Used 3g for me, original setup?

I have recently acquired a used 3G iphone, not in my hands yet. It is unlocked and has been jail broken, and also has the new OS4 system installed. My question(s) is, I do have an itouch 8g, with the OS3 already installed on the touch and computer, is there a way to re-set/wipe clean the 3G phone and then when I sync from my computer it will load the OS3? Also, if that can work, what do I do to unlock for a different country?
thanks...

Just connect to itunes and restore the ipod, when the restore is complete set it as a new ipod. Your problem must be resolved.

Similar Messages

I purchased IPod touch for grandson and he has screwed up his ICloud and cannot remember email or password used to do the original setup. Now receiving message that no more ICloud accounts are available for this unit. Is there a way to work through this?

Grandson and friend just reset system several times and now neither can remember which email account or password was used to set up the ICloud account. I try to set up the account for him again and receive the message that no more accounts are available. I cannot reset because just like them, I don't know what they used. Surely, there must be some way to wipe out their settings and start fresh again?

Just connect to itunes and restore the ipod, when the restore is complete set it as a new ipod. Your problem must be resolved.

Using AE for dual-band setup

In the Designing Airport Networks book they show using a couple of Extremes or one Extreme and one Time Capsule for setting up a dual-band network.
But would it be possible to use one AE bridged with ProxySTA and connected wired to an Extreme and do the same thing?
thanks

But would it be possible to use one AE bridged with ProxySTA and connected wired to an Extreme and do the same thing?
Not sure what you mean by that.
To create a dual-band network all you need is one 802.11n base station and one 802.11g base station. They can be from any manufacturer. The trick is to disable the DHCP server on the base station not directly connected to the internet.

I have an ipad&iPhone but used the same iCloud account for both during setup.i now have ran out of iCloud storage!

I have an ipad&iPhone but used the same iCloud account for both during setup.i now have ran out of iCloud storage! If I delete the account from iPhone will I lose the apps from my ipad?
And will new account that i set up on iPhone give me 5gb storage? I assume its not as easy it sounds, it never is!
It is the camera roll on both devices that are using the storage up, and I know I can transfer the photos to a hard copy, which I will but if I can get 5gb from two separate iCloud accounts then that's the route I will take!
Many thanks in advance for your help.
Ps I had originally synced the iPad and iPhone but as far as this apple illiterate operator is aware I managed to stop them syncing a few months at lol.thanks

Welcome to the Apple Community.
I assume that the same account is required on both devices (it would be rather awkward otherwise) and that most of your space is consumed by back up.
You will need to buy more storage or back up to iTunes instead of iCloud.
Being able to back up to the cloud can be very useful, especially if you don't have access to a computer or have infrequent access to one, however unless you specifically need to use iCloud for back up, you will find backing up to iTunes significantly more convenient and possibly more reliable.

DLU or DSfW for single server setup using NOWS for Small Bus

I'm planning to install a single server in a 5 user office, plus a few remote users.
OES 11 SP1, ZCM 11, GW
As part of this I want to have single sign on to Windows workstations (Win 7), and could use DLU, but I also wonder about DSfW.
They both would achieve single sign on but in vastly different ways.
Which way to go? DLU or DSfW?

Originally Posted by drops
5 users? in my opinion everything is overkill then.
The 5 users is expected to grow to 10 within 3-4 months.
Overkill or not, no end user likes to have two different passwords when they logon, and most don't comprehend the difference between a local logon and the network (OES) logon. If there is a password change policy in place then the problem is compounded.
So the goal is single sign on with unique profiles.
Originally Posted by drops
if its only about desktop access with a local user you have several options
1. DLU
A good candidate, though I haven't used it for some time. Satisfies all criteria.
Originally Posted by drops
2. pgina LDAP auth - local gateway and novell client passthrough auth
Never used this...Is it easy to setup and reliable?
Originally Posted by drops
3. use a generic windows user
I've used this on a small Samba setup once, and it is workable, except for no unique user profile, and not ideal from a security perspective.
Originally Posted by drops
4. DSfw or AD (synchronized passwords)
I've never used DSfW hence my post here. My gut feeling is that it is more complex and difficult to troubleshoot than DLU so I'm leaning towards DLU. That said, I'm also interested on your comments of any PGINA implementations you've done, and if it should be considered.

HT5622 I did not choose "use icloud" option for my initial setup. so, it is creating for not enough space in my ipad. How do I go back and set up icloud to store data?

I did not choose "use icloud" option for storing during my initial setup. How can I reset icloud account, so it can be used for storing.

Welcome to Apple Support Communities
If you are planning on using iCloud to store files, forget about iCloud and use a cloud storage service like SkyDrive or Dropbox. iCloud is focused on information sync between the iPhone, iPad, iPod touch, Mac and PC instead of storing files like MobileMe. It's not worth using iCloud for this.
If you still want to set up iCloud, open Settings > iCloud, log in with your Apple ID and follow its steps

I'm using Windows 7 64 bit. I downloaded iTunes for Windows and setup an account. How do I stream a TV show to my TV. I have a Belkin router. My TV has many site Icons, e.g. Netflix, hula etc. from which I can download and watch movies in my Den.

I'm using Windows 7 64 bit. I downloaded iTunes for Windows and setup an account. How do I stream a TV show to the TV in my bedroom? I have a Belkin router. My TV has many site Icons, e.g. Netflix, hula etc. from which I can download and watch movies in my bedroom. But the iTunes icon doesn't appear?

I'm using Windows 7 64 bit. I downloaded iTunes for Windows and setup an account. How do I stream a TV show to the TV in my bedroom? I have a Belkin router. My TV has many site Icons, e.g. Netflix, hula etc. from which I can download and watch movies in my bedroom. But the iTunes icon doesn't appear?

How to setup USE Tax for USA

Hi guys
We recently got new scenario where we need to calculate USE Tax for interstate purchasing scenario. Basically the interstate vendor is tax exempt but we need to accrue and remit to government ourselves.
Just looking for some tips for the setup. I guess a new Tax Code is required but what about pricing procedure? (this tax is not added to PO total as we do not pay it to vendor.
We use TAXUSX procedure for USA.
Any help with experience is greatly appreciated.
AC

It is generally advised to use a external tax engine for calculation of US Use and Sales tax because tax is calculated based Ship to Ship from locations and if a product is taxable or not. Within US tax is caluclated for multiple levels like state, city, town and county. Only external tax systems can handle such complex split. If you have a very small business then you can also configure TAXUSJ tax procedure which is jurisdiction based. you need to assign the %age for every jurisdiction. I still say that use external tax engones like vertax, fabware or Sales tax office. External tax systems use TAXUSX tax procedure.

Is any SIMPLE way to legally publish an original music piece to get it into the iTunes store as public domain use just for start up purposes? Any better ideas ? I write contemporary (mostly) dance pieces...any thoughts?

Is any SIMPLE way to legally publish an original music piece to get it into the iTunes store as public domain use just for start up purposes? Any better ideas ? I write contemporary (mostly) dance pieces...any thoughts?

https://itunesconnect.apple.com/WebObjects/iTunesConnect.woa/wa/apply

HT1515 do i need to buy an apple time capsule to bridge my airport express or is it okay for me to just use my wi-fi router setup at home?

do i need to buy an apple time capsule to bridge my airport express or is it okay for me to just use my wi-fi router setup at home?

Sorry, I am confused by your question.
What devices do you now have on your network?
What are you trying to accomplish?

Mail wanted to start setup - although have been using it for 2 years!

Hi, appreciate your help as no so technical myself......but started my mac this morning and clicked to start mail and it wants to run through the set up again etc - like I just bought the computer.
Have been using mail for 2 years no problem........and my mail box contains so much stuff!
Really appreciate any help to fix this problem and get me back on track!
Cheers

See:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod

Ways to reduce downtime for filling up setup table

Hi Experts,
Can anyone tell me the step by step process so that i can reduce downtime for filling up setup tables?
I know that setup tables can be filled by considering sales document numbers....but the further steps are not clear with me...........specially with data loadin till PSA and then to ODS/Cube
So plz throw some light on this.......
Regards,
Vaishnavi.

Hi,
You will need to fill the set up tables in 'no postings period'. In other words when no trasnactions are posted for that area in R/3 otherwise those records will not come to BW. Discuss this with end user and decide. Weekends are a general choice for this activity.
You can run them after business hours so that there wont be any transactions, or in the night times or you can do it on week ends so that there is no need to take down time.
Fill the setup tables with already closed values and then fill up again with open values.This will reduce the down time.
Initialize closed periods first in which users wont enter data ( for example in 2007 or 2006), this initializations can be done while users are working. Then the initialize last period at night/weekends.holidays etc.
If you know documents that are in closed periods, and you are sure that these documents can no longer be changed, you can only fill the SetUp tables for these documents or only for these periods, by continuing to post in open periods. You then initialize only for these intervals, delete the setup table, and only then do you fill the setup table with the rest of the documents this procedure can drastically reduce the downtimes of your system.
However, there is a risk that user exits (and in LIS, formulas and conditions) can be used to retrieve documents that are in periods that are already "closed periods".
One more thing what you need to bear in mind is, to check if there are any Scheduled jobs which are updating the transaction tables, which would definitely cause Data Reconciliation Issues.
Try Early Delta Initialization
With early delta initialization, you have the option of writing the data into the delta queue or into the delta tables for the application during the initialization request in the source system. This means that you are able to execute the initialization of the delta process (the init request), without having to stop the posting of data in the source system. The option of executing an early delta initialization is only available if the DataSource extractor called in the source system with this data request supports this.
Extractors that support early delta initialization are delivered with Plug-Ins as of Plug-In (-A) 2002.1.
You cannot run an initialization simulation together with an early delta initialization.
Hope this link may make you clear about Early Delta Initialization
http://help.sap.com/saphelp_nw04s/helpdata/en/80/1a65dce07211d2acb80000e829fbfe/frameset.htm
http://www.allinterview.com/showanswers/2907.html
http://sap.ittoolbox.com/groups/technical-functional/sap-bw/early-delta-initialization-459379
http://books.google.co.in/books?id=qYtz7kEHegEC&pg=PA293&lpg=PA293&dq=early+delta&source=web&ots=AM1PtX6wcZ&sig=xKOF85Gb8UtszY44zt06K6R0n3M&hl=en#PPA290,M1
http://www.blackwellpublishing.com/journal.asp?ref=1069-6563&site=1
EARLY DELTA
Early delta Initialization
How To Minimize Downtime For Delta Initialization
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5d51aa90-0201-0010-749e-d6b993c7a0d6
How To Minimize Effects of Planned Downtime (NW7.0)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/901c5703-f197-2910-e290-a2851d1bf3bb
Note 753654 - How can downtime be reduced for setup table update
602260 - Procedure for reconstructing data for BW
437672 - LBWE: Performance for setup of extract structures
436393 - Performance improvement for filling the setup tables
Note 739863
/thread/756626 [original link is broken]
Re: How to Setup and INIT from 2LIS_13_VDITM with millions of records
How downtime can be reduced for setup table update.
Fill setup tables without locking users
Initialization Setup Tables.
Hope this helps.
Thanks,
JituK

Using "Preview" for digital photos

I'm not sure if this is the correct forum for this question, but here goes: When I use Preview for viewing digital photos, it works fine for images taken with my Sony Cyber-Shot point-and-shoot, but on photos from my son's Olympus DSLR, I get this Error message: "Preview is unable to properly display this image. The file may be corrupt. Reason: Can't cache image". When I click on OK, the photo does load just fine. The Olympus is setup to take "Fine JPEG" images, not RAW. The photos load fine when using Photoshop Elements, and if I open and save the images in Elements and override the original image, then Preview does not have any problems opening the same JPEG. Is this just the way Preview works, or is there something I can do to prevent the error messages. Are the images from my son's camera too large for Preview to open? For simple viewing of digital photos, I like Preview because it creates a preview mode with thumbnails along the side, much like it does for PDF files. By the way, I'm using Preview on both my iMac and my wife's iBook, both running OSX 10.3.9. Both have 1gig RAM. I get the error message in Preview on both computers. Thank you for any input.

Hey Dan,
You might try going to preferences and in Images
Default image scale
Pick: Scale large images to fit display and nothing else
Then in PDF set to scale: 50%
After you do this QUIT Preview so the changes will take effect.
I use Preview a lot, but there are times when another image viewer is needed
and I suggest you take a look at ACDsee. This is Ver. 1.6 which is the one I use with my Panther and it works great.
You can find it here:
http://www.soft32.com/download_104490.html
Mic
Message was edited by: mickey560

How to config to use SPFILE for databse

Hi,
As I want to setup recovery settings, OEM gave a warning:
PFILE - The database is NOT using SPFILE. Changes to the initialization parameters will be LOST if the database is restarted.
How do I config to use SPFILE for databse rather than using control file I suppose? Thanks,

Thanks mdtaylor and abarra2000!
It works! because "sql>show parameter" gives spfile's location instead of null before the changing. I notice that original spfile in dbs\ directory is untouched. newly generated spfile is in database\ directory as "show parameter" indicated.
Thanks again,

Hi I have used my macbook pro with miniport to HDM, and it was working fine. Hadnt used it for a month and now when I connect the TV, the screen on the mac goes blue then back to the page but nothing comes up on the TV. Any ideas?

Hi I have a year old Macbook pro. I was using a miniport to connect it to the TV via HDM cable. It was working fine but I have used it for a couple of months kept it in a drawer and now it doesnt work. When connected to the TV the screen on the mac goes blue as though there is some signal then back to original screen but the TV doesnt show what's on the laptop. Please any suggestions, thanks??

Hello nothingissecret
Check out the article below for troubleshooting steps to resolve the issue. One would be to try a different cable or adapter to test with the television.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Used 3g for me, original setup?

Similar Messages

Maybe you are looking for