Used google drive and now the file won't work

I was in florida working on a windows PC in premiere pro cc i saved the file just like any other time and up loaded it to my google drive. When I got back to NY I downloaded said file and it won't open on my Mac i have premiere pro cc on both computers. How can I get this file to work, and is there a better way to send files like that i have a partner who live in FL and we will be sending files frequently. thanks for any help

Take it in to the Apple store genius bar for a free evaluation.  Then your friend will be in  a position to make an informed decision.  We cannot give you any meaningful advice unless we can physically inspect the MBP.
Ciao.

Similar Messages

  • I tried to clear my hard drive and now my computer won't work

    I cleared my hard drive and now my computer won't work

    Well, good to meet you. I hope that didn't offend you somehow. I just recognized the name and wondered if you were another fan of the book.
    Bob

  • Original iPhone using 2.0 and now the phone won't ring

    Anyone else have an issue with your 1st gen iPhone not ringing after installing 2.0? I have shut it off (then turned it back on), reset it, reinstalled 2.0 a couple times but the phone still will not ring. Oh and yes the phone is not set to silent using the switch above the volume control.
    Second issue is iPod sometimes will not play through speaker, works when after reset.

    I am now on my 4th 1st generation iphone. I bought the phone new. I've now had to see the "genious" people more times than I'd care to. They "say" they replace with new phones!!!? The latest issues is that it shuts itself down and will not start without resetting it. Then, once that's done, and I shut it down, it will not start back again. The "genious" on the phone says to restore it to factory.. and again, SAME issue. Buggy is not even close. I bought the bluetooth, and that was 2 "new" iphones, plus 3 new bluetooth headsets. So, here I go again, to the APPLE "genious" bar again.. In total, I've spent more time on this phone, fixing it's numerous issues.. Not to mention... GAS PRICES>>>>>>>> I wonder if they have a reimibursement form for how much gas I've had to use to see these idiots?...Makes me want to return it, and go back to my treo!.... Anyone else haveing these issue, please contact me directly... I'm all about a product working correctly... and spending the money on the first gen. phones, just ticks me off. [email protected]

  • I tried to update the iTunes software on my iPhone today, and now the phone won't work unless I "restore" it.  I don

    I tried to update my iTunes software on my iPhone today and plugged it into my laptop.  Before the process was complete, I received an error message saying I had to "restore" my iPhone before it would work with iTunes.  Even more importantly, and troublesome, is the fact that now my phone won't even work at all.  I can't turn the iPhone on, and all the screen shows is the iTunes icon with a picture of the white power cord.  Can someone advise if there is a way to update the software without restoring my iPhone, which will cause me to lose everything on the phone (much of which I have not backed up yet)?  Last, is my stuff already backed up by iCloud?  I believe I have sellected that option on my phone, but honestly, have never really understood what iCloud is or does.  Thanks in advance for any assistance/advice.

    why dont someone answering gthis ******* problem..

  • ITunes Crashed twice while updating my iPhone 4 and now the iPhone won't work.

    iTunes prompted me to update to the newest version (10.5.1 or whatever it is). I did that, then went to plug my iPhone 4 in to charge and it prompted me to update to whatever the newest iPhone software was. When I went to do that iTunes crashed unexpectedly midway through, telling me that an "unknown error had occured." I restarted my computer and plugged my iPhone back in only to find that all my content had been erased. iTunes told me that the device needed to be restored so I went to do that but while it was restoring, iTunes crashed again. Now iTunes wont even recognize my iPhone, which is stuck with nothing but an unresponsive loading screen and the apple logo. The phone wont turn off, and wont respond to any buttons.
    Someone please tell me what to do!

    I had almost an identical experience except that itunes didn't crash.. my now my phone won't do anything  just a blank screen..  GREAT UPDATE, APPLE~~!!  The phone worked flawlessly before.. now I have NO phone..

  • Reformated Hard-Drive and now my nano won't work!

    I had a problem with my computer, so I reformated my hard drive and reinstalled Windows XP completely. I lost everything, including my 500 song files for iTunes.
    So starting over, I reinstalled iPod Updater and iTunes and I just finished putting all my cds back on iTunes - only 400 or so songs this time because I didn't back up all my music.
    I wanted to plug in my ipod and set it back to factory settings so I can refill it because I know it might think it is another computer (and I know you can't do that), but when I do, iPod Updater doesn't recgonize it.
    What's going on and how can I fix it?
    Dell Dimension 2400   Windows XP  

    UPDATE - My iPod's battery was WAAAY low and I turned it on real quick and plugged it in. On the screen it shows this weird charging thing, but I'm guessing its charging and iPod Updater recgonizes it but when I clicked RESTORE, it said cannot mount iPod.

  • Tried updating to the new IOS and now the phone won't work, suggestions?

    I tried to update the newer version of IOS on my Iphone 4S. After the update an Itunes icon and the adapter appeared on my screen.
    I tried restoring the phone but it erased all of my data and now I can only take calls. I can no longer make calls and or send or receive text.
    Any suggestions, or should I just take it to an Apple Store?
    Any and all suggestions are welcome.

    That picture is trying to tell you that there is a problem and you must connect it to your computer and restore with iTunes to fix it.
    Allan

  • I updated the video driver and now the screen won't come on? how can I roll back the driver when I can't see the screen?

    I am running my Mac Book Pro with Bootcamp. Leopard on one partition and Windows 7 on the other. I updated the driver for the Nvidia video card then the screen went black. I tried to boot into the MAC side but the screen doesn't even show the optional boot screen. It does however sound like it's booting, I have tried hooking up a second monitor to see if it would show on that but it doesn't. I have also tried booting from the CD using the Win 7 disk, hoping that it would use the video driver on the disk instead. I'm either not doing it right (pressing ctrl & D whilst starting up) or that doesn't work either? I'm a bit lost? Don't know how to get to it.

    Take your MBP to an Apple Store or an AASP.  If you are still under warranty and/or have AppleCare, suggest that you take advantage of it & call Apple tech support. 

  • I have had problems syncing on my Windows XP computer and yesterday I got my laptop back with a virus removed and was able to sync.  Then I updated the operating system to 5.0 and now the restore won't work.  Please help!  I got error code 50.

    I have had problems syncing my iPhone 4 and my iPad on my Windows XP laptop.  My computer had a virus and spyware, but is now fixed.  I was then able to sync both phone and ipad, but when I tried to update to ios-5.0, the update worked, but the restore would not.  Now I don't know what to do with my phone.  Is there a way to get the restore to work, or should I set it up as a new phone.  I have lots of apps, etc. that I do not want to lose.

    Hello,
    Welcome to the HP Forums!
    I understand the IDT Audio driver is missing. I can help you get it back, but first I require the following information:
    1. The computer's model number. If you require assistance locating this information, please reference this website: Guide to finding your product number
    2. The computer's operating system. If you require assistance locating this information, please reference this website to determine your Windows operating system.
    3. Have you installed any new hardware on this computer, before the issue appeared?
    4. Have you installed any new software or drivers on this computer, before the issue appeared?
    Mario
    I worked on behalf of HP.

  • I dropped my iPhone 4s down the toilet and now the touchscreen won't work?

    I dropped my iPhone 4s down the toilet because I saw a spider on the seat and jumped, causing me to drop it down the loo. I fished it out and dried it off. The phone was on so I tried to turn it off so it didn't fry the inside of it. I held down the power button and the usual "Slide to power off" slider came up. I tried to swipe it and the phone wouldn't do it. I kept trying to swipe but it wouldn't let me and the screen started to do something like this: http://www.youtube.com/watch?v=Ij7r2dyqBMg
    It then stopped and stayed on the homescreen but slowly faded to a plain white screen and wouldn't do anything. I took out my SIM Card and dried it off because I didn't want it getting damaged. Then it turned to a black screen and once again did nothing, so I plugged it into my Macbook and it vibrated, indicating that it was being charged. Also, my iTunes & iPhoto icons started bouncing. The screen was still black so I unplugged it and left it on my bedside drawer to do whatever. About an hour or so later my boyfriend pressed the home button and the screen turned on, but it looked like a cloudy sky. It wouldn't do anything else so again, I left it for about an hour.
    I then tried turning the phone on and the Apple logo appeared. The buttons work fine and the home screen with the date & time appeared, but the only thing that wasn't showing up was my screensaver, it is blurred out. I put my SIM Card back in and it says "SIM Faliure" on the screen & at the top where it usually says your network etc. (T-Mobile, 3G and all that) it just says "Invalid SIM" instead. Also, I can't use the touchscreen. I can't swipe up for the options or camera, I can't swipe to turn it off & I can't unlock the phone. I don't have any rice in this house as me & my father are allergic to it so there is no point in buying it.
    It's a replacement phone & I've had it for less than three months. What else can I do? Also, there's a strange smell by the power button, but nowhere else on the phone.
    Help? Thanks - Ellie xo

    I think that we all know the answer to this one.
    Unfortunatley the device is concidered damaged by water. Apple can do an out of warranty repair which would cost $199. Generally they would just replace the device in this case for the $199.
    The alternative is to Purchase a new device.

  • HT201210 I have an ipad 2 and was upgrading to ios 5.  Unfortunately, the cable was pulled out mid sync and now the ipad won't work.  When I power on, I get an iTunes icon and a picture of the cable to connect to iTunes.  What do I do?

    disconnected mid-stream.  Now when I turn on the ipad or connect it to the PC, I get the iTunes logo and a picture of the connecting cable (which is plugged in).  What do I do?

    iOS: Device not recognized in iTunes for Windows

  • I want to transfer files from a functioning hard drive in a nonfunctioning MacBook Pro to an external drive. I have an IDE/SATA drive adapter. The files won't fit on the drive for a working computer I have. Can I use it to transfer files to the external?

    I want to transfer files from a functioning hard drive in a nonfunctioning MacBook Pro to an external drive. I have an IDE/SATA drive adapter. The files won't fit on the drive for a working computer I have. Can I use it to transfer files to the external drive?

    Good luck and you are welcome.
    Like I said, I bought one of their inexpensive enclosures and now can use the hard drive just as a source for the files that are on it...my external drives are much larger and faster so I just plug that drive in when I need something from it.
    This one is on sale for $16 http://eshop.macsales.com/item/OWC/ES2.5BPU2S/

  • When starting Final Cut Pro 7.0.3 I am all of a sudden getting a message that says "One or more of the scratch disks don't have read/ write access" and now the app won't operate - how do I fix this so I can use Final Cut Pro?

    When starting Final Cut Pro 7.0.3 I am all of a sudden getting a message that says "One or more of the scratch disks don't have read/ write access" and now the app won't operate - how do I fix this so I can use Final Cut Pro?

    Glad you found the answer.  But something seems wrong.  FCP should be able to assign the scratch disk to your startup drive.  It's not advisable, but it should be possible.  You might want to try and figure out what's going on before what ever's going on cause other problems.

  • Mom used comp....and now the dock won't appear

    Hi,
    My mom used my scanner/printer recently and when I went onto my comp to use it there was a dialogue box that I couldn't click out of so I restarted it and now the dock won't appear when I hover at the bottom of the screen.
    I had a similar problem this summer when I turned of the comp and moved it into another room to find that my desktop wallpaper had disapeared and I still havn't been able to reload it.
    Can someone help me figure out what's wrong? Thanks in advance
    Imac G4   Mac OS X (10.4.3)  

    Hello wandering:
    Try trashing the dock preference file and restarting:
    com.apple.dock.plist
    Barry

  • HT1338 I have updated my Imac to Mavericks and now my parallells won't work and I have reinstalled as per the instructions. Please help as all my data is on a hardrive that is formatted for PC

    I have updated my Imac to Mavericks and now my parallells won't work and I have reinstalled as per the instructions. Please help as all my data is on a hardrive that is formatted for PC.

    Yes I just discovered that this morning but I have purchased another external harddrive and formatted it for both and am in the process of transferring the files across it and then I will erase the old harddrive and reformat it so I can use it.
    I have learnt to format harddrives from this experience but am happy to see the back of parallells.
    Thank you for your help though it is much appreciated.

Maybe you are looking for

  • SSRS - SQL Server Spatial Query

    Hi, I was hoping someone could help me. I'm creating an SSRS report with Map and importing points via SQL Server Spatial query. I have a db table with 8,000 points bu the import only ever brings in the first 2,000 queried (no matter what the filter i

  • Importing Word Docs after recent upgrade

    I have RoboHelp Version 8.0.2.208 and importing Word docs (Word 2003 Pro) had worked perfectly. Recently, I leapt forward a couple versions to Word 2010 Pro and now when I try to import Word docs, I get the "Import Word Document Wizard cannot locate

  • Query about  Webi Rich client Install through Infoview in XI 3.1

    When we Install Webi Rich client through Infoview on a client box ,It Install all language  packages . Is this a default behavior (So that we can log it in Enhancement request) or It is Potential bug with Product. If this is a default behavior ?Is th

  • How to change a 'debug' dll to a 'release' dll (without running a new build)?

    I recently heard some best practice advice that you shouldn't rebuild your application for each environment, rather you should deploy a single package to your first environment, evaluate it, and if it passes, promote that same package to the next env

  • Downloads repeat the last item requested instead of loading a new item

    After downloading a document and printing it and then clearing from the download list, the second request for another document to be downloaded results in the first document being downloaded again.