Used driver for the Voyager connection

Hi everybody.
I just want to know which driver is used to connect to the SAP BW, when I create a new Voyager connection in the CMC.
Thanks in advance.
Sebastian

Hi Sebastian,
i think that the connection goes over the OLAP processor on the SAP BW side (MDX). Voyager is an OLAP tool. I am not sure if there's some shared code (DLL,lib) among the BOBJ tool portfolio (CR, Webi, Voyager) or if we are can talk about a standalone driver (BO side). But even in this case this should not be a safe information since it can change in future versions.
Hope this helps.
Regards,
Stratos

Similar Messages

  • A drive for the Thunderbolt connection ?

    Hi ...  Is there a hard drive actually in the market that can take advantage of the Thunderbolt connection speed of my iMac Intel 27" (late 2013) ?

    Hello Old Toad,
    I have been reading and seaching around for a while for Thunderbolt for the rest of us.  So to reply to your suggestion of Googleling the web before asking, I have been doing that for many hours.  The reason why I posted this thread is that information on this topic has been pretty confusing even for a 30 year Mac addict.  Please excuse inadequate terminology ... and imprecise information.  As for the point I am tryning to make, I am pretty sure that I am right.  If it's incorrect, please explain what I am confused about.
    When reading about Thunderbolt and SSD, a newby must be pretty mixed up.  Thunderbolt is a great feature until you understand that it's speed (theoretically of 1000MBps) is limited by 2 bottle necks:  the drive's and the enclosure speed.  You can have any Thunderbolt enclosure if it is connected through a USB 3.0 interface or if it's own speed is 100MBps, Thunderbolt is nothing to be screaming about.  More, I can say that there is actually any real world external drive that can deliver at Thunderbolt or SSD speed ... at least for a respectful price for the average user.  Even with a SSD drive delivering at 600MBps, the bottle neck is the enclosure's interface that is normally at USB 3.0 speed.  The only drive, and it is internal, that seems to be delivering outstanding speed is Apple's SSD drive connected to the PCI express interface running at 1000MBps.
    So after reading, I was pretty mixed up and also amazed that guy's out there were selling the Thunderbolt dream when even with a SSD drive installed it is limited by the USB 3 output interface.  I found on the web Buffalo selling it's Thunderbolt Ministation with a SATA 1 drive running at 150MBps pretty far from the Thunderbolt pretended 1,25GBps.  I also found La Cie selling their Rugged USB 3 Thunderbolt drive promissing 385MBps with a 5400rpm drive ???  G-Force is also offering G-Force Mobile at 136MBps. 
    Oyen Digital confirmed that as of now any of their USB 3.0 or SSD drive does not work at speeds exceeding 400MBps, meaning that USB 3.0 drive delivers speed equaling Thunderbolt drive.  Even Phil0124's suggestion is running at 136MBps speed ...
    So the real thing would be to have a real Thunderbolt interface speaking to the computer's Thunderbolt interface.  Then we would have real Thunderbolt speed. So more than ever, I think this thread is pertinent.  I would appreciate be told wrong and to benefit from anyone's experience on this topic. 
    If you have found a great Thunderbolt drive (running at more than USB 3.0 speed) at a convenient and affordable price ...  please help us.
    Best regards.

  • I would like to know if you have to back up a macbook hard drive, can I use a external hard drive that has been previously used to back up several pc 's, or is it best to have a separate external drive for the Mac?

    I would like to know if you have to back up a macbook hard drive, can I use a external hard drive that has been previously used to back up several pc 's, or is it best to have a separate external drive for the Mac?

    In the Mac side of things, backups usually come in two flavors: clones or incrementals.
    A bootable clone is a bit-for-bit copy of all essential files in the startup volume. If using the Lions, clones can be made using CarbonCopyCloner or just plain old Disk Utility. These backups represent the safest protection of your info, but take the longest to do. Recovery is an inverse process: you copy the clone back into the internal drive.
    Incremental backups start with a complete backup of the startup volume and only copy whatever changed from the previous run. OS X includes the fully integrated Time Machine backup utility to do this. It is extremely easy to do and takes the least amount of time. Recovery is another matter altogether since you have to start with a freshly installed instance of the OS and have to apply all intervening backups to bring the result to the latest saved version.
    As for where the backup takes place, the recommended media is an external dedicated drive or drives connected via the fastest interface available on your Mac: Thunderbolt, USB3, Firewire, or USB2. Network-based backups, wired or wireless, are attractive but may not offer the same performance and hence take longer. Also important to note that the entire drive need not be completely dedicated to a single backup. The Mac's EFI firmware infrastructure allows for an unlimited number of partitions on a hard drive and each can be used for either type of backups.
    Holler if you need specifics on how to do each. This was just an executive summary.

  • Is it possible to have two USB drives for the IPad?  I want to bring RAW photo files from my camera, through the IPad and back to an external hard drive.  One of my cameras does not use an SD card.  How can I do this?

    Is it possible to have two USB drives for the IPad?  I want to bring RAW files from my camera through the IPad and out to an external hard drive.  One of my cameras has an SD card but the other one doesn't have a card that would fit in any of the camera devices I've seen on line.  Realted to this, I bought the IPad camera accessory.  Can I put the SD card in the device and also hook the external hard drive to the USB port of the accessory and download from the camera to the hard drive?  Can I put Lightroom or the Nikon photo editing software on the IPad?  Right now I carry a PC laptop and external hard drives with me on wildernes trips.  Internet and WiFi are not available.  Because I shoot so many photos and they're in RAW I need to download from the camera to the external drive because I run out of memory on the PC (and it has much more memory than the IPad).  I have Nikon NX software and lightroom on my PC.  I'd love to be able to reduce the weight I carry by using the IPad to edit my photos each night while on trips.  Is this possible and how would I do it?  I'd appreciate any guidance.

    No, the camera connection kit only supports the copying of photos and videos to the Photos app, it doesn't support copying content off the iPad. For your second camera instead of the SD reader part of the kit, does the iPad to camera cable not work with it for direct transfer to the iPad ?
    For Lightroom and Nikon software again no - you can only install apps that are available in the iTunes app store on your computer and the App Store app on the iPad, 'normal' PC and Mac (OS X) software are not compatible with the iPad (iOS). There are some apps that perform fairly basic editing functions that are available in the store, but nothing as sophisticated as, for example, Lightroom.

  • I have bought an iPhone4 and to be able to use it for the first time I connected into a friends itunes. Now when I want to buy itunes stuff on the phone it asks me her password. How can I set up again my itunes account?

    I have bought an iPhone4 and to be able to use it for the first time I connected into a friends' itunes. Now when I want to buy itunes stuff on the phone it asks me her password. How can I set up again my itunes account?
    Now I also have a macbook where I can sync my iphone but it doesn't allow me

    first of all only sync it with 1 computers itune account
    second settings->general->store click the appleID box with her appleID in it and log out

  • My iPod has not been working for a month now and i was hoping that you could help me.The part where you charge and sync the iPod is not connecting.There is defiantly not the lead as we use it for the iPhone and that works please could you help!

    my iPod has not been working for a month now and i was hoping that you could help me.The part where you charge and sync the iPod is not connecting.There is defiantly not the lead as we use it for the iPhone and that works please could you help!
    yours sincerly
    jackfromsurrey

    What I am saying is ..........
    The iPhone HAS to be active making calls on the UK carrier network for the carrier to identify as "theirs" and therefore eligible for the Carrier to unlock
    The way to achieve this is to use a PAYG sim making and receiving calls to establish a customer relationship  with the Carrier and then follow the Carrier's process to unlock
    With a PAYG it usually means adding a specified (by the carrier ) amount  usually £15 /£20 depending on the carrier
    This is how O2 function and according to Gemma  this is how Vodafone work

  • I am using bootcamp with windows 7, and always is showing me that there is no networks, it says I don't have a driver for the adapter; therefore i keep installing it, and suddendly windows 7 doesnt recognized it.

    I have a Macbook Air 13" (mid 2012), recently i installed windows 7 with my original disk and code. I downloaded all the drivers via bootcamp assitant, however everytime the machine keeps disconnecting spontaneously from the internet, and keep saying that there is not driver for the adapter.
    What can i do???

    I install it according boot camp instructions. My thunderbolt adapter used to work fine with windows 7, but suddenly windows 7 did not recognize the driver of the adapter, and each time i install it, happens the same.

  • I have been using iTunes for years to connect to radio and just recently tried to get on and sign pops up stating " A error occurred while contracting the radio tuning service. Check your internet connection or try again later "  I do but the same respons

    I have been using iTunes for years to connect to the radio and just recently tried to tune in and an error sign pops up stating " A error occurred while contracting the radio tunning service. Check your internet connection or try again later." There's no problrm with my internet service so what's up?

    You are probably using an old version of iTunes with which the stream link service seems to have stopped working for many users of older iTunes.  No, Apple makes no comment about this kind of thing.  It may reappear, it may not (it has been dead for over a week now).  Your solution is to upgrade the operating system version on your computer from 10.5.8 to 10.6.8 so you can run a newer iTunes, or live without.  You can still open streams if you can get the URL, and you can then save them as playlist items.

  • Where do I go for a safe driver for the Mac for use with Altec Lansing Technologies IMT227 OrbitM Ultra Portable Speakers?

    Where do I go for a safe driver for the Mac for use with Altec Lansing Technologies IMT227 OrbitM Ultra Portable Speakers?

    This is an Altec Lansing IMT227 OrbitM etc
    Is this what you have?
    Here is the specification, please note, no USB
    You are either mistaken or talking about a different model.

  • I want to install Win7 on my new iMac using bootcamp. I got a USB drive for the win7 install-disc, but I don't own a cd for the Mac OS (since it was preinstalled when I got it). I read somewhere that I need a mac OS disc as well?

    I want to install Win7 on my new iMac using bootcamp. I got a USB drive for the win7 install-disc, but I don't own a cd for the Mac OS (since it was preinstalled when I got it). I read somewhere that I need a mac OS disc as well to complete the bootcamp installation of Win7 ?
    I need some recomendations plz.

    Hello,
    you don't need OS X install-disk, but I strongly recomend to burn a Win 7 disk. You may have some problems with installing it from a USB Flash :)
    Cheers!

  • Trouble using the instrument driver for the "hp8753b"

    I am using the instrument driver for the "hp8753b", specifically the "collect and display data" driver.  I manually set my settings to the analyzer and run the VI (i.e. set start frequency to 500 kHZ and stop frequency to 1 GHz), when the VI runs with the "collect and display data" it defaults to start frequency 1 GHz and stop frequency to 3 GHz.  I have tried to modify the driver to only collect data and not to modify any settings on the analyzer but I run into errors.  Any help on this is appreciated.

    Hello,
    I have installed the instrument driver you mention in your post. I am looking at the Collect and Display Data.vi, however I need more information from you to determine why your sweep is defaulting back to 1GHz-3GHz. 
    When you say "I manually set my settings to the analyzer" are you making these settings directly on the analyzer? The Collect and Display Data.vi seems to read all of the settings from the hardware, I did not see any configuration in the VI.  What modifications were you making to the VI and what errors were you getting?
    Can you see the range on the instrument?  If so , can you determine at which point the range defaults back to the higher range?  Running in highlight-execution mode in the VI and running NI-Spy (Start->All Programs->National Instruments->NI-Spy) to perform a capture of the GPIB commands can help to determine at what point the errors are occurring.  It will also let you see if there are any commands being sent which cause the instrument to be reset. 
    Jennifer O.

  • Will there be a camera driver for the Lenovo ThinkPad X220T using Windows 10 64-bit

    Will there be a camera driver for the Lenovo ThinkPad X220T using Windows 10 64-bit? Laptop Tablet Model 4294CTO

    I installed the latest Win7 and Win8 drivers and the camera appears for Skype and in Device Manager as Integrated Camera under Imaging Devices, but does not appear in Devices and Printers. There is no VEN DEV ID property for the device. Hardware IDs are:USB\VID_04F2&PID_B217&REV_8029&MI_00USB\VID_04F2&PID_B217&MI_00  

  • I have an old (first generation) iMac that I still use sometimes for the applications that are on it. I was using it yesterday and unfortunately had a power cut. I went to turn it on today, and nothing at all happens. It's as though no power is getting to

    I have an old (first generation) iMac that I still use sometimes for the applications that are on it. I was using it yesterday and unfortunately had a power cut. I went to turn it on today, and nothing at all happens. It's as though no power is getting to it. I've checked the obvious things, changed the fuse, tried different cables, poked paperclips in reset holes, but nothing doing. I wonder if there is anyone who knows what might be wrong. I was hoping to get some of its content transferred soon, but I'm guessing that can't be done if it can't be started up. Many thanks, if you can help

    Hello,
    >It's as though no power is getting to it.
    Would it be correct to assume that no sounds at all can be heard? Also, no lights, not even green or amber at the power button?
    >unfortunately had a power cut.
    Was it possibly a power cut in connection with a thunderstorm? Any other evidence of higher than normal voltages (light bulbs, et cetera)? Has the line voltage been checked (measured with an appropriate voltmeter/multimeter)?
    If necessary, it would be possible to remove the hard drive, and then connect it to an external IDE/ATA to USB adapter (example below). That way you could gain access to files on the hard disk from another computer.
    http://www.newertech.com/products/usb3_universaldriveadap.php
    Jan

  • Is there a flash drive for the iPhone 5 so I can share

    Is there a flash drive for the iPhone 5 that I can plug into my phone, copy all of the hundreds of photos and videos I've taken of my baby nephew using the iPhone camera to, and then pull out so I can just give the drive to my sister? Downloading/transferring all those photos and videos to my computer, then emailing or sorting and burning them to a disc would take FOREVER. The photos and videos of the baby are all mixed in with my personal photos and videos I've taken and sorting them out would be a nightmare. Plus, I want the original photos and videos to remain on my camera even after I copy them for my sister. Any help/ideas would be most appreciated!

    Hi Allan,
    Thank you for responding.
    One clarification: I agree that the iPhone is not for long-term photo storage and I'm not looking to use it that way. What I'm looking for is a quick and easy way for me to get the photos/videos of my nephew to my sister so SHE can store them long-term. (Then I can delete all but a few of them and transfer them to my computer for storage pretty quickly and easily). The way I know to get all those photos/videos to her would take a very long time (which I don't have) and would require a lot of time sorting (which I don't have time to do either). Please don't suggest I pare down the photos and videos for her. This baby is a miracle baby and the Mom needs to get all the photos and videos. Understand where I'm coming from?
    Regarding not keeping any favorite photos/videos on an iPhone: It seems normal to have some favorite photos and videos remain on an iPhone, kind of like a "Grandma's brag book" of most beloved photos. Even the most no-nonsense person might have 20-30 photos of someone or something they love, so they can share them with interested people or peruse them when they want to feel connected or be grounded.
    I can't be the only person dealing with this issue/needing this type of hardware. Opportunities and need for photo sharing abound. If nothing else, it seems like an easy way for Apple to make a whole lot of extra money while making a whole lot of consumers very, very happy.
    Any advice? Again, thanks very much.

  • I have a USB adapter for my iPad, can I plug in a AT&T USB  Connect Momentum and use it for my internet connection.

    I have a USB adapter for my iPad, can I plug in a AT&T USB Connect Momentum and use it for my internet connection??

    Probably not normally, Apple has removed some of the hidden features of the USB dongle via a software update for iPad. One of those features was playing host to hard drives, keyboards, etc.

Maybe you are looking for