Use - SAV file for rpd

Hi,
What is the use of SAV file for rpd ?
Thanks,
Satheesh

Hi,
File gets created when rpd is in online mode.
When we open rpd in Online mode a dialogue box pops up saying “rpd is available in read-only” mode, Such cases to avoid this error we delete .log and .sav in repository directory and restart services.
Regards,
Srikanth

Similar Messages

  • Steps to load the data by using flat file for hierarchies in BI 7.0

    Hi Gurus,
    steps to load the data by using flat file for hierarchies in BI 7.0

    hi ,
    u will get the steps int he following blog by Prakash Bagali
    Hierarchy Upload from Flat files
    regards,
    Rathy

  • How to use .mov files for video in Flash...

    Hello-
    I am trying to use .mov files for my Flash videos. I know it uses .mp4/flv/f4v, but I really need to use .movs. I know this works... but how?
    Suggestions?

    unfortunately running it through Adobe Encoder makes it a much, much larger file and the quality goes out the window. i really need to use .mov.
    any suggestions?

  • Location of the 'save file' for games on memory ca...

    Hey, im playing the game 'air hockey' on my nokia 5800, but its stuffing up a bit so i want to re-install it just in case it got damaged a bit from a previous update... But iv got so far into the game that i dont want to lose my progress, so does anyone know the directory of the 'save file' for this game, so i can just replace the new one with it when i reinstall the app?? The game was installed on my memory card.
    Thanks
    If iv helped in anyway, hit the kudos button

    can you give me any tips on where to look at least, like common places?
    If iv helped in anyway, hit the kudos button

  • Option to always use sidecar files for XMP

    Lightroom gives you the option to write metadata to XMP files, which is convenient if you want to share data with other programs (ACR, various DAM programs). In the beta versions, this data would always be stored in .XMP sidecar files, presumably for safety reasons. However, V1 writes the XMP data into the image file itself for those formats that support it (DNG, JPG, TIFF).
    I would really like to have the option to *force* Lightroom to use sidecar files for XMP data, like the betas did. The current V1 behavior (embedding data) is quite inefficient for fairly common backup scenarios.
    For example, I tend to back up all my raw files onto DVD after importing and culling. In addition I make a daily backup of all metadata that gets sent over the internet to a web server - a relatively small upload. What happens if I use DNG for my raw files and update something as small as a keyword? Indeed, *all* of the corresponding DNG files are modified, and because my backup software cannot know that only the XMP data has changed, all files must be burned to DVD again. If the metadata were stored in sidecar files, a simple, efficient metadata backup would take care of things.
    To implement this, a simple switch in the preferences would suffice, and the necessary code is already there. The only possible problem is the occurrence of two files with identical names, excluding the extension. For this case, I can see four different 'solutions':
    1) Force XMP metadata to be synchronized between files with equal names
    2) Make an .XMP sidecar file for only one of the files (always the raw file, for example)
    3) Update the XMP specification to specify what should be done in this situation (maybe include the file extension in the XMP data)
    Reards,
    Simon

    Actually, I don't (notice the 'if' :)). And this is only one of the reasons. I just picked DNG as an example, to keep things simple and because it seems Adobe wants DNG to work well for photographers.
    However, the same applies to JPG and TIFF images. I often end up changing details in the metadata after the image has been finished. For example, to correct the spelling in a keyword that has been applied to half the images in my database... Talking about a nightmare scenario!
    Simon

  • Using NFS file for ASM

    hello to all
    I am familar with ASM and NFS but I don't know what is mean of using NFS file for ASM
    can you explain for me ? or do you know manual for this on WEB ?
    thanks

    I don't think ASM via NFS is optimal.
    You need to create your NFS mounts. Then use dd to create files in your various NFS mounts and then present these files to ASM as disks.
    try:
    http://www.oracle.com/technology/products/database/asm/pdf/netapp_asm3329.pdf
    jason.
    http://jarneil.wordpress.com

  • Do I need to use Flex Files for a 24 fps edit?

    Hello.
    I am shooting on 16mm film, transferring to video (with key code burn in), editing on Final Cut 4, then matching back to film.
    I would like to save money by not having to create Flex Files, and was told that if I do a reverse telecine in Cinema Tools (converting 29.97 transfer to 24), and then edit at 24 in FCP, I will be able to generate (manually) my own cut list when I am done by noting the key code burned at the head and tail frame of my shots. The Cinema Tools manual even implies it would be able to generate a cut list itself?
    Can anyone speak to this or tell me why this plan wouldn't work--why I absolutely need a flex file? This will be a short film (under 10 minutes) and I will be capturing all the footage for the edit, so I don't need the flex file for help with capture, and I don't mind the time needed to log key codes myself for the cut list.
    Thanks so much in advance for any help!

    Hi. It costs enough to make a difference for my very, very small budget--a flat fee each time I transfer and I am shooting 100 foot rolls so there could be up to five or more transfers. Since I am capturing everything (entire camera rolls), I'm trying to understand if I need the flex files--if the key code is burned in, can't I use that for cut list? In other words, if I don't need the files for importing, what other reasons would you strongly advise me to have them made?

  • Using PDF files for items rather than .png.

    Hi there
    We have been looking into improving iBook production. We have a few books that feature elements that are comprise of a background image with text over the top. As the text isn't in an iPad-friendly font (I.e. not in iOS) and it doesn't have to be searchable. Previously, the items have been produced individually either in Illustrator or Photoshop. The main 'problem' with this is the plethora of file it creates, and the huge amount to time taken to apply style changes across all the separate items, save, re-import into iBA, and re-apply all the iBA-specific attributes.
    In an effort to speed up production somewhat, we have been trying to create these items in InDesign, using style sheets etc to give standardised appearance across all the items, and then drag and drop into iBA. The advantage is that all the separate items are in one document, and all style changes can be instantly applied to all items instantaneously, saving time, space, and effort.
    It places them as PDFs, and after unzipping the .iba file, the PDFs look fine, with pin-sharp text (as you'd expect, as PDF text would be vector data. Similarly, when you zoom in to the items in iBA, the text is still pin-sharp.
    However, once the iBA is previewed on a iPad, the text goes a little blurry. As one of the fonts is a dot-matrix-type font, the effect is noticeable - all the dots blur together into a line.
    Does anyone have any idea as to what is happening to the PDF between iBA and the iPad? Does it rasterise it at some point?

    Hi Ken
    'What leads me think it would?', well the fact that it worked, and looks ok. The iBook previews fine and works fine on the iPad.
    We initially came up with the idea when we 'unzipped' an .iba file (you know, changing the .iba extension to .zip, then unarchiving the contents), and found that iBA itself had created .pdf files for the full-screen photos which appeared rotated and shadowed on the iPad page, but were viewed as straight, unshadowed, images. (the rotated version was the iBA-created PDF file, the full-screen was the original .jpg we pulled into iBA). Naturally, we were surprised. So we started mucking about, and found that drag/drop from ID worked, and looked OK.
    As an update to my original post, it appears that the difference in quality was due to the fonts used. Once we opened the .PDFs within the .iba file, we converted the text to outlines, resaved the .pdfs, changed the unzipped folder back to an .iba file, and the font now looks great.
    BTW, Is it me, or were you being snippy?

  • How to use expansion files for AIR app (flash cs6) on Google Play Store

    I am currently working on an app that will undoubtedly end up bigger than the maximum size of 50 MB for the APK, and I have no clue how to add files to an expansion pack, how to load expansion pack, what files need to be in expansion pack, or even what an expansion pack does/how it works. If anyone can point me in the right direction, that would be great, I want to make an expansion pack now before I get even more files.

    Haven't had a need to do this for file size purposes but since we can now download and use SWFs with ABC, I just specify my external SWFs when I compile and once my app is run it downloads the SWFs (with a pretty preloader) before the user can do anything. I have my own servers so I believe that's all that Amazon Bucket is actually used for. That user didn't have their own web servers to serve up the SWF content from.
    Aside that, check the answer here. Google will turn any extra files uploaded for your app into OBB for you. You just upload the SWF:
    Create expansion file for AS3 android Air App Flash cs6 - Stack Overflow
    It also outlines if you need to upload multiple files then .zip them up and use an AS3 .zip library to extract the files.

  • Using XML Files for Message Bundles

    Hi There,
    does anybody knows if there is an easy way to use xml files instead of property files for the strings stored in MessageBundles (Locale)?
    Cheers Lars

    Oki,
    found XMLResourceBundle. No more action on your side is required, Thanx anyway...
    Bye

  • Using 'dmg' files for windows

    Hi,
    I downloaded a add-on for iTunes, but it was in the form of a .dmg file. Could somebody please tell me how to use this file/unpack/ convert it to a useful form!
    Thanks for any help.

    I just have a slight problem with controlling iTunes without switching apps/windows back to iTunes. I have a Logitech keyboard with media keys, but after installing 7.2 (and 7.3) the meda keys don't work with iTunes anymore. I thought the Sizzling keys download would solve the problem by assigning the functions to the media keys, but I can't even use the file!
    Could you suggest an alternative solution for controlling iTunes?

  • How to use swf file for Spark Skin

    Hi all
    I have little confuse about how to use swf file with Spark Skin,
    in Flex3 , i use Flex Skin Design Extension for Flash to deal with skin ,
    so basically , I just create a swf file and import to the project , then everything is ok
    but , seem that not working in flex4 , spark skin.
    1` I can't find the Flex Skin Design for the FlashCs4
    2` I try to use FlashCs3 version to import the skin art to the project , but seemed not working.
    3` I Google and check the Flex4 Help , seemed Spak skin need the Skin-Class , which I don't know how to use that with swf file
        what I have searched is how to use FXG , or some jpg file in that skin class, none of them are use swf file.
    so , is there any way that let user use the swf file to deal with the skin?
           is the Flex Skin Design can use in Flex4?
    Thanks

    Hello,
    I'm new to Flex, but have come to it from Flash Pro.  I'd like to know the same thing.  I think I found the answer here:
    http://www.flashallys.com/blog/spark-button-skinning-with-flash-symbols/
    However my question is now: Is this a good approach to use?
    99% of the googling I've done tells me to skin components with fxg files.  I've tried that by creating graphics and exporting from flash, but using swfs containing lots of graphics is much faster so I'd rather use that.
    The other thing I've done is to create custom components using these helpful tutorials:
    Creating component in flash:
    http://www.webkitchen.be/2008/12/12/video-tutorial-make-flex-components-with-flash-cs4/
    Dealing with Resizing with method overrides for your flash component:
    http://www.psyked.co.uk/flex/creating-flex-components-the-easy-way-for-flash-ide-converts. htm
    This allows me the flexibility of Flash Pro design with the layout, transistions, data binding etc from Flex.
    So my question is: Is this approach (skinning spark components with swfs, and using custom swc components made in flash) a bad idea for any reason?  E.g. does it create slow mobile apps?
    Cheers
    Chris

  • What setting should I use to save file for upload to youtube

    Hi,
    the link below is the video on youtube that I just saved using the first setting that I always use using Flash.  Now because of the change over, as we have discussed I have to save the file then upload it for sites I upload to after the change.  I know I can save it on the For Windows one but it is not HD.  As you will see when you play this video it is all shakey (and not because I am shaking the camera   ).
    The other link is the non shakey saved for windows version.
    http://www.youtube.com/watch?v=lfjoqXIm2q0 Flash
    http://www.youtube.com/watch?v=i2OwQ3GTSPE (saved For Windows)
    Should I just resign my self to using the work around and use the save for Windows and not the FLASH.  or is there a setting I can use that gets rid of the shake.   However, since most of what I post is for people trying to sell their horses I would like the best quality I can get up on YouTube.
    Thanks for your help.  I really do appreciate it very much.  Saves me hours of time.
    Sarah

    Because YouTube is so unpredictable -- and always changing it encoding systems -- your best bet is to use the workaround and output as a WMV file.

  • How can I set a default save file for scans using the Solution Center?

    Using Windows 7 - 64 bit.   HP Photosmart Premuim C-309a All-In-One Printer.
    Because of a Windows crash, I had to install a new drive and reload Windows. I also reloaded other software like the HP Solution Center & Drivers. My problem is that I can't find how to set a default folder for my scans.  This is NOT mentioned in the user manual but it was originally accomplished by HP Tech Support when the printer was new.  Can anyone relate how to set default folders for my scans?
    Thanks.
    Tango
    This question was solved.
    View Solution.

    Here is a document on how to scan through Windows 7. 
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03476857
    Click either solution center or the icon of the printer on your desktop. Here select "Scanner Actions" (or the analogous selection). When the window pops up from the HP software it should provide you with options for file type (.tiff, .pdf, .jpg) as well as resolution and media size. Here on this page there is also an option for you to go to the advanced options. Using this you can alter the default safe folder. 
    Let me know if that helps you out! 

  • Save file for Reader Extended PDF

    I created a form in Acrobat 9 Pro for a Customer who is using Reader 7 and they are unable to save text that they type in the form...which is the whole point of the forms they needs.
    I've done some research and it all says that I need to save my form as a Reader Extended PDF, but that isn't an option when saving my files (and my form is closed for editing).
    The only options I have under save as are as follows: Adobe PDF Files; Adobe PDF Files, Optimized; Encapsulated PostScript; HTML 3.2; HTML 4.01 with CSS 1.0; jpeg; jpeg2000; Microsoft Word Document; PDF/A; PDF/E; PDF/X; PNG; PostScript; Rich Text Format; Tables in Excel Spreadsheet; Text (Accessible); Text (Plain); tiff; XML 1.0
    I'm sure there is something that I'm missing, and if someone could help point me in the right direction I would be very greatful, as would my customer.
    Thank you in advance,
    Tiffany

    That worked, but now I'm having a different issue.  If you know why that would be amazing. As stated before my customer is using Acrobat Reader 7.  When they open the file they are getting an error message, but after cliking ok are able to open it and type in the document. When they save the file and open it back up the text is still there, but the form aspect of the file is gone, and it's just a normal PDF.  They need to be able to use the form multiple times in case information changes they need to be able to edit it.  Does she just need to upgrade to another version of reader?
    Any insight would be appreciated.

Maybe you are looking for