Useage stats dont reset to zero after full charge?

hi all, i thought that, after a full charge, the useage stats, ie, time in use and standby, went to zero. i am getting the full charge indicator but the stats continue to run up and not get reset to zero. am i missing something? uj thanks.

Are you getting the little plug icon (vs the lightening bolt) in the battery? That is when the iPhone recognizes a full charge, despite how "full" the battery actually appears. If you have been chraging via your wall unit, try to "top off" using the USB. I did that this morning, and as soon as my iPhone had completed a sync, I got the battery symbol and my usage stats reset. Some people have also reported doing it vice versa, and topping off via the wall unit if they have been charging via the USB. Good luck.

Similar Messages

Volume reset to zero after restart

i have a problem with my system, i dont have any answer, why my front channel volume always reset to zero after i reboot my system??
could anyone help me??
thx before...
sorry for my english...

thanks a lot,i was having the same problem as well
OP: please mark this thread as SOLVED

I have an ipod nano 5th generation. the problem with it's that it doesn't show in itunes when connected to the laptop and it switches on on its own and songs start playing the battery gets consumed too fast after full charge. what is the actual problem?

i have an ipod nano 5th generation. the problem with it's that it doesn't show in itunes when connected to the laptop and it switches on on its own and songs start playing the battery gets consumed too fast after full charge. what is the actual problem?

What have you tried so far in terms of troubleshooting this issue? Are you plugging the iPod into a high powered USB 2.0 port on the back of your PC? Have you tried a different USB cable?
What happens if you try to reset the device with it still connected to the PC?
How to reset iPod
Has this iPod ever worked on this PC or is this the first time you have time you have tried connecting it?
Have you carefully worked through each and every single suggestion in this Apple support document?
iPod not recognized in 'My Computer' and in iTunes for Windows
B-rock

HT201401 My iPhone 4S with iOS 6 is draining battery in large chunks and after full charge drops to 1% within 15 mins why

I am so frustrated right now as I have to have my iPhone constantly on charge. After full charge it can drop from 100% to 1% in 15 minutes even when not it use. It often die whilst displaying 35% and will only come back on after charging which shows it in red zone empty needing charge. The red battery pic can remain for over an hour before it regains any life!
Any suggestions done all the usual
Reset
Removed email accounts
Killed off open apps
Turned off battery draining things like Siri etc
Phone is 1 year old
Help as I can't afford a new one and need this for business too

My observation are:
Pros:
4. Notificaion now use any address while position is used, not only address book.
5. Great DND mode with auto swithcing.
6. MUCH more faster Safari work.
7. Great and funny way to reload messages in mailbox.
8. Separate footer for each mailbox -GREAT!
Cons:
1. WiFi - works as it was.
2. Apple map. I think it's good that google went out. Apple will develope own service and it will be better. For the moment I found Apple map less usefull, but it knows the way between Russia and Finland when Google doesn't.
3. No overheat observed... Today I was thinking that iPhone became hot, but it was on sunsine...
4. As it was 100% at evening - 100% at morning so it is now the same. While usage also the same.
5. Yes, I'm also don't know what is this for..
6. So what? I don't care.
7. Appstore became MUCH better!

Ipod nano 6th generation discharges 4 hours after full charge-what can be done?

ipod nano 6th generation discharges 4 hours after full charge-what can be done?

i have the problem it will barely tuen on after 5 hours of charging and i think the battery is duff, ive barely used this thing and am really disappointed

After full charge i can use my macbook only for 2hrs and after 20 min my battery percentage decrease from 100% to 87% and it will happend every 20 min .. pls help me

after full charge i can use my macbook only for 2hrs and after 20 min my battery percentage decrease from 100% to 87% and it will happend every 20 min .. pls help me

Hi,
How old is your MBP? how many cycle batter do have ?
I will also recomend to use the software http://www.macupdate.com/app/mac/24141/battery-health-monitor
to monitor battery life.
You should be able to read everything from the software.
Please post results.
Regards,
Mirek

My iphone 4s battery back up is very bad. do u ppl also facing same prob or only i am having dis prob? after full charging it only works for 6 hr not more than dat. what should i do?

my iphone 4s batery back up is very bad. do u ppl also facing same prob? it works only for 5hr after full charging. should i go for check up or not?

www.apple.com/batteries/iphone.html

Useage Meters Not Working Even After Full-Charges

Even after four consecutive full overnight charges, the useage meters on my iPhone showing use and standby time "from last full-charge" show nothing at all.
Is this normal? If not, how do I fix it?
Will a "Restore" via iTunes fix the issue?

I read the problem a little different.
The poster said - "showing use and standby time from last full-charge as nothing at all."
Maybe his nothing is zero. In which case it is reading correctly.
I would avoid a restore if I were him but that is my approach.
mikeab

Element resets to zero after sub vi runs

Hi all,
I want to use the following code to slowly and continuously ramp up laser power. The sub vi called scan does the ramping but after it has ramped all the say up to the set power it resets to zero. I have been working for awhile trying to figure out how to the variable element set to the final desired power after the ramping has finished but I can't figure out a way that works. I'm curious if anyone has any suggestions!
Thanks,

Well there's your problem, at least the one causing your drop: your index input will keep going up with each iteration, but your array inside the VI is only so large. Once the index goes above the array size, it tries to index past the end and will therefore output the default value of zero. To fix this, put a Select node that is controlled by your x=y? boolean output. If True, output the "Stop" input value and ignore the indexed value.
DISCLAIMER: This should fix your immediate problem that you're asking about, but your code in general will most likely have other issues. There are better ways to ramp a signal.

Why is the does indicator cluster values reset to zero after execution?

I'm using a cluster to contain a selection of indicator. Each indicator has a propery node, the value being sent to the node is the output from a color box constant. A terminal gets associated with the indicator cluster. When I run the program the values get routed to the indicator but quickly reset to zero. If I remove an indicator from the cluster and run the program the indicator stores the value. Why is the indicator values resetting when placed in a cluster?

I've answered this question some hour ago but I see it's still unanswered, so something went wrong.
I think you are bumping against a race condition i.e. you read a value of a control or indicator and change it inside the same loop, LV does not accept it.
If your cluster is an indicator you can create its local variable, change it to read mode, unboundle, change the values of the indicators you want, boundle them back and in the next loop you can set the new value of the cluster (you should use a shift register).
You can use an alternative method that lets you change the values you want of the indicators in your cluster in the same loop. It is based on the property nodes of the cluster, see sample vi attached.For a description of the property node used open the help
window.
Hope it helped.
[email protected]
Attachments:
cluster_updates.vi ‏19 KB

5G iPod no audio after full charge

I have a new 5th gen ipod and having problems with the audio playing after charging the unit.
I leave the ipod connected to the USB cable overnight, but when I go to use it later in the day, trying to play songs or podcasts, there is no audio! This has happened about every time I've charged it. All menu navigation and selection of things to play works fine, but there is no audio to be heard. Song, podcasts, videos, no audio for any of them. The timer ticks as it plays, the status bar shows it proceeding thru the play, but no audio.
I don't know yet if it's related to charging but it seems to occur after a charge. I have to soft-reset to get it to work again. Then it works fine until the next time I charge it. This is getting really annoying. I have updated the software on the ipod to the latest available. I have the latest iTunes.
One day after soft-reseting and then playing audio ok, I went to use it a few hours later (no charge inbetween) and it wouldn't play audio again. This time I also had a terrible time trying to soft-reset it, it wouldn't! I pressed the center select and top menu positions on the thumbwheel and it wouldn't go, try after try! After about 5 minutes of trying it finally did.
I have an iSkin eVo case on my ipod. I don't know if this would affect it but I also left the single sheet sticky plastic on the face of the ipod that came from Apple. Once the audio starts working, it works fine. No problems selecting, navigating, changing volume, moving the play-head forwards, back, etc.
Anyone else have this issue? I'm about to take it in for repair/exchange.
G4 Dual-533 Mac OS X (10.4.5) ipod 5th generation (video)

Well, I spoke too soon... two days of using the ipod and it worked fine, BUT I realized I didn't leave it charging over night. Third night I had it on all night so a full charge and once again it didn't play audio in the morning. I shows that it's playing, the time for the song/podcast changes, the play symbol is on (not pause) but no audio. I have to reset the ipod and then it works fine. Then later in the day I try to play it and it won't even play! Menu navigation works but I click on the play button and it won't change the play time.
So I'm back to square one! This ipod has a problem!
Any ideas? I'm ready to take it in to the Apple store before the warrantee runs out.

My iPhone 4 is only 14 months old over dropped very well looke after, one day the lock button stops then the volume buttons, now the headphone port does not work and the battery lasts about 4 hours after full charge I still have a year left on my contract

My phone is 2 months out of warranty, it's never been dropped or miss used yet the past week every day something has gone wrong with it. First the lock button stopped then the side volume buttons. Then the head phone port when I putt headphones in the phone turns the volume
Down automatically and it won't turn up until I take my headphones back out. The battery lasts 4 hours max after a full charge and today I took my phone off the docking charger and all my music has gone! The phone is breaking down more and more everyday what is going on! I know people who have had there iPhones years an non of this happen! I still have a year left on my contract too!

Who is your carrier and what is your coverage with them? If you are with say Verizon, and have Total Equipment Coverage or Extended Coverage, they will swap it out for you under Manufacturer Warrantee.

Apple Universal Dock doesn't work after full charge

last night, I put my ipod nano into the Apple Universal Dock.
I worked just find with the apple remote.
I stopped the music using the remote, then watched TV about 2 hours.
After that, I saw my ipod was full charged, and the dock station hasn't worked any more.
Also, the remote doesn't work as well.
I can use the play button on the ipod, but no sound out anyway.
There is another archive thread with the similar problem to me, but no answer yet.
http://discussions.apple.com/thread.jspa?messageID=7734050

Anyone used to face this problem before, and got any idea/solution? help please?
or do I need to send it to the store where I bought?

My I touch goes completely dead even after full charge

My I pod touch 5 goes completely dead even with a full charge and go back to life after I plug the charger

If setting it up as new device does not help, get it serviced:
How to back up your data and set up as a new device
Apple - Support - Service Answer Center

After full charge battery only shows 4 hours.

Have the brand new 13 inch, and the battery is only showing 4 hours left after a full charge.
Thoughts?

How many programs do you have running in the background?
What is the backlight level set to?
Is bluetooth turned on?
Is the keyboard backlight turned on?
Is Airport turned on?
Battery life is directly related to the load that you put on the cpu.

Useage stats dont reset to zero after full charge?

Similar Messages

Maybe you are looking for