Use the Power Mac as a storage disk

Hi
I am setting up a iMac to be my main computer and was wondering if I could use my old Power Mac 4,1 as a storage disk? If so what would I need to do to have this happen?

I successfully File Share OSXes from 10.4.11 to 10.10.3 or any combination thereof in either direction.

Similar Messages

I downloaded the new Firefox but it constantly freezes, doing absolutely nothing, and I can't even close it from my Mac dock bar, I have to turn off my laptop using the power button as Firefox won't let me shut down. What can I do?

Hi
I recently downloaded the new Firefox (Firefox 4, I think - you can tell I'm very tech savvy!) and it constantly freezes, I can't do anything with it at all - I can't even close it from the icon in my Mac dock bar.
I have tried restarting my computer - though I have to turn it off by using the power button as as Firefox is open and totally unresponsive it won't let me shut down. About a minute after re-starting Firefox, restoring my tabs or starting afresh, it freezes again.
This is obviously very annoying and I'm not sure what I can do about it. Firefox is my preferred browser, and I'd really like to be able to use it again!

This is not a reply. I just want to elaborate on this problem.
My computer freezes occasionally when it is used after being sleep for a while. The spinning ball appears and everything is totally disabled. Nothing on the keyboard works.
The mouse moves, but does not work.
The only solution is to turn the power off and on (losing all data in open applications.)
I kept the System monitor running on the side to find out which program was running when the computer froze. The Monitor as well as all other applications froze, but the data showed:
Firefox 18.4%
Activity Monitor 0.9%
Firefox Plugin 0.2%
This is all the information I have. By the way, I am using iMac with OS 10.6.

How can I get on the internet with my newly purchased used G5 Power Mac if my ethernet port failed?

We just bought our son a used G5 Power Mac, but when we got it home and tried to hook it up to the internet, no luck. We changed ethernet calbes, tried plugging directly into wall cable (by-passing router), even tried to do manual config, but no luck. I took it to the Genius Bar today and they said the ethernet plug was broken, and they did not have anything for a "vintage" machine like this.
The Genius Bar tech told me to buy a USB Network Adaptor, however no one (Best Buy, Radio Shack, even searched the internet) seems to have them for Mac. What can I do to get this puppy connected to the internet and how much would it cost? Did we get screwed?
Here is the seriel # + info that the seller gave us:
Seriel # G8******QPM
Mac OS X 10.5.8 (9L31a)
< S/N Edited By Host >
The Powermac G5 Dual Core 2.3 is powered by a "dual core" 2 GHz PowerPC 970MP (G5) processor with dual optimized AltiVec "Velocity Engine" vector processing units (one per core), four double-precision FPUs (two per core) and a 1 GHz frontside system bus. It 's configured with 4 GB of DDR SDRAM, a 160 GB (7200 RPM) Serial ATA hard drive, a 16X dual-layer "SuperDrive"
Connectivity includes USB 2.0, FireWire "400" and "800", Two DVI port, optical digital audio in/out, two independent Gigabit Ethernet ports. All of the "multiple core" equipped Power Macintosh G5 models have three open PCI-Express (PCIe) expansion slots. The Power Macintosh G5 Dual Core 2ghs uses an easy-to-upgrade "anodized aluminum alloy" case with a removable side panel for easy access to internal components. Likewise, it is divided into four different thermal zones with nine computer-controlled fans for optimum cooling.

Sorry, the 2ndlink should be...
http://eshop.macsales.com/item/NewerTech/MXP2802NU2C/
Fully Mac OS X supported with with on-screen
menu set-up and full user manual.
http://eshop.macsales.com/item/Asus/USBN10/
OS Support Mac 10.4/10.5/10.6
I don't have those exact models, but have seen others here use them.

My Mac Mini was not sending a signal to the monitor. I powered down using the power button and now it will not start. When i power up I get a strange 2 tone sound, like a warning alarm. The fan starts, and the light comes on, but no screen

My Mac Mini was not sending a signal to the monitor. I powered down using the power button and now it will not start. When i power up I get a strange 2 tone sound, like a warning alarm. The fan starts, and the light comes on, but no screen.
I have tried with a wired USB keyboard and mouse using a single screen. Powered up with option pressed. No change.
Reset SMC no change

Run the Apple hardware test to see what it tells you. Run the extended test when prompted, which can take awhile.

Now that I upgraded to Maverick on my Mac air, I can not use the power button to shut down the computer anymore. any suggestions?

Now that I upgraded to Maverick on my Mac air, I can not use the power button to shut down the computer anymore. I now have to go to the apple icon in the upper left corner. Any short cuts instead of going to the apple in the top left corner and hitting shut down. Doing that all the time, I feel like I am back at work using a "Windows" computer.

This a is tricky one, but you can still do it. Instead of pressing the power button, hold it down for a few seconds and then you'll see the shut down options dialog pop up.
I guess they were trying to prevent accidental touching of that button. They did something similar with the Eject button a few versions ago, where you have to hold down Eject instead of just tapping it so that you don't pop out a CD by mistake.

Is there going to be a firmware upgrade for mountain lion customers that have a Macbook with a soild state drive so we can use the Power Nap feature?

Is there going to be a firmware upgrade for mountain lion customers that have a Macbook with a soild state drive so we can use the Power Nap feature?

here: http://www.apple.com/osx/whats-new/
"Power Nap requires a Mac notebook with built-in flash storage. May require a firmware update."
We have to wait for the Firmware-Updates. Some are already here: http://support.apple.com/kb/HT5394
And I am shure, that you will need for Power Nap one of the newer Macs with SSD from 2011 and 2012.

HI .. I have a new macmini 2.5 Ghz 10.7.3 Lion, had a problem today ,it froze so I could not shut down using mouse or tablet. used the power switch, when I tried to restart I got audible 'beeps' from it.

HI ....I have a new macmini 2.5 Ghz 10.7.3 Lion, had a problem today ,it froze so I could not shut down using mouse or tablet pen. used the power switch, when I tried to restart I got audible 'beeps' from it. I managed to restart it but kept getting a message come up on one ot the dual screens ' restart using the power swich to turn it off , then press it again to restart.'
This worked okay , but now it just keeps freezing whenever I start it up. I thought the issue could be my old Epson Expression 1680 scanner not being compatible , so I have unplugged it. I also had a look at the new memory I installed when I got it, but this seems not be the problem.
It is connected up to an Eizo Flexscan S2231W using a cable straight into the HDMI input , the other monitor is a small Acer using the VGA into Thunderbolt port.
When I turn the Eizo screen on first and then press the power button on the mac-mini, I hear the chime then the screen flahes the 'Digital no signal' message on and off for about 30 seconds , then the monitor comes on as normal. But it is still freezing up on me after using it for a while and I am having to use the power switch button to turn it off again.
Can anyone help please.

I really don't have an answer for that one. I guess that while trying to get things working correctly, I would use the most basic monitor I had which in your case would be the Eizon using the Thunderbolt port and adaptor.
When you boot into Safe Mode the startup is quite slow, but you should get the Apple logo and then the spinning gear below it (release the SHIFT key when it appears.) Then after a little more time you should see a gray progress bar appear below the spinning gear. When that disappears the computer will startup to a login screen.

What monitors will work with the Power Mac G5?

If I got a new Power Mac, would I need to get a new monitor (Apple Display), too? I have a Dell 17" LCD monitor (VGA). Would this work with the Power Mac?
HP P4 1.8GHz Windows XP Pro

Yes. You'll need to use the included DVI to VGA adapter to connect the monitor.

Noise on audio output when using the power adapter

I'm a musician and use my mid-2007 MBP 15" in my live rig. When I use the power adapter, I hear a buzz, sometimes accompanied by a slightly louder buzz that cycles on & off about 1x/second. There are a few weird things going on here:
1. The buzz does not happen all the time. That leads me to think it may be noise in the AC line that the adapter is plugged into.
2. The noise is heard when I use both the built-in audio output AND an external USB audio interface.
In any case, when I disconnect the power adapter and run my MBP on battery, the noise goes away completely. I can probably do this on most gigs, but I'm a little nervous since I run a FW drive, an external USB audio interface, and my midi keyboard (powered by USB) so I am putting a little heavier than usual load on the MBP's battery.
As I said, this may be a noisy AC line. Another guess is that it's the PMU inducing noise into the audio circuitry. I'm hoping a simple AC line filter can help me but I thought I would ask here first in case anyone else has dealt with this. TIA for any help!

I had a similar problem and fixed it with a $5 universal travel adapter. Yours might be different but here's my situation. Try it for little cost and see if it works.
I'm also a muso with an iMac running external KRK speakers via USB Mbox2. Previously I had a Macbook Pro and the same audio problem. I've been putting up with a very low volume, high pitch noise until now. I simply plugged the Mac power cord into a universal travel adapter which then goes into the wall. For Aussie users there is an adapter on ebay that will allow a 3 pin Aussie plug to go into female side and has a two pin Aussie male on the other. For US users you can probably get the same although there is a 59c product that will do the trick called a ground lift adapter. Applecare actually agreed this was the best fix and confirmed there would be no problems with power supply or Mac performance. What a gem ! God knows I've looked into all kinds of alternatives that could have cost hundreds instead of $5.

I cannot put my iMac to sleep using the power button since the Mavericks upgrade.

As the title states, I can no longer put my computer to sleep using the power button. I have to put it to sleep using the mouse. I miss the convenience of the power button. The window for energy saver is not like the display in support, it is missing the "Allow the power button to put the computer to sleep" option. Very strange. I am running an older desktop (2009) with Mavericks, fully updated. 10.9.4

A workaround is to setup a keystroke in the System/Keyboard/Shortcuts preference pane to sleep the Mac. Any function key or key combination will work.

Pioneer model DVR-111 BK is compatible inside the Power Mac G4

Hi,
currently I am working with Power Mac G4 (dual processor) and Mac OS X v10.3.3 as operating system. I would like to know if the DVD writer Pioneer model DVR-111 BK is compatible inside the Power Mac G4.
I wait for your kind answer and best regards.
Manuele Bossolasco
Power Mac G4 (dual processor) Mac OS X (10.3.3)

Hi, Manuele, and welcome to the Discussions!
The DVR-111 is a highly-compatible drive. Like with most non-Apple supplied burners, to enable burn support and use the burn capabilties of Apple's iLife applications using OS X 10.3.x, you'll need to downoad and install Patchburn 3.
Gary
1GHz DP G4 Quicksilver 2002, 400MHz B&W rev.2 G3, Mac SE30 Mac OS X (10.4.5) 5G iPod, Epson 2200 & R300 & LW Select 360 Printers, Epson 3200 Scanner

Where to buy used/refurbished Power Mac G5

Im looking to but a used/refurbished Power Mac G5. Does anybody have any advice of where I can get one?

Hi there, I bought one here in Sptember of 2009, quite happy with it, looked like it was a brand new Quad G5...
http://www.macofalltrades.com/AppleDesktopss/2.htm
Some reviews about the place scared me, but after reading reviews, I think the negativeness was unwarranted.
If I had any money, I'd buy this one myself...
http://www.macofalltrades.com/ApplePower_Mac_G5_2_5GHz_Quad_PCIe_2_0_250GBp/g525qp1.htm

After last maverick update macbook pro can't be shut down anymore - only by using the power button

Hello!
I hope that someone can help: after the last Maverick update I can't shut down the computer anymore - or restart. I need to use the power button. Furthermore several apps don't close when they are supposed to be closed - I always have to check with Force Quit. I could live with that, but not being able to shut down or restart the Mac is more than tiresome. Can anybody help?

These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter "BOOT_TIME" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Note the timestamps of the BOOT_TIME log messages, which refer to the times when the system was started. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged before the boot, during the time something abnormal was happening. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
For example, if the system was unresponsive or was failing to shut down for three minutes before you forced a restart, post the messages timestamped within three minutes before the boot time, not after. Please include the BOOT_TIME message at the end of the log extract—not at the beginning.
If there are long runs of repeated messages, please post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Some private information, such as your name, may appear in the log. Anonymize before posting.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A crash report has a name that begins with the name of the crashed process and ends in ".crash". A panic report has a name that begins with "Kernel" and ends in ".panic". A shutdown stall report has a name that ends in ".shutdownstall". Select the most recent of each, if any. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot. It's possible that none of these reports exists.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash or panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

I used the "erase free space " option in disk utility and now my imac says the disk is full and wont let me download songs. please help!

i used the "erase free space " option in disk utility and now my imac says the disk is full and wont let me download songs. please help!

You could try repairing permissions with disk utility, I don't think you will have the option to repair the drive but you could verify it.
This may help you delete the files that DU made but did not remove when erasing the free space.
http://macosx.com/forums/mac-os-x-system-mac-software/317204-no-disk-space-after -failed-disk-utility-erase-free-space.html
When you get your SL disk it will not have the iLife applications, that would have been on the second install disk that should have been with the computer. I forget which version of iLife you will need for SL but I think it is this http://www.amazon.co.uk/Apple-iLife-Single-User-Mac/dp/B003XKRZES/ref=sr_1_1?ie= UTF8&qid=1409607702&sr=8-1&keywords=apple+ilife+11
A search of the forums will confirm or deny this.
As to whether a clean install will cure your problem, i.e. partition the HDD and install I would expect it to be yes, but there are no guarantees it is an old machine.

Why can I not restart or shut down my imac without using the power button?

why can I not restart or shut down my imac without using the power button?

Reset the SMC and then try a restart or shutdown from the drop down menus.
Intel-based Macs: Resetting the System Management Controller (SMC)
Then if that doesn't work, backup because you have an OS X issue that will require either a repair or reinstall.

Use the Power Mac as a storage disk

Similar Messages

Maybe you are looking for