Use the header's date in columns

Hello,
I would like to know if it is possible to tell Mail to show the header's received date in the columns, and not the date of the file on the IMAP server.
I run my own server, and I switched the hardware, and all mails I transferred (via the « Move to » feature in Thunderbird of course, I didn't transfer the mails to myself :D) from one server to another show up with the transfer date in the column view, but with the correct date when I read them...
Thank you in advance.

... so rebuilding the mailbox doesn't make sense ...
Reindexing is not the same as rebuilding. The index file apparently maintains certain message metadata derived independently from the message headers (from the server-client transaction 'envelope' perhaps?), & what is displayed in Message Viewer columns can sometimes differ from what is displayed in the message headers because of this.
Since Mail can maintain local copies of certain IMAP account messages in mailbox folders that do not begin with "IMAP-" (in .mbox folders rather than .imapmbox ones), it is possible reindexing can correct date discrepancies for some messages, even ones derived from IMAP servers.

Similar Messages

I need to pass data from an Access database to Teststand by using the built in Data step types(open data

base /open SQL Statement etc) the first time i defined the system everything was fine but when i changed the Database (using M.S.Access) the " open SQL Statement" it would show the tables but not thier columns ,I"m using win98 sec edition / Teststand 1.0.1i need to pass data from an Access database to Teststand by using the built in Data step types(open database /open SQL Statement etc) the first time i defined the system everything was fine but when i changed the Database (using M.S.Access) the " open SQL Statement" it would show the tables but not thier columns ,I"m using win98 sec edition / Teststand 1.0.1
When I tried the same thing on another cmputer the same thing
happend
appreiciate u"r help

base /open SQL Statement etc) the first time i defined the system everything was fine but when i changed the Database (using M.S.Access) the " open SQL Statement" it would show the tables but not thier columns ,I"m using win98 sec edition / Teststand 1.0.1Hello Kitty -
Certainly it is unusual that you can still see the tables available in your MS Access database but cannot see the columns? I am assuming you are configuring an Open Statement step and are trying to use the ring-control to select columns from your table?
Can you tell me more about the changes you made to your file when you 'changed' it with MS Access? What version of Access are you using? What happens if you try and manually type in an 'Open Statement Dialog's SQL string such as...
"SELECT UUT_RESULT.TEST_SOCKET_INDEX, UUT_RESULT.UUT_STATUS, UUT_RESULT.START_DATE_TIME FROM UUT_RESULT"
Is it able to find the columns even if it can't display them? I am worried that maybe you are using a version of MS Access that is too new for the version of TestSt
and you are running. Has anything else changed aside from the file you are editing?
Regards,
-Elaine R.
National Instruments
http://www.ni.com/ask

Using the cache in Data Integrator

Hi,
I'm trying to understand if is possible restrict the use of cache in Data Integrator to load initial datasource to limit the use of server resources.
I understand from the manual to set the option to use the type of dataflow cache: Pageable or In-Memory. This option does not solve my problem. I would like to avoid to load all the cached datasource.
Is possible to perform query objects directly without first loading all data sources in the tables?

base /open SQL Statement etc) the first time i defined the system everything was fine but when i changed the Database (using M.S.Access) the " open SQL Statement" it would show the tables but not thier columns ,I"m using win98 sec edition / Teststand 1.0.1Hello Kitty -
Certainly it is unusual that you can still see the tables available in your MS Access database but cannot see the columns? I am assuming you are configuring an Open Statement step and are trying to use the ring-control to select columns from your table?
Can you tell me more about the changes you made to your file when you 'changed' it with MS Access? What version of Access are you using? What happens if you try and manually type in an 'Open Statement Dialog's SQL string such as...
"SELECT UUT_RESULT.TEST_SOCKET_INDEX, UUT_RESULT.UUT_STATUS, UUT_RESULT.START_DATE_TIME FROM UUT_RESULT"
Is it able to find the columns even if it can't display them? I am worried that maybe you are using a version of MS Access that is too new for the version of TestSt
and you are running. Has anything else changed aside from the file you are editing?
Regards,
-Elaine R.
National Instruments
http://www.ni.com/ask

Using the Import Test Data Wizard

Using Oracle HTMLDB 1.6.0.00.87
Whenever we try to use the import test data wizard, even using a simple text file such as: "Forname","Surname"
Joe,Bloggs
the file does not import correctly. We are trying to import to a new table and uploading a txt file with the above content. What we get in the set table properties is something like: Column Names : rom_wwv_flow_file_objects
Data Type:VARCHAR2
Format:
Column Length: 30
Upload: Yes
Row 1: Where n
Any ideas? We tried the same test at the UK Oracle user group conference with success. Is there a set up problem on our server?
Cheers
Ty

Problem solved.
Ensure the correct character is set when importing.

How do I use the High Speed Data Logger with multiple I/O devices?

I am using the High Speed Data Logger vi to read from a 16 channel A/D card (NI PCI-MIO-16E). The project may require more than 16 channels. How can I use High Speed Data Logger to read from two A/D cards? Will it be able to write the data to one file?

The High Speed Data Logger vi will not acquire and right to multiple DAQ boards at the same time without modification. LabVIEW is more than capable of doing this what you are trying to do, but you will have to modify the code.
Regards,
Anuj D.

I don't want to use the head phones when making a call. How do I turn up the ear volume on the iphone 4se

I can't hear people when they call me. How do I raise the volume with out using the head phones?

You can only raise and lower the earpiece volume while you are on a call. So, make a call, then use the bottons on the side to adjust the volume. If you're not in a call, those buttons will adjust the ringer/media volume.

I want to cut out a head from a photo and insert it into another photo again. In the head hair flying in the wind and the blue sky can be seen between the hairs. This blue sky I want to remove, so I can only use the head with hair flying in another photo.

I want to cut out a head from a photo and insert it into another photo again. In the head hair flying in the wind and the blue sky can be seen between the hairs. This blue sky I want to remove, so I can only use the head with hair flying in another photo. Is it possible to simply delete this blue color of the sky?

Make your selection and then use Refine Edge.
See this video tutorial from Bob Gager.
https://www.youtube.com/watch?v=xrl3Qwg6zSc

When to use the Export To Data Moderler design option

Hi,
Is there an advantage or difference between sending someone a model created using the Export > "To Data Modeler Design" tool as opposed to just sending them a copy of the folder tree for the same model? If yes, could you please explain what the differences are?
Thank you,
Beatriz.

Hi Beatriz,
you can export just one relational model or objects belonging to one or several subviews.
Philip

Error 91 - Trying to Use the Variant to Data Function

I am running into a problem when trying to use variants in my application. I have a state machine set-up in that one state creates a task list (cluster of arrays) and then converts it to variant. The variant is fed into a shift register that allows me to access the task list from a different state.
The problem comes when I try to use the Variant to Data function. I right click on the task cluster to create a constant, and then wire that to the TYPE terminal of the Variant to Data Function. I wire the task cluster variant to the VARIANT terminal. When I run the VI, i get error 91: Possible reason(s): LabVIEW: The data type of the variant is not compatible with the data type wired to the type input.".
How can I get this error when the type I wired to the TYPE terminal of the Variant to Data terminal is a constant created from the exact type created a variant from???
Section of the state machine where I wire the cluster to variant:
Section of the state machine where I use the Variant to Data to get the cluster out:
The constant wired to the Variant to Data TYPE terminal was created from the cluster that is wired to the Data to Variant. I do not understand how there can be a type mismatch???
Solved!
Go to Solution.

Charles_CLA wrote:
crossrulz wrote:
Are there any other state that run between these two? I am noticing you have some "Use default if unwired" tunnels comming out of your case structure. First of all, disable that on the tunnels. Secondly, for those cases where you are not affecting that data, wire the data straight from the input tunnel to the output tunnel. I recommend using the linked tunnels to make it even easier on yourself.
With the default tunnels being output, your variant coming in could really be empty, therefore the conversion fails.
Are you stalking me today? Every single post I've clicked comment on, you beat me by a hair!
No, just 12 hour days (due to the holiday) get really long...and you are just slow.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Is there a way to filter a drop down list by using the result main data display from"GetUserProfileByName" when open the form.

Hi
Is there a way to filter a drop down list by using the result main data display from"GetUserProfileByName" when open the form?
The second source has a huge list of company names that can be narrrow by email work.
background:SP 2010 and Infopath 2010
CRISTINA&amp MICROSOFT Forum

I'm not sure if I understood your question clearly but here is a good resource on how to get attributes from "GetUserProfileByName" web services:
http://blog.mangroveweb.com/pre-populating-an-infopath-from-with-mysql-data-using-a-net-web-service/using-sharepoints-getuserprofilebyname-web-service-to-retrieve-ad-account-information/
Regarding filtering dropdown list then this could be done by applying form on-load rules.
Hope this helps

Recording using the head phone out

I am sure this question has benn asked before but I couldn't find it on the postings. Is there any way I can record from CD/Tape player using the head phone output? There are no other sources of output. Thanks, Herb Hall

herbhall274,
I've connected the headphone jack of a small handheld cassette player to the line-in of a SoundBlaster card (using a male-male stereo cable). Turn up the CD/Tape player volume slowly until you get a good sound level in your recording software that doesn't clip. That will keep your input voltage in a range that is safe for your soundcard (~v). As long as you're talking about a standard CD/Tape unit that runs on batteries or a low voltage DC adapter, or a deck unit with a low voltage headphone jack, it should work.Message Edited by Katman on 02-29-200805:36 PM

Use the last number in a column

Don't use spread sheets much and wondered if anybody could help with this problem. I am monitoring my weight and each day put the new weight value in the next cell. ie
201
198
197
I have another cell in the sheet which contains my target weight from which I want to subtract the latest weight record this of course moves to the next cell down each day. Is there a formula to pick the last number in a column of data? ie in the above example takes 198 on day 2 but 197 on day 3.
Thanks
Jonathan

Ok. The formula didn't have to be that fancy after all. We can use COUNT to count the number of entries, then use INDEX to return the corresponding entry.
If the actual weights are in column B and goal weight in E2, then in D2 enter this formula:
=E2-INDEX(B,COUNT(B),1)
So, a couple caveats:
1) Must start entering the weights in the top body cell (whether table has header or not, see below).
2) Column B cannot have any extraneous numbers (this will throw the count of entries off).
Free Image Hosting
If you are actually using Numbers '09 and the table has headers, then for some reason the formula is slightly different depending on how many header cells are in column B. E.g. if one header, then enter =INDEX(B,COUNT(B)+1,1); if two headers, then enter =INDEX(B,COUNT(B)+2,1); Or, simply enter =INDEX(B,COUNT(B)+ROW(B)-1,1), which adjusts to whatever number of header cells.
Robin
Message was edited by: sharknca

How to use the same function in a column so it varies from row to row.

In a spreadsheet, I have four columns: item, quantity, price, total cost.
How can I write a function (product) for the entire "total cost" column that automatically will place the correct "total cost" for the item in that row; i.e.: =product(quantity,price)
This would save time by writing one function for the entire column so that the function would not have to be written for each row.
Thanks for your help.

Question asked and responded several times.
If quantity is in column C and price in column D,
the common soluce is to use the formula:
=C2*D2 in E2
then use the fill down tool which will automatically create the formulas
=C3*D3
=C4*D4
As I am a lazy guy, I use a shorter formula:
=C*D
and fill down reproduce it as is in the other cells.
In fact I use
=ROUND(C*D,2)
Yvan KOENIG (from FRANCE samedi 4 juillet 2009 11:31:06)

How to use the API for DATE, MONTH AND YEAR

I would like to use the java api in .util.calender in the java api to get the date.
How to implement the API for the "DATE","MONTH","YEAR" which are available provide by java?
can someone give me in one complete code?

From the Java Developers Almanac 1.4:
    Calendar cal = new GregorianCalendar();
    // Get the components of the date
    int era = cal.get(Calendar.ERA);               // 0=BC, 1=AD
    int year = cal.get(Calendar.YEAR);             // 2002
    int month = cal.get(Calendar.MONTH);           // 0=Jan, 1=Feb, ...
    int day = cal.get(Calendar.DAY_OF_MONTH);      // 1...
    int dayOfWeek = cal.get(Calendar.DAY_OF_WEEK); // 1=Sunday, 2=Monday, ...

Using the Oracle ADF Data Visualization Components in a standard JSF enviro

Hi,
I have asked this question on the JDeveloper and ADF forum, haven't gotten a response yet:
Using the Data Visualization Components from ADF in a JBoss 7.1.1
.. but I would like to ask the question here as well if anyone have used the data visualization components from Oracle ADF Essentials .. the free version ... using the graph components in general, but I am looking at specifically using the gantt chart component in particular ... in a standard JSF environment ( e.g. Tomcat + Mojarra, or JBoss with the built-in Mojarra implementation ) ??
I know there are other JSF charting components out there ...like the ones from PrimeFaces, but the gantt chart from ADF looks more ... well .. professional.

People are not prone to answer questions that are not really a problem. You want to know something about a free product, install it and see for yourself. In any case spreading your question around is not going to help you, the people who know about ADF are still going to be looking in the ADF forum. If you don't get an answer there, what chance do you think you have that you'll get one here where it is off-topic?
I'll close with a word of advice: you generally pay for quality. If you want professional looking charts, you'll probably have to look at commercial products.

Use the header's date in columns

Similar Messages

Maybe you are looking for