can connect to.  These would behave like a cloud device in which some of your apps might be able to connect.
    Try googling to find some brands.

  • Two computers using same external drive with TM?

    This will probably display my ignorance, but my daughter just got a macbook with leopard installed, and I'm planning on upgrading to leopard on my iMac.
    So long as it has enough gigs, can I purchase only one external drive and use TM to back up both computers to the same external drive?

    Definitely yes.
    That's what I'm doing. I have a 250GB external drive connected to my iMac, and this drive hosts the TM backup of the imac and of my 2 macbooks.
    The drive is always physically connected with the iMac. Macbooks backup over network. Setup is easy too: first make sure your laptop can see the backup drive as a network share. Then set it as the TM drive. That's it.
    The only issue I found is that somehow my macbooks don't do automatic backups every hour no matter how I configure it. I have to right-click on TM icon and choose "backup now". This is yet to be figured out. Other than that, everything is great.

  • Can i use my external drive for TM and files i don't want on my mac HD

    my hard drive has a total of 232.57g which is not nearly enough space to save all my pictures, movies, etc. i've been using a 300g external drive to save my pictures, movies, etc. which is now full so i bought a maxtor one touch 4 750g to hopefully back up my computer using time machine, my 300g external drive, and whatever new pictures, movies, etc.
    if i set up my new external drive for time machine can i still put the pictures, movies from my 300g external drive and whatever new pictures, movies, etc. on my new 750g external drive?
    do i need to make a partition? if so can you tell me how?
    should i not use time machine?
    any information is appreciated

    mac HD
    capacity: 232.57g
    available: 170.29g
    iomega
    capacity: 298.02g
    available: 14.29g
    one touch 4
    capacity: 698.51g
    available: 698.36g
    thanks for the quick reply but i need to explain it better or ask, once all is backed up from my mac HD and my iomega external drive to my new one touch 4 i want to stop using the iomega since there isn't much room left on it
    will i be able to add files directly to the one touch 4 without having those files saved to my mac HD like i do now?
    or will TM remove my files the next time it backs up my mac HD since i won't have the iomega on anymore?

  • How do i use an external drive for iphoto library

    I am looking to use an external drive to store my photo library.
    Tips

    Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
    And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
    And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
    LN

  • Can I use an external drive for a 2nd time capsule backup?  Other questions too

    My setup:
    1 Macbook Air
    1 Mac mini as HTPC
    1 Mac mini as a media server (5tb and growing) with external drives.
    I want to get a 2tb time capsule to back up my laptop and mac mini that i use as a HTPC.  Simple enough....
    Since the new gen airport extremes support external drives to a time machine back up i want to plug a CineRAID device with 4 6TB drives (12gb of storage in a RAID) and use that as a backup for my media server.  Could I just plug it directly into the mac mini?  Yes, but i am trying to have the lest amount of clutter possible visible. So i want to put in a closet where my router is..
    So can I plug in the CineRAID into the usb port for a 2nd time machine backup with massive storage?
    Option 2: 
    Just get an airport extreme and use the CineRAID for a backup via USB...
    Also,  how much space does the airport extreme support?  Like i said up time I am at 5tb but its growing fast

    So can I plug in the CineRAID into the usb port for a 2nd time machine backup with massive storage?
    There is conflicting advice about whether a RAID setup will work with Time Machine, so you can find information that will say that it will work and other info that will say that it will not. In general, Apple says that Time Machine must "see" the RAID drive as a single partition, but they also say that you need to check with the support folks at the drive manufacturer for more details.
    The only way that you will know whether it will work or not on your network, is try it out on your network.
    Please let us know about your results.
    Just get an airport extreme and use the CineRAID for a backup via USB...
    Same as above.
    how much space does the airport extreme support?
    The firmware on an AirPort Extreme will support up to a 4 TB drive, but I have not tried it on a larger drive, so we'll need another user to answer on that one. Here again, it would be wise to try a few "tests" before you try to backup or transfer a large amount of data.

  • Can I use same USB drive for Intel and PPC backup?

    Hi, I have a USB hdd that was used for TV recording but failed on that so I reformatted it as Mac OS extended journaled with 6 partitions (GUID), and using SuperDuper, cloned Lion from a Macbook Air and Tiger from my eMac into different partitions, with the idea of using it as an extra backup.
    Tested the USB drive on Disk Utility verify disk function and it said all 6 partitions appear OK. Can boot the MBA from the USB drive (although slow) but the eMac does not show the disk image on the USB drive as an optional restart item.  I have eMac backed up on a separate Firewire drive but would like to use the USB drive as a second line of defense.
    My question is, would I be able to restore from the Tiger dmg on the USB drive, given that it is GUID and not Apple partition scheme. Would I have to reformat it to Apple partition scheme. Also, how would you go about a restore  from the USB drive if the eMac's OS was kaput?

    You can't store a clone of an Intel-based Mac and a clone of a PowerPC-based Mac on the same drive.
    That's because an Intel-based Mac can start from a GUID partition table, but a PowerPC-based Mac can only start if your USB drive is using Apple Partition Map instead of GUID. In your case, you have to buy another external drive to make a clone of the PowerPC-based Mac or the Intel-based Mac.
    To change the partition map of your USB drive:
    1. Open Disk Utility (it's in Applications > Utilities folder), and select your USB drive in the sidebar.
    2. Go to Partition tab, and press "Options" button, where you can choose the partition map you want: GUID, MBR or Apple Partition Map. Note that you won't be able to start an Intel-based Mac from a drive that uses Apple Partition Map

Maybe you are looking for

  • Error Message 1316 while uninstalling Java 2 Runtime Env SE v1.4.2_03msi

    I recently updated to Java 10 while in the process of clearing some nasty virus/malware off my system. I worked with a tech guide to do the clean up. He told me to uninstall old updates, including Java 2 Runtime Environment, SE v1.4.2_03. In the proc

  • Issue with sending an image in the body of email using SAP ABAP

    Hello All, We have a requirement to send an email to our external clients that contains an image in the body of the email. We are using cl_bcs class in ABAP to send the email and the mail is sending in html format. We have uploaded the image in the S

  • CS5 cannot support nVidia and ATI cards in same machine?

    Until recently, I was operating fine with a Radeon HD 5750 on dual monitors.  I wanted to add and utilize a third monitor (had some trouble with the DisplayPort output), so I just stuck in an off the shelf nVidia 8400 card. With the latest drivers on

  • Having trouble connecting Brio 6.5.0.47 report to Sybase 12 datasource

    I am a developer trying to connect a new BRIO 6.5.0.47 report to a Sybase 12 database.When we attempt to create a Brio Connection file to the Sybase 12 database, we receive a message that the "Open Client" has not loaded successfully. I can connect t

  • Help needed- Reg: Display page number in SQL Reports

    Hi, I need to display page number in " page no: X of Y " format where X is current page & Y is total number of pages. Now I am able to display only the current page using ' sql.pno '. but not able to display in ' X of Y ' format. Any inputs in this r