Use the system lang of AIR applications auto update.

Hello,
I recently used the auto update framework for my AIR application, this works fine but i have a small problem.
I made some reasearches and i found AIR uses the system lang by default. When i install my package for the first time, the lang is my sytem lang but when i find a new update after running auto update of my app, the AIR updater window doesn't use my sytem lang, which is french, but uses english lang. I'd like to put this window in french.
Thanks.

Try loading and using the add-on from this link: https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/
Many add-ons do in fact work if you force them to run. The procedure to roll-back is given in this article: [[installing previous versions of firefox]]
Unfortunately the official Firefox policy is that you downgrade to 3.6 which is supported for a while longer, and not the now unsupported Firefox 4. If after installing and running the ''add-on compatibility reporter'' you still have problems there are ways around the official policy.
I think it is absurd that Firefox 4 may be used by tens of millions of users one day and a few days later those that upgrade to Firefox 5 should be not only told not to use a now unsupported browser, if they need to revert due to problems, but are actually obstructed in attempts to do so. See also [/questions/840397#answer-205154]

Similar Messages

Authenticating AIR application auto-update

Hi, I'm building documentation for my desktop-product with RH8 and AIR SSL auto-update functionality. It looks like I need to expose any revision of my documentation on Internet for the auto-update. My company does not want to expose it freely since it is intellecual property. Is there a way to protect the revision with some authentication that would work with the AIR auto-update mechanism? Thanks in advance.
--dh

Same situation like ours! :-)
If your documentation on the internet is accessed using "https", then that's the link that will be used for auto-updating and thus an authentication box will be displayed anytime a request for an update is made.
Good luck.
K
P.S.: Any chance you encountered this problem with AIR and external links: http://forums.adobe.com/thread/422870?tstart=0

I have purchased a macbook air with 64 gb hard disk. the available space is only 10gb. With this available space, i can't use the system effectively. kindly advise.

I have purchased a macbook air with 64 gb hard disk. the available space is only 10gb. With this available space, i can't use the system effectively. kindly advise.

You should have bought one with a larger SSD. You can regain some space by disabling the sleepimage file:
To disable safe sleep, run the two following commands in Terminal:
$ sudo pmset -a hibernatemode 0
$ sudo nvram "use-nvramrc?"=false
When done, restart your computer. Now go delete the file "/private/var/vm/sleepimage" to free up some hard drive space. When you put your computer to sleep it, should happen in under five seconds; my MacBook now goes to sleep in two seconds.
[robg adds: To state the obvious, with safe sleep disabled, a total power loss will wipe out whatever was open on your machine. To enable safe sleep mode again, repeat the above commands, but change hibernatemode 0 on the first line to hibernatemode 3, and =false to =true on the second line. You'll then need to reboot again. Personally, I prefer the safe sleep mode, even with the slower sleep time and hard drive consumption -- even if for no other reason than it's great when changing batteries on a flight.]
You can also delete unneeded files:
Freeing Up Space on The Hard Drive
1. See Lion/Mountain Lion's Storage Display.
2. You can remove data from your Home folder except for the /Home/Library/ folder.
3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
4. Also see Freeing space on your Mac OS X startup disk.
5. See Where did my Disk Space go?.
6. See The Storage Display.
You must Empty the Trash in order to recover the space they occupied on the hard drive.
You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located.

System extension cannot be used The system extension "/System/Library/Extensions/IOStorageFamily.kext" was installed improperly and cannot be used.

What's up with this? The drive in question is an 80gb IDE external drive, USB connected.
System extension cannot be used
The system extension “/System/Library/Extensions/IOStorageFamily.kext” was installed improperly and cannot be used. Please try reinstalling it, or contact the product’s vendor for an update.

Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

Using NSIS to install an AIR application

Can I use NSIS to create an installer for an AIR application? I won't be distributing the application.air file, instead I will be distributing the unpacked/installed application files that are generated by the application.air file. I believe Adobe has no legal right to the unpacked/installed application files therefor Adobe can't dictate how those files are distributed, but I need that confirmed if possible.
The default AIR installer looks very intimidating to end-users due to the design and the "this app will kill your computer and then kill you" messages, and I really don't want end-users to be put off by it, nor am I going to pay for a code-signing certificate when the application itself is free of charge. Adobe really need to take another look at the way AIR applications are installed, the current process/design is a joke.

I would be very interested to know if you had any luck using NSIS to install your AIR application. I have hit a roadblock using Adobe's sidecar installer because my AIR file is too big. I'm looking at having to split out the content so that my AIR file is small, and then install the content separately. However, I need to install the content to app://, not app-storage:// so that all users can use the application. I'm finding this difficult with Installshield Express, so I'm now attempting to do it with NSIS.
Kevin

HT4759 I am using the first Mac book air manufactured by apple.i am unable to sync my iphone 4 (ios 7) with it.Nor am I able to sync all my devices through icloud.

I am using the first Mac book air manufactured by apple.i am unable to sync my iphone 4 (ios 7) with it.Nor am I able to sync all my devices through icloud.

If you are indeed using 10.5.8 as indicated in your signature you will first need to upgrade to Snow Leopard; this is available in the Online Apple Store. You will then be able to uprade to Lion - again available in the Online Store where you will get a code to enable download from the App Store in Applications. This will enable you to use iCloud and run the latest iTunes.

How to use the same component in different applications

Hi All,
I need to use the same component in different applications. i.e In opportunity, Quotation & Promotion.
The Search help view in the component PRD01QR should be used in all these components but with different search criteria.
With help of the DO_determine_configuration, different view configurations are possible but Different search criteria is not possible.
for Eg. search parameter without DDLB, F4 options in another components.
How can I control the behavior of the search view in different applications with restricting the field properties?
Is it possible to find out where and in which component these search_help_search component is used?

Hi Harry,
Is it possible to find out where and in which component these search_help_search component is used?
ans: I am giving an Example for your question go through that u might get clear about this.
Ex: BT115IT_SLSO sales order component
below screen they component usage using for populate the product search component.
please let me know any help required .
Regards,
vishwa.

I installed bootcamp but became a pain to use so I unistalled it. Now every time I turn my Macbook pro on it keeps asking me what startup disk to use. I tried using the system preferences to correct this but it hasn't worked. Can someone help

I installed bootcamp but became a pain to use so I unistalled it. Now every time I turn my Macbook pro on it keeps asking me what startup disk to use. I tried using the system preferences to correct this but it hasn't worked. I even restored my mac back to factory settings but it still asks me what startup disk to use. I have looked everywhere for a solution but one anywhere

Delete the System Preference .plist file (preference file) and when rebooting and #2 Reset the PRAM
Deleting the System Preference or other .plist file
..Step by Step to fix your Mac
Then head to System Preferences > Startup Disk and select the OS X volume to boot from.

HT201250 I had to replace the hard drive in my old MacBook. I replaced it. Installed OSX10.6. Then using the system software I reinstalled data from my Time Machine backup. On completion it asked for my password. It is not accepted. I am locked out how I

I had to replace the hard drive in my old MacBook. I replaced it. Installed OSX10.6. Then using the system software I reinstalled data from my Time Machine backup. On completion it asked for my password. It is not accepted. I am locked out how I overcome this?
I was already using 10.7. But only had the disc for 10.6.

Sorry I am new to this. Am I in the right area? I am using my iPhone to make contact. I am worried.

I want to put windows 7 on my iMac. Do I use Windows 7, 64 bit System Builder or do I use a "retail copy" of the Windows 7, 64 bit ? Microsoft says I should use the System Builder copy. A technical support individual from Apple said use the "retail copy"

A Microsoft technical advisor said that the "retail copy" of Windows 7, 64 bit Home Premium would not work with Boot Camp to put the Windows operating system on the IMac. She said that I would have to use the System Builder copy of Windows 7 to put it on my iMac. An Apple technical advisor told me that I had to use the "retail copy" of Window 7 because that was the one used by Apple when they developed the Boot Camp program. I have also seen some articles from Apple that suggests that both copies of Windows 7 would work OK. Does anyone have any experience that shows which one or both I should purchase to put on my computer?

Welcome to ASC!
I used the 64-bit System Builder Edition when I bootcamped my 2010 iMac a couple of years ago. Worked perfectly--installed a very lean system. Without all the extra cr@pware that comes preinstalled on name-brand Win computers, the SBE OS actually works darned well.
However, that was under Mac OS 10.6.8 which remains on that computer for compatibilty reasons not related to Windows. Haven't BCed any newer Mac OS, so your mileage may vary.

Help with this error message: System extenstion cannot be used:The system extension "/System/Library/Extensions/AppleACPIPlatform.kext" was installed improperly and cannot be used. Please try reinstalling it, or contact the product's vendor for an update.

I have this error message:
System extension cannot be used
The system extension “/System/Library/Extensions/AppleACPIPlatform.kext” was installed improperly and cannot be used. Please try reinstalling it, or contact the product’s vendor for an update.
Please help. Is there a update or how do I reinstall?
Thanks,
John

I submitted the above question, later finding that it has been answered by Buller already. No one need reply as Buller's answer seems to solve the problem for others, and I'll try that.
Jim

Using the system variable cpInfoQuizAttempts

My content is run through an LMS. I am trying to used advanced code using the system variable cpInfoQuizAttempts so that a caption appears when the variable value = 3. Apparently, I can't utilize the value of this variable; in fact, I can't even display it's value in a caption. I am trying to create advanced code on a course page that displays a caption like "You canot take this quiz again because you have already taken it the maximum number of time possible." once someone has taken the course the maximum number of times. I assume this is the variable Captivate is using to show # attempts on the results page. I tried this with just a user variable but the value of the user variable is not stored or saved on the LMS. Therefore, if you have a maximum number of 3 attempts and someone takes the quiz twice, if he logs off and logs back on, the previous value (2) is not saved and the value reverts to the default (0).
Any ideas how this could be done?
KO

I'm pretty sure that all user defined variables are saved in suspend_data in the LMS. Therefore your user defined variable should be there, but I don't see any way how Captivate would be able to retrieve it again out of the box.
I think that the cpInfoQuizAttempts variable refers to attempts done in the same "session". So if fail the test and then retry and fail it would have a count of 2. However, once the user exists the course the variable is no longer available to Captivate.
As Rick said most LMS' have a function to define max / min attempts of a quiz. However, this most likely requires that you publish the quiz as an independant SCO since the "lockout" would apply for that SCO. Basically if you only have one SCO then your users wouldn't be able to access the content or the quiz if they exceded the max attempts. Your content should therefore be one (or more) SCO(s) and your quiz one separate SCO.
If I'm not mistaken it's also possible to define the max / min attempts in the SCORM manifest, but this is very geeky.
If you own and can use Flash you could solve your problem two ways:
1. Create a Flash file that retrieves the user defined variable from the LMS suspend_data and then sends that back into Captivate. Import the Flash file into your Captivate project.
2. Create a Flash file that stores and retrieves the attempts in a Shared Object on the users PC and then brings the stored value back into Captivate. Import the Flash file into your Captivate project.
/Michael
Visit my Captivate blog with tips & tricks, tutorials and Widgets.

How can I use the system clock.

My java program need to use the system clock to initiate some functions. Is there a method to do this or do I need to create one ??
Any help appreciated.

The following article will likely contain information useful to you:
Working in Java time: Learn the basics of calculating elapsed time in Java

Extracting Time without using the System Date and Time

Hi, can I know how to process a task at this particular time eg. 6PM everyday without using the System Date and Time..
Do I need to use a Timer to get this done or is there any other solution to do this? Can give me a few hints? Thanks in advance =D

You could use a timer...assuming you had some good reference point when you started so you would know that from your starting point it's now 6pm.
I thought I saw you asked this question once already...and you were given a similar answer....I think by Sylviae?

Can Firefox be set to use the system default printer?

I would really like it of Firefox would use the system default printer set in the control panel, similar to the way office programs do. Is there no setting in about:config to do this? Or an add-on perhaps?

I really, really wish Firefox would change this, but I did find one thing.
In about:config I set:
print.print_printer to null
print.save_print_settings to false
Now it seems to use the system default. And it doesn't remember any changes with in a session, or from one session to the next. It always uses the system default printer.
I realize different people have different preferences. But on my system the default printer changes automatically depending on what wireless network I'm on at the moment. I wanted Firefox to reflect that.

Use the system lang of AIR applications auto update.

Similar Messages

Maybe you are looking for