Used my card reader to import images, now see "incompatible JPEG" on images in camera

I have a Canon Power Shot A720 and used the card reader to import photos into the organizer. Now when I go back to erase some images from the camera I see many, but not all, of my 'once' images blacked out with a grey/white box in the center & a yellow question mark. Under the box it says "incompatible JPEG". What does that mean? It's never happened to me before, but I usually import my images directly from the camera.

Hi,
I'm not sure I understand your question since it's been a while since I had
trouble. When I had the trouble I was downloading from my camera and
storing them in the Organizer. My problem came when I edited those images
and RENAMED them. I guess the organizer didn't recognize the renamed
photos? Those were the images which had the yellow check mark. I now use a
card reader only, and I store them in 'Pictures' instead of the PSE
organizer. I haven't had any more problems. I think the Organizer, when
used properly, would be the best choice.....I just couldn't figure it out!
Frankly, I just didn't understand the Organizer and was used to my own
method for storage. I think that's what messed me up. I had help from a
computer technician to retrieve those images, and I haven't had any problems
since.
As for deleting images, I only delete images from my camera by using the
delete on my camera. I never, never delete from my card/camera by using the
prompt from my computer, like "do you want to delete these images from your
camera?"
Good luck!
Donna
I don't if I helped you at all. You're welcome to write back or hope for a
really good explanation on the forum boards.

Similar Messages

Hi Guys, I have a problem with Importing Pictures onto my Mac mini with Lion installed by using a Card Reader, What is the problem here so I can get Pictures onto my Computer. ,

Hi Guys,
I have a problem with Importing Pictures onto my Mac mini with Lion installed by using a Card Reader,
What is the problem here so I can get Pictures onto my Computer. ,

Hi Noob Søren
There are a few things that are confusing in your question.
As far as I know, you dont have to install Time Machine on this OS as it is already installed for you. You only need to connect a hard drive to your computer via firewire or usb, click on the Time Machine icon, Open Time Machine Preference in the drop down menu and select a disk: your connected hard drive.
You can of course reformat this connected device, partition it into a few volumes to organise data if you so wish.
I find it strange that your mac's hard drive is divided into two volumes... perhaps this was created through bootcamp?
You can access the configuration of your hd through Applications/Utilities/Disk Utilities.
Clicking on one of the icons on the right hand panel will bring the details of the contents of your hardDrive and volumes. From there you can decide to erase a partition, reformat etc....
If your hd contains more than one volume, and one of them is empty, you could decide to remove it. Back up all your important data before doing so.
Hope this helps
WN

I have Photoshop Eleent 12 and use a Windows PC. I hae been using a Canon EOS 50D for several years, which uses a Compact Flash Card. I have always downloaded pictures by using a card reader wich I connect to my computer. I Go to the Organizer, click on

I have Photoshop Eleent 12 and use a Windows PC. I hae been using a Canon EOS 50D for several years, which uses a Compact Flash Card. I have always downloaded pictures by using a card reader wich I connect to my computer. I Go to the Organizer, click on "Import" and select "From camera or card reader". Once on the Photo Downloader, I select the pictures, chose the folder and click on "Get Media" and all the photos get downloaded. Today I folled the same procedure as always, but ZI'm gettig an error message that reads"Import Failed" followed by another message that reads "Nothing was imported. The file(s) or folder(s) selected to import did not contain any supported file types, or the files are already in this Catalog." I'm puzzled by this message and don't know what to do o get my photos. Any suggestions?

The organizer doesn't care where you send your photos when you download them via the downloader or where they happen to be when you first bring them in if you use the Get Photos command, but once your pics are in the Organizer, you *must* move them from within organizer or it can't find them. You don't have to use My Pictures at all if you don't want to, but regardless of the folder where you put your photos, if you want them someplace else, you use organizer to do it.

I have 2 concerns, first my Canon 5d Mark II is not showing up when I try to download pictures. I have to use the card reader to do so. Then there is no file handling window available anywhere. Please help. Jim R.

I have 2 concerns, first my Canon 5D MarkII is not showing up in the input source when I download to lightroom. I have to use the card reader to do so. Then there is no File Handling Section listed anywhere. Please Help. Thanks Jim R.

You should find the forum for whatever prdouct your posting concerns and ask for help there.
Here is a link to a page that has links to all Adobe forums...
Forum links page:
https://forums.adobe.com/welcome

PC-Card GPIB Interface for a Desktop PC using USB card reader?

I have a IOTech's PCMCIA GPIB interface card. It works well on the notebook with LabVIEW. I want to use it on the Desktop PC using USB card reader or other connectors with LabVIEW.

Somebody wrote in about this issue. From his comments, it sounds like it may work.
See:
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RNAME=ViewQuestion&HOID=506500000008000000E6100000&ECategory=Measurement+Studio.LabWindows-CVI
Randy Solomonson
Applications Engineer
National Instruments

Want to use credit card with firefox but do not see a lock with firefox 5 on linux using priceline

want to use credit card with firefox but do not see a lock with firefox 5 on linux using priceline

Type '''about:preferences#applications'''<enter> in the address bar.
Now follow the picture.

I have a SharePoint list, that list contains photos(images), now i want display that images in spgridview?

Hi All,
i have a SharePoint list, that list contains photos(images).
now i want display that images in spgridview.
How can i display?
Thanks in advance!

Hi,
According to your post, my understanding is that you want to display that images in spgridview.
You can use a hyperlinkfield that is bound to the SPGridView. Please refer to:
Add a Hyperlink Image in a SPGridView
You can also use TemplateField or ImageField to render images. Please refer to:
Image not showing in grid view
In addition, here are two similar articles for your reference:
How To: Use SharePoint 2010 WebParts with a GridView Control to get SQL Image Data
type and other Values
DotNetSharePoint: How to display images in gridview from database using asp.net
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Can't import photos to ipad using SD card reader

I bought the ipad 3 and have the latest os. Somehow the SD card reader is not working. The import tab doesn't appear at all. I have tried rebooting, shutting down etc but no success! This is most frustrating as I'm traveling and can't download my photos!

How did the photos get on the SD card? Did it come from a camera or were the photos copied to the card on a computer?
If the later then note that the file structure and naming convention for the photos must conform to the DCIM standard.
See here for the details http://en.wikipedia.org/wiki/Design_rule_for_Camera_File_system

HT4101 downloading only JPEG files using SD card reader

I am new to Apple-iPad world,, mostly working on WinXP.
I am looking to buy a tablet to view photos while I'm on vacation and traveling. I shoot both RAW and JPEG files of each image. When I connect my SD card to an iPad Mini, I'd like to be able to download only the JPEG files, since the RAW files are too large and would quickly fill up my device.
I've been told that when you plug in the Apple SD card reader, it treats the RAW and JPEG files of an image as one, so when you download you have no choice to just select the JPEGs. Seems like a huge oversight on Apple's part, to offer camera and card connection, but then be so controlling about it, that it doesn't work for people. None of the 3-4 Apple sales reps I've spoken to know of a way around this.
At this point, I'm lookng at an Android tablet instead, since it doesn't have this limiting feature--though I much prefer the look and size of the iPad Mini screen. .
Has anyone else run into this issue? Any thoughts on a work-around?
(Two solutions that I've thought of--though I don't know if they will work--are: 1) download all of the images, then bring them up in a program like Snapseed, where I can save (really a 'save as') a new JPEG version of my image, then delete the original files that I downloaded, or 2) see if I can download a file manager app that would let me view the different files by size and by type (to identify the RAW files), then delete just these from me iPad)
Best, David.

Thanks Tom, at last an answer!
So it seems I would need to first download the image files to my tablet--including RAW files--(or whatever the constraits are in working with the Apple SD card reader), and then after the fact, use PMP to delete just the RAW files.
I assume then that PMP can view the 'standard' photo folders (called 'Albums on my iPod) created by the Apple photo app (or by the iOS, I'm not sure), is that correct?
This might be an acceptable work-around for me.
Best, David.

Not green: No sleep when using integrated card reader and hub in Dell 2709

Hello,
here's a little weird sleep and wake-up problem with a Mac Mini.
I hooked up a Mac Mini Mid 2010 model to a Dell 2709 monitor which has an integrated and self-powered card reader built in and this is connected by USB to the Mac. To the mac this appears correctly as a usb self-powered hub. I am using a so called master/slave power socket to put every periphal to sleep when the Mac enters sleep (stand by) mode. The Mac itself plugs into the Master socket and when turned on it also switches on the Slave sockets, and the monitor. Shutdwon and sleep turns the slaves off. This works good until the monitor USB hub is connected to the Mac. Then, when the Mac enters sleep state, it wakes itself up again within 1-2 seconds. The wake-up reason seems to be the USB hub from the monitor, because the hub looses power due to the master/slave power panel and disconnects from USB, which in turn wakes the Mac up again.
Now, i got also a Bootcamp partition with Windows 7 installed on the same machine. To my surprise this works as expected. It enters sleep state (called StandBy Mode in Windows) without wakening up again immediately by itself. I assume the reason for this different behaviour is just the different approach from the two OS's. OS X wakes up even when disconnecting USB gear, but Windows does not.
It took some hours to find out this. Apparently other users in this forum also have this problem in this particular scenario, like here:
http://discussions.apple.com/thread.jspa?messageID=11031781&#11031781
Unfortunately the topic is unanswered and archived.
What would solve this problem is of course to change the power connection for the monitor in a way that the integrated USB stays powered. That would be pragmatic but not be "green".
Another approach would be to change the behaviour of the Mac to not wake up when a USB device is disconnected - which makes no sense to me personally at all. I'm new to OS X and didn't found any command to achieve this.
Would be nice to make real power saving working again.

Hi David,
thanks for your reply. You mentioned that the hub in the monitor is sending some sort of signal when powered down and this causes the wake up. Good idea. To inspect this i played around a bit with some other different USB gear on the same Mac.
I discovered that any&every device that is disconnected by just unplugging it from the sleeping Mac Mini wakes the computer up again.
This example from the kernel log shows a connected Canon ip4000 printer:
Sep 16 00:26:52 MacMini2010 kernel[0]: AFPSleepWakeHandler: going to sleep
Sep 16 00:26:56 MacMini2010 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link down on en0
Sep 16 00:26:56 MacMini2010 kernel[0]: System Sleep
Sep 16 00:27:00 MacMini2010 kernel[0]: Wake reason = OHC1 EHC1
Sep 16 00:27:00 MacMini2010 kernel[0]: System Wake
Sep 16 00:27:00 MacMini2010 kernel[0]: Previous Sleep Cause: 5
Sep 16 00:27:00 MacMini2010 kernel[0]: USB (EHCI):Port 4 on bus 0x24 connected or disconnected: portSC(0x101803)
Sep 16 00:27:01 MacMini2010 kernel[0]: The USB device iP4000 (Port 4 of Hub at 0x4000000) may have caused a wake by being disconnected
Sep 16 00:27:02 MacMini2010 kernel[0]: AFPSleepWakeHandler: waking up
OK, this device is also self-powered. But what about a thumb drive?
The same can be reproduced with USB thumb drives (all other USB devices were unplugged before, the Mini was sent to sleep via the power button):
Sep 16 18:16:29 MacMini2010 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link down on en0
Sep 16 18:16:29 MacMini2010 kernel[0]: System Sleep
Sep 16 18:16:43 MacMini2010 kernel[0]: Wake reason = EHC1
Sep 16 18:16:43 MacMini2010 kernel[0]: System Wake
Sep 16 18:16:43 MacMini2010 kernel[0]: Previous Sleep Cause: 5
Sep 16 18:16:43 MacMini2010 kernel[0]: USB (EHCI):Port 1 on bus 0x24 connected or disconnected: portSC(0x301002)
Sep 16 18:16:43 MacMini2010 kernel[0]: The USB device Cruzer Crossfire (Port 1 of Hub at 0x24000000) may have caused a wake by being disconnected
So, either:
- OS X or the Firmware can not distinguish between connect and disconnect and wakes up the computer at both events. The log above shows the opposite in the last line.
or:
- This behaviour is by design. (But makes no sense for non-block-level devices. Unplugging = Wake-Up?)
or:
- Something with EFI ?
Now i am poking in the dark.
The Unibody-Mini is really a light-sleeper...

Cannot use the card reader on my Equium A100

I've put my SD HC card into the reader, and ensured it's clicked in properly.
But nothing is happening. I recently reformatted my hard drive.
Can you please tell me which driver I need?
I've seen these on the toshiba downloads page and think they might be of help?
SD memory format, SD secure module, and also SD utilities.
I hope someone can help me, as I really need to get the info of this card!
Thanks.

Hi
I assume you use Win XP.
The Flash Media Driver from Texas Instruments is the driver for card reader controller.
Download it and install it!
PS: not all cards are supported and compatible so if an card will not work in the card reader then sometimes this doesnt mean that an card reader driver has not been installed
Anyway, in device manager the card reader should be recognized properly!

Cannot use thunderbolt card reader

I purchases the authentic authorized and over priced official Apple thunderbolt sd card reader. I am using it on IPad Air running IOS 8.1
I plug it in and get Cannot use Device Message USB Storage Devise Not supported
The sd card is FAT formated and has a DCIM directory which I read was required to make the card readable
(Although the same cards were readable on a IPAD 2 with the older non thunderbolt connector
Do I have to also but the SD card from apple to make it work??

hi. you'ne not talking about thunderbolt (Macs) but lighting connector (i know, it gets quite confusing)
"Do I have to also but the SD card from apple to make it work??" : Apple doesn't make SD cards, so no.
Contact Apple Support, these SD readers often have problems

Satellite P300-18M - Is using the card reader for Vista Ready Boost OK?

Hi there,
I have a P300-18M, and, due to getting a new phone, have an 8GB Micro SD Card spare.
I have put this in the card reader, and I am currently using it for Ready Boost, even though I have 3GB of RAM, there is definately a performance boost...
However, does anyone know if this could endanger the card reader? (ie damage it in any way) from being used all the time?
Thanks
Jack

Hmm. I wonder about the 8GB Micro SD Card.
As far as I know and according to some details in the internet, the Satellite P300 supports the microSD (with adapter) card 512MB - 4GB.
Usually the notebooks card reader should not recognize bigger microSD cards than 4GB.
Nevertheless I doubt it could affect the card reader functionality in worst case the 8GB microSD card will not be recognized by card reader
Cheers

Copying files to SD card using USB card reader

Everytime I try to copy mp3 files to an SD card using a USB card reader my notebook hangs after just a few MB have been transferred. what should i do?

I myself have seen this happen right in front of me with a customer. Sometimes you have to me a little more selective with your card readers because not all of them work right out of the box.
I have found the Zio corporation readers to work splended with Mac OS X you can find them at Compusa I haven't really seen them any other place. But IMHO the issue is with your reader and not your memory.
As for the part number on the reader from compusa it is as follows that is if you are willing to give it a try....
Thunderbolt SD / MMC / MS Reader / Writer
Manufacturer: Zio Corporation
Mfg Part #: CM28100
Product Number: 332371

I USE GIFT CARDS FOR PURCHASES(VISA, MC) NOW I CAN'T MAKE A PURCHASE. THEY SAY I HAVE TOO MANY CREDIT CARDS ON FILE

They say I have too many credit cards on file for my username- purchase cancelled. I use gift cards for gaming purchases (Visa,MC) so I have used a few, but its a gift card.

This is most likely a security precaution since they probably assume that someone using multiple credit cards over a short period of time may well have stolen them. Go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store and request assistance.
Regards.

Used my card reader to import images, now see "incompatible JPEG" on images in camera

Similar Messages

Maybe you are looking for