Use the command "Properties" in Windows Explorer to unlock the file
I'm getting this error where, when I start Photoshop, I get a popup saying "Cannot load Photoshop because the file is locked or you don't have the needed privileges.. Use the command "Properties" in Windows Explorer to unlock the file". I unlocked it's access to everyone for the 64-bit and the 32-bit version, still doesn't work. The only way to make it work is by going in Program Files>Adobe>Adobe Photoshop CS5 (64-bit) and manually starting it as an administrator.
Everything was working just fine until today. Please help!
If this worked before, and you have made no hardware or software changes you might want to reset the preferences.
Start photoshop and IMMEDIATELY hold down the Alt + Ctrl + shift keys. It is a little tricky but keep trying until you get a reset window.
Similar Messages
-
Have three users with CS6 Design Standard having problem saving files to a network share. All three are running Windows 7 SP1. CS 6 has all current updates applied. Have searched google for solution but all suggestions so far have not solved problem.
Have confirmed that windows explorer preview pane is not enabled/turned off. Other users on the network have no problems saving file to shared folder. Users can save to desktop and then copy and paste or drag and drop to the share!Further Google searching found this bit of information....and it fixed our problem!
Rather than deleting the files I renamed them as follows Adobe Photoshop CS6 Prefs_old & Adobe Photoshop X64 CS6 Prefs_old
To fix and prevent this error from happening, the user will navigate to:
C:\Users\[USERNAME]\AppData\Roaming\Adobe\Adobe Photoshop CS6\Adobe Photoshop CS6 Settings
Depending on what version of photoshop is causing the error to appear you will delete the following file:
Adobe Photoshop CS6 Prefs.psp (for 32bit version)
Adobe Photoshop X64 CS6 Prefs.psp (for 64bit version) -
Opening my Photoshop Elements 11 does not work. I always get following message: "Could not open a volume of work, because the file is locked or you do not have the required permissions. Undo the protection of the file on using the command 'Properties' in Windows Explorer." What is wrong? I cannot unterstand what I have to do!
Could not open a scratch file because the file is locked or you do not have the necessary access privileges. (…) | Mylen…
Mylenium -
Captivate gallery in Windows Explorer. Locate the Sound Effects folder
How do you do this Open the Captivate gallery in Windows Explorer. Locate the Sound Effects folder? I dont know if this is the cached folder or what????
C:/Program Files/Adobe/Adobe Captivate[your version]/Gallery/Sound Effects
-
Help with Adobe.premiere.elements12. Please
It would appear under the organizer tab that the photos are organised in the lowest folder in the folder structure within Windows Explorer. How can I use the Windows Explorer structure to organise the photos within Elements.In a situation such as yours, I tend to consolidate items into folders so I have folders of nice workable numbers of images, somewhere between 20 and 200 images. Now, whatever, once you've imported, do your moving within LR, not the OS! I will select all in a folder and drag into a folder a level or two or three above, and then delete the newly empty subfolders. I hope this helps a bit!
Once you've reached just new Imports of camera output, you'll be flying along. -
I have reorganised my music in the itunes folder in windows explorer. Now I can't sync all my music to a new iPad, or play the music from itunes (as it is looking in the old location). How do I repoint itunes to all my music?
Have you read for possible solutions over in the "More Like This" thread over here?----------------------->
Check out the following KB Articles: http://support.apple.com/kb/HT1329 How to use your iPod to move your music to a new computer
http://support.apple.com/kb/HT4527 iTunes: How to move your music to a new computer -
New Camera RAW in Photoshop CC 2014 won't open multiple Panasonic RAW (.rw2) at the same time from Windows Explorer. If I select 2 raw files and click "Open" Camera RAW will only open 1 raw, then when I click "Done" it will close and open the second, sequentially. Previous Photoshop CC and RAW worked fine, it would open mulitple RAW at the same time. How do I fix this?
If it worked for you that way previously there isn't much to comment about. I just tried opening multiple images from Windows Explorer with Photoshop CS6 and Camera Raw 8.6, and the first image would open and when I clicked cancel then the second image would open. But if I wanted multiple images opened in Camera Raw to work on them simultaneously it was necessary for me to open them from Bridge. I just did it as an experiment because I normally use Lightroom. Anyway, IF it was a feature at one time to work as you described, it doesn't seem to be that way now.
-
Close_Form('XXE_F501_SCRIPTING_START'); this is a command in IESCLPKG.PLL WHEN I AM USING THIS COMMAND MY SCRIPTING WINDOW IS GETTING CLOSED BUT THEN ONE ERROR IS COMMING ,KINDLY GIVE ME IDEA TO DEBUG THAT ERROR
if (param_value = 'CLOSE_SCRIPTING_WINDOW') then
--go_block('VIEW_IB');
-- SET_WINDOW_PROPERTY('SCRIPTING_WINDOW', WINDOW_STATE, MINIMIZE);
--Set_Window_Property('SCRIPTING_WINDOW', VISIBLE, PROPERTY_OFF);
--hide_window('SCRIPTING_WINDOW');
-- GO_BLOCK('CTRL');
fnd_message.set_string('1');--nimish
fnd_message.show;--nimish
--Close_Form('XXE_F501_SCRIPTING_START'); -- Commented for Nova
fnd_message.set_string('2');--nimish
fnd_message.show;--nimish
Scripting_Util.EndScript;
end if;
THIS IS THE PLL CODE KINDLY GIVE ME A CLEAR SOLUTION.First: you should get a new keyboard. Seems your shift-key is stuck.
Second: A header of a post is a header and not for a summary of your question
Third: This is the forum for the tool SQL Developer. Please mark this question as answered and post again in Forms
Forth: When you expect an answer, the least would be to include the errormessage and your forms version.
Regards
Marcus -
Accessing the Recycle Bin via Windows Explorer
I run a no-icon desktop and have noticed in the RC that I can not seem to access the Recycle Bin via Windows Explorer as has previously been the case. Thus making it, in my experience so far, impossible to empty the Recycle Bin without turning on Desktop Icons to do it, and then turning them off again when finished.
I have found a work-around that is quite simple to setup, add a Favourates Shortcut to Windows Explorer, but I wondering with there is a setting somewhere now that needs activating/deactivating to have Windows Explorer show the Recycle Bin as one the the items in the Navigation Panel under Computer?When the Recycle Bin is visible on the Desktop, left-click and drag the icon image to the TaskBar near the Start button. If you have Aero, you'll see a message "Pin to Windows Explorer".
Then open Windows Explorer and you'll see the Recycle Bin on the DeskTop from the left column.
Now you can opt to not display the Desktop Icon. Contol Panel>Appearance and Personalization> Personalization and select >Change Desktop Icons>Uncheck Recycle Bin.
Work for you?
After doing the above, I then opened Windows Explorer, and used the organize tab. I then selected "the show all folders" option, selected ok. The Recycle Bin now appears in the left Navigation Pane and the Icon is not visble on the desktop. I believe it is because I pinned it to win explorer by dragging it to the taskbar that it appears there. -
Question: I am using a mac , wired Keyboard, on a windows 8.1 platform ( this is because I have boot camped my hard drive) Unfortunately when I change over from my mac set up into the windows 8.1 the key board does not behave like it does when I am using as a mac. The numbers , on the right of the keyboard , no longer function and I have to use the numbers at the top of the keyboard, very annoying. Can anybody let me know how I unlock the numbers on the right of my keyboard?
Regards CMI have stated every issue I’ve had so far in a fairly clear and concise way. I think if you read what I wrote, it all makes logical sense as to what is going on. Windows 7/8 would work just as well on a Mac if it was supported the same way the OS is for other OEMs.
As I stated earlier in the post, I’m having these same issues in windows 8, not just 8.1, which is the reason for the post. I know the difference between supported by drivers and not supported by the manufacturer. The fact that when Haswell mbp’s came out and no revision to bootcamp for the new hardware was released to fix issues with installing windows on the new hardware shows Apple clearly Is not supporting bootcamp as strongly as they advertise.
I am being realistic on Apple having drivers early. Anyone with an MSDN subscription can download the RELEASE version of windows months ahead of the actual release, I’m 100% sure if any average consumer can do that by paying $100 and saying they are a developer, apple can do it just as easily.
You aren’t much help, you haven’t answered really anything to my post, nor have you contributed any knowledge that wasn’t clearly posted above, so don’t say anything if you don’t have anything to contribute.
By the way, my rant is directed at apple, as you can see because I am saying “Apple, if you are going to…” because this is an Apple forum on Apple’s website. It is not directed to end users, clearly. -
I am having mac book air 2012model i had installed mavericks and use it, i long press command and power button at a same time and i saw the command prompt, from that i had formated the total hard disk. how to i want to install the OS again ?
i tryed with download mavericks but finally its saying a error message like cant conect to istore like that its saying and every thing is clear like internet and other stuf i tryed with 3times no progress same error pls help.. i bought this lap for my bro with his apple id only we use it now he got a new mac book pro so he gave to me so i formated and use it i use my apple id is that problem come because of changing apple id ? pls eplainFirstly, what is the source of the 10.6.4 disc? Is it the original installation disc for your MacBook, or one 'borrowed' from another computer?
It isn't the retail version, because that's 10.6.3.
Assuming it's the correct disc (i.e. the one that shipped with your Mac), you need to boot from it again.
OK the language page.
From the installer screen, ignore the continue button, go to the menu bar and choose Disk Utility from the Utilities menu.
In DU, select your internal drive in the sidebar (the top item with the makers name and serial no.).
Run Repair Disk. If that comes up as disk OK, click the partition tab. Select the partiton from the drop-down above the graphic; 1 partiton is all you need.
Go to the options button and ensure that the partition scheme is GUID and the file system to Mac OS Extended (Journalled). Name the partiton (usually Macintosh HD), click Apply.
When the Macintosh HD volume appears below the drive name, quit DU and see if you can then install.
If the screen after the language screen doesn't show the menu bar, it may be necessary to use another Mac to do the job with the MB in Firewire Target Disc Mode. If it won't boot in TDM, or the MB doesn't have FireWire then it's getting very difficult. -
After purchasing the Export PDF Online software when I attempt to perform a "File/Save As" when viewing a document on the web it locks up windows explorer. I receive "FIle Save As - Not Responding"
I think you may be correct. It is coincidental with my upgrade to Adobe Reader 11.0.10.
I have installed IE 11 (11.0.9600.17690)
It may be an Adobe Reader problem in that the "tools/file save as" dialog is completely empty. No local directories are displayed for saving to. When I try to Close(X) the "File Save As" box it pops up a message box on top that says "Adobe Reader is not Responding" It locks up all of my IE windows, not just the one with the PDF doc.
I need to go go Task Manager and stop the IE task. All my browser windows are then closed.
That is the only way to recover from the "Adobe Reader is Not Responding" message. -
Altering the information box in windows explorer`
I was wondering if it was at all possible to alter the information box in windows explorer. I am talking about that little box that pops up when you place your pointer over a folder and let it sit there for a second. Currently it displays the first few files and folders, but I want to alter that so it would display the first 10 or 15 files or folders. Can anyone help with this?
Java does not alter Windows' ToolTips.
Check Microsoft/Windows resources/forums for possible solutions. -
im wondering if anyone can help with this
I get this message when i open PhotoShop
(could not complete the command because Photoshop was unable to find the JavaScript)Photoshop installer should have installed a ScriptingSupport Plugin in each version of Photoshop you installed. Scan your system for ScriptingSupport I found six on my windows system. Here where I found them:
-
The information that can be found in the Document Properties of a PDF, such as the author's name, ke
The information that can be found in the Document Properties of a PDF, such as the author's name, keywords, and the PDF's page size, is known as which of the following?
Sounds like a question from a test... Only without the multiple-choice options.
Maybe you are looking for
-
Itunes no longer syncs with ical even though it recognizes all my calendars
My first problem was that iTunes would only transfer over certain calendars, not all that I had selected. On top of that, some, but not all, of the start times were an hour later than my iCal calendars. And, I've been having issues with disappearing
-
Yahoo! Mail will not load in Firefox, but it is OK in IE, is it me or them and what do I do?
This happened all of a sudden today and I didn't change anything.
-
Continually prompted to update 30 GB Color iPod to 1.2 software
Every time I start iTunes, I get a message that a new version 1.2 is available. I then choose to download it, run setup, and that installs iTunes 6. I restart, then launch iTunes, and the process repeats. I can synch,and have done so multiple times.
-
HT204053 i want to use my itune id but i set up a2nd id by mistake how do i fix it?
i want to use my itune id on my ipad but i set up a 2nd apple id by mistake how do i fix this?
-
Cannot use Search Function in Forum
Every time I try to use the search feature in the forums I get an error. Here is the text copied from the error... The web site you are accessing has experienced an unexpected error. Please contact the website administrator. The following information