Use WRT350N and USB hard drive for backup

I intend to use a Western Digtal MY BOOK Essential Edition (500 GB USB external hard drive) with my WRT350N router for backing up my data every night. Has anyone used this combination? Can you tell me if there are any obstacles I should be aware of? The backup software I will use is Genie Backup Manager. I think I am going to need help in configuring the router to use the external hard drive.
Thanks,
poorolepaul

There were rumors floating around that the USB port in the 350N can not handle anything over 250Gb. Since the drive I used with the 350N was not that large I have no personal knowledge of whether that is true or not.
In any event, using the current firmware for the 350n (1.3.02) you can be assured that the USB will totally lock up about every day or two and the router and hard drive will have to be reset. Using the beta firmware that you can either request from Linksys or find available from someone on the Internet, that problem APPEARS to be fixed. The only problem is that a gigabit network connection will now lock up every day or two. That was my personal experience and what I have read by others.
My recommendation would be not to buy the 350N until they release firmware that fixes these problems otherwise you'll be as frustrated with the product as I am and others are.

Similar Messages

Trying to use new 500GB external hard drive for backup for first time

I'm doing our normal Clonezilla Backup procedure and ran out of disk space for the first time. The normal person who does this is on vacation. I put the new hard drive in for the backup, but when I ran Clonezilla it didn't recognize it.
I looked in Server Manger and it shows it as Unknown with a red arrow and not initialized. It's shown as unallocated. What do I need to do at this point? Do you have instructions or a link to instructions? I'm new to working with servers,
etc. I probably need to format the new external drive but I'm not sure how. This is a simple server, without VM's, etc.
Thanks!

Thank you for the updating.
If there is still anything we can help please just let us know.
If you have any feedback on our support, please send to [email protected]

Formatting External Hard Drive for Backup

Please advise: how should I set up an external hard drive (WD 500GB MyBook Home Edition) with a view to using it to backup my MacBook with Time Machine and have partitions to be accessed by Windows: 1) through BootCamp, running Windows Vista (Business) on the MacBook and 2) an external PC running Windows XP? I intend to set up partitions for: 1) Time Machine (GUID); 2) a 30GB MS-DOS (FAT-32) partition for Windows Vista (on the MacBook); 3) another 30GB MS-DOS (FAT-32) partition for Windows XP (to back up the old desktop); 4) another 30GB MS-DOS (FAT-32) partition to back up photos and video clips; 5) yet another 30GB MS-DOS (FAT-32) partition (The last one, at last!) to back up music and leave some spare room. That should leave me about 350GB for incremental Time Machine backups. (The hard drive on this MacBook is 150GB, 88GB of which is currently dedicated to OSX, with the other 60GB used by Windows.)
I don't use virtual machines or any other software to access operating systems - just reboot through BootCamp. Eventually, I intend to phase out Windows as all my old stuff - more than twenty years' worth of it - gets made redundant by the MacBook. I've had the MacBook for nearly a year now, so feel confident that it will replace the PC's. As you may imagine, however, making twenty-odd years' worth of stuff redundant is not an overnight process. I don't think I have any files of more than 4GB, nor do I expect to acquire any on the PC's, so can't foresee problems with FAT-32's limitations. I understand external PC's can have trouble seeing FAT-32 partitons on hard drives sharing partitions formatted in GUID.
What's the best way to go about doing this? Comments/suggestions/tips, please. Is the plan outlined above a stupid idea? Be honest, please!

Your computer has USB 1.1 ports; using an external USB hard drive for any purpose other than as a bootable Mac OS X backup will work, but you should choose a FireWire drive if possible, as transmission speeds are much faster. A drive does not need to be bootable if you're only going to back up documents, such as your photos, to it; it only needs to be bootable if you intend to use it to help troubleshoot future issues with the internal drive.
You should use the Disk Utility in the /Applications/Utilities/ folder to reformat the drive in the Mac OS Extended format prior to backing up items to it, and this is required for a bootable backup.
(21126)

CPU is very hot when using Thunderbolt display and mac attached USB hard drive for TimeMachine

Hello,
i've bought the new MacBook Pro 15" and a Thunderbolt display. Everything works fine for me due to the latest updates, but i experience an issue which i really don't understand. When i connect an usb hard drive for TimeMachine to my display it works like expected (CPU has a temperature of 64°C), but when i connect it to an usb port of the mac while using my display the CPU temperature goes crazy (spikes about 80°C) and it gets very noisy. Has anyone else experienced this behaviour?
May this has something to do with the dual graphics adapter and how the system handles the data stream to thunderbold ports and usb devices? Which graphics card is used for the external display, the internal gpu or the adapter from ati? I've googled a lot but haven't found appropriet answers about these questions.

Hi there ulairi9!
I understand how this would be a frustrating issue! I have an article here that can provide some troubleshooting steps for you, and can hopefully help you resolve the issue. That article specifically addresses the issue you are experiencing, and can be found here:
AirPort Extreme and Time Capsule: External USB drive becomes inaccessible
http://support.apple.com/kb/TS3271
Thanks for using the Apple Support Communities!
Cheers,
Braden

I bought an external hard drive for backups to use with Time Machine, but however when I try to connect it with the other windows laptop it doesn't work ? intact it doesn't work on any other device except my MAC ?

I bought an external hard drive for backups to use with Time Machine, but however when I try to connect it with the other windows laptop it doesn't work ? intact it doesn't work on any other device except my MAC ?

Do not worry about it.
Time Machine needs that your external drive is formatted in HFS+, or better known as "Mac OS Extended (Journaled)". This filesystem is used by Apple on Macs and Windows cannot read or write drives formatted with this filesystem, being this the reason why all your devices do not read the external drive except your Mac.
You can only use your external drive to make Time Machine drives. If you store anything different, you may damage the Time Machine structure, so it is better not to use it as a drive to store other data. Instead, get another external drive to do it or create a second partition on the external drive formatted in FAT32 by using Disk Utility > http://pondini.org/OSX/DU3.html FAT32 can be read by Windows PCs

I have just upgraded from a Macbook to a Macbook Air. I have been using a iomega external hard drive for Time Machine, which use a Firewire. However, Macbook Air's do not have a Firewire port and i cannot find an adaptor anywhere. Can anyone help?? Thanks

I have just upgraded from a Macbook to a Macbook Air. I have been using a iomega external hard drive for Time Machine, which use a Firewire. However, Macbook Air's do not have a Firewire port and i cannot find an adaptor anywhere. Can anyone help?? Thanks

There has never been a reliable firewire ---> USB adapter suitable for external high speed storage. This was a major issue when the MacBooks lost the firewire port a number of years ago (Apple subsequently brought it back).
The only high speed port on the Air is the ThunderBolt port. There are external ThunderBolt drive options out there, but they're somewhat more expensive than traditional USB/FireWire options.

First time using external hard drive for backup of computer....

First time using external hard drive for backup of computer....it asks "Do do you want to erase disk?" In order to proceed, I have to say "yes" ... is that what I want to do? ...Seems like I'm skipping a step...

To use Disk Utilities, attach the drive, open Finder > Applications > Utilities > Disk Utilities and then highlight the LaCie drive in the left panel of the DU window. In the right panel, choose the Partition button top center of the pane. Then decide how many partitions you want on the drive, one is just fine.
Then choose the format, the default is Mac OS Extended (Journaled) which is prefered.
Then name the partition or drive.
Then choose the partition table, the default is GUID which is prefered.
Then Apply and you will get to confirm that you want to erase and format the drive.
Quit DU and you are ready to go.

I want to use my 1TB Seagate Hard drive for time machine and transferring files from Mac to PC.

For about a year I've been using my 1TB external hard drive for only time machine. To be honest, it wasn't until today that I tried to connect my hard drive to a PC and realize it isn't compatible. I read about partitioning the hard drive so that it can work both for time machine and transferring files between pc and mac. I'm not what you would call tech savvy, so I was wondering if I can get some advice on how to do this.
Thanks in advance.

To do it, you have to partition the hard disk, so you will have one partition for Time Machine and another one to store files and use them in a PC and Mac. To create the partition, follow these steps > http://pondini.org/OSX/DU3.html
In order to read and write in the external disk on the PC, you have to select "MS-DOS (FAT)" as "Format". If you choose any other option, the PC won't be able to read your external disk. Apart from that, note that you can't use files bigger than 4 GB with FAT. If you want to use the external disk with files bigger than 4 GB, you have to format your new partition in exFAT, and you have to do it on a PC

I am semi-retiring my old mac mini and want to use it as a hard drive for my macbook pro. Does anyone know how to do this?

I am semi-retiring my old mac mini and want to use it as a hard drive for my macbook pro. Does anyone know how to do this?

1. Remove the drives, install them in external enclosures.
2. Use a Firewire cable to connect to your computer. Boot the mini into Target Disk Mode - Transferring files between two computers using FireWire

I bought a new external hard drive for backups, but time machine won't do a full back up. I think it is remembering backing up onto previous external hard drives, which I don't own anymore. How do I do a new full backup?

I bought a new external hard drive for backups, but time machine won't do a full back up.
I think it is remembering backing up onto previous external hard drives, which I don't own anymore. How do I do a new full backup?
When I bought the new (used) iMac, I also bought an external hard drive for backups. It worked fine, but my husband stole it.
Then I bought a new external hard drive (Seagate) and it worked fine for three weeks, then died.
So I just got a new external hard drive, which was put together from an internal hard drive and a hard drive enclosure.
Time machine did the first backup today, and it should have taken 9 hours like it did on the previous first time full back up. Instead, it took 30 minutes. That can't be right. I want to start over and do a full backup to make sure everything gets onto my new external hard drive, but I can't figure out how to do that. Please help.

Triple-click anywhere in the line below to select it:
tmutil compare -E
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
The command will take at least a few minutes to run. Eventually some lines of output will appear below what you entered.
Each line that begins with a plus sign (“+”) represents a file that has been added to the source volume since the last snapshot was taken. These files have not been backed up yet.
Each line that begins with an exclamation point (“!”) represents a file that has changed on the source volume. These files have been backed up, but not in their present state.
Each line that begins with a minus sign (“-“) represents a file that has been removed from the source volume.
At the end of the output, you’ll get some lines like the following:
Added:
Removed:
Changed:
These lines show the total amount of data added, removed, or changed on the source(s) since the last snapshot.

Trying to copy iPhoto Library to external hard drive for backup. Error message: The Finder can't complete the operation because some data in "iPhoto Library" can't be read or written (Error code -36).

Trying to copy iPhoto Library to external hard drive for backup. Error message: The Finder can't complete the operation because some data in "iPhoto Library" can't be read or written (Error code -36).

That code is
-36
ioErr
I/O error (bummers)
Make sure the EHD is formatted OS X Extended (journaled) and run Disk Utilty on the EHD and repair the disk. If that fails to help I'd try the following:
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button,
navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option
In the next window name the new library and select the external HD as the location of the newly rebild library.
Click on the Create button.
Note 1: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost.
Note 2: Your current library will be left untouched for further attempts at a fix if so desired.
OT

What external hard drives for backup are compatible with Yosemite?

I have an early 2013 MBP Retina 15" and have installed Yosemite. I want to purchase an external hard drive for backup via Time Machine. I have read that Western Digital drives were associated with data loss with Mavericks; I do not know if that has been corrected. Has anyone backuped successfully on an external hard drive with Yosemite installed, and if so, can you let me and others know the brand and model. Many thanks.

Understood.
I don't receive any compensation for promoting any product from any computer, hard drive or computer peripheral manufacturer. I don't receive any compensation from any of those manufacturers or sellers for any reason. In fact I was not promoting any product, I was responding to the poster's query and was stating that I have observed the drives in use and working with the Mac OS.
My workplace is a consumer of these items and we buy and use thousands of PCs, Macs, WD and non-WD drives, and so forth. I was providing information about whether WD drives work with Macs running various operating systems. I don't promote any particular brand, we use many different ones here.

Transferring hard drive files to external hard drive for backup have old tiger osx 10.4

how do I copy and transfer hard drive to external hard drive for backup of everything?

You can clone the entire drive to the external, provided you have more space available on the external drive than the total of your used filespace on the main drive.
Carbon Copy Cloner will perform the clone for you.
Matt

I am using a WD external hard drive for backing up my laptop with Time Machine, but I have to do it manually. How do I know when it has finished the back up? How long should it take?

I am using an external WD hard drive for backing up my laptop. I have to do it manually, so I can't set Time Machine to just do it for me. How do I know when it is done backing up? How long should this take?

Triple-click anywhere in the line below to select it:
tmutil compare -E
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
The command will take at least a few minutes to run. Eventually some lines of output will appear below what you entered.
Each line that begins with a plus sign (“+”) represents a file that has been added to the source volume since the last snapshot was taken. These files have not been backed up yet.
Each line that begins with an exclamation point (“!”) represents a file that has changed on the source volume. These files have been backed up, but not in their present state.
Each line that begins with a minus sign (“-“) represents a file that has been removed from the source volume.
At the end of the output, you’ll get some lines like the following:
Added:
Removed:
Changed:
These lines show the total amount of data added, removed, or changed on the source(s) since the last snapshot.

How to scan my computer and external hard drives for pictures with out importing duplicates.

how do i scan my computer and external hard drives for pictures with out importing duplicates.

iPhoto doesn't scan anywhere. It imports files offered to it. If it spots a duplicate it will warn you.

Use WRT350N and USB hard drive for backup

Similar Messages

Maybe you are looking for