Used IPod Updater - IPod keeps saying Do Not Disconnect

I had to restore my IPod because of an issue with it. Now when I plug the IPod into my computer it says I need to use the IPod Updater to update my software. I did this last nite at 6 PM and it still says Do Not Disconnect. It has been almost 12 hrs. Help! I would like to use it on my business trip coming up.

Updating the iPod software shouldn’t take any longer than a few minutes.
First of all, try clicking on the little x in the top corner, which might take you to the next stage in the process. Sometimes it gets stuck.
If this doesn’t work, shut down the computer, disconnect the iPod, restart the computer, run the updater again, and connect the iPod when prompted.

Similar Messages

  • My Ipod keeps saying "Do not disconnect" and the update ipod is not working

    Hi,
    I just got my ipod nano a couple of days ago and after loading the itunes and then plugging in the ipod i unplugged it when it said do not disconnect without thinking. Now when i plug in my nano it keeps saying do not disconnect and although the ipod symbol appears on the itunes, no instructions have popped up to explain how the music transfers even though it says it in the booklet and when i click file the update ipod button isn't clickable. I'm just wondering if there's anything i could do

    Welcome to the discussions.
    Are you syncing manually?
    Manually Managing
    Music
    and have you seen this?
    Disconnecting the
    iPod from the Computer
    JC
    Thank you very much, i read the link on the manual and my preference was set to manually manage songs and after reading it i was able to put a couple of songs on to the ipod which is a lot better than where i was about an hour ago lol
    Thank you

  • Ipod keeps saying Do not disconnect..

    Ok.
    I bought my ipod 5gen yesterday. I installed things from the CD. When I connected my ipod to the comp the iTunes won't open automatically. So I opened it, but it wont recognize my ipod. I went my computer and then there wuz a removable disk called IPOD.. I did everything i could from the FAQs except re installing the Windowz.. mine's windowz XP service pak 2. I read posts in the bottom and there wuz solution.. going to Manage and renaming things.. but it won't work either. wut should i do..
    Sony   Windows XP   nothing

    Welcome to Apple Discussions!
    See this...
    Windows Recognizes iPod But iTunes Does Not
    Make sure you have read that one. I think you were referring to a different link.
    btabz

  • Nano keeps saying "do not disconnect"

    I have up loaded songs and my itunes recognizes my nano just fine but everytime I plug it in it just keeps saying "do not disconnect" and it never goes away. Even after it syncs and the battery is completely charged. I don't know if maybe I'm doing something wrong or even hurting my ipod.
    Please help.

    Have a look in "My Computer" and see if it is listing your iPod in there. Alternatively try using the "Safely Remove Hardware" function on Windows. That should disconnect the iPod and allow you to unplug it.
    To find iPod options, in iTunes click on "EDIT" then "PREFERENCES" then "iPod" then "Music" You should have a list of options:-
    Automatically update all songs and playlists
    Automatically update selected playlists only
    Manually manage songs and playlists
    If the third option is checked then it will not disconnect automatically.
    Lower down the page are more options
    Only update checked songs
    Open iTunes when this iPod is connected
    Enable disk use
    Display album artwork on your iPod
    If "Enable disk use" is checked, then again it will not disconnect automatically.
    To manually disconnect, right click on your iPod's name and then left click on eject.
    If that lot doesn't work, then that is the limit of my expertise.

  • My phone won't update it keeps saying its not connected to the Internet and it is. And now my apps won't work?? Help

    MY phone needs updating and it won't let me. It keeps saying its not connected to the Internet and i

    Temporarily disable any security software on the computer.

  • My ipod is saying do not disconnect

    hi my ipod is connected to mac and saying do not disconnect for a long time what shall i do

    Reset it. To do this, press and hold both the Select/Center and Menu buttons together long enough for the Apple logo to appear.
    B-rock

  • HT1435 my ipod is saying do not disconnect

    I'm trying to add music to an older ipod, and I have a message on the screen saying, do not disconnect and it's been showing for awhile.

    If the iPod is set to Manually Manage Music (on it's Summary screen in iTunes), you need to eject the iPod before disconnecting it.  The Eject button is next to the iPod's name, to the right.  After ejecting, the DO NOT DISCONNECT message should not be there.

  • Why Does It Keep Saying Do Not Disconnect

    Man every time i plug this into the usb on the computer it says do not disconnect and keeps blinking...i cant do anything else with the Ipod unless i update it in itunes or restart my computer. how can i fix this without having to open itunes to update or restart the computer...it used to do it that way

    It says that became it could loose your files if you dont eject the ipod properly when you plug in your ipod in the task bar in the bottom right corner there should be something that says something like safely remove hardware click on that and it will allow you to stop data flow and it should take the message off the screen

  • IPod keeps showing "do not disconnect"

    when i connect my iPod to the computer, it shows "do not disconnect"
    but after im done updating my iPod, it suppose to show "ok to disconnect", but all it does is flashing the stop sign and telling me "do not disconnect".
    it only stops when i disconnect it from the computer...
    .help needed......thanks

    ''does it mean that i can't use my ipod as a hard disk if i uncheck "enable disk use" ?''
    Yes. You must have the box checked to use iPod as a hard disk, and always unmount/eject iPod before unplugging it.
    '' don't like to update my ipod because the process restores everything in my ipod''
    If you choose to restore the iPod, all data is lost, but just by updating the iPod, all of your data stays on the iPod.
    Make sure you have the latest iPod Updater
    *nathan

  • After connecting my ipod, it won't my ipod stop saying "Do not disconnect"

    HP   Windows XP  

    If apart from the "Do Not Disconnect" your iPod is working normally and updating then you probably have it enabled for disk use. If this option is switched on then the Do Not Disconnect will stay there until you manually eject your iPod.
    Connect your iPod and in iTunes 6.x go to Preferences>iPod. Under the Music tab see if your iPod set to automatically sync (automatically update songs and playlists) with iTunes and also has a tick in the box marked “enable disk use". Remove this tick and your iPod should automatically disconnect after it’s finished updating.
    If you are using iTunes 7, connect your iPod and in when it appears in the source list click on it to see the preferences pane. In the "Summary" tab see if there is a tick in the box “enable disk use". Then under the Music tab see if your iPod set to automatically sync all songs and playlists. In Summary remove the tick from "enable disk use" and your iPod should automatically disconnect after it’s finished updating.
    If you have your iPod set to manual update, the box will be greyed out and ticked by default, in that case check this link: Safely Disconnect iPod

  • IPod not showing up in itunes, iPod screen says Do Not Disconnect

    I just got a nano, and installed the itunes software on the computer. It was working fine, I even put some songs in it, the Do Not Disconnect screen came up, and so I hit the eject button. As soon as I did that, the PC froze and so did the nano. Now, whenever I put the iPod in the USB port, and open itunes, the Do Not Disconnect Screen comes up, and the iPod is not listed under the Source list in itunes. What can I do?

    That happened to me on numerous occasions. if you have more than one user on your computer using itunes, it may be connecting to the other user.
    also if you have a window's computer, this link may help.
    http://docs.info.apple.com/article.html?artnum=61711
    good luck!

  • My PC Froze While My iPod Was Saying "Do Not Disconnect"

    My computer is frozen and my iPod is connected to it and saying "Do Not Discount" but my iPod is not frozen. Do I unplug my iPod or shut down the computer? What do I do?

    See the answer in your double post.
    http://discussions.apple.com/message.jspa?messageID=9154357#9154357

  • The Ipod Keeps Posting Do Not Disconnect

    Hey,
    I posted a problem, but no help. Now the I did the 5R's and now the Ipod Screen just reads; Do Not Disconnect for about 45 minutes, and is getting warm from the back (where the serial is located?) Is that good??? PLEASE HELP!!! I have been up for hours!!!!!!!!!!!!! I have a PC and I am using Windows XP.

    Hello, I just had that same problem. I searched around in the previous posts and I found a solution.
    In Itunes, go to your Ipod preferences.Make sure that your 'enable disk use' is not clicked...hopefully that will help =S because i did for me.
    TTFN

  • My ipod keeps blinking "do not disconnect"

    when i plugged my ipod in this morning it said the usual do not disconnect... but then it didnt register onto itunes so i unplugged it and the message stayed up and is still there... its been blinking for five minutes now and its unplugged... please help me

    Hi smpneedshelp,
    Have you tried resetting your iPod? To reset an iPod with a clickwheel:
    First, toggle your iPod's "Hold" switch back and forth a couple of times. (be sure to leave it on the white side of the switch, which is the Off position)
    Then, press and hold the Menu and Select (center) buttons together for 5-10 seconds.
    You might need to try this several times. For more effect, connect your iPod to a power source (a wall charger would be preferrable) while you're resetting it.
    Also, you might want to check out the rest of these five iPod troubleshooting steps, here
    The Five Rs
    Any success after trying that?
    -Kylene

  • Help Nano keeps saying do not disconnect then

    In Itunes it says iPod update is complete. I searched on here and found a link to where it says to check the iPod preferences in itunes and I did that but I still have the same problem. Every time I try to manually eject it says
    "can not be ejected because it contains files that are in use by another application"
    I don't have anything else open except for itunes. I added songs from My Music into the iPod. Could that be the problem? Could it be the wondows media player?
    AHHHH HELP!!!!!!!!!!!!!!!

    I looked under preferences and there is not a check by "Enable disk use" which is what I think you're talking about. I set almost everything to a manual update and it's still doing it. It will have the normal screen for about a second then it goes back to the do not disconnect.
    I try to manually disconnect through the safely remove hardware and I get the message "The device apple iPod USB device cannot be stopped right now. Try stopping the device again later"
    I have no clue what is going on...

Maybe you are looking for

  • Table maintenance events

    Hello, Does anyone has a code example of table maintenance events? I have a custom table ( zitab ) , with a maintenance view in SM30. I would like to use the table maintenance events for some authorisation check before the data is displayed, then, de

  • Creative ZEN Firmware 1.12.01 (17.60 MB) 27 Nov

    Creative ZEN Firmware .2.0 (7.60 MB) 27 Nov 07 Added Features or Enhancements: * Improves your player's playback time for AAC (.m4a) and WMA (.wma) files. * Improves player stability for continuous playback over a long period of time. has any tried t

  • Scheduled sleep time is not correct in OS X 10.10.2

    I have my computer scheduled to sleep every day at a certain time.  The dialog box warning that the system will sleep in 10 minutes comes up, however, the actual time it tries to go to sleep is wrong. I tried changing the time +/- an hour but it stil

  • Reinstall/repair adobe reader 11.0.08 on win xp pro sp3 - ole trouble.

    Hi, i want to reinstall adobe reader 11.0.08 on win xp pro sp3. Reinstallint using setup seem to work, but ole is not working: e.g. from word , I do insert object, click ole , select adobe acrobat object, then app freezes. 2 processes are created dor

  • HT1349 after i update for IOS5 my pics were all gone

    after i update for IOS5 my pics and application were all gone and i can only restore to the previous data as  Nov.2011....How can i get my data back ?>