Use.typekit makes forum difficult to reach

When trying to enter this forum the browser hangs endlessly on "Waiting for use.typekit.com..."
It happens on the Photoshop forum too.
Has anyone else had this problem recently?

Plus one. The only reason was able to get here on Friday is someone posted the registration URL in the regular OTN DB General forum. Although it may well have been FUE on my part.
I don't know how it works for Linux but I think with windows the Forum Registration menu link was populated the first time we run the MSI. But if we do (as some of us have done) a partial disinstall then we have zapped that link gets and it doesn't get re-created if the C:\oracleXE directory still exists. I think. Anyway, I'm sure I could probably have registered here anyway on Friday even though my install had failed, if only I had known. In short, a documentation bug rather than a flaw in the process.
Cheers, APC

Similar Messages

In my application on openeing a page mozilla browser history shows more than one entry which inturn makes it difficult to go the previous page using back button. It works fine in I

In My application on opening a page using TOC, mozilla browser shows more thanon entry in history, which makes it difficult to browse the previous page using back button. Although it works fine on IE
== URL of affected sites ==
http://
== User Agent ==
Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.2; SV1; .NET CLR 1.1.4322; .NET CLR 2.0.50727; MS-RTC LM 8)

In My application on opening a page using TOC, mozilla browser shows more thanon entry in history, which makes it difficult to browse the previous page using back button. Although it works fine on IE
== URL of affected sites ==
http://
== User Agent ==
Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.2; SV1; .NET CLR 1.1.4322; .NET CLR 2.0.50727; MS-RTC LM 8)

My iPhone 4 microphone that handles standard voice/sound cannot pick-up sound unless the speakerphone, or a headset is used to make/receive calls the other end caller cannot hear me. Any Suggestions? This seems to be common on forums.

My iPhone 4 microphone that handles standard voice/sound cannot pick-up sound unless the speakerphone, or a headset is used to make/receive calls the other end caller cannot hear me. Any Suggestions? This seems to be common on forums. Thank You

Same issue on my wife's iPhone 4S. I suspect it is related to the recent 6.1.2 iOS update (Note: I have a 3S and the update did not cause any issues).
I've tested both bottom and top mics on the 4S using video recorder and both mics work fine. Speakerphone and headset during calls also work fine. The issue is only related to the bottom mic while making calls. I can hear the caller but the caller cannot hear me. If I hold the mic very close to my mouth, the caller can hear a very low level signal.
The problem appears to be software related, not hardware.

Photoshop Elements9 has a dark background which makes it difficult to use for a sight impaired person. Is it possible to change it to a light background.

Photoshop Elements9 has a dark background which makes it difficult to use for a sight impaired person. Is it possible to change it to a light background.

Photoshop Elements9 has a dark background which makes it difficult to use for a sight impaired person. Is it possible to change it to a light background.

Not sure how to use Movie Maker with my HP TrueVision HD webcam

I've never used Movie Maker before. When I fire it up and double-click Webcam video in the ribbon I get a splash screen saying "Please Start YouCam"
I assume it is possible to make a video using the build-in webcam, and to save it to disk.
I need some help understanding how to do that.
Thanks.
Roricka

Peer One,
You know, if you hadn't replied, other people who might be inclined to actually help, might see that there were "0" replies, but now someone may actually think I've received helpful advice and skip it. If that seems harsh, would you mind taking the time to address a couple of meta-issues?
1. You state that Movie Maker is a Microsoft product. Now, my question was how to make Movie Maker work with the built-in camera on my HP laptop. Movie Maker itself seems to launch just fine, but it appears to be unaware of a piece of HP hardware, hence my post to an HP forum. How do you figure it is helpful to inform me (as if I didn't know) that Movie Maker is made by Microsoft? Does it matter if movie maker is made by Acme Software? My problem is essentially that I can't get Movie Maker to see my HP camera. Are you just attempting to scold me for not realizing Movie Maker is not an HP product? Is the forum ONLY to assist people having difficulty with HP software?
2. You write "you might want to read up the instructions." Are you just being passive-aggressive or is this comment actually intended as assistance? Now, I fully expect you to double-down at this point. I know that almost all respondents to forums who make these kinds of remarks never apologize and admit they are simply being critical with no attempt to be helpful. Unless you believe that by stating the obvious, it is helpful. (Do you?) While it is of little value to explain this, let me say that the Microsoft instructions for Movie Maker that I was able to find (note: MM itself does not include a help entry on any of its ribbon menus or sub-menus -- and if you are unaware of that, don't you think you should have investigated it prior to taking on the role of scolder-in-chief for this thread?) did not explain how to activate one's built-in camera. I firmly believe such a help topic is covered somewhere, but I simply couldn't find it after considerable searching. I didn't feel it necessary to point that out in my question -- I guess I just assume people are more charitable or willing to help than was the ONE PERSON WHO COMMENTED AND THUS OFFERED HIS "1" UNDER THE "REPLIES" COLUMN.
3. You ask if my laptop has a built-in camera. You know something? I know my four sentence post was a trifle difficult for some folks to read and understand (OK, now I plead guilty to a charge of passive-agressiveness), but don't you feel the use of the phrase "built-in webcam" (ok, ok, so I misspelled it "build-in" instead of "built-in") should have been a pretty strong clue that my laptop has a webcam?
Well, I wish there was some way to totally delete your extremely condescending and unhelpful response. But maybe someone who actually can offer some assistance will ignore the "1" and make it a "2" for the number of replies.
Thanks for your attention.
roricka

Instead of using the make file can you build nirlpk.sys using MS WDK 8.0 on VS2012?

After downloading the NI nimhddk_windowsWDM-2 and -1
Instead of using the make file I built nirlpk.sys using MS WDK 8.0 on VS2012
I copied the source files out of the dir /nirlpk to the MS template for WDM drivers
It built after turning warnings as errors off.
After uninstalling the NI_DMX driver I tried to install the RLP driver that consisted of nirlp.inf and nirlpk.sys
I got this message:
Windows found driver software for your device but encounted and error while attempting to install it.
PCI-6602 RLP WDM
Driver is not intended for this platform
Is the nirlp.inf file correct for loading on Windows 7 64 bit?
Any ideas?

I have now altered the example along lines
suggested by ghaneman*, who pointed out that
a trusted application did not need to use the
FileOpenService/FileContents just to get an
InputStream.
* Mentioned on 'File associations / sandboxed app.'
http://forum.java.sun.com/thread.jspa?threadID=785224
The altered code is..
/** Load a file into the editing area.
@param path A string representing the path to the desired file. */
public void loadFile(String path) {
    // first try as if this were a trusted application..
    if (!path.equals(".")) {
        try {
            FileInputStream inputStream = new
                FileInputStream(path);
            loadFile(inputStream);
        } catch (Exception e) {
            // we do not have trust, use the FileOpenService
            loadFileByFileService(path);
    } else {
        // we only have a directory, use the FileOpenService
        loadFileByFileService(path);
public void loadFileByFileService(String path) {
    try {
        if (fileOpenService==null) {
            fileOpenService = (FileOpenService)ServiceManager.
                lookup("javax.jnlp.FileOpenService");
        fileContents = fileOpenService.openFileDialog(path, xtns);
        // the user may have cancelled the action..
        if (fileContents!=null) {
            loadFile( fileContents.getInputStream() );
    } catch(UnavailableServiceException use) {
        use.printStackTrace();
    } catch(IOException ioe) {
        ioe.printStackTrace();
}If the user launches the trusted version, and
selects 'always trust' for the (self signed)
certificate, the end user can thereafter double
click a file and see it appear in the application's
editing area with no further user interaction.

How can I make sure I only see what is on my ipad instead of everything I have in the cloud? Since upgrading to 10S 7 I see every programme I have ever bought - which makes it difficult to see the ones I want to watch now.

I buy programmes etc for the whole family and it used to be that on each ipad I could only see the icons for the programme I chose to sync to the ipd/ipod etc. However, now every programme I have ever bough is dospayed which makes it difficult for family members to know what they can watch and what they can't. How do I resolve this as it has only been sonce the IOS upgrade?

If these are videos, try going to Settings>iTunes & App Store and turn off Videos under Show All.

How can I tell what took someone used to make a flash...

When I'm out surfing around I come across Flash that I'd love
to make a one of. For example I like to do photography and I see a
Flash window that has thumbs across the bottom and a larger picture
on top, and then if you click on one of them you get a much larger
pictures, I looked at the source for the page, but I can't see any
clue as to what tool make that Flash...
If I like what someone has created in Flash, how can I figure
out how they made it?
Thanks
Kelvin

I don't have problems with many things, but being called a
THIEF is one of them.
I did not say that I am helping the community move forward by
decompiling others work.
I did say that the community CAN move forward FASTER when
people stop getting hung up on the idea that their code is
something SACRED.
If you develop something new that has never been done before,
then you have something that you can protect.
If you want to see how other people did it, so that you can
better understand the different methods that can be used to do that
one thing, you are not stealing.
I know many people that take the same stance that I do.
People that look at code to understand it. Most of the things I can
do today because I looked at other peoples code. I didn't copy it,
I took hints from methods and used them to create my own methods.
Sometimes I decompile something, knowing how I would do it,
to see how that person did it. If they have any hints at better
methods that I could use to make my code faster, better. To say
that the majority of people steal is to take the standard American
view on the world. Americans tend to believe that everyone else is
a thief, a crook, whose only intent is to do wrong. (I am BTW, an
American, and I am very proud to be an American) If you step back,
and open your views, and your code, you will find a much different
picture painted. The majority of people aren't looking for
something to steal, but they are forced to take methods that people
would consider "stealing" to learn to do the things that they want
to do.
There are many good reasons to look at code, with or without
the permission of the person who wrote it.
In the end, these are my views, and I am not alone in them.
Those are your views, and you are not alone in them. If you lose
respect for me, then you do. I am here to help who I can help with
the knowledge and experience that I have gained over my time as a
web developer. I only entered these forums recently, and therefore
don't have anywhere near as many posts as you do, but that doesn't
make my position any less accurate. The advice I have given people
is correct and true, and I offer up the things that others don't.
Even if you do not believe in using decompilers, decompilers exist,
and have their uses, therefore should be mentioned. In the end, I
lose respect for you, who I have held in VERY high regards since I
entered this forum, because you are closed minded, and unwilling to
offer the full information to people who are asking.
When I create code, I consider it open-source code. I am not
about to try to fool myself into thinking that people can't see the
code if I don't want them to. But why would I not want them to.
Because I spent hours writing it myself. At least, if others see
it, they won't have to spend as much time to get the same effect. I
know that some of these people will take it verbatim to use in
their projects, and not give me credit. But I don't expect credit.
It is a few lines of code, why should I get credit for writing it,
when I am not the first, nor the last, to write the same code.
Please do not respond to this. We both have better things to
do than sit and debate about the merits of open source code, and
learning by looking.

What program is apple using to make there website?

I was wondering (because I would like a website as powerful as apples and as easy to use as iweb). What Program did apple use to make there website and do you need multiple programs to do those things such as. the way buttons are animated not using flash, and the search function, and forums and store, etc.
Anyways, this aught to be an interesting discussion

There is really no way to know what Apple uses to build their site.
There is no reason why you can not make a good looking, fast site in iWeb. The only reason why your website may not look as nice is because you are probably not a professional website designer like the people behind Apple's site.
If your site is too slow consider reducing the number of images you use on your website, making sure your text is not converted to images, you switch to a real web hosting provider and not rely on MobileMe, and you run your iWeb website through a web site optimizer.
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

Using Typekit fonts offline?

New here. I spend a great deal of time working offline in InDesign, as well as Illustrator and Photoshop. However, when offline, Typekit fonts that I have synced do not appear in the font lists of those programs and must be replaced in the documents that I am working in order to proceed. It's very frustrating. Does anyone know if it is possible to get around this? If not, I will have to stop using Typekit fonts.

Hi Jim,
I'm sorry you ran into trouble here. Typekit fonts should work offline. You just need to make sure you're signed into the Creative Cloud app and your fonts are synced before you go offline.
When you sign out of the CC app, the fonts are unsynced so you just need to sign in and sync before going offline.
I hope this solves the issue. If not, feel free to drop us a line at: [email protected]
Cheers,
Benjamin

How to use Typekit-Desktop-Fonts in other apps or e.g. Font Explorer X Pro on OS X

How can I use Typekit-Desktop-Fonts in other apps e.g. Pages or Font Explorer X Pro on OS X?

Hello,
Thanks for your interest in Typekit! This help page shows how to select fonts from Typekit for desktop use and sync them to your computer:
http://help.typekit.com/customer/portal/articles/1145956
Once the fonts have synced to your Creative Cloud account, they will automatically be added to the font menus in all of your desktop applications, including Pages, Keynote, and Numbers.
Typekit fonts are not added to your font management software, however; you'll manage these font selections directly from the "synced fonts" page in your Typekit account.
I hope that this helps; let me know if you have any other questions! You may post them here on the forum or email us directly at [email protected] Best,
-- liz

Can aperture 2 on 10.4.11 still be used to make a photo book ?

Hello Clever People !
Can aperture 2 running on 10.4.11 still be used to make a photo book ?
If so ... is it also possible to also upload to order via a PC running on XP ?
Thank you in advance for your much appreciated help and expertise

este.el.paz wrote:
Yesterday I searched the apple discussion Unix db trying to find similar questions and found someone wanting to surf the web and do email with Unix from a few years ago and there were some recommends for "lynx" or "W3M"--the "lynx" website was unresponsive to clicking on links. This was from a couple of years ago--are there any updates or newer browsers now available that can get around the web at current speeds?
Any other options to get fairly current browsers working in ppc units? In one of the replies to my last question I got a recommend and a link to "Ten4Fox" as a re-work of Firefox and that may be my best hope, but, haven't been totally crazy about Firefox for the mac . . . Would UNIX have something thru fink or macports that would keep a browser going into the distant future? And, then how to get them to actually do something? Many thanks.
e.e.p.
No other insights from the Unix guys? Nothing out there in Unix-land to keep a current browser on a ppc computer? Traditionally on this forum there has always been someone who could offer some relevant advice, no? Not this time I suppose . . . well, if I find something I'll post back to this question. Later dudes.
e.e.p.

I selected full screen how do i undo it the tab that i used to make full screen isnt there now

i selected full screen how do i undo it the tab that i used to make full screen isnt there now

The F11 key will toggle Full Screen Mode on or off
*See --> http://kb.mozillazine.org/Netbooks#Full_screen
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

Is there a way to find out what computer was used to make an order

I found some charges on my account that I did not make assuming that it was either my 14 year old son or soon to be ex-husband, is there a way to tell what computer was used to make the order?

rbailey60 wrote:
Last update was 3/3/2011 which was the itunes update. So the problem must be w/the itunes update. Does anyone know how we can contact MAC to tell them of this problem?
It's highly doubtful there's a general problem caused by that update, or the forums would be full of similar posts. More likely, it's specific to your setup somehow.
Have you Restarted your Mac lately? If not, that's always worth a try.
Then, make sure there isn't a problem with the file system on your internal HD. Verify it, per #6 in [Formatting, Partitioning, Verifying, and Repairing Disks|http://web.me.com/pondini/AppleTips/DU.html] (or use the link in *User Tips* at the top of the +Using Snow Leopard+ forum).
If that's ok, then as GfulDedFan says, run +*Repair Disk Permissions,+* per #5 there.
If that doesn't help, try connecting to your router via Ethernet cable instead of wireless, to rule out interference problems.
If you have the same results via Ethernet, you can make an appointment at the Genius Bar of your nearest Apple Store: http://www.apple.com/retail/geniusbar/
Or call AppleCare at: (800) APL-CARE (800-275-2273)

IOS 7 back ground makes it difficult to read the text. How can I change it in mail and messages?

HI,
iOS 7 back ground makes it difficult to read the text. I know I can't change it in mail and messages, but Apple really needs to allow some customization. This is really difficult to read for older eyes.

yeah I agree with all you guys statements, the color scheme on IOS 7 *****,
I am having to constantly turn on off on off on off "invert color" mode just to switch between
the home screen, typing, and reading text messages, its an absolute pain!!
I never had any of this trouble in IOS 6.
What they SHOULD do, is make 2 different color schemes
one LIGHT color scheme,
and one DARK color scheme, for those using "invert colors" frequently.
See, what Apple doesn't seem to understand is, when you turn on "invert colors",
the lock screen turns bright WHITE, so you have to turn invert colors OFF just to read the lock screen,
then back ON when you want to type an email, read a text message, etc etc, then turn it off again when
you want to play a game.
and see, after awhile, when you switch invert colors on off on off after so many times, it drains on the devices resources, & you have to reboot the device to get accessibility options working again. I have to reboot the device several times a day now just because of that, when its just a simple fix of adding a darker color scheme as a 2nd or alternative option.
I mean, even as a normal sighted person, turning on invert colors is annoying when your at the lock screen or playing a game, think about those of us who depend upon it just to read text on the screen.. VoiceOver has the smilar issues when you have to turn it off on off on all the time it drains the system resources of the phone also,
so I agree completely...
but ya know, they don't listen to us... cuz its an option they don't use, so they don't understand... If they used that option for even 5 seconds, they'd understand what we're talking about.... What Apple should do is hire one of us as a beta tester to help them test out these types of issues, from one of us like myself who knows a thinkg or two about accessibility options of the phone.
I've been an Apple idevice fan for years, but, IOS 7 was a major disappointment in the accessibility arena..
kind regards,
Tom

Use.typekit makes forum difficult to reach

Similar Messages

Maybe you are looking for