Use the headphone jack output and bluetooth at the same time

I am going to buy a blue-tooth headset for my 3GS.
Am I able to use the blue tooth mic and the headphone plug on the 3GS in the phone conversation?
Message was edited by: Winson Ip

Now I listen the music with the Ipod through headphone amplifier for better sound quality. The amplifier is plug into the dock port. I have to buy a bluetooth headset come with the 3.5mm jack. I want the sound output still from the headphone jack or line-out. The bluetooth headset work like a cordless mic. Also, the headphone amplifier still getting work.
Message was edited by: Winson Ip

Similar Messages

HT3275 My Mac gave me a message saying that I had to create a new back up.I did this and I have lost a year's worth of back-ups.The crazy thing is that on my probook I still have them even though it is using the same time capsule.Any ideas if I can retrie

On being prompted to create a new back-up on my Mac by Time Machine I lost a year's worth of back-ups. The crazy thing is tht on my ProBook I still have them even though it uses the same Time Capsule, which to mind mind they are still there on the Time Capsule. Has anybody else had this experience or has any suggestions how I can retrieve the info on my Mac? Any help gratefully accepted! Thanks

cafranklyn wrote:
On being prompted to create a new back-up on my Mac by Time Machine I lost a year's worth of back-ups.
You might find useful advice on this Web page: Time Machine Troubleshooting, particularly item C13.
The crazy thing is tht on my ProBook I still have them even though it uses the same Time Capsule, which to mind mind they are still there on the Time Capsule.
Not necessarily. Each Mac using a particular Time Capsule has its own set of backups that are independent of those of any other Mac.
Has anybody else had this experience or has any suggestions how I can retrieve the info on my Mac?
Why are those backups so important to you? My advice is to move on and live without them.

Can I use the same Time Capsule to backup two MacBook Pros?

Basically, I want to know if I can backup my late 2009 MacBook Pro and my new one with retina display using the same time capsule? Maybe should I create different partitions on the time capsule?

Yes, provided your backup drive is big enough. For a Time Machine backup your backup drive should be at least twice the capacity of the drive it backs up. In the case of two drives sum the capacities of the two drives. Be sure you backup drive is at least twice that capacity.
You cannot partition a Time Capsule drive.

Use PCI-e video card and onboard video at same time

This is going to be really annoying if i cant use both at the same time. I am trying to get 3 monitors running and want to use the onboard display port or vga port alongside my PCI-E video card and it seems in the bios that only one can work at a time. I am assuming this means i have to use a PCI card with my PCI-e one to get more than the 2 i have at a time.
Has anyone gotten onboard working alongside a PCI or PCI-E card? Seems like a silly thing to not enable in the Board as businesses have a need for more than 2 sometimes.
Any assistance would be great.

lead_org wrote:
this is only possible with selected versions of the Thinkcentre equipped with AMD processors using SurroundView.
Intel equipped motherboard does not allow this.
Actually, a number of later Intel based systems allow for concurrent internal and PCI card-based graphics:
ThinkCentre M71e, M81, M82, M83/p (Small Form Factor) SFF/Tower, M91, M91p SFF/Tower, M92/p,M93/p SFF/Tower
ThinkCentre Edge 71, Edge 72, Edge 91, Edge 92
ThinkStation E30/E31/E32
http://support.lenovo.com/en_NL/downloads/detail.page?DocID=HT062228
I myself use a M91p with 3 monitors on a AMD HD 6670 plus a 4th on the DP motherboard (Intel HD2000) port.

Can more than one MAC use the same time capsule??

My husband and I both have 27" imacs. Since he just had a hard drive failure, I'm worried about my machine, and we'd both like to start backing our computers up. Can we both use the same hardware to do this?

Just make sure you have TC big enough to backup both macs! the final storage will be bigger than the disk space sum of your both macs as there will be incremental backups and snapshots in time going back!
Otherwise your TM app will scream bloody murder that you are runnign out of space as mine does :-)

Can I use Airport Express for printing and Ethernet printing at same time?

I've been trying to set up a couple of laser printers that were given to me recently. The printers are Apple LaserWriter 16/600 PS and Samsung CLP-510. The reason I'd like to have both up and running is because the black toner for the Samsung costs twice as much as the toner for the LaserWriter. I have two questions that I am hoping someone will be able to answer.
1) The CLP prints a test page just fine. I was finally able to get the Samsung printing while directly connected to my PowerBook G4 via usb (I had to install a Xerox Phaser 6100 driver to do so!). Today I tried putting the usb into my Airport Express (which I use for my portable internet and airtunes) and now the printer does not respond. When I try to add the CLP as a bonjour printer, I get an error adding the printer and the printer does not respond. Can someone offer some advice as to how and if the CLP may work via the Airport Express?
2) The LaserWriter prints a test page just fine. I purchased a transceiver (albeit not an Apple transceiver - this one says Asante Friendlynet, the guy I bought it from said it would work though). The transceiver is connected to the Ethernet port on the printer - and I have a yellow ethernet cable (?) running from the transceiver to the ethernet port on my computer. I read somewhere on the internet that I need to turn on Appletalk in order to use the printer via ethernet but when I went into my network settings to do that, there was a warning that I could not turn on appletalk for ethernet without forsaking my airport. Can someone offer some advice as to how and if the 16/600 PS may work via ethernet without disrupting my (working) airport express? Also - I did not receive any software or drivers with this printer but I read that I may not need to (they come with Tiger - ?) Is anyone able to confirm this?
Any help would be TOTALLY appreciated!
Leigh-Ann

Hello Kappy! Thank you for taking the time to reply to my question.
I should update you at this point to say that I can add the 16/600 PS printer through a process that I found called 'Direct IP printing over ethernet'. (I think I've done this correctly - but I honestly have no idea about network stuff). Here's what I did:
-went into system prefs and looked at the network settings under built-in ethernet tab. Under TCP-IP I found the IP address of my network host.
-In the Printer Setup Utility I tried to manually add the 16/600 PS printer. In the Printer Browser window, I selected IP Printer.
-Under IP printer, I selected LPD Protocol. I inserted the IP address copied from my network settings (above) in the address bar. In the Queue bar I typed in the name of the printer 'Apple LaserWriter 16/600 PS'.
-Again in the Printer Browser box I gave the printer a name and location. Finally, in the 'print using' box I selected Apple and then chose the model from the drop down list. 'Apple LaserWriter 16/600 PS fax v.2014.016'
-I got a dialogue box that asked about other installable features - clicked ok.
-when I tried to print a Word document, the Apple LaserWriter driver opened up and appeared in my dock and then I got an immediate error saying "network host ---.---.--.--- is busy, down, or unreachable..."
-I tried to repair permissions, but it did not resolve my issue.
-I noticed that even after adding the 16/600, it did not show up as a bonjour printer, but remained visible as a printer in my list (although grayed out).
I did some troubleshooting and the best I could find as a close match for my problem was that perhaps I had entered the name incorrectly in the Queue box...? If anyone knows how to find the appropriate name to insert I would sure appreciate knowing.
Finally - you should probably know that I received this printer from someone else. I guess I'm wondering if I need to be resetting network settings on the printer somehow? The test page lists the following:
Ethernet (Address: 08:00:07:84:78:e9)
EtherTalk: PostScript
NetWare: AutoSelect
TCP/IP: AutoSelect
IP address: 0.0.0.0
And - now finally, to answer your questions (the best I can, that is)
I did connect the yellow network cable directly into my laptop (right side, 4th input, counting away from me). I have a portable internet modem that plugs into my wall (for power) and then has a cable (Ethernet?) that goes into my Airport Express (LAN port?). I have no other router and there are no other inputs or outputs on my modem. My Airport Express has only one input for the modem, one mini input for airtunes, and one usb input (in which I have a cable connecting to my other laser printer (now working wirelessly via Airport Express!!)
Should I have these cables hooked up differently?
What is a Phonenet adaptor? My internet is provided via a cable service (not DSL). It is wireless and portable - I can take it to any major city in Canada and it works as long as it is plugged into a power source and near a window.
I really appreciate any help you can offer. At this point I must have spent the better part of almost two weeks trying to get these older laser printers up and running.
Thank you again.
Leigh-Ann

Can I back up a PC and a Mac using the same Time Capsule?

I'm trying to set up a PC and a Mac to backup on Time Capsule, but can't seem to get the PC to back up. Does anyone know if it is possible. My Mac works fine but I would like to also back up the PC.

I haven't tried it, but Genie Timeline Pro claims to be able to backup to the Time Capsule.
You might want to take a look. Contact the Genie folks to verify on this.
Genie Timeline Pro | Overview | Time Machine Backup Software for ...

Error : Old and new exceptions cannot be used at the same time.

HI ALL,
i build a new exception class with message class and i want to replace the
old exception that i had in the method ,what i did is delete the exception from the method
signature and add the exception class .
the problem is that when i try to activate the method i get error :
Old and new exceptions cannot be used at the same time.
CALL FUNCTION 'CALCULATE_HASH_FOR_CHAR'
      EXPORTING
        alg            = 'MD5'
        data           = iv_iss
      IMPORTING
        hash           = lv_issu
      EXCEPTIONS
        unknown_alg    = 1
        param_error    = 2
        internal_error = 3
        OTHERS         = 4.
    IF sy-subrc <> 0.
      RAISE EXCEPTION TYPE cx_user_mng EXPORTING
      textid = cx_user_mng=>wrong_isrs.
    ENDIF.
I want to use the new exception class ,
how can i avoid this error ?
Best Regards
Edited by: Joy Stpr on Jul 22, 2009 2:56 PM
Edited by: Joy Stpr on Jul 22, 2009 3:16 PM

Hi Joy,
Check this link.
[Old and New Exceptions Cannot be used at same time|Urgent problem, give me a hand;
Old and new exceptions cannot be used the same time, what does this mean???
Regards,
Lakshman.

I bought a bluetooth Bose speaker so I could listen to music from my imac in multiple rooms at the same time. I wanted to use BOTH my existing speakers using the headphone jack and add additional bluetooth speakers in other rooms, but the imac wants me to

I bought a bluetooth Bose speaker so I could listen to music from my imac in multiple rooms at the same time. I wanted to use BOTH my existing speakers using the headphone jack and add additional bluetooth speakers in other rooms, but the imac wants me to pick one or the other, is there a way to have both?

I asked same question
Any answers

Why can't I use Airplay/Bluetooth audio output and Guitar input at the same time?

Just trying to understand why it is not possible to use one of the 3rd party guitar input devices and have AirPlay/Bluetooth output turned on at the same time. it would be very nice to be able to play wirelessely to the stereo instead of adding yet another cable to the mix.
Thanks

I found the answer:
Use GarageBand for iOS with external output devices
You can use GarageBand for iOS with external devices, including AirPlay, Bluetooth, and HDMI-equipped media devices. When using any of these devices there is no support of audio input.
http://support.apple.com/kb/HT4622

Can i use a bluetooth headphone and a bluetooth cycle computer at the same time on a 4s?

I was wanting to get the wahoo bluetooth enabled cycle computer and heart rate monitor and use it at the same time as I use bluebird bluebuds bluetooth head phones. Does this many divices work at the same time?

No, you can connect only one bluetooth device at a time.

Use sound output hdmi and bluetooth at the same time?

Hi
Im using a Mac mini and its connected to my magnifier and then to my TV.
I just bought a new speaker that I placed in my kitchen. I would like to play the same music in the livingroom and in the kitchen at the same time, is it possible?
My speaker got bluetooth and AUX.
I tried using midi but it doesn't work, is it because of the hdmi?

Brian
Regarding the HDMI and Optical, yes they are both active, I have HDMI to TV and OA to soundbar, both work simultaneously and stand alone too.
Jules

Ipod nano (5th generation) - want to use headphones and charge at the same time

I have an ipod nano (5th generation). Do I need a special set of headphones to use the headphone jack and charge the ipod at the same time?

The iPod nanos have a 30 pin dock connector and a headphone jack. When you charge the iPod you use the dock connector therefore you can use and charge at the same time. You cannot use and charge the iPod shuffle at the same time. You might have the two mixed up.

Why can't i use wifi and bluetooth at the same time?

I recently bought a Philips docking speaker that has bluetooth connectivity for streaming music wirelessly from my Ipod Touch. The bluetooth/speaker works great, but, my Touch won't allow me to be online AND use the bluetooth at the same time. This is really annoying when you want to listen to music and check your emails. Am I doing something wrong?? Any help would be gratefully received.

I can use by BT headphones while my iPod is connected to the internet via wifi with no problems. I am uncertain how the Philips' system works. Does it have its own BT transmitter/receiver or doe it use the iPods to stream to its speaker?

I would like to connect both my iphone and ipod to my bluetooth headphones at the same time. Is there anything that I can buy to accomplish this

I am trying to connect both my ipod touch 5h gen and also my iphone 5c to my bluetooth headphones at the same time. I have been told because of the way the operating system works this is not possible. I used to be able to do this on my old non apple handset.
The reason I would like to do this is because when I am listening to my ipod and have my phone in my pocket it is not connected to bluetooth and I am missing important phone calls some of which are business calls.
Is there any type of device that i can get from apple to allow this to work.
Regards
Bodi

The iOS implementation of the Bluetooth Protocol does not permit use of a Bluetooth device with more than one source at a time.

Use the headphone jack output and bluetooth at the same time

Similar Messages

Maybe you are looking for