Use-up ECO and APS

Hi,
please , I need to input to ERP instance ECO with Use-up information . Run data collection to APS and run a plan in APS instance which will calculate use-up date and send this use-up date to planner .
Can anyone help me , how to do it .
Thank you in advance
Regards
Zdenek

Hi -
Yes, both Safari and Firefox bloat in size. This phenomena is a function of how the browser's are designed, affected by a phenomena called World Leaks.
Other browsers such as Camino and Opera do not behave this way. Perhaps, the future release of Safari 3.0, making its debut with Leopard, and Firefox 3.0 will not be affected by this problem. In the meantime, as you discovered, the workaround is to quit/restart, or in extreme cases, log out/on or restart the computer.

Similar Messages

How do i sync apps to my iPhone 4S using itunes without losing aps already installed on the phone but with a different apple ID, and i dont have the apple ID??

how do i sync apps to my iPhone 4S using itunes without losing aps already installed on the phone but with a different apple ID, and i dont have the apple ID??

How have you managed to get apps on your phone that are tied to a different and unknown AppleID?
If these apps were not purchased by you, having them is effectively software piracy and you should purchase them using your own AppleID if you want to keep hem.

I am using iphone 3gs and have accidentally clicked "update" to software version 5. However, after I failed and all my data was lost. I manage to restore back to my previous situation. But all my apps has been gone. How can I get back all my aps?

I am using iphone 3gs and have accidentally clicked "update" to software version 5. However, after I failed and all my data was lost. I manage to restore back to my previous situation. But all my apps has been gone. How can I get back all my aps? I know I can get it by itunes but there are a few problems as below:
1. I have jailed break my iphone and I never purchased any apps from itunes
2. I have some important infomation saved in one of the apps called "awesome notes". How can I get it back? Is it store inside my computer? if so, how can i restore?
3. I am using window 7
I sincerely hope you guys can help me.
Regards,
Stephen Hong

alrite. I have made my mistake. I should not jail break my iphone. So if I purchase my apps again from itunes is that mean mean my data will be back?
I hope you guys can giv me some support here since I am Apple genuine buyer. I could be wrong last time and now I turn over a new leaf and learn a lesson.
Please noted that I can always create new account to ask for the same questions without mention about "jailbreak" if I want to but obviously I won't do that. Please provide me your support! Thank you!

Error when ECO and BOM creation using IDoc

Hi experts,
now i am doing an interface about ECO/BOM creation and changing using IDoc.The idoc type is ECMMAS02 ans BOMMAT04.
since i know a little about ECO/BOM, can anyone provide some good materials for me?
and i don't know which fields are mandatory in idoc segment, so i go to tansaction BD30 to run a BOM changing. i input a change number but the idoc log shows that change number does not exist. what is the change number using? where i can implement the changes, e.g, change the quantity? should the change number be used when creation and changing? how can i get this change number?
thanks a lot in advance!

Hi experts,
now i am doing an interface about ECO/BOM creation and changing using IDoc.The idoc type is ECMMAS02 ans BOMMAT04.
since i know a little about ECO/BOM, can anyone provide some good materials for me?
and i don't know which fields are mandatory in idoc segment, so i go to tansaction BD30 to run a BOM changing. i input a change number but the idoc log shows that change number does not exist. what is the change number using? where i can implement the changes, e.g, change the quantity? should the change number be used when creation and changing? how can i get this change number?
thanks a lot in advance!

Satellite U500-1F5: eco and FN buttons don't work after BIOS update

Hi everyone,
I hope i can find a solution for my problems in here.
I bought a new Toshiba Satellite U500 (PSU9ME),
I am updating my laptop regularly whenever i receive alert through TEMPRO or Toshiba service center.
Last week I received an alert to updat the BIOS and i did it. since then i noticed the following problems:
1. eco utility is not working, and when i tried to uninstall it it says (BIOS unsupported)
2. the on screen funtion buttons that appear on the top of the screen when you press the Fn button does not apear anymore
3. the touchpad lock and unlock button does not work and even pressing Fn+F9 doesnot lock it
I hope u can give me an answer regarding my problems,
I already downloaded the latest updates for the eco and value added packege from toshiba site and installed them,
BUT
didnt solve any of my prob
still eco utility is not working. The msg (unsupported BIOS), appear when i run the update.
The function buttons bar on the top of the screen not working ( even after i uninstall the toshiba value package and re-install the latest one) and the touch back lock/unlock button also is not working.
I hope Toshiba can find me a solution, coz I dont have the time to go the service center
Model U500-1F5 PSU9ME00D00XAR
Windows 7 (64)
Thanx in advance

Hello
At first just one comment:
*I am updating my laptop regularly whenever i receive alert through TEMPRO or Toshiba service center.*
Thats nice but definitely not necessary. When the system runs well, don't touch or change anything. Maybe sounds stupid now but I recommend you to remove TEMPRO from the system. Believe me you don't need it. I have 2 years old Satellite A300 and still original BIOS. It runs perfectly and I don't want to make risk and change anything. Since last month I have Satellite U500-1EX and will do the same. Tempro is already removed and I am happy with factory settings.
All you have done is OK but at least you can try to reinstall whole OS now using HDD recovery option (F8 at start-up) to see if everything will works well again. sorry but if this will not help I think you need BIOS downgrade to old version.

Smartview Addin upgrade and APS

We are on EPM 11.1.2.600 and APS version is 11.1.2.102 as is the Smartview addin. Business is looking at the feature set in later releases of the Smartview addin, specifically Smart Query and some of the VBA extensions of later versions.
We are currently an old Essbase addin shop, with plans to go to Smartview in the near future, so I am not as 'up to speed' on Smartview. My question is if we upgrade to the latest and greatest version of Smartview do I need to upgrade the APS server also? I downloaded 11.1.2.5.x and was able to connect to Essbase and planning without issues but I want to make sure all features/functionality is available. Thanks.

May I know which is your APS server , its recommended to use Web logic for latest version . May be there can be in compatibility if its web sphere !!

When must to use WLC? And why?

I've ever used Access Points standalone (AIR-AP1242G-E-K9 || 802.11g Integrated Auto AP; RP-TNC; ETSI Cnf) and now I've to do a
new installation for a customer and this model is in End-of-Life.
I found in web the substitute is AIR-SAP1602E-E-K9, but there's a controlled model AIR-CAP1602E-E-K9. I've never used a WLC
and I'm not sure what are the benefits of using it. I think this customer is good to use a controller because is a avanced user but I've
to advise the best choice to her.
Could anyone send me a link where I can learn the difference between working with WLC or without?
And... whats is the controller for AIR-CAP1602E-E-K9?
Thanks

It makes it more easy to controll a high amount of APs in your network.
- Central management
- Easy controll of administrativ access permissions
- Easy configuration of TACACs
- Easy cofiguration of WLAN- Security
-- High efficency of time for the administrator
And maybe the same Scott told you, the WLC2504 is, as i know, delivered with an incompatible softwareversion by default.
You can see the needable WLC softwareversion on the matrix. 7.4.100.x is high enough for the 1602 AP.
But be carefull with 7.4.x.x. There is no longer support for older APs like the 1100 series APs.
Like to help, like to get helped!
Don't forget, vote the answers ;)

How we will use these Job_open and Job_submit job_close??

Hi Experts,
i am new in Developement, i need one help here my problem is
I have one issue which is a report here i am getting the data into internal table, that data fetching i want to schedule it in background job..
can any body tell me how can i use the JOB_OPEN and JOB_SUBMIT function modules....
plz provide any example..
Thanks in Advance,
Venkat N

Hi,
Here is the sample program
*Submit report as job(i.e. in background)
data: jobname like tbtcjob-jobname value
                             ' TRANSFER TRANSLATION'.
data: jobcount like tbtcjob-jobcount,
      host like msxxlist-host.
data: begin of starttime.
        include structure tbtcstrt.
data: end of starttime.
data: starttimeimmediate like btch0000-char1.
Job open
call function 'JOB_OPEN'
       exporting
            delanfrep        = ' '
            jobgroup         = ' '
            jobname          = jobname
            sdlstrtdt        = sy-datum
            sdlstrttm        = sy-uzeit
       importing
            jobcount         = jobcount
       exceptions
            cant_create_job = 01
            invalid_job_data = 02
            jobname_missing = 03.
if sy-subrc ne 0.
                                       "error processing
endif.
Insert process into job
SUBMIT zreport and return
                with p_param1 = 'value'
                with p_param2 = 'value'
                user sy-uname
                via job jobname
                number jobcount.
if sy-subrc > 0.
                                       "error processing
endif.
Close job
starttime-sdlstrtdt = sy-datum + 1.
starttime-sdlstrttm = '220000'.
call function 'JOB_CLOSE'
       exporting
            event_id             = starttime-eventid
            event_param          = starttime-eventparm
            event_periodic       = starttime-periodic
            jobcount             = jobcount
            jobname              = jobname
            laststrtdt           = starttime-laststrtdt
            laststrttm           = starttime-laststrttm
            prddays              = 1
            prdhours             = 0
            prdmins              = 0
            prdmonths            = 0
            prdweeks             = 0
            sdlstrtdt            = starttime-sdlstrtdt
            sdlstrttm            = starttime-sdlstrttm
            strtimmed            = starttimeimmediate
            targetsystem         = host
       exceptions
            cant_start_immediate = 01
            invalid_startdate    = 02
            jobname_missing      = 03
            job_close_failed     = 04
            job_nosteps          = 05
            job_notex            = 06
            lock_failed          = 07
            others               = 99.
if sy-subrc eq 0.
                                       "error processing
endif.
Regards
Sudheer

I'm using matchbook pro and I'm unable to find iPhoto after upgrading to Maverick os

I'm using matchbook pro and I'm unable to find iPhoto after upgrading to Maverick os

Open the Mac App Store application and see if iPhoto is under your "Purchases" tab.
Clinton

Help using multiple iphones and ipods on itunes

Okay, is there any simple way to use multiple apple products thru itunes. I can log in on my account and sync my iphone/ipod, then I log out and log back in with my daughter's account info. I plug her itouch in and it wants to read all of my apps(some apps we both have on our devices). Have problems with music sharing as well. Still a PC user. Get very frustrated with itunes. spend way too much time trying to do things that should be simple. please help! Thank you!

Are you using method 1 with different windows user accounts?
http://support.apple.com/kb/HT1495
Sounds like you are currently using method 2 and not happy with it.

I want to buy a new apple tv but it used hdmi cables and my house is only wired for analog. Is there any way I can use the apple tv on analog cables?

I want to buy a new apple tv but it used hdmi cables and my house is only wired for analog. Is there any way I can use the apple tv on analog cables?

Welcome to the Apple Community.
It's do-able, but I don't think it's a great idea.
DVI
Some users with DVI have managed to get their TV's to work with DVI-HDMI cables. DVI carries no audio, so alternative connections need to be explored to enable audio. DVI doesn't necessarily support HDCP as well as other standards used by HDMI (which may or may not be an issue)
Analogue
There are hardware converters that will convert HDMI to various other types of output, however there are some issues with doing so that you should be aware of.
HDCP
HDCP compliant converters will not allow you to watch HDCP protected content such as that from the iTunes Store. Non compliant converters exist but we cannot discuss them under the Terms of Use for these communities.
Resolution and aspect ratio
I'm not aware of any converters that will scale the output from the Apple TV, any TV or projector which is used will need to be widescreen and support resolutions of 720p (Apple TV 2), 720p/1080p (Apple TV 3)
DAC
DAC (Example Only - Not a recommendation or suggestion that this is suitable in your circumstances)

IPad2 and a new MacBook running Lion, Both Devices use the same Apple ID which is a Hotmail eMail id. Can I create a new iCloud eMail Id and use iCloud eMail and continue to use my Hotmail Id for my Apple Id and use it for iTunes, iCloud

I have an iPad2 and a new MacBook running Mountain Lion. Both Devices use the same Apple ID which is a Hotmail eMail id. Can I create a new iCloud eMail Id and use iCloud eMail and continue to use my current Hotmail Id for my Apple Id for iTunes, iCloud.
Note, I will use both Hotmail and iCloud eMail.

Welcome to the Apple Community.
In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")

I'm using Time Machine and a LaCie external drive to backup. I also have a 8 GB LaCie flash drive I want to use for small jobs. If I plug the LaCie flash drive in, is my Mac going to think it is the LaCie external drive and start trying to backup?

I'm using Time Machine and a LaCie external drive to backup. I also have a 8 GB LaCie flash drive I want to use for small jobs. If I plug the LaCie flash drive in, is my Mac going to think it is the LaCie external drive and start trying to backup?

no.

I have an older macbook pro and the hard drive is starting to go (making loud noises). i tried to back up to an external hard drive (my passport essential se) using time machine and the computer keeps shutting down. suggestions to complete backup please?

I have an older macbook pro and the hard drive is starting to go (making loud noises). i tried to back up to an external hard drive (my passport essential se) using time machine and the computer keeps shutting down. the same thing happens when just trying to save my pictures from iphoto to a flash drive. suggestions to complete backup please?

Sounds like you'll need to access that drive while it is not booted. You need to replace it anyway, so do that, then one way or another (ext enclusure, et), access it and copy files.
If you keep trying to boot it, you might kill it for good and not get your files, so just swap it out first.

Using Adobe Bridge and iPhoto together

I use Adobe Bridge (and Photoshop) to work on my photos. iPhoto is not an option since I shoot in Camera RAW. I also own an Apple TV and want to store all of my photos in iPhoto so they are available to the rest of my family via Apple TV. Has anyone figured out a way to do image manipulation first in Bridge & Photoshop and then have them sent (or later updated) in iPhoto in an automated fashion?
Conceptually, every time I add or change a photo in Bridge or Photoshop, I'd like to convert it to JPG, and add or modify the image in iPhoto.

Also make sure PS's File handing preferences "Macimize PSD and PSB File Compatibility" is set to Always and that there are no alpha channels in the file. An alpha channel will cause the black image that you're referring to.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Use-up ECO and APS

Similar Messages

Maybe you are looking for