Use User-certificates to authenticate a user?

Hi,
I have hit a big road block and so decided to reach for some help and information.
I figured out later that blazeds forum can be the best place to get some channelset authentication questions answered
I am using blazeds & Spring security on the server. As of now my application using channelset.login(username,password) to authenticate the user.
A new requirement has been introduced to authenticate the user using user-certificates derived from a smart card.
I can use spring-security filters to pass the certificate to the server and the validate it. But I have open questions about channelset authentication.
1. Is it required to call the channelset.login method inorder to use AMF Channels & StreamingAMFChannels?
2. Can I pass user-certificate instead of password in a login call and still authenticate the channelset?
3. I have to use the channelsets , so is there way to bypass username , Password based authentication?
Thanks,

Similar Messages

Yosemite Server: Apache shm errors with proxy_balancer | SASL errors using user alias

Dear OSX Server Ninjas,
I recently upgraded my 10.9.5 Mac mini running Server 3.2.2 to Yosemite + Server v4, directly to v4.0.3. The box serves the whole Mail/Cal/Contacts/VPN palette as well as some websites, Git repos and some custom software. See below for network setup.
After battling the most blatant issues (some easy to fix but hard to find, others hard on both), I'm almost back to a working server setup … but some things keep bugging me even after days of log-reading and OD tricks. In the last days, I have read countless discussions here as well as on stackoverflow/serverfault/apple.stackexchange and blogs, so I'll try to be as thorough and precise as possible to show what I have tried so far – sorry in advance for the long post
… and since you might not read to the bottom: Thanks in advance for any help, especially with the Apache problem!
My setup
OSX Server v4.0.3 running on Yosemite 10.10.1 ➞ both latest official releases
host + DNS
Hostname configured for public domain mydomain.net, web traffic on selected ports comes in through router NAT
Server has a static IP on the local subnet 192.168.178.0/24
Server running local DNS and performing lookups for all clients in the local subnet, forwarding to the router at 192.168.178.1
Primary zone for mydomain.net with records (A, NS, MX) pointing to said static IP
changeip -checkhostname is successful
Public IP is currently configured at the domain registrar through his name servers
SSL
Trusted third-party certificate installed for host.mydomain.net (Common Name + SAN for two subdomains)
Used to secure all services
Qualys SSL Test Grade B (capped due to OSX's openssl 0.9.x not being capable of TLS1.2 and Intermediate CA SHA-1 )
TLS working both inbound and outbound according to CheckTLS.com
OpenDirectory
Recreated after upgrade (probably not necessary, since issue persists), re-imported groups + users from WGM backup files
Only the server itself is bound to the directory, other devices just access services through network accounts (CRAM-MD5, MD5-Digest)
Problems
Apache shm errors: Apache fails to create slot memory when proxy module is enabled
As soon as I start a service which requires the Apache proxy_balancer module (e.g. Cal/Contacts, ProfileManager), this starts filling up my Apache's error log:
[Mon Jan 12 01:41:17.979882 2015] [proxy_balancer:emerg] [pid 2949] (28)No space left on device: AH01179: balancer slotmem_create failed for p26d9e669--1011640492
[Mon Jan 12 01:41:17.979894 2015] [:emerg] [pid 2949] AH00020: Configuration Failed, exiting
[Mon Jan 12 01:41:28.297127 2015] [slotmem_shm:error] [pid 3026] (28)No space left on device: AH02611: create: apr_shm_create(/private/var/run/slotmem-shm-p26d9e669--1001322955.shm) failed
[Mon Jan 12 01:41:28.297347 2015] [proxy_balancer:emerg] [pid 3026] (28)No space left on device: AH01179: balancer slotmem_create failed for p26d9e669--1001322955
[Mon Jan 12 01:41:28.297355 2015] [:emerg] [pid 3026] AH00020: Configuration Failed, exiting
When I increase the Apache LogLevel to trace1, I get this as well:
[Mon Jan 12 02:11:43.190303 2015] [slotmem_shm:debug] [pid 5501] mod_slotmem_shm.c(367): AH02602: create didn't find /private/var/run/slotmem-shm-p26d9e669-813569972.shm in global list
This causes the Apache to crash constantly, which is … unnerving. After googling around for a while, I tried the following steps:
Stop Services that use the Apache (Web, *DAV, ProfileManager)
sudo apachectl stop
Remove all orphan cache/slot files (.shm, ssl-cache, proxy.*) from /private/var/run
Reboot the server
Start up the Services again
Curiously enough, this worked for a while! But I was getting several log messages about dropped proxy connections, and sometimes the ProfileManager page would time out. Then, the issue started to reappear and does not seem to be fixed again with the steps above. I looked through the Apache config files and config plists for the Services in question, as well as the default config files. The only thing I have so far is that as long as there are no active proxy connections, the Apache runs smoothly – but all goes awry when slotmem files are created (a lot of them). Sometimes, I am able to turn on the Calendar service, but switching on Contacts produces the error … one time, I even got Calendar + Contacts running, and all went well until I enabled Profile Manager.
I found several error reports with similar or identical errors from other Apache 2.4.x users, but most of those were developer talk on mailing lists, or suggested steps that did not work for me (or were inapplicable on the OS X Server Apache environment).
SASL errors using user alias for WebDAV-Digest authentication
Short version: I am unable to authenticate through WebDAV-Digest with a user's alias (defined in Server Admin > Users > Context Menu > Advanced Options or WGM). Using the main short name of the same user works flawlessly. Password Server Error log just shows:
AUTH2: {234023578237md5hash2384234, mainshortname} WEBDAV-DIGEST authentication failed, SASL error -13 (password incorrect).
The password is 100% correct: When I set up a test CalDAV account and put in alias+PW, it did not work (OS X Dialog showed “could not be verified”, Server log as above). Leaving the password field filled and just switching the user to the main short name went through instantaneously, with the Server log showing
AUTH2: {234023578237md5hash2384234, mainshortname} WEBDAV-DIGEST authentication succeeded.
Notice the same MD5 hash and canonical short name, yet different results. I don't know if this is a new “feature”, a result of mail aliases being handled differently (at least I read that somewhere) …
Additional Questions
Should I configure the DNS for public use, instead of the Split-Brain configuration (local network gets local IP, outside traffic is directed by registrar NS)? I read several articles explaining that Split-Brain is common in large organizations, but might introduce weird networking issues. Entering the external IP as a Round Robin alternative for the internal does not seem sensible to me.
I also have a question concerning LDAP log entries like this one below, but I'll put that in this already open discussion:
=> bdb_idl_delete_key: c_get failed: DB_LOCK_DEADLOCK: Locker killed to resolve a deadlock (-30994)

Today the same error occurred on a customers server.
We don't use Calendar or Contacts.
We only have some websites configured and want use NetInstall for deployments.
As soon as I disable the Profilemanager the httpd starts over and other websites and NetInstall via HTTP are working fine.
When I reenable Profilemanager the httpd processes are gone and I see the same stuff in Apache's error log...

Can I use user names and password of Microsoft Office Outlook for hyperion

I'm new to Hyperion. Can anyone tell that can I use "user names" and "passwords" of Microsoft Office Outlook for login into hyperion applications.
I'm not talking about single sign on, but want to use same user names and passwords as that in Outlook.
ANy suggestions?

That depends on how your Outlook authentication is configured.
Hyperion is generally configured to authenticate against a network directory (NTLM, MSAD or LDAP). I'm not an Outlook expert, but my Outlook user ID and password is almost always my MSAD id and password (I change clients regularly, and it's almost always the same situation). So it's also usually the same as my Hyperion ID and password.
Ask your Outlook administrator whether it uses (or syncs with) MSAD, NTLM or LDAP. If the answer is yes, then you're in good shape because Hyperion can use these as well.
Hope this helps,
- Jake

How to use user variable in Member Formula

Hi All
I have to write a member formula for %linearity quarter for a weekly application.This member will be used in reports and we do not want to do this calculation in reports, hence need to write member formula. The formula is
Week1 of Q1 forecast / Q1 Total Forecast , Week2 of Q1 Forecast/ Q1 Forecast.............,Week15 of Q2 forecast/ Q2Total Forecast.......and so on.
According to me it should work in the below mentioned manner , but need help in improvising the formula.
If(@ismbr("Weeks1") or @ismbr("Weeks2") or @ismbr("Weeks3") or @ismbr("Weeks4") or @ismbr("Weeks5") or @ismbr("Weeks6") or @ismbr("Weeks7") or @ismbr("Weeks8") or @ismbr("Weeks9") or @ismbr("Weeks10") or @ismbr("Weeks11") or @ismbr("Weeks12") or @ismbr("Weeks13") or @ismbr("Weeks14") )
"Current_Forecast"/"Q1"->"Current_Forecast";......
If anybody can help in suggesting how can i use user variable in this formula to achieve the required result.
Thanks

Hi
Thanks for the suggestion and it would be a better idea to use ISIDESC as compared to ISMBR.
I also wanted to ask if in the below mentioned formula if the result of first line is true than will the second line pick the current_forecast value of the respective member of Q1 and divide it by the current_forecast value of Q1.
IF(@ISIDESC("Q1"))
"Current_Forecast"/"Q1"->"Current_Forecast";
Also i need to know how can i write a member formula for week YOY% using user variables.The general formula is
Week 1 of FY13 - Week 1 of FY12/Weeks 1 of FY12
Week 2 of FY13 - Week 2 of FY12/Weeks 2 of FY13 and so on till week 53.
Thanks

Using user defined variables in SAP BPC 7.0 NW

Hi,
I am using BPC 7.0 SP2 NW version. I want to do some calculatioins and/or comparision in the script logic by using user defined variables.
For Ex: I want to assign the property TIMEID of TIME dimension to a variable and then use this variable in my IIF statement.
I have tried a lot but not getting any solution.
Can anyone guide me in how to use user defined variables in Script Logic.
Your valuable reply is appreciated.
Thanks & Regards
Manoj Damle

Hi,
Thanks for the valuable reply.
But i want to define variables in the Script Logic and not in the Data Manager.
The scenario is like this:
I want to check the value of the DUMMYACC1 member of GL_ACCOUNT dimension with a constant and depending on the condition i want to update a user defined variable. This variable will further be used in the *SELECTCASE statement for decision making.
The Code is as follows:
*XDIM_MEMBERSET COMP_CODE = COMP_CODE_1
*XDIM_MEMBERSET BUS_AREA = BUS_AREA_1
*XDIM_MEMBERSET VERSION = VERSION_1
*XDIM_MEMBERSET CURRENCY = AUD
*XDIM_MEMBERSET DATASRC = DATASOURCE_1
*XDIM_MEMBERSET GL_ACCOUNT = SALESREVENUE,PRICE,QUANTITY,DUMMYACC1
*XDIM_MEMBERSET TIME=2009.MAY,2009.JUN
*XDIM_MEMBERSET CUSTOMERCATEGORY = CUSTOMER_CAT_1
*XDIM_MEMBERSET PROFIT_CTR = PROFIT_CTR_1
*XDIM_MEMBERSET SEGMENT = SEGMENT1
*XDIM_MEMBERSET MEASURES = PERIODIC
*FUNCTION PRO(%VAR1%,%VAR2%)
    [%VAR1%].CURRENTMEMBER.PROPERTIES("%VAR2%")
*ENDFUNCTION
*FOR %GL_ACC% = DUMMYACC1
    *FOR %CV_TIM% = 2009.MAY,2009.JUN
        #CUR_MTH = IIF(([GL_ACCOUNT].[%GL_ACC%],[TIME][%CV_TIM%]) = 1.,1,NULL)
    *NEXT
*NEXT
*SELECTCASE #CUR_MTH
*CASE 1
    #CURRENTMTH = PRO(TIME,TIMEID)
*ENDSELECT
The errors which system gives is:
1. Duplicate formula found
2. Invalid MDX statement
3. #CUR_MTH & #CURRENTMTH is not a valid member
Please give your valuable suggestion.
Thanks and Regards
Manoj Damle

How to use user-defined packages in JAX-RPC web service

I am trying to use Object of my class located in my package in jax-rpc webservice,the code is
package supercomputer;
import Hello.*;
public class SuperImpl implements SuperIF
public String sendParam(String data)
Temp ob=new Temp();
int i=ob.get1(10000);
return data+"returned by supercomputer";
Temp is located in Hello package,I have jar the Hello package as Hello.jar and has set its classpath in targets.xml of Ant tool.
The code compiles well and service is deployed successfully,but when i try to call the service from the client its gives me following error.
[echo] Running the supercomputer.SuperClient program....
[java] java.rmi.ServerException: Missing port information
[java] at com.sun.xml.rpc.client.StreamingSender._raiseFault(StreamingSender.java:357)
[java] at com.sun.xml.rpc.client.StreamingSender._send(StreamingSender.java:228)
[java] at supercomputer.SuperIF_Stub.sendParam(SuperIF_Stub.java:60)
[java] at supercomputer.SuperClient.main(Unknown Source)
I dont know if it deploys why it gives error on client side.
Please tell how to use user-defined packages and class in jax-rpc service code ,i am not talking about passing user-defined parameters i am just talking about making objects of user defined classes in jax-rpc service.I think there is some problem in classpath.
Please guide me in doing that.
Thanks,
Farrukh

Farrukh,
I don't know if your error is about a missing class from your custom package, ... what track did you followed to say that?
To use your package in the implementation of you web service, you should only follow the rules of making a web application: put your package jar in your \lib directory inside WEB-INF/ or your package classes unjared in classes (also in WEB-INF/).
As I already said, I have doubts that your error should be originated from a missing class from your package, but:
-try to see the logs (errors?) when you deploy your web service that could give a hint about the problem.
-try to see if you can access your endpoint through your browser to see if there is a online status
-display your config/WSDL file, and the steps you did to build your web service.
regards,
Pedro Salazar.

Change gl account in MIGO by using user exit

Dear all,
Could you tell me how to use user exit to change the gl account in MIGO?
I have searched in SDN and found some code.
In user exit: MBCF0002 ( EXIT_SAPMM07M_001 ).
FIELD-SYMBOLS <F2> TYPE ANY."Field Symbol for the GL ACCOUNT
DATA : W_KONTO_NAME(50) VALUE '(SAPMM07M)DM07M-KONTO'.
ASSIGN (W_KONTO_NAME) TO <F2>.
MOVE "GLACCOUNT" TO <F2>.
"GLACCOUNT" is the new GL account you want to change.
but thecode doesn't work, it can not change the BSEG-HKONT.
Could you help me solve this problem?
Many thanks
Message was edited by:
        Chen Zhonghua

USER EXIT
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
http://www.sap-img.com/ab038.htm
http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci982756,00.html
Transaction Code - MIGO                     Goods Movement
Exit Name           Description
MBCF0002            Customer function exit: Segment text in material doc. item
MBCF0005            Material document item for goods receipt/issue slip
MBCF0006            Customer function for WBS element
MBCF0007            Customer function exit: Updating a reservation
MBCF0009            Filling the storage location field
MBCF0010            Customer exit: Create reservation BAPI_RESERVATION_CREATE1
MBCF0011            Read from RESB and RKPF for print list in MB26
MB_CF001            Customer Function Exit in the Case of Updating a Mat. Doc.
No of Exits:          8
Rewards if useful.........
Minal

Prevention of delivery when using "user status profile" for a sales order?

Hi,
I have used "user profile status" in the sales order "as a work flow" for releasing the sales order.
The user profile are as follows
a) 10: created
b) 20: Released
But I believe I am still able to create the delivery when the order status is still "10" created.
Any advise, user exit or workaround or should this happen.
Usefull answers will be rewarded.
Thanks

Dear Rajiv,
Please go through this SAP help link it will help you about Status Management in the sales order processing.
http://help.sap.com/saphelp_47x200/helpdata/en/dd/560629545a11d1a7020000e829fd11/frameset.htm
I hope htis will help you,
Regards,
Murali.

Multi mapping question using user defined function

Hi,
I have a message with multiple occuring nodes (i.e. one message with multiple orders (header + detail)) that I need to map to a idoc. I need to filter out of the source based on order type (in header) from creating an idoc.. How do I do it using user defined function + message mappping ?
mad

All - Thanks much.. Here is my requirement that is no solved by regular mapping
<Root>
<Recordset>
<Ordheader>
    <ord>
    <ord_type>
</Ordheader>
   <Ord_line>
     <ord>
     <Linnum>
   </Ord_line>
</Recordset>
<Recordset>
<Ordheader>
    <ord>
    <ord_type>
</Ordheader>
   <Ord_line>
     <ord>
     <Linnum>
   </Ord_line>
</Recordset>
<Root>
As you see above, each recordset has order transaction. One Root message can contain multiple of these. So, when I map to the IDOC, I want to filter out any ord_type <> XX.
If I use regular graphical map, it only looks at first recordset and accepts all or rejects all.
I need to use UDF. In the UDF, what comes in as input ? Resultset is output -correct ? Now how do I usse graphical mapping with UDF to generate the correct target info

Using User Defined Function is SQL

Hi
I did the following test to see how expensive it is to use user defined functions in SQL queries, and found that it is really expensive.
Calling SQRT in SQL costs less than calling a dummy function that just returns
the parameter value; this has to do with context switchings, but how can we have
a decent performance compared to Oracle provided functions?
Any comments are welcome, specially regarding the performance of UDF in sql
and for solutions.
create or replace function f(i in number) return number is
begin
return i;
end;
declare
l_start   number;
l_elapsed number;
n number;
begin
select to_char(sysdate, 'sssssss')
    into l_start
    from dual;
for i in 1 .. 20 loop
    select max(rownum)
      into n
      from t_tdz12_a0090;
end loop;
select to_char(sysdate, 'sssssss') - l_start
    into l_elapsed
    from dual;
dbms_output.put_line('first: '||l_elapsed);
select to_char(sysdate, 'sssssss')
    into l_start
    from dual;
for i in 1 .. 20 loop
    select max(sqrt(rownum))
      into n
      from t_tdz12_a0090;
end loop;
select to_char(sysdate, 'sssssss') - l_start
    into l_elapsed
    from dual;
dbms_output.put_line('second: '||l_elapsed);
select to_char(sysdate, 'sssssss')
    into l_start
    from dual;
for i in 1 .. 20 loop
    select max(f(rownum))
      into n
      from t_tdz12_a0090;
end loop;
select to_char(sysdate, 'sssssss') - l_start
    into l_elapsed
    from dual;
dbms_output.put_line('third: '||l_elapsed);
end;
Results:
   first: 303
   second: 1051
   third: 1515
Kind regards
Taoufik

I find that inline SQL is bad for performance but
good to simplify SQL. I keep thinking that it should
be possible somehow to use a function to improve
performance but have never seen that happen.inline SQL is only bad for performance if the database design (table structure, indexes etc.) is poor or the way the SQL is written is poor.
Context switching between SQL and PL/SQL for a User defined function is definitely a way to slow down performance.
Obviously built-in Oracle functions are going to be quicker than User-defined functions because they are written into the SQL and PL/SQL engines and are optimized for the internals of those engines.
There are a few things you can do to improve function
performance, shaving microseconds off execution time.
Consider using the NOCOPY hints for your parameters
to use pointers instead of copying values. NOCOPY
is a hint rather than a directive so it may or may
not work. Optimize any SQL in the called function.
Don't do anything in loops that does not have to be
done inside a loop.Well, yes, but it's even better to keep all processing in SQL where possible and only resort to PL/SQL when absolutely necessary.
The on-line documentation has suggested that using a
DETERMINISTIC function can improve performance but I
have not been able to demonstrate this and there are
notes in Metalink suggesting that this does not
happen. My experience is that DETERMINISTIC
functions always get executed. There's supposed to
be a feature in 11g that acually caches function
return values.Deterministic functions will work well if used in conjunction with a function based index. That can improve access times when querying data on the function results.
You can use DBMS_PROFILER to get run-time statistics
for each line of your function as it is executed to
help tune it.Or code it as SQL. ;)

How can I use User-Defined Aggregate Functions in Timesten 11? such as ODCI

Hi
we are using Timesten 11 version and as per the documentation, it doesn't support User-Defined Aggregate Functions.
So we are looking for alternatives to do it. Could you please provide your expert voice on this.
Thanks a lot.
As the following:
create or replace type strcat_type as object (
cat_string varchar2(32767),
static function ODCIAggregateInitialize(cs_ctx In Out strcat_type) return number,
member function ODCIAggregateIterate(self In Out strcat_type,value in varchar2) return number,
member function ODCIAggregateMerge(self In Out strcat_type,ctx2 In Out strcat_type) return number,
member function ODCIAggregateTerminate(self In Out strcat_type,returnValue Out varchar2,flags in number) return
number
How can I use User-Defined Aggregate Functions in Timesten 11? such as ODCIAggregateInitialize ?

Dear user6258915,
You absolutely right, TimesTen doesnt support object types (http://docs.oracle.com/cd/E13085_01/doc/timesten.1121/e13076/plsqldiffs.htm) and User-Defined Aggregate Functions.
Is it crucial for your application? Could you rewrite this functionality by using standart SQL or PL/SQL?
Best regards,
Gennady

How to update old records of LIPS used user exit MV50AFZ1

To All Experts,
I have used User Exit MV50AFZ1 and in this user exit i updated the fields
USEREXIT_MOVE_FIELD_TO_LIPS.
LIPS-ETENR = VBEP-ETENR.
Its working fine for new VL0N1 t-code, but what about old recods of LIPS table ?
How to update old records ? Pl. guide me.
Yusuf

Hi Yusuf,
See SAP Note 415716 - User exits in delivery processing, it explain how these userexits work and cautions that you must have.
Regards
Eduardo

Performance restrictions using User-Defined Message Search in PI 7.1 EhP1

Hi Gurus,
We want to apply the User-Defined Message Search in our productive system.
We also want to set the extractors to run during Message Processing .
Do you have any inputs on how this might affect the system performance?
Any best practices, previous experiences or thoughts on that?
Some of my questions:
How many Filters/Extractors would be a limit to not affect too much the messaging processing performance?
Running the extractors during message processing would greatly affect the performance? When to run the extractors in a batch job instead of runtime?
Any input is greatly appreciated.
Regards,
José Omar

Hi José ,
We are also planning to use User-Defined Search feature in our PI system. Could you please let me know whether or not were you able to use this in your PI productive environment?
Additionally , if you were able to use it can you please let me know the performance?
Thanks in advance
Edited by: Ravindra Hegde on Jun 3, 2011 11:26 AM

"You can also" link in UWL work item when using user decision step in workflow

Hi,
Just want to check if anybody has tried adding links to this section in the UWL when using user decision step? I need to pass some custom links which will be calling some webdynpro applications and backend transactions. I have read somewhere that Ineed to modify the XML file but don' t know how the next steps once I have defined (i.e. how to handle those links).
Thanks in advance.
Rammel

Hi Rammel
I hope you are keeping well and many thanks for using the SAP Discussion Forums .
Based upon your scenario you mentioned that:
You want to add links to the "You Can Also" section in the UWL with user decision steps
In an effort to pass custom links (calling web dynpro) applications.
You wish to know how to modify the XML
Ok now based upon the scenario there are two key points regarding XML files and efforts to change them.
Remember that XML in terms of the UWL follow the notion of precedence. Now that means that once you make a change to an XML file you need to re-upload it to realize changes. To re-upload an XML file and realized changes you need to do so with a "High" or "Very High" priority and also ensure that the UWL Cache has been cleared of the UWL Service restarted so changes can be realized.
The second key point is to ensure that you backup all current XML files before making any changes so you can easily revert those changes if required.
Now reverting back to your query, the XML files and the "You Can Also" section. Kindly see the documentation outlined below as here you are going to make changes to the I-View configuration:
Configuring the UWL
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a3461636-0301-0010-3787-978f5ac8bd45?overridelayout=t…
UWL Content Configuration
UWL Content Configuration - Configuring the Universal Worklist - SAP Library
Kindly update me as per your findings.
Kind Regards & All The Best
Troy - Enterprise Portal Support Engineer

Link break in email body using User Notification Activity in 11g

Hi All,
I am using User Notification activity in a bpel process to send emails.Howver I am having trouble formatting the contents of the email body.
Desired output is:
Hi
How are You
Cheers,
Ritu
I used following approches but none of them seem to help.I cannt use email activity for the same.*(Please remove * while reading)*
1.<html><body>Hi<*br*>How are you<*br*>Cheers,<*br*>Ritu</body></html>
2.Hi,<*br*>How are you<*br*>Cheers,<*br*>Ritu
3.Hi*&*#13;*How are you*&*#13;*Cheers,*&*#13;*Ritu
4.I even coded the above within the string()
But none of them seems to be working.
Please help.
Edited by: 896674 on 2012-mar-28 04:45
Edited by: 896674 on 2012-mar-28 04:47

It looks like what i found is a temporary solution.Everytime i edit the activity it resets the mime type to text/plain.
could any body tell me how to provide line breaks in text/plain mime type for user notification activity in bpel.
Regards...

Use User-certificates to authenticate a user?

Similar Messages

Maybe you are looking for