Use share located at server without SCCM roles

Hi,
The scenario is the following: sccm 2012 R2.
2 servers: first one is the server where sccm was installed and is DP too. Second server only is DP.
I need to deploy aditional software which source files are located at third server (without sccm roles).
Problem: When creating additional packages, I use a share located at the third server, and distribute the content to the second server (only DP role), but the package never distribute to the DP (in the sccm console I get an
error).
The question is:
It is possible to use source files located at a server without sccm roles?
Thanks in advance!

Source file access by the site server has nothing to do with the network access account.
Yes, the computer account for the site server must have access to the UNC where the source files are located -- both NTFS and share permissions (as Jörgen mentioned) There's no need to make it a local admin.
Note that the location of the source files has nothing to do with where the clients get those files from; clients always get source files from DPs.
Jason | http://blog.configmgrftw.com

Similar Messages

  • Can i use office web app server without adding to a domain ?

    spserver.local is my domain controller webapp.spsserver.local is my office web app server(OWA)(IP:79.123.161.xxx )
    I manage to use office web app with sharepoint 2013 my OWA is in a domain (spserver.local) and it's address is http://webapp.spserver.local/hosting/discovery There
    is no problem. But I want to seperate OWA with Sharepoint and its domain I want to remove the domain.Is it possible?
    For example my OWA's ip is 79.123.161.xxx
    I want to work like this: http://79.123.161.xxx/hosting/discovery
    When I enter the path http://79.123.161.xxx/hosting/discovery there
    is an iis message "File or directory not found."

    Are you asking if you can have your OWA in different domain compared to SharePoint server domain or are you asking that your OWA does not belong to any domain and you still want to use it with SharePoint?
    If your question is regarding using OWA in different domain then I think (someone can correct me if I am wrong) OWA can run into different domain. You just need to add your SharePoint Server host domain to the Allow List for an Office Web Apps Server farm.
    http://technet.microsoft.com/en-us/library/jj219459.aspx
    If your question is related to OWA not belonging to any domain then I do not think that will work and its not supported scenario. If you read the following article it states
    "All servers in the Office Web Apps Server farm must be part of a domain. They can be in the same domain (recommended) or in domains that are in the same forest. However, Office Web Apps Server won’t work if you try to install it on a domain controller."
    http://technet.microsoft.com/en-us/library/jj219435.aspx
    Amit

  • Is it available to add document editing feature in our own OA system using Office Web Apps Server without installing SharePoint?

    It seems we need to license OWA server with SharePoint to enable editing feature. Can I call OWA to
    edit file outside SharePoint? 

    You can edit documents via Outlook Web App (Exchange). You can also build your own interface to do so.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Deleting print drivers on Windows Server 2008 R2 without Print Role

    Hi,
    I'm using Windows Server 2008 R2 with Citrix Xenapp for published desktops meaning that i need to add a number of different printers to the server for the various users. Unfortunately i have some printer drivers that i think are conflicting and want to remove
    these from the server.
    How can i do this without adding the Print and Document Services role? Without this role i don't believe i can access 'Print Management' in the same way that i would with a Windows 7 client and then remove the driver package.
    Is there another way that i can do this or should i be adding this role just to remove these drivers and then perhaps removing the role (if necessary), assuming that this is possible?
    Thanks for any help.

    add the tools for print management
    in elevated cmd window
    dism /online /enable-feature /featurename:Printing-AdminTools-Collection
    If you already have local shared prints on the server, add the role.  Adding the Role installs the tools and opens the File and print sharing firewall port which would have been achieved by adding a shared printer. You do not need to add the Print
    role to setup a machine as a print server, it's not a requirement. 
    Alan Morris Windows Printing Team

  • Have a MacMini that is dropping NFS Share connections, Using cifs://servername/path however the NFS Share is dropped everyday without fail.

    Have a MacMini that is dropping NFS Share connections, Using cifs://servername/path however the NFS Share is dropped everyday without fail.  Is there a better way to setup this share?  I've got 5 other Macs that use the same NFS Share and none of them are dropping the shared connection.  This is on OSX 10.9.x Maverick.

    cifs:// is not NFS cifs:// is effectively SMB i.e. Windows filesharing, NFS is Unix filesharing, furthermore cifs:// is a way of forcing Mavericks to use SMB version 1 protocol. Normally you would use smb:// which will default to trying to use SMB version 2 protocol.
    Saying all that, SMB version 1, SMB version 2, and NFS should all normally work fine. It is possible that the server may be configured to disconnect idle users although one would expect this to happen with other users as well. It is perhaps more likely that your problem Mavericks Mac maybe going to sleep periodically, while asleep the connection to the server maybe being lost. Apple's own server software has specific cleverness to allow clients to sleep and resume their connection when they wake.
    Therefore it might be worth checking your Energy Saver settings on this Mac and disabling computer sleep.

  • Installation issue - using a remote server without using remote desktop or citrix

    Hello Experts..
    We have a client who wants to install SAP Client (SAP 9 PL 11) in their local machines, but connecting to a remote server. They want to avoid connecting through Remote Desktop or Citrix.They already installed SAP clients in local pc's and when they select the server, they already configured it to a server located overseas. We succed on achieve the connection, but the performance is really poor (sometimes it takes about 2 minutes to open a simple menu in SAP).
    We ran internet speed tests in the client's office and in the server, and both results were more than satisfactory. But we couldn't come up with a reason for this enviroment works properly..
    The question is... Is this kind of enviroment supported by SAP?? Do you know about any alternative to connect from the local PC to a remote server without using remote desktop or citrix??
    Thanks in advance...
    Raúl Fragueiro

    Hi,
    I assumed you are using VPN connection right?
    In your scenario that is normal since the GUI of SAP B1 is not built for type of connection compare
    to SAP ERP GUI.
    The only SAP supported type of remote connection is either Terminal Server or Citrix.
    In our own scenario we are using Terminal Server and we are very satisfied. We have used
    this between to different cities. This is also prevents data corruption cause by intermittent
    internet connection.
    Hoping you will be convinced of using Terminal Server or Citrix.
    By the way, a quick question, why are you hesitant to use RDC or Citrix?
    For overview, if your remote requirement is just simple and basic you may use Terminal Server.
    The implementation of  this is very fast and simple also, what you need is only a license.
    If complex and advance features connection requirement connection use Citrix.
    For better understanding you may search from the site for the difference of the two.
    Thanks.
    Regards,
    Clint

  • I share a an apple id with my kids. We all use the same credit card for purchases.  Is it possible for only me to use the icloud online storage without making this available or visible to the kids?

    My kids and I all use the same credit card and password for app and music purchases.   I'm assuming we all use the same apple ID too. (not sure) We can share apps and music although we all have our own itunes libraries. Is it possible for only me to use the icloud online storage without making this available or visible to the kids or do we all have our own storage?

    I just checked and they have already sucked up all my online storage.  Ahhh techy teens!  I think I will just leave it at that and back my own stuff up on my computer. Less confusing
    Thanks for all the help!  I am definitely more educated now and I'm off to check that cc bill too.

  • How to add byte[] array based Image to the SQL Server without using parameter

    how to add byte[] array based Image to the SQL Server without using parameter.I have a column in table with the type image in sql and i want to add image array to the sql image column like below:
    I want to add image (RESIM) to the procedur like shown above but sql accepts byte[] RESIMI like System.Drowing. I whant that  sql accepts byte [] array like sql  image type
    not using cmd.ParametersAdd() method
    here is Isle() method content

    SQL Server binary constants use a hexadecimal format:
    https://msdn.microsoft.com/en-us/library/ms179899.aspx
    You'll have to build that string from a byte array yourself:
    byte[] bytes = ...
    StringBuilder builder = new StringBuilder("0x", 2 + bytes.Length * 2);
    foreach (var b in bytes)
    builder.Append(b.ToString("X2"));
    string binhex = builder.ToString();
    That said, what you're trying to do - not using parameters - is the wrong thing to do. Not only it is insecure due to the risk of SQL injection but in the case of binary data is also inefficient since these hex strings are larger than the original byte[]
    data.

  • SQL query to get the without SCCM agent for a Server

    Hello every one,
    Can I get the SQL query for a server without a SCCM agent . 

    Here you go!!
    Add the version for windows 2012 server if you have them as well in your environment
       v_R_System.Netbios_Name0
      ,v_R_System.Full_Domain_Name0
      ,v_R_System.User_Name0
      ,case
    When v_R_System.Operating_System_Name_and0 LIKE N'%Server 6.1'THEN 'Windows Server 2008 R2'
    When v_R_System.Operating_System_Name_and0 LIKE N'%Server 6.0'THEN 'Windows Server 2008'
    When v_R_System.Operating_System_Name_and0 LIKE N'%Server 5.2'THEN 'Windows Server 2003 R2'
     ELSE 'Unknown Version' END AS 'OS version'
    FROM
      v_R_System
    WHERE
      v_R_System.Operating_System_Name_and0 LIKE N'%server%' and v_R_System.Client0 is null
    Kindly mark as answer/Vote as helpful if a reply from anybody helped you in this forum. Delphin

  • Is it possible to connect labview with opc server without using NI dsc Module ?

    Hellow sir,
    I want to get data over labview using OPC server and i am not using any dsc module vi (Alams, print, GUI, security).I am using share variable to get data from OPC server to labview. Now i want to deploy that application to third party computer. (where there is no NI software is installed)
    i am using labview 8.6 and 2009.
    Many ? like....
    1) what is the procedure to install that application in third party computer.
    2) Do i need to use my dsc run time licence..?
    waiting for your valuable feed back.
    Thank you.
    CLAD
    Labiew programmer

    Hi, When you connect to NI OPC Server by creating New I/O Server > OPC Client. You will see all registered OPC Servers running on local machine or remote machine. I used KepServerEx from Kepware and LSIS OPC Server from LG with no problems. Just make sure that the OPC server is running.
    Hope it helps
    Waleed El-Badry MSc.,MCPD, ISTQB Certified Tester
    Assistant Lecturer
    Mechatronics Department
    Faculty of Engineering
    Misr University for Science & Technology
    Attachments:
    LG.png ‏57 KB

  • Printng page using a href on server location

    Hello GURUS,
    I am printing a document on client machine . document is located on server. in my jsp page I have coded javascript
    prt.setAttribute("href", altdoc);
             printWindow();is used for printing.
    This code workes properly when i run it on my local-netbeans tomcat-server.
    but when this file is deployed on main server it shows no error and also no execution.
    If i put alert then alert is shown but , printing is not done.
    please help me to solve this problem..

    When I do it I get a Print Dialog asking me to specify the printer number of pages etc.
    Does this window pop-up on the clients machine when deployed on the server?

  • Can I create a dynamic report in the server without using a report template

    Hi,
    My company just bought a Crystal Report Server XI and it didn't have a report designer.
    I can't start creating report without the designer.
    The question is can  I generate a dynamic report at runtime (on the crystal report server ) without using report template?
    My project requirement is to use a crystal report server to manage the reports.
    Some client web application will just access this report server.
    I  hope the experts can provide me some guidance.
    regards,
    Rulix
    Edited by: Rulix Batistil on Nov 3, 2008 8:08 AM

    Hi Rulix,
    The latest version of CR Server is 2008. Therefore I'm assuming you are using CR Server 2008.
    New in CR 2008 is the .NET report modification software development kit (SDK). The report application server (RAS) SDK is now available for users of Crystal Reports .NET API without the use of a RAS server. Report modification such as changing, adding, or removing database providers, or adding, removing, or creating report objects, parameters, formulas, and sections can be achieved by accessing the RAS SDK through the Crystal Reports .NET SDK.
    Java developers however receive the JRC and Java SDK documentation through the free Crystal Reports for Eclipse download. This product will be updated on a separate schedule from Crystal Reports.
    Further Information and samples are available in our [Developer Library|https://www.sdn.sap.com/irj/sdn/businessobjects?rid=/webcontent/uuid/5001d5de-f867-2b10-00bf-8d27683c85a0]
    Kind regards,
    Tim

  • Windows 2008 R2 Server without Service Pack 1 was flag "Not Required" during the SCCM patching/deploying SP1 for 2008

    Dear Brothers,
    I come to a scenario were one of our Windows 2008 R2 Server without Service Pack 1, was Flag under SCCM 2007 Reports Update Status for Service Pack 1 deployment to be "Not
    Required" which definitely inaccurate.
    What I want to know what are the conditions for the Software Update to send a status to SCCM Server that the Service Pack is “Not
    Required” instead of the other way around?
    Is there anyone that can guide me to any KB Article regarding this behavior?
    Regards,

    Yes, I know this is an old post, I’m trying to clean them up. Did you figure this out, if so how?
    I have seen this before and what I have done is manually applied the SP1 to the server. Only then did the error show up as why SP1 didn’t apply. After fixing the error, CM was apply to apply SP1 and other SU to the server.
    http://www.enhansoft.com/

  • How to open a file located at server using JSP

    hi,
    i would like to open a file located at server as it is. I mean to say, if it a MS Word file, i wanna open it in MS Word, if it an Excel file, i wanna open it in Excel. i know the location (path) of the file. Can someone help me please.
    Thanx

    The best way would simply be to HREF it.
    ie<a href="excelfiles/spreadsheet.xls">Open spreadsheet</a>When a user then clicks on that lick in their browser they should be given the option to either download or (if they have the appropriate program, in this case MS Excel, installed) open it.
    This works best if the client is using a version of Internet Explorer (if you're dealing with MS files), but any browser should potentially offer you the option of opening the file.
    Beyond that there's no way to specifically open a program on a client machine (it'd be a bit of a security loophole if you could! - Imagine a JSP page being able to open FDISK...). All you can do is pass the file (via the HREF) and let the client decide what to do with it.

  • Use HTML5 and FMS server 3.5 to share/play videos

    Hi!
    We use FMIS (3.5) to distribute our videos, but how can I use HTML5 to view them without duplicating the video to the HTTP VOD directory.
    Can I point to the application FMS file location like I can with RTMP in some way?
    Thanks

    To be frank did not get your question clearly though i'll try answering it. I am assuming you are trying to do Progressive Download using HTML5 video tag as 3.5 did not support HTTP Streaming specially HLS. So i think in that case - you can either configure Apache location directive to point to your content directory or place them under "/webroot/vod" and configure VirtualDirectories for RTMP Streaming

Maybe you are looking for