Used pc mover to transfer elements. won't open cant uninstall elements 10

It still works on old machine but I can't do anything with it on the new one. How do I get it onto the new machine?

Well I followed the instructions with the HP supplied PC Mover tool and it did in fact move numerous programs including arcsoft , roxio, turbo tax winzip,several photo editing programs. Microsoft street & trips, Delorme , and they all work fine except Adobe elements I moved as well but when opening it says to uninstall and reinstall. OK fine but I can’t uninstall it. It still works on the old computer and the help says to deactivate it so it can be reinstalled to the new computer. Adobe online says go to help in the application and select deactivate. Every time I select help it takes me back online to the same statement. How do I deactivate so I can reinstall with the original DVD set?

Similar Messages

My free apps purchased using my cousin's apple id won't open anymore on my iphone but apps donwloaded using my own apple id still works. Why is it like that and how can I make apps purchased using my cousin's apple id work on my iphone? Help!

My free apps purchased using my cousin's apple id won't open anymore on my iphone but apps donwloaded using my own apple id still works. Why is it like that and how can I make apps purchased using my cousin's apple id work on my iphone? Help!

Welcome to the Apple Community.
Delete the apps purchased by your cousin and purchase your own.

HT3775 hello! I have downloaded a .mov file and it won't open in quicktime...any suggestions? Thanks!

Hello! I have downloaded a .mov file and it won't open in quicktime...any suggestions? Thanks!

get VLC player media
it plays everything

Quicktime 7.1.3 Won't Open or Uninstall

Just downloaded the new Quicktime and now it won't open or uninstall.
Any page I go to that uses QT says "an error occurred inside the plug-in on this page" and then "the plug-in did not initialize properly".
I only downloaded the new version because the sound was static-y on anything I watched with the old version.
Now I'm completely stuck.
Please be gentle with the big sticks, this is my first time.
Compaq Presario Windows XP

A fatal error has occurred.
okay. when folks get that as a "standalone" error message on an attempt at a QT install or uninstall, it's usually best to completely uninstall QuickTime and itunes (if you have it) from the PC and reinstall again from a blank slate.
try the procedure from the following post (it includes instructions on what to do if Add/Remove won't let you uninstall an application.)
http://discussions.apple.com/click.jspa?searchID=-1&messageID=3366434

Our imovies were accidentally saved as QuickTime movies. Now, they won't open. Neither program is recognizing the format. Ay suggestions?Ay suggestions?

Our imovies were stored in an external drive. The files were moved to drop box. We moved them back over to the external drive. Now, they won't open and look like quick time movies when you look at the file names. Neither quick time nor imovies can open the files, though. Any suggestions?

Just an update... A rep contacted me and we did a screen share. They were convinced that I wasn't full of <insert proper word here>. They promised to get back to me in a few days, and now? A few months later? Nothing.
Still no files. Still no correction... Still no nothing from Adobe.
The person I spoke to was kind, saying he'd make sure I got CC for free for a while...
Still though, no follow up.
Adobe, are you going to correct this or just let your customer suffer at your mistakes?

I recently upgraded from a iMac mini PPC (pre-intel chip) to a new iMac (intel chip). I know that some of my software won't functionally transfer over, but I have some files that were done using Appleworks (.cwk text files) that won't open. Conversion?

Is there a way to convert .cwk text files I saved from my iMac PPC so I can view them on my new iMac (intel chip)? I get a message when I try to open them now that says PowerPC applications are no longer supported.

1. Read Roger Wilmut's excellent series of articles: Abandoning Appleworks
2. Considering running Appleworks in Snow Leopard (with Rosetta) installed into Parallels for use in Lion or Mt. Lion
[click on image to enlarge]

Used Migration Asst and Word / Excel won't open on Macbook Air

I used the migration assistant to transfer Microsoft Word from my Macbook Pro to my Air and originally it was working, but now everytime I try to open and Excel or Word doc, it launches the Microsoft Office Setup Assistant. The only 2 options are to Learn More and Register. I've clicked on both and they take me to a web browser where it shows me 2011. I don't understand why it worked originally and now it's not working?
Any suggestions?

Migration Assistant is usually pretty good at copying software and all the requisite library files, so on the face of it, this should have worked. It leads me to wonder hich version of MS Office are you trying to use?
ON EDIT: Prior versions of Office are PPC-native apps and Lion doesn't support non-Intel software. If your MBP was running a prior MacOS (10.5 or 10.6 for example) then an earlier Office suite would work on that, but not when transfered to a Lion-based system.

Safari won't let me get on a website that I've use often. It say it won't open because its a local file! What can I do?

Why won't safari let me open a web sight that I've used often? All it says is its a local file

Also, when I go on to safari, another alert pops up that safari cannot verify the identity of the website, anything that I type in to as common as google.com. It gives me 3 options to either cancel, look at details, and continue. I've looked at the details of the website of Google and it is legitimate the site. Any help?

Exchange 2013 using ARR reverse proxy OWA options won't open

Hi,
I've been using the exchange team's blog post (http://blogs.technet.com/b/exchange/archive/2013/08/05/part-3-reverse-proxy-for-exchange-server-2013-using-iis-arr.aspx)
as a guidelin on configuring my ARR deployment in my lab.
Everything was working perfectly right until i got the last part of the blog on restricting the pattern matches.
The rewrite rules all work fine and everything is working as expected with the excpetion of the fact that i cannot access the options in OWA. ECP itself works great if i access it via the
https://ecp.domain.com/ecp url, but as soon as i use the https//mail.domain.com/ecp it just wont display anything.
Looking at the failed request logs it just shows that it executes a 302 rewrite to ecp.domain.com, which is what i would expect it to base done rewrite rule matching
https://mail.domain.com/ecp to the ecp.domain.com server farm.
If i look at the iis logs it looks like it's getting into some sort of loop (the section below is about a 10% of a single attempt to access the options pages:
2014-06-28 12:25:38 xxx.xxx.xx.xxx GET /ecp/ rfr=owa&X-ARR-CACHE-HIT=0&X-ARR-LOG-ID=6983c585-b0ea-4fd0-9bb1-fc747ee8e992 443 - xxx.xxx.xx.xxx Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+6.2;+WOW64;+Trident/6.0;+.NET4.0E;+.NET4.0C)
- 302 0 0 15
2014-06-28 12:25:38 xxx.xxx.xx.xxx GET /ecp rfr=owa/&X-ARR-CACHE-HIT=0&X-ARR-LOG-ID=d32a3a4f-d8a6-4712-91d4-56360be33793 443 - xxx.xxx.xx.xxx Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+6.2;+WOW64;+Trident/6.0;+.NET4.0E;+.NET4.0C)
- 302 0 0 0
2014-06-28 12:25:38 xxx.xxx.xx.xxx GET /ecp rfr=owa//&X-ARR-CACHE-HIT=0&X-ARR-LOG-ID=14797897-f1ad-454a-b73c-fde041a43d2b 443 - xxx.xxx.xx.xxx Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+6.2;+WOW64;+Trident/6.0;+.NET4.0E;+.NET4.0C)
- 302 0 0 0
Did anyone ever run into something like this? Or have an idea where i may have made a mistake? I've tried everything i could think of.
The rewrite rules i have in place are basically exactly the same as the exchange team's blog but just in case i overlooked somehthing, please se the image below.
thanks in advance for your time

Hello,
I wanted to see if anyone has any suggestions on reverse proxy options that can do pre-authentication like TMG use to do? I am currently trying to deploy out a new Excahnge 2013 setup in coexistence with an existing Exchange 2010 environment
which will then be migrated over. And one of the requirements is to block certain users from accessing webmail externally while still allowing others to access webmail. That is currently achieved by using a TMG server but that is going to be decommissioned
along with Exchange 2010.
I have been searching online but so far I have not found anything that seemed to meet this requirement. I have seen that IIS Web Application Proxy tied in with AD FS would do the job. But there is some issue there with Excahnge 2010 still being active that
won't allow it to work. Some suggestions I have seen online involved changing permissions on the IIS directory or modifying web config files but those options didn't seem like they provided a consistent result.
So I am looking for some sort of option that is either inexpensive or some means of leveraging existing Microsoft technologies to achieve my goal any suggestions would be helpful.
Nicholas,
How about IIS ARR?
http://blogs.technet.com/b/exchange/archive/2013/07/19/reverse-proxy-for-exchange-server-2013-using-iis-arr-part-1.aspx
http://blogs.technet.com/b/exchange/archive/2013/08/02/part-2-reverse-proxy-for-exchange-server-2013-using-iis-arr.aspx
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Deleted voice memos using Syncios. Now Voice Memos won't open and iPhone won't sync.

I deleted all voice memos from the iPhone using Syncios, and now I'm having the following issues:
1) Voice Memos app is broken on iPhone. It opens and then immediately closes.
2) Can't sync via iTunes! Get the following error message:
The iPhone "[iPhone Name]" could not be synced because the sync session failed to start.
3) Syncios is not recognizing the device even when connected. Error message:
Device disconnected, please reconnect the device.
It looks like deleting the voice memos using Syncios did something else to the phone to break it.
Please help ASAP.

Same problem here. I contacted Syncios and they opened a bug report, but I it seems that they don't have any workaround for the moment :-/
In my case, I also discovered that my iCloud backup was corrupted when restoring my iPhone 6 in order to "fix" all these problems (had to wipe my phone to use it again...)... So it's possible that this Syncios bug also damages iCloud/iTunes backups, which would be very embarassing for them.

Quicktime: Sound off during movie recording and preferences won't open

Ever since I updated to Snow Leopard I can't open Quicktime preferences anymore. In addition, when I try to record a video+sound, the sound is always off and not recording in real time.
Does anyone know how resolve these issues?
Thanks in advance!
Message was edited by: Narziss

Ditto to the above. I too am having the same symptoms of no audio within GB3 only after upgrading but levels light up perfectly plus I am unable to to address GB prefs without first rebooting. What's up with this? All other iLife '06 apps run fine on my G4 Digital Audio. This was after a fresh install of iLife '06 by the way running X.4.5.
I tried looking up the answers on the link that samccormack kindly provided above but nothing happens. I simply get an error message. Might you be able to let us know on this thread what the link was about or how to address the no audio and vanishing preferences that refuse to open up within GB3?
TIA

ITunes won't open after uninstalling FCP 7

I had to reinstall FCP 7 so i used the "uninstall FCS" application that came with it. After doing so i went to check my itunes while it re-installed. I suddenly got a " you are not authorized on this computer" message. And only had an OK as a response. This only came up once and it still confuses me. then itunes crashed and i got the re-open dialogue box. "no biggie" i'll just re-open. then the same message popped up. And now for 24 hours i have had no access to itunes.
at this point it starts to "checking your library" and then after about 3 seconds it stops and crashes. i have tried every fix i've found. But here's the Crash report. please help i think it's a problem with core.
Process: iTunes [3562]
Path: /Applications/iTunes.app/Contents/MacOS/iTunes
Identifier: com.apple.iTunes
Version: 10.2.1 (10.2.1)
Build Info: iTunes-10210101~1
Code Type: X86 (Native)
Parent Process: launchd [114]
Date/Time: 2011-04-07 16:22:04.393 -0400
OS Version: Mac OS X 10.6.7 (10J869)
Report Version: 6
Interval Since Last Report: 457705 sec
Crashes Since Last Report: 22
Per-App Interval Since Last Report: 307222 sec
Per-App Crashes Since Last Report: 22
Anonymous UUID: FF111D74-5537-4F96-8D06-3DF6F0A0911D
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 9
and here's the thread crash.
Thread 9 Crashed:
0 com.apple.CoreFoundation 0x9590df64 CFRelease + 196
1 ...le.MediaToolbox.AVCFSupport 0x017ac42d _FigCFCaptionRendererAddCommandDataForRow + 4727
2 com.apple.avfoundationcf 0x011384ec _AVCFInitializeRetainedProtectedContentPlaybackSupportSessionAsynchronouslyForP roviderWithOptions + 289
3 com.apple.iTunes 0x007e0031 0x1000 + 8253489
4 libSystem.B.dylib 0x950d07fd pthreadstart + 345
5 libSystem.B.dylib 0x950d0682 thread_start + 34
Thread 9 crashed with X86 Thread State (32-bit):
eax: 0xffffd08a ebx: 0x9590dead ecx: 0x00000000 edx: 0xa05874c0
edi: 0x21a1c490 esi: 0x00000000 ebp: 0xb0102ef8 esp: 0xb0102ee0
ss: 0x0000001f efl: 0x00000246 eip: 0x9590df64 cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x0000001f gs: 0x00000037
cr2: 0x017b0828

the error read "you do not have enough access privileges for this operation" and this time it was a thread 14 crashed. same corefoundation though.
Process: iTunes [4040]
Path: /Applications/iTunes.app/Contents/MacOS/iTunes
Identifier: com.apple.iTunes
Version: 10.2.1 (10.2.1)
Build Info: iTunes-10210101~1
Code Type: X86 (Native)
Parent Process: launchd [114]
Date/Time: 2011-04-07 16:55:45.301 -0400
OS Version: Mac OS X 10.6.7 (10J869)
Report Version: 6
Interval Since Last Report: 459725 sec
Crashes Since Last Report: 24
Per-App Interval Since Last Report: 307242 sec
Per-App Crashes Since Last Report: 24
Anonymous UUID: FF111D74-5537-4F96-8D06-3DF6F0A0911D
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 14
Thread 14 Crashed:
0 com.apple.CoreFoundation 0x9590df64 CFRelease + 196
1 ...le.MediaToolbox.AVCFSupport 0x017ac42d _FigCFCaptionRendererAddCommandDataForRow + 4727
2 com.apple.avfoundationcf 0x011384ec _AVCFInitializeRetainedProtectedContentPlaybackSupportSessionAsynchronouslyForP roviderWithOptions + 289
3 com.apple.iTunes 0x007e0031 0x1000 + 8253489
4 libSystem.B.dylib 0x950d07fd pthreadstart + 345
5 libSystem.B.dylib 0x950d0682 thread_start + 34
Thread 14 crashed with X86 Thread State (32-bit):
eax: 0xffffd08a ebx: 0x9590dead ecx: 0x00000000 edx: 0xa05874c0
edi: 0x195bae30 esi: 0x00000000 ebp: 0xb0627ef8 esp: 0xb0627ee0
ss: 0x0000001f efl: 0x00000246 eip: 0x9590df64 cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x0000001f gs: 0x00000037
cr2: 0x017b0828

Please Help! Lost all Desktop Icons, Finder won't open & Cant shut off iMac

Hi Mac Users,
I need some serious help please and thank you --- my iMac with Mac OS X 10.5.6 has lost all its desktop icons, I can't open my finder (i've tried relaunching and rebooting my computer, which won't even do a hard shut off). I can open apps on my dock and that is about it.
I did read in another discussion to delete the preference file, but I can't get access to the library?!? And I also read to try doing a disk repair from the install disk and when I insert the disk into my iMac I don't get a pop-up window asking what i'd like to do and since the finder does not open I have to way to even start the disk up to attempt to do a disk repair????
Any suggestions/recommendations are greatly appreciated.
Sincerly,
desperate iMac kt1611

When you tried to do a disk repair from the instal disk, did you actually boot from the instal disk? You should.
Have you read the manual that came with your iMac and followed the appropriate steps?

Safari won't open after uninstalling Mackeeper

I restarted my computer in safemode so that I could removed Mackeeper. I moved Mackeeper to the trash and emptied the trash. Now when I try to open Safari, I get a problem report saying that Safari quit unexpectedly. Help, please!!

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if Safari crashed, you would enter "Safari" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

ITunes won't open or uninstall and reinstall

I recently tried to download iTunes 10 but a part of it didn't download right and now when I press iTunes it says, "Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item." Then when I try to uninstall it says the installer has insufficient privileges to modify this file. And when I just try to download it again from apple.com it doesn't let me download it. I just recently bought an iPod touch and I haven't been able to do anything with it because of iTunes, so any help would be really appreciated.

I am also having this problem. Only started tody.
Origially I couldn't open the program as whenever I tried the shortcut or the file it came up with a message that said it had been moved.
So I uninstalled and then re-downloaded the setup files and re-installed.
Now I get the message:
"Windows cannot access the specified device, path or file. You may not have the appropriate permissions to access the item."
I cannot uninstall or re-install either, this gives the message:
"The Installer has insufficient priviledges to modify this file: C:\Program Files\iTunes\Acknowledgements.rtf.
Please help!

Used pc mover to transfer elements. won't open cant uninstall elements 10

Similar Messages

Maybe you are looking for