Used mini mac - unknown password log on - how to reset to base start
used mini mac- unknown log in + password - need to reset to base operation - tried the command-r - got to the utilities screen but the password/log in section would not allow "highlighting" to select.
The first thing you should do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. How you do that depends on the model. Look it up on this page to see what version was originally installed.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc, which you can get from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. I suggest you install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. If you don't have the media, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
Once booted from the disc or in Internet Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive, which is what you should do.
After partitioning, quit Disk Utility and run the OS X Installer. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
You should then run Software Update and install all available system updates from Apple. If you want to upgrade to a major version of OS X newer than 10.6, buy it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able toauthorize it under your ID. In that case, contact iTunes Support.
Similar Messages
-
My hard drive crashed and using my back up, it seems my Mac mail is corrupted. How do I delete and start over?
If you are a resident of the U.S., have iTunes 10.3 or later, you can re download purchases for free.
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
I have just bought a MacBook Air OS X,10,7.2 from a friend but she has forgotten her password. any clues how to reset the password, please help. I can't personalise my MacBook until I reset it.
http://osxdaily.com/2011/08/24/reset-mac-os-x-10-7-lion-password/
-
I forgot my iphone back up file password in itune, how to reset it
I forgot my iphone back up file password in itune, how to reset it ??
I forgot my iphone back up file password in itune, how to reset it ??
-
I forget my itune password do you how to reset pls ?
i forget my itune password do you how to reset pls ?
Shanwaz14 wrote:
Hai I forget my restriction password...
To remove the Restrictions passcode you will need to either...
Restore the Device as New...
http://support.apple.com/kb/HT4137
OR...
from a Backup created Before the Restrictions Code was set....
Restore from Backup
http://support.apple.com/kb/ht1766 -
I am trying to scan multiple pages from my scanner using a Mac and don't know how to
Hi there,
I am trying to scan multiple pages using HP Deskjet 3070A (Print Scan Copy) and it is all wireless using a Mac OSX 10.6 Snow Leopard and it won't let me. And I am trying to send this document via email.
Can you offer advice as to how I can do this.
Much appreciated.
This question was solved.
View Solution.Hi,
Please refer manual for the printer and page 26 from link below.
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution" -
Can I use mini mac with my G5 second generation
I have a g5 second generation I mac Can I use it with a mini mac?
Depends what you mean by 'use it with'!
Can you give more details please? -
I cannot access my iweb account using my mac mini at work. The system is 10.4.2.
Welcome to Apple Discussions, indianajoanne!
The first thing I would do is update to 10.4.11. There have been a LOT of bug fixes since 10.4.2. -
I received some instructions but they did not work. Does anyone know how to reset this?
1 - Does it boot into Leopard?
2 - Does it have any important data on it that is not backed up elsewhere?
It it boots into Leopard you could continue using it and hope that you find your Leopard install disks later or discover some other way to overcome the lost password.
If it is fully backed up or has no important data on it you could install Tiger. -
I have forgotten my password and my iphone is disabled. I have tried resetting it but every time the time is up and I think it will work, it says "cant connect to iphone because password is on" how do i reset my iphone 5?
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766 -
I have forgotten my keychain password was wondering how to reset the password for it
I have forgotten my password for my keychain. How can I reset it?
If you don't know the keychain password, the only way to reset it is to delete the old keychain and create a new one. See the instructions in Keychain Access Help. (Keychain Access is in the Applications > Utilities folder.) The keychain is encrypted, and the contents cannot be recovered without the original password.
-
How to Reset Upgrade to Start?
I need to restart the upgrade and re-enter the paths to the DVD's...I am still in the input phase so I should be able to do this.
However, When I start SAPup with stdpar it does not go back through the input screen...rather it produced an error message..
"Basis Start release not known in PutGenSubstNamePuttb()"
any ideas?Hello Linwood,
This kind of error is usually caused by modifying certain upgrade control files. You should reset the upgrade.
The note 417670 if you have started the Upgrade already. If not yet, you can reset the prepare. It's described in detail in the upgrade guide:
1. log in as <sid>adm;
2. run: SAPup reset prepare;
3. delete the PUT directory;
Regards,
Joe -
iCloud says I don't have the correct password. How do I reset the iCloud password?
Welcome to the Apple Community.
iForgot.com -
I bought a iphone 4 off ebay and i hace a apple id but since i cant since they have find my iphone i cant not sign in with my apple id so i can not active it what can i do to fix it ?
Until your friend do this read below
What to do before selling or giving away your iPhone, iPad, or iPod touch - Apple Support
You have a brick, Apple and this forum cannot help. -
User name for Icloud or password is incorrect - How to reset?
trying to use iCloud to send and recieve email.error message 'cannot get mail- the user name or passoword for iCloud is incorrect'.
how can I reset this - no reset option is being offered. NB the password I'm using is the correct passwordTry going to https://appleid.apple.com and clicking "Find your Apple ID"
Maybe you are looking for
-
Why is my Photoshop CS4 crashing with Snow Leopard!?
IN an attempt to make my machine work faster, an employee at the apple store said I should upgrade to snow leopard and get more RAM. Snow Leopard upgrade--done. version 10.6.2 RAM--ordered 2 more gigs from crucial, not installed yet. Hardware: Model
-
Why can't I see the recovery slider in camera raw of elements?
I have the most recent version of elements, version 11. The camera raw plug-in is up to date, some 7.4 something. On the online help list and tutorials I have seen, there is a recovery slider. Yet, when I tried to practice with raw files in camera ra
-
How can I avoid automatical quantity confirmation of the items?
At our case, production is done on sales sales order for some of the materials. When all of the materials at the order are producedi I want to triger the availability check but availability check triggered autpmatically when for the first time the or
-
User cancelling their own session
Hi Is there functionality available, or something I can activate or develop, that will allow a user to cancel their session entirely from the portal. The problem we're facing is that if a user does something on a report, like try to view every articl
-
Queues are blocked in PI,I am unable to release it from SMQ2.Can you please tell me what other methods can I follow to release them.Can I delete them?is it ok Thanks