Used half of 2gb plan in 5 days, mostly in past 2 days at same times

So, my boyfriend has had his Razr for several months now, using half his 2gb data plan at most in a month. We are now 5 days into a new billing cycle and just received notice he has used half already. I looked at his usage, mostly all small usage here and there. He has no apps, doesn't use Facebook or any social media, may check email once every few days. Here is what took place the past 2 days and this was the only data used on these dates, so this will tell you he barely uses anything data related: 8/26 11:15pm 0.17991, 8/27 5:15am 0.10815, 11:15am 0.00169 and 5:15pm 0.08532. I have Facebook, games, 2 emails and I barely use 2gb, but luckily I still have unlimited. I don't know if it's related, but last week his phone went into 3g and wouldn't go back to 4g unless he turned it off. It would be ok for awhile, then go back to 3g. The battery was also dying quickly when this was going on. Then one day it stopped doing this. I can only assume both of these complaints may be update related, but come on. If his data plan is going to be killed by crap he isn't doing himself, it's not fair that we have to pay for more data to cover for it!

Here's just an example I copied and pasted, in gb amounts:
08/25/2012
4:47 PM
USAGE BASED 2GB
0.00001
08/25/2012
4:46 PM
USAGE BASED 2GB
0.00002
08/25/2012
4:45 PM
USAGE BASED 2GB
0.00001
08/25/2012
4:39 PM
USAGE BASED 2GB
0.00001
08/25/2012
3:22 PM
USAGE BASED 2GB
0.00017
08/25/2012
3:19 PM
USAGE BASED 2GB
0.00001
08/25/2012
3:02 PM
USAGE BASED 2GB
0.00028
08/25/2012
3:01 PM
USAGE BASED 2GB
0.00001
08/25/2012
3:00 PM
USAGE BASED 2GB
0.00004
08/25/2012
2:55 PM
USAGE BASED 2GB
0.00001

Similar Messages

  • How do I set upmy Imac to allow using both my computer speakers and a Bose SoundLink system as outputs at the same time.  I can use one or the other, but not both.

    how do I set up my Imac to allow using both my computer speakers and a Bose SoundLink system as outputs at the same time.  I can use one or the other, but not both.  From systems Preferences I must select one or the other.  I want both to work all the time.

    Hi,
    I would recommend you to use 0FI_AP_4 rather using both, particularly for many reasons -
    1. DS: 0FI_AP_4  replaces DataSource 0FI_AP_3 and still uses the same extraction structure. For more details refer to the OSS note 410797.
    2. You can run the 0FI_AP_4 independent of any other FI datasources like 0FI_AR_4 and 0FI_GL_4 or even 0FI_GL_14. For more details refer to the OSS note: 551044.
    3. Map the 0FI_AP_4 to DSO: 0FIAP_O03 (or create a Z one as per your requirement).
    4. Load the same to a InfoCube (0FIAP_C03).
    Hope this helps.
    Thanks.
    Nazeer

  • I'm trying to record audio into my iPad2 using GarageBand and an iRig, but I can't monitor my tracks at the same time as recording, meaning if I lay down a drum track and attempt to record guitar, I can't hear the drums while recording. Thoughts?

    I'm trying to record audio into my iPad2 using GarageBand and an iRig, but I can't monitor my tracks at the same time as recording, meaning if I lay down a drum track and attempt to record guitar, I can't hear the drums while recording. Thoughts?

    Hi, I have this exact same problem. I haven't been using an iRig, just a cheap USB-jack cable. I managed to do this with the first cable I bought, but since it broke I've been unable to find a replacement that allows me to hear the drums while recording. DId you manage to get over this issue? If so I would really like to know how. Thanks and best wishes.

  • IMessage stops working every day at same time on wifi

    At 10-10:30 every night , on wifi, imessage just completely stops working for about a half hour. It will only send normal texts. I'm on ios 6.1.4 with an iPhone 5.

    Hello there, Jsuave23.
    There are a couple things to look into to troubleshoot and resolve your issue with Messages:
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    After Restarting your device
    feel free to review step 2 in the section for "if you still can't send or receive Messages". Since you are using WiFi the second link would likely be most appropriate for you:
    If you still can't send or receive iMessages
    Ensure that iMessage is turned on in Settings > Messages.
    To send and receive iMessages, your device must have a valid cellular or Wi-Fi data connection.
    iPhone: Troubleshooting Cellular data
    iOS: Troubleshooting Wi-Fi networks and connections
    iMessage registration validates your Apple ID for use with iMessage. If you are unable to activate iMessage, follow this article.
    If iMessage is unavailable either on the sending or receiving device, SMS will be used. You can turn this on or off in Settings > Messages > Send As SMS. Carrier messaging rates may apply.
    Verify that the Apple ID or phone number is listed in Settings > Messages > Send & Receive.
    Note: To receive iMessages sent to your phone number on your iPad, iPod touch, or Mac, you must meet the following requirements:
    iPad or iPod touch using iOS 6 or a Mac using OS X 10.8.2.
    Verify that you are signed in to your Apple ID account on Settings > Messages > Send & Receive.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • Can you use the Airport Express A1264 as an AP and a DHCP server at the same time?

    Can you use the Airport Express A1264 as an Access Point and a DHCP server at the same time?
    I would like to use it as a DHCP server and AP at the same time in my LAN (no internet, just local machines through a few switches). I was lead to belive this could be the case from a few networking friends that haven't been friendly enough to help me out setting it up.

    I need it to act as a dLink/Cisco/Linksys/etc basic wifi router, in the fact that you can access it via wifi, and it will spit out DHCP addresses (192.168.1.xxx) to everything wired downstream of it.
    I want to simultaniously provide a Wifi connection and a LAN connection at the same time
    Thanks,
    BRad

  • How can I use the built-in Isight camera with an external camera (usb/firewire) at the same time?

    How can I use the built-in Isight camera and an external video camera at the same time?
    I'm wanting to stream over Oovoo/Skype/etc. using 2 cameras.
    Thanks

    Simple question with a not so simple answer.
    (a) If you mean that you want to run multiple apps simultaneously using a different camera with each app, you may encounter computing power limitations.  Digital video is processor intensive.  The only way to know if your Mac can do this it to try it.  If the video does not work together but each app works when it it the only app running, you are likely overloading your Mac's ability to process and/or move all the required data in your data bus.  You can get a better indication of whether this is the case by watching your Activity Monitor utility while running the apps you want to use.
    (b) If you mean that you want to have more than one compatible camera connected to your Mac simultaneously for ease of changing between video sources, some, but not necessarily all, apps you are using to operate your camera(s) allow you to select between your cameras.
    How you select among connected cameras depends on which application you are using. Here is how camera selection works in a few examples:
    (1) For iChat, you can choose which iSight you use in the "Camera:" choices bar in iChat > Preferences... > Audio/Video that appears when more than one compatible camera is connected. Although your camera choices will be different, the choices bar will look something similar to the Preferences settings shown here:
    If you cannot see the "Camera" choices bar, your Mac is recognizing only one (or none) of your cameras. In that case, consider the suggestions fromhttp://support.apple.com/kb/HT2090 for iSight problems or refer to your other camera's documentation for help.
    This particular choices bar solution applies ONLY to iChat. Most other applications also have settings that allow you to choose which camera to use. However, they do not all work the same way.
    (2) For instance, iMovie HD's camera choice is NOT set via Preferences. When you have more than one compatible camera connected, iMovie6 HD uses a drop-down menu choice something like this (depending on which version of iMovie you use):
    Note: Because I had no built-in iSight connected when I made this example, and because my external iSight was not connected, the drop-down menu showed only "Time Lapse." Because your Mac has a built-in iSight, your built-in iSight would show in the drop-down menu even when no other camera is connected. Connecting an additional Mac compatible webcam should allow you to choose either camera.
    Other iMovie versions work slightly differently.
    iMovie 9 (from iLife '11) uses a different camera choice button shown in this article:
      http://docs.info.apple.com/article.html?path=iMovie/9.0/en/mov39f84285.html
    iMovie 8 (from iLife '09) is slightly different as explained in this article:
      http://docs.info.apple.com/article.html?path=iMovie/8.0/en/10172.html
    In general, you can use your Mac's help for the application in use to find out how to select among more than one connected camera.
    (3) Photo Booth in Snow Leopard 10.6.x and later uses the Photo Booth > Camera menu command to select which camera to use.
    Note for readers with older Mac OS X: The previous version of Photo Booth that came with Tiger (10.4.x) is such a simple, basic app that it offers no menu selectable choice. Unless your built-in iSight is already occupied as the camera being used by some open application before you launch Photo Booth, Photo Booth will use ONLY your built-in iSight.
    However, you can use the trick from ¶ 4 of http://docs.info.apple.com/article.html?artnum=302781 to let Photo Booth use an external camera.
    (If you have an external Firewire camera connected, it may be used in preference to any USB webcam. If that is a problem for you, merely disconnect the problem Firewire device.)
    (4) For FaceTime, launch the app and click the Video menu item.
    If your Mac recognizes more than one connected compatible camera, a "Camera" section listing the cameras from which you can choose will appear there. Clicking on the desired camera name will let you select the one you want as shown in this image from my Mac Pro and LED Cinema Display:
    If your Mac recognizes only one compatible camera, the "Camera" section will not appear in the Video menu, but FaceTime will automatically use the connected camera that is recognized by OS X.
    (5) I do not use Skype oir Oovoo.  For those or other apps, see Help for each app for info on how to select your desired camera.
    Message was edited by: EZ Jim

  • Creation of Multiple Activities for same Employee,same day and same time

    Hi Experts,
    In CRM 2007 I am creating an Activity(e.g Customer Visit) for a particular day for a particular employee. I am selecting the Option "Whole Day".
    When again I am creating another Activity same day and for same employee the ideally system should not allow me to create further activities as I have already scheduled for the whole day but its is allowing me to create as many activities i want irrespective of Time frame.
    I want to block overlappped activities created for  same emloyee same time.
    Can you please suggest me with your ideas inorder to achieve same???
    Regards
    Arup

    Hello,
    If there is no standard solution you can implement the BADI : CRM_ORDERADM_H_BADI
    Here you can see when a new activity is created, and then maybe you can cancel the creation or even replace the new activity by the existing one.
    Regards,
    Benoî

  • How can i use two iPads to play a different AU-Instrument for each Pad at the same time via WLAN?

    We have two iPads connected to the MacBook with two different Midi-Sessions. Now we want to connect the every Session to a single AU-Instrument to record live but don´t get it right. In Cubase we just had to choose the Sessions as Midi-Input.
    (Sorry for bad englisch )
    cheers

    Your second post differs form your first, in the first post you said "single AU instrument", in this last post you said "separate synths".  I'll address the second post.
    It's a bit more difficult in Logic than Cubase which has an updated more modern MIDI system.
    The iPad MIDI software will need to transmit on separate MIDI channels for each iPad.
    example:
    iPad #1 MIDI channel 1
    iPad #2 MIDI channel 2 ...etc, doesn't matter which channels as long as they're separate.
    Boot Logic:
    Go to Settings/Recording and select  "Auto Demix by Channel if Multitrack Recording"
    Now setup your AU tracks, select separate channels in the inspector, the channels must match the transmit channels on the iPod.
    You used to have to record enable the tracks, I don't believe that is necessary now.

  • Land phone dial tone lost for 8 hours per day at same time

    For 2 weeks now, I lose my dial tone approximately 9:30 to 10:30 a.m. every day and intermet and then dial tone comes back on approximately 5:15 p.m. every day.  Verizon came out and checked outside box and said it is not their problem, the box is working fine, must be something with my wiring.  The same thing happened 2 years ago and Verizon fixed something on telephone wires down the block and everything was fixed.  How can it be problem with inside wiring if I only lose dial tone for approximately 8 hours every day.  Seems like it is something with maybe a switching station, something that they switch every day (maybe high volume time period), but my phone gets left behind.  One Verizon guy on the phone said he could see it was a problem with their network and it was fixed for one day.  Since then when I have called back, they keep telling me Verizon has to come into my home as there is a problem with inside wiring and cannot give me time period other than either 8 a.m. to 12 noon or 1 p.m. to 5 p.m. for them to show up.  Anyone have a problem like this?

    Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you.
    Please go to your profile page for the forum, and look in the middle, right at the top where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
    Under “My Support Cases” you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis as the agent may be waiting for information from you before they can proceed with any actions.
    To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe".
    Please keep all correspondence regarding your issue in the private support portal.

  • Half of data plan used by Motorola app

    Can anyone tell me what "com.motorola.android.omadrm" is, and why it has used 527.4 MB of data when I have had this brand new phone (and brand new line of service) turned on for approximately 24 hours?
    I am on a 1GB plan, and some Motorola application has used half of my plan in less than a day. I am not pleased.
    Here are two screenshots. One is from Net Monitor application and the other from My Verizon:

    You are right! For some reason the OS needed to be updated yesterday and my wife ran the update.
    When we got our new phones we picked which phone number we each wanted, and ended up mixing up the boxes. So she turned on my phone and updated it, and I had no idea because at the time I had her phone.
    Just as a helpful tip, I went into Settings | About phone | System updates
    In that menu you can see "Last System Update Information" which for me had a "Time" of "Thursday, November 21, 2013 9:43 AM"

  • My ipad is on an infinite loop.  I used ios7 for a few days and then did updates on some of my apps. that's when the infinite loop started.  I have tried pressing the power and home button at the same time, but it doesn't work. Please help!

    my ipad is on an infinite loop.  I used ios7 for a few days and then did updates on some of my apps. that's when the infinite loop started.  I have tried pressing the power and home button at the same time, but it doesn't work. Please help!
    I even tried some hints posted for ios6 (turn off Ipad, holding home button and plugging in power cord at the same time and then releasing the home button)
    I did manage to get a different screen that shows the itunes icon and a power cord, but nothing happens.

    You were on the right track. You got the connect to iTunes screen and you ended to use iTujes to restore your iPad. Try recovery mode again.
    Recovery Mode Instructions
    Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
    Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
    If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
    While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
    Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
    If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
    Use iTunes to restore iPad.

  • USING TOMTOM AND IPOD FUNCTION AT THE SAME TIME

    Hi
    I plan to het tomtom application bur before I'd like to know if
    I will be able to use my iphone connected to my car player alpine for music fucntions at the same time as tomtom application
    thanks a lo for your opinion on that

    On my iPhone, I can play music using the iPod app and also use Tom Tom. The music pauses for voice directions.
    I don't have an Alpine, so I can't test that for you.

  • Can i use a bluetooth headphone and a bluetooth cycle computer at the same time on a 4s?

    I was wanting to get the wahoo bluetooth enabled cycle computer and heart rate monitor and use it at the same time as I use bluebird bluebuds bluetooth head phones. Does this many divices work at the same time?

    No, you can connect only one bluetooth device at a time.

  • Airport express: use internet and air tunes at the same time?

    Hi,
    I'd like to use and airport express to create a wirelss network (and so use the internet) AND stream music to my stereo with air tunes - at the same time. Is this possible? So far, I have been able to create a wireless network (and use the internet) OR use the airport express to play music. But whenever my internet works, itune can't find the base station - claiming it "can't be found on the network?"
    Can you do both at once?
    I'm connecting to an ethernet jack (I'm at a college). It's not a cable modem or DSL. Is this the problem?
    Under "music" in the utility configuration. I've selected "Enable Air tunes at the base station." I can't select "Enable Airtunes over ethernet port." When i try to change the network options to allow me to select this "ethernet port" option, I have to tell it how to "distribute IP" addresses. i don't know how to do this, and everything I've tried destroys my internet connection.
    I appreciat any help you have to offer. thanks
    1.5 GHz PowerPC G4, 12'' powerbook   Mac OS X (10.4.4)  

    solution:
    My problem ended up being specific to the network I'm using. There is evidently another router on the ethernet system that was assigning my airport express an IP address (192. ...), rather than letting the network DCHP give me a direct IP address (something like 160. ...). The 192 address made it impossible for iTunes to see my express base station, but I was getting internet, passed through this other router.
    The fix - and I'm not sure if this is totally kosher - was to manually enter a correct IP address for my base station. I got the IP address by seeing what this other router was sending my computer to get onto the internet. It gave me the correct router and a workable (160. ...) IP address. I'm not sure if I'm supposed to manually pick an IP address on the ethernet, but this one is working for the time being, and now iTunes can find my base station.

  • Can you use two bluetooth devices on iPad at the same time?

    Want to use the wireless keyboard along with the Jambox wireless speaker. Will the iPad allow you to connect to two Bluetooth devices at once?  Thanks!

    Seven is the Bluetooth max, but you should probably not do more than three or four and then depending on the BT protocols that each device is using.
    I use my Apple BT keyboard and my Cellular Innovations BT headphone clip at the same time without any issue whatsoever.

Maybe you are looking for