Use the same inquiry for a second card?
It is a YMMV thing. Some have reported getting away with it with others reporting fresh pulls for the new card.
tuolumne wrote:
sergiulucian88 wrote:
Is it possible to use the same inquiry with Cap One to obtain a second card on the same day? Just got approved for a Venture and it would be nice to squeeze another card out of the same inquiry. My AAA is already xx and I can't think of any other reason not to. Thanks in advance!It's not unheard of but as with any anomaly I would not count on it. Expect 3 hard pulls per card. Rejoice when when it's 3 for one pair.I applied for the Capital one GM power card and got approved. Got declined for the Cap QS few minutes later and didn't get any alerts from TU for another HP
Similar Messages
-
When my Ipod touch is in autolock I can only restart the device holding the sleep/wake button and home button at the same time for 10 seconds. While in auto-lock it is using battery power and will do so until the battery is drained. Whats wrong?
- Try a reset. Nothing is lost:
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears
- Connect the iPod to your computer and try to restore via iTunes. Try placing in Recovery mode if necessary to restore.
- If you can't turn the iPod completely off, let the batter fully drain. After charging for at lerast anhour try again
- If still not successful time for an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem. -
MDT Console with more then 15 machines, How to use the same drivers for more machines.
Hello,
I'm am looking for a solution to make our MDT design as effective as possible(as small as posible).
The Situation:
The company has more then 15 different computers added to the MDT console for the automated installation of Windows 7. The installations are done in 2 different ways, 1 with a local USB key installation (with the deployment folder on the USB key) and the other
installation is a network USB key installation (with the deployment folder on the server).
The local USB key exists for offices in parts of the world where the internet connection is poor.
The problem:
We have machines which can use the same driver for different kinds of hardware functions (LAN, WLAN, etc..)
If we add a new machine to the MDT and we don't check the box for "Import drivers even if they are duplicates of an existing driver" we will automatic use the driver which already exists in the deployment folder. If say half a year
later we stop using an older machine which "may" have drivers that are being used for other machines and we delete the machine from MDT we should
NOT check the box "Completely delete these items, even if there are copies in other folders". The problem is that this can also lead to a lot of unused drivers in the deployment folder also because we do not know exactly how many
computers are using a certain driver.
At the moment we have another deployment share with for each machine its own drivers installed (so some drivers will be multiple times in the deployment folder) as you can guess this becomes really big.(deployment folder of more then 24 GB). The advantage
of this is that we can delete a machine from the MDT list without having to worry if the drivers for that machine might be used by other machines. It is now just becoming to big in size(GB).
The Question:
Is there not an option within MDT that checks automatically if the drivers connected to a certain machine in MDT are being used by other machines? In this case we would check the box "Completely delete these items, even if there are copies in other folders"
and MDT would not delete the drivers which are still used for the installations of other computers.
Thanks in advance.
Greets,
ArieArie,
I think you are over-complicating this. Basically using drivers that already exist is the way to go. Otherwise drivers will be imported a second, third or fourth time. Which also takes up allot of disk space. If you're concerned about driver management,
then I would suggest to drop your concerns, since there is nothing to less you can do about this particular issue. As long as you don't delete the driver that's been imported earlier by another machine there is nothing to worry.
Ask yourself:
- how long am I going to support model x
- how many times do I want to update drivers
With selection profiles you can easily target which content needs to go where (on your USB drive of-course)
I can imagine that managing 25 shares for 25 different models, just because you 'refuse' to have old drivers in your share, or have removed support for some hardware models, isn't really time and energy efficient too.
If you take a look in your deploymentshare\control folders you will see some XML files. These XML files hold all the entries in your deploymentshare. So your drivers.xml and drivergroups.xml (depending on the number of groups you have) are going to be very
big XML files. These XML files are read by MDT to identify the objects in MDT and under which folder the objects are located.
It's not possible to create or have an dependency between driver files and hardware models, other then creating groups under "Out-of-box Drivers" and using selection profiles.
Another suggestion would be to decrease your number of hardware models drastically. On the other hand, having 25 Gb of offline media isn't really a big deal either. Portable and removable media of those sizes (32 and 64 Gb) isn't that expensive as it used
to be 5 years ago.
Don't get me wrong, I perfectly understand your desire to manage this, but MDT doesn't provide any other way, then the things I have pointed out to you here.
Good luck! :)
If this post is helpful please click "Mark for answer", thanks! Kind regards -
Trying to use the same ground for more than two channels (RSE configuration) with usb 6000
Hello,
I'm currently trying to set up a LabView code in order to get readings of voltage using 5 different locations simultaneously. I want to only use the first location as ground and obtain 4 voltage measurements between the ground and each one of the other 4 channels. I'm using a usb 6000 which for now allows me to use the same ground for only two channels. Is there a way to use the same ground for 4 channels?
Thank you,
MariaYou're right it is confusing the way I describe it so I ahve attached some pictures of the set up. The first figure is the cell filled with soil and the 5 probes inserted in it. The anode is placed at the left end of the cell and the cathode at the right end but they do not appear in the figure. I'm trying to use location 1 as gournd and take measurements of voltage from the following pairs: 1-2, 1-3, 1-4, and 1-5. The second figure is the DAQ I'm using. When I was trying to set up the RSE configuration, it was ussing ground A for the channels 6 & 7 (locations 2 and 3 in figure 1) but ground B for channels 4 & 5 (locations 4 and 5 in figure 1). What I am asking is which is the best way to use the signal from location 1 as the ground for all 4 channels. Is this more clear?
Thank you for your time!
Maria -
My Itouch 3rd gen can't be recognize by my computer but when I put my iphone4 its can be recognize I use the same cable for both of them.
Does it charge?
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
Why is my user id/pw not accepted by ICloud on my iPad but it is accepted by iCloud on my computer? I am using the same password for both.
Rebooting your iDevice
Hold down the Sleep (On-Off) and Home buttons together for about 10-15 seconds or until the Apple Logo appears - ignore the red slider if it appears - then let go of the buttons. The device should begin to start up.
Now try entering the information again. See if it works now. -
My iphone 4 locked up for several hours. i then tried to reset by holding down the home button and power button at the same time for 10 seconds and then the home button for 10 seconds. it is now completely black. what do i do? couldnt restore it in iTunes. Has anyone had this problem? Help!
Same thing happened to me today. I wasn't even using the phone for the past 6 hours and suddenly I can't connect to the internet, none of my internet apps would work - nothing. I tried to call AT&T from the iphone and it locked up - couldn't turn it off, change to the home screen - nada - brick.
Did the Home/Power button thing and that worked but this I've only had this phone for about 4 weeks and it's locked up more times than my 3GS did the whole two years I had it! Ridiculous -
I want to use the same account for all my apple devices (macbook air, imac and iphone). I can't see how I can amend the iphone account because it is in grey? I also can't remember the password for this account so i can't even delete it and start again?
Help!
ThanksDeleting an iCloud account only deletes it from the Device, not from iCloud. In iOS 8, the name of this setting changed to "Sign Out" as that is a better reflection of what actually happens. Your iCloud data remains on the server, available to devices still signed into the account, but the device you sign out of the account on is disconnected from the account, and as a result, the iCloud data from that account is removed from the device. It will redownload to the device should you sign back into the account.
The only issue you'll run into when you switch between accounts is with my photo stream photos older than 30 days. When you delete (or sign out of) and account, your photo stream photos are deleted along with the other data from the account in question. However, unlike other data which remains on the server and can redownload to your device when you sign back in, my photo stream photos only remain in iCloud for 30 days. When you sign back in, you will only get back my photo stream photos added in the last 30 days (as older photos are no longer in iCloud to redownload). Like other account data, any my photo stream photos on your other devices signed into the account are unaffected by this. If you want to keep older my photo stream photos on your device as you change iCloud accounts, save them to your camera roll before deleting (signing out of) the account. -
I have always used the same laptop for all of my iPhones but awhile back this laptop had a virus so my husband wiped out the laptop and now when I sync my iPhone I no longer receive my entire music library (including purchased songs) on my iPhone. How do I fix this?
kimberlyfromtopeka wrote:
Ok,thanks but, I should be able to something so that I am able to sync the entire library again not just the purchased songs.
If the non purchased music is not on your computer, how can it Sync to your iPhone... -
How do I use 2 apple id's on one mac? I have my apple id on my mac and would like to use the same mac for my wife's phone and ipad?
Correction, thats two itune id's
-
How do I use the same profile for two users on the same computer
I use my laptop both at home and at work. And in each venue I use a different user log on. But I wish to have firefox use the same profile for each user log on. How can I get firefox to point to the same profile for each user?
Note that only one user (Firefox instance) can use a profile folder at the time, so if you would switch the Windows user to another account then you would first have to close Firefox.
* http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
* http://kb.mozillazine.org/Shortcut_to_a_specific_profile
* http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox
* http://kb.mozillazine.org/Bypassing_the_Profile_Manager -
I have a iPad and iPhone with the same Apple ID, but on Game Center I have used the same id for both devices and they are two different profiles and I was wondering how to have one of the accounts on both devices.
Hi Jamesdwills,
Welcome to the Support Communities!
If you are using the same Apple ID on both devices, the Game Center profile should be the same.
Check out this information from the iPad User Guide. Try signing out of the Game Center on both devices and then sign back in with the correct Apple ID:
Using Game Center
http://support.apple.com/kb/ht4314
Game Center settings - iPad User Guide
http://help.apple.com/ipad/7/#/iPad9a13d039
Game Center settings
Go to Settings > Game Center, where you can:
Sign out (tap your Apple ID)
Allow invites
Let nearby players find you
Edit your Game Center profile (tap your nickname)
Get friend recommendations from Contacts or Facebook
Specify which notifications you want for Game Center. Go to Settings > Notifications > Game Center. If Game Center doesn’t appear, turn on Notifications.
Change restrictions for Game Center. Go to Settings > General > Restrictions.
Cheers,
- Judy -
How to Use the same iview for both KM End User and the KM Administrator
Hi friends,
*This is my scenario :* How to Use the same iview for both KM End User and the KM Administrator but with different Context
Menu Options.
i followed these steps but im getting same context menu for both KM End User and the KM Administrator .
Assign the role Content Administrator to the user km_admin. This is needed so that km_admin can change
the presentation settings for the KM Folder u201EReports_kmFolder‟.
Now, login with user km_admin. Navigate to the Km Folder reports_kmFolder through Content Administration
-> Km Content. Click on Details link of the folder reports_kmFolder.
Go To Settings -> Presentation. Click on the tab u201ESettings for You‟-> Click on button u201ESelect Profile‟.
Select the radio button corresponding to u201Elayout Set‟, and choose u201EConsumerExplorer‟ from the dropdown.
Click u201EOK‟.
Select both the check boxes corresponding to Items Affected as shown above, and click u201ESave‟
Now, remove the u201ESuper Administrator‟ role from the user km_admin and login with this user.
How rto resolve this????
Regards,
Prasad.Hello Prasad,
Most likely the user km_admin still has system principal roles assigned, even though you removed the Super Admin role, you should check that this user doesn't have any other admin roles, otherwise it will be considered a System Principal user and will therefore still have access to all content. For more information see http://help.sap.com/saphelp_nw70/helpdata/en/19/56f28fbd4e11d5993b00508b6b8b11/frameset.htm
Try creating a new user with just read access to the content and you should see that it will not be able to make any changes etc.
Regards,
Lorcan. -
Do I use the same password for apple ID and for iCloud?
I am not getting mail on my iphone or my ipad air!
When I put the password for my apple ID into icloud- it keeps reverting to another password. i.e. doesn't hold the apple ID password.
Is this a problem keeping the mail from getting to my phone and ipad?
DO I USE THE SAME PASSWORD FOR APPLE ID AND ICLOUD?
Help. and MERRY CHRISTMASWhat are you trying to do when you say "When I put the password for my apple ID into icloud- it keeps reverting to another password"?
Where are you doing when you try to enter your password? -
How to use the same keypair for both encrypt/decryprt-SunPKCS#11
Dear All,
Subject: To access iKey 2032 token, to retrieve public/private key from iKey 2032 token using pkcs#11 in sdk1.5, to encrypt/decrypt files.
When I separate the encrypt and decrypt part of java program, encryption program works well, whereas decryption program does not decrypt anything in the decrypt file (But there is no error). I printed out the public and private key in both encrypt and decrypt part of java program, its displayed differently::
Encrypt program:
SunPKCS11-rainbow_token RSA public key, 1024 bits (id 10, session object)
modulus: 114338469922835728259534620463489934081917342509275191892563243582065
74380495029336519036972702864998634664269499641616889325482699399559620370181624
72068116957594402738459932902481604823224406859575930392708524033619120886256353
58738237376491107769961041015109436347533548940674900728805627968145581222172729
public exponent: 65537
SunPKCS11-rainbow_token RSA private key, 1024 bits (id 11, session object, sensi
tive, unextractable)
Decrypt Program::
SunPKCS11-rainbow_token RSA public key, 1024 bits (id 12, session object)
modulus: 138556361758970660122782926386849783732271581948935425587968692317930
09262429353977097956605140384961825974398004270547046620971835394362397699233738
54481804748731546655197744692886754946373745924825650876065903334173666990347814
83727290962956934521650035029131176614982652900659797194703065074407857754883163
public exponent: 65537
SunPKCS11-rainbow_token RSA private key, 1024 bits (id 13, session object, sensi
tive, unextractable)
I suspect that every time program generates different set of key, therefore we need to store the generated key during encryption part (i believe it is to be in the keystore) and to use the same for decryption part. Could you please give me a tips how to do this?
Encrypt Program ::
import java.io.*;
import java.util.*;
import java.lang.*;
import java.sql.*;
import java.text.*;
import java.math.*;
import java.security.*;
import java.security.cert.*;
import java.security.interfaces.*;
import javax.crypto.interfaces.*;
import javax.net.ssl.*;
import javax.crypto.*;
import javax.crypto.spec.DESKeySpec;
import java.security.KeyStore.*;
* A class of Encrypt.
public class Encrypt
public Encrypt(){}
public void loginToken() {
Provider p = new sun.security.pkcs11.SunPKCS11(MQConfig.getvalue("SecurityPropertyPath"));
Security.addProvider(p);
KeyStore ks = null;
try{
String password = General.ReadFiles(MQConfig.getvalue("logFilePath"),"Simple");
password = password.trim();
char pin[] = password.toCharArray();
ks = KeyStore.getInstance("pkcs11");
ks.load(null,pin);
KeyPairGenerator kpg = KeyPairGenerator.getInstance("RSA",p);
KeyPair kp = kpg.genKeyPair();
kpg.initialize(1024, new java.security.SecureRandom());
FileInputStream in = new FileInputStream("C:\\ReportDBBE.properties");
FileOutputStream out = new FileOutputStream("C:\\ReportDBAE.properties");
Cipher cp=Cipher.getInstance("RSA/ECB/PKCS1Padding", p);
cp.init(cp.ENCRYPT_MODE,kp.getPublic());
CipherOutputStream cout=new CipherOutputStream(out,cp);
byte[] input=new byte[8];
int byteread=in.read(input);
while(byteread!=-1){
cout.write(input,0,byteread);
byteread=in.read(input);
cout.flush();
in.close();
cout.close();
catch(NoSuchAlgorithmException nsae)
System.out.println("No Such Algorithm Exception " + nsae.getMessage());
catch(NoSuchPaddingException nspe)
System.out.println("No Such Padding Exception " + nspe.getMessage());
catch(InvalidKeyException ike)
System.out.println("Invalid Key Exception " + ike.getMessage());
catch(IllegalStateException ise)
System.out.println("Illegal State Exception " + ise.getMessage());
catch(KeyStoreException kse)
System.out.println("Key Store Exception " + kse.getMessage());
catch(CertificateException ce)
System.out.println("Certificate Exception " + ce.getMessage());
catch(IOException ioe)
System.out.println("IO Exception " + ioe.getMessage());
public static void main (String args[]) throws Exception {
try{
Encrypt tl = new Encrypt();
tl.loginToken();
}catch(Exception e){
e.printStackTrace();
Decrypt Program ::
import java.io.*;
import java.util.*;
import java.lang.*;
import java.sql.*;
import java.text.*;
import java.math.*;
import java.security.*;
import java.security.cert.*;
import java.security.interfaces.*;
import javax.crypto.interfaces.*;
import javax.net.ssl.*;
import javax.crypto.*;
import javax.crypto.spec.DESKeySpec;
import java.security.KeyStore.*;
* A class of Decrypt.
public class Decrypt
public Decrypt(){}
public void loginToken() {
Provider p = new sun.security.pkcs11.SunPKCS11(MQConfig.getvalue("SecurityPropertyPath"));
Security.addProvider(p);
KeyStore ks = null;
try{
String password = General.ReadFiles(MQConfig.getvalue("logFilePath"),"Simple");
password = password.trim();
char pin[] = password.toCharArray();
ks = KeyStore.getInstance("pkcs11");
ks.load(null,pin);
KeyPairGenerator kpg = KeyPairGenerator.getInstance("RSA",p);
KeyPair kp = kpg.genKeyPair();
kpg.initialize(1024, new java.security.SecureRandom());
FileInputStream in1 = new FileInputStream("C:\\ReportDBAE.properties");
FileOutputStream out1 = new FileOutputStream("C:\\ReportDBAD.properties");
Cipher cipher=Cipher.getInstance("RSA/ECB/PKCS1Padding", p);
AlgorithmParameters algParams = cipher.getParameters();
cipher.init(Cipher.DECRYPT_MODE,kp.getPrivate(),algParams);
CipherInputStream cin1=new CipherInputStream(in1,cipher);
byte[] input1=new byte[8];
int byteread1=cin1.read(input1);
while(byteread1!=-1){
out1.write(input1,0,byteread1);
byteread1=cin1.read(input1);
out1.flush();
in1.close();
out1.close();
cin1.close();
catch(NoSuchAlgorithmException nsae)
System.out.println("No Such Algorithm Exception " + nsae.getMessage());
catch(NoSuchPaddingException nspe)
System.out.println("No Such Padding Exception " + nspe.getMessage());
catch(InvalidKeyException ike)
System.out.println("Invalid Key Exception " + ike.getMessage());
catch(IllegalStateException ise)
System.out.println("Illegal State Exception " + ise.getMessage());
catch(InvalidAlgorithmParameterException iape)
System.out.println("Invalid Algorithm ParameterException " + iape.getMessage());
catch(KeyStoreException kse)
System.out.println("Key Store Exception " + kse.getMessage());
catch(CertificateException ce)
System.out.println("Certificate Exception " + ce.getMessage());
catch(IOException ioe)
System.out.println("IO Exception " + ioe.getMessage());
public static void main (String args[]) throws Exception {
try{
Decrypt tl = new Decrypt();
tl.loginToken();
}catch(Exception e){
e.printStackTrace();
Configuration file::
name = rainbow_token
library = c:\winnt\system32\dkck201.dll
attributes(*,CKO_PRIVATE_KEY,*) = {
CKA_SIGN = true
attributes(*,CKO_PRIVATE_KEY,CKK_DH) = {
CKA_SIGN = null
attributes(*,CKO_PRIVATE_KEY,CKK_RSA) = {
CKA_DECRYPT = true
}Hi all,
Now i manage to use the same keypair for both encrypt/decryprt-SunPKCS#11. Below is my code woks well. In my code i hard coded alias name of certificate, did anyone knows how to read alias name of certificate from iKey token 2032??
import java.io.*;
import java.util.*;
import java.lang.*;
import java.sql.*;
import java.text.*;
import java.math.*;
import java.security.*;
import java.security.cert.*;
import java.security.interfaces.*;
import javax.crypto.interfaces.*;
import javax.net.ssl.*;
import javax.crypto.*;
import javax.crypto.spec.DESKeySpec;
import java.security.KeyStore.*;
* A class of Encrypt.
public class Encrypt
public Encrypt(){}
public void loginToken() {
Provider p = new sun.security.pkcs11.SunPKCS11(MQConfig.getvalue("SecurityPropertyPath"));
String myAlias = "349eefd1-845b-4ba4-9f88-06e9f5cb82f6";
/** to view alias name
keytool -list -v -keystore NONE -storetype PKCS11 -storepass PASSWORD
Security.addProvider(p);
KeyStore ks = null;
PrivateKey privKey = null;
PublicKey pubKey = null;
try{
String password = General.ReadFiles(MQConfig.getvalue("logFilePath"),"Simple");
password = password.trim();
char pin[] = password.toCharArray();
ks = KeyStore.getInstance("pkcs11");
ks.load(null,pin);
java.security.cert.Certificate cert = ks.getCertificate(myAlias);
Key key = ks.getKey(myAlias, pin);
if(key != null) {
System.out.println("key class: " + key.getClass().getName()); // -> sun.security.pkcs11.P11Key$P11PrivateKey
System.out.println("key bytes: " + key.getEncoded()); // -> null!!!!!!!
if(PrivateKey.class.isInstance(key)) {
privKey = (PrivateKey)key;
System.out.println("algo: " + privKey.getAlgorithm()); // -> RSA
//Signature rsasig = Signature.getInstance("SHA1withRSA");
//rsasig.initSign(privKey);
//rsasig.update(data.getBytes());
//byte[] sigBytes = rsasig.sign();
pubKey = cert.getPublicKey();
//System.out.println("signed bytes: " +sigBytes);
//return sigBytes;
//KeyPairGenerator kpg = KeyPairGenerator.getInstance("RSA",p);
//KeyPair kp = kpg.genKeyPair();
//KeyPair kp = kpg.generateKeyPair();
//kpg.initialize(1024, new java.security.SecureRandom());
FileInputStream in = new FileInputStream("C:\\ReportDBBE.properties");
FileOutputStream out = new FileOutputStream("C:\\ReportDBAE.properties");
Cipher cp=Cipher.getInstance("RSA/ECB/PKCS1Padding", p);
//cp.init(cp.ENCRYPT_MODE,kp.getPublic());
cp.init(cp.ENCRYPT_MODE,pubKey);
CipherOutputStream cout=new CipherOutputStream(out,cp);
byte[] input=new byte[8];
int byteread=in.read(input);
while(byteread!=-1){
cout.write(input,0,byteread);
byteread=in.read(input);
cout.flush();
in.close();
cout.close();
catch(NoSuchAlgorithmException nsae)
System.out.println("No Such Algorithm Exception " + nsae.getMessage());
catch(NoSuchPaddingException nspe)
System.out.println("No Such Padding Exception " + nspe.getMessage());
catch(InvalidKeyException ike)
System.out.println("Invalid Key Exception " + ike.getMessage());
ike.printStackTrace();
catch(IllegalStateException ise)
System.out.println("Illegal State Exception " + ise.getMessage());
catch(KeyStoreException kse)
System.out.println("Key Store Exception " + kse.getMessage());
catch(CertificateException ce)
System.out.println("Certificate Exception " + ce.getMessage());
catch(IOException ioe)
System.out.println("IO Exception " + ioe.getMessage());
catch(UnrecoverableKeyException unrke)
System.out.println("Unrecoverable Key Exception " + unrke.getMessage());
public static void main (String args[]) throws Exception {
try{
Encrypt tl = new Encrypt();
tl.loginToken();
}catch(Exception e){
e.printStackTrace();
Your help is very much appreciated!!!!
Maybe you are looking for
-
Moving hard drive from iMac G5 to eMac 700Mhz
Hi, Hard drive in my eMac failed recently and on the top of that iMac G5 logic board stopped working (known problem). Now I wonder if I could move over iMac's hard drive (and Airport card) with 10.4 on it to my eMac. Is that possible? Or do I have to
-
My project won't display on tv
Hi, iMovieHD to iDVD 5. I am trying to create a photo project with Ken Burns effect and audio. It plays fine on my Mac, but won't play on the tv in my dvd player. Consists of 10 photos, 4 titles and 2 audio tracks. Can anyone tell me what I'm doing w
-
i think it all started when i dropped from 2meters high. When i connected it to my laptop, using itunes... my ipod's name turned into 'ipod' capacity : n/a software version: n/a serial number : n/a Help guys!
-
DDIC objects not existing in standalone WAS
Hi all, Here is our pb : We started a bsp developpement on a R3 system with WAS6.20. We transported our code (only the code concerning bsp application) to a new standalone WAS 6.40. But on this new machine a lot of ddic elements were not available. E
-
Apple TV vs. PS3 for photos & home movies
I'm sure some of you have both of these units and have a comparison as to which unit displays photos & home movies better (sharpness, color, etc.) I recently bought the Apple TV and I'm not that impressed with the photo quality and 960x540 home movie