Used pictures not added to the calendar items ...

Hi ...  Why aren't the pictures used to create the calendar not added to the calendar items (in parenthesis) ?

Hi ...  Why aren't the pictures used to create the calendar not added to the calendar items (in parenthesis) ?

Similar Messages

  • Events invitations are note added into the Calendar

    I have a back end and front end calendar 6.3 environment with convergence connecting to the front end. When [email protected] invite the [email protected] to an event only an email notification of the event is sent to the userB, the invitation is not added into the userB calendar, in order to accept, decline or cancel the invitation.
    For this environment i have both iwc and uwc active, but no matter what interface I use the behavior is the same.
    My question is:
    1. In a back end and front end calendar environment how should sent the emails notifications?
    2. Why userB can´t see the invitation userA sent to him?
    3. Where and how I can verifity the invitation is sent? in the back end / front end?
    I saw the thread http://forums.sun.com/thread.jspa?threadID=5432165. But the users have all the icsExtendedUserPrefs attributes. I also set the variables user.cal.enablenotify and user.cal.enableinvitenotify but still not getting the invitation within the calendar.
    Products version:
    Sun Convergence 1.0-12.01 (built January 16 2010 - 21:38:59)
    Sun Java(tm) System Calendar Server 6.3-20.01 (built Oct 23 2009)
    Sun Java(tm) System Messaging Server 7.3-11.01 64bit (built Sep 1 2009)
    libimta.so 7.3-11.01 64bit (built 19:54:45, Sep 1 2009)

    Duplicate thread, refer to:
    http://forums.sun.com/thread.jspa?threadID=5437550

  • I am subscribed to iCal Jewish Calendar but the dates of holidays etc. do not appear on the calendar. They used to, but now there is nothing. What can I do to make the festivals show again?

    I am subscribed to iCal Jewish Calendar but the dates of holidays etc. do not appear on the calendar. They used to, but now there is nothing. What can I do to make the festivals show again?

    jd,
    Instead of using the Apple supplied Jewish Holiday Calendar, try http://www.hebcal.com/ical/

  • TS4337 I have a Google calendar that is syncing with my iPad and on my MacBook Air. However, the calendar items are not showing up when I access iCloud via the Internet. Any suggestions?

    I have a Google calendar that is syncing with my iPad and on my MacBook Air. However, the calendar items are not showing up when I access iCloud via the Internet. Any suggestions?

    On the iPad tap Settings > iCloud
    Toggle Documents & Data off then back on then restart your iPad.
    Hold the On/Off Sleep/Wake button down until the red slider appears. Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears.
    On the iMac open System Preferences > iCloud
    Deselect the box next to Documents & Data then reselect it then restart your iMac.

  • Data not adding for the same Key up in Infocube

    Hi,
    My Dataflow goes like this:  Datasource  -> DSO -> Infocube.
    I have created 2 DSO's for Deliveries Header & Delivery Item Seperately which gets data from 2LIS_11_VCHDR & 2LIS_11_VCITM Datasources.  Both DSO's have Delivery Number & Fiscal Year variant as Key.  20 records are getting loaded to each DSO's seperately.  Both the DSO's have the same Delivery Numbers & Fiscal year Variant for this 21 Records in their respective Loads as given below:
                                     DSO 1                                                                  DSO 2
    S.No.       Deliver No.    Fiscal Year Var.                          Delivery No.       Fiscal Year Var.
       1               12345                     V3                                          12345                         V3
       2               28456                      V3                                          28456                        V3
       3               34986                      V3                                          34986                        V3
    Now, I am loading data from this 2 DSO's to one Infocube, Deliveries Infocube.  The problem is, after the Data load, when i go to the Contents of the Infocube, I could see 42 records.  As per Infocube, it should add up the values for the same key.  My Delivery numbers & Fiscal year vairant are the same in both the DSO's, so i should have got only 21 records.  Why is the Infocube not adding up the records in this case, am i missing anything here?
    Thanks & Regards,
    Murali

    Hi Murali,
    As you are loading data from two different sources, there are two different requests and that is why you are getting 42 records, if you want to check the data consistency then create a query on top of this infocube and then check the values of key figures for delivery no's. or verify your data through query.
    If you don't want to create query then you can use aggregation option from the display data of Infocube.
    If you compress both the requests then you will see only 21 records in infocube.
    Regards,
    Durgesh.

  • Exported Files(pictures) not Added to Library

    Hello,
    I installed Lightroom 4.4 recently.  I have been using 2.x for years.
    I exported a number of jpg files into a JPG subfolder.  These jpgs were generated from cr2 files.  The "add to catalog" option was selected.  My problem is that not only the exported files/pictures were not added to the catalog but that I cannot add them manually (by syncing the upper-level folder).
    I used to do it like this for years and it worked. 
    Any comments, ideas? 
    Thank you!

    Hello,
    Have you found where the files are being exported to?
    Are they in the correct place? (IE. where ou expected)
    Are you certain the first option of the export dialog was Export to: Same folder as original - and not - Specific Folder before electing a Subfolder of JPG?
    Yes to all of the above.  The new (exported) files are where I want them to be, i.e., in the same subfolder as the CR2 files.  The CR2 files are in one sub-folder named CR2 and the JPG files are in the JPG subfolder named JPG of the same containing folder.  I can see/browse/display the exported files in explorer.  The export worked as expected and placed the newly generated jpg files in the right place.  The only thing that did not work as I would expect it to was that the newly generated files (and folder) were not added to the library.  If I remember well this is how my Lightroom 2 was behaving as well.  This is not a big deal, or WAS not a big deal as in LT2 I would then synchronize the folder and bring all the exported files into the library. 
    My current problem is that syncing does not work as it used to; it does not list the JPG folder(s) (or any of the exported jpg files in these folders) as part of what to sync.  The folders are physically there but they are not selectable or visible as part of the sync, as if they were already in the library (they are not) or as if they were deliberatly ommitted for some reason...
    Do you have any filters active in Lightroom that would hide the jpgs?
    I did not turn on any filters on.  Where are the filters so that I could check if something is not on by default?
    Thanks!

  • Since Mavericks update my iPhone and iPad calendars are NOT syncing with the calendar on my MacBook Pro

    Since Mavericks update my iPhone and iPad calendars
    are NOT syncing with the calendar on my MacBook Pro.
    I used to use iTunes but don't see the options now.
    Does anyone know how to set up a sync.?

    I have temporarily solved the sync problem by using an older MBAir running snow leopard, I exported
    both calendar and contacts and imported them in the MBA and synced normally.
    Since I'm not about to send my data on the cloud, or setup a server to just sync my iphone,
    I think this is a good workaround ! BTW I stopped updating my contacts and calendar on the MB, I only
    update the iphone until a permanent solution is found !
    And they better come up with one soon, because I'll just switch to an Android phone and Ubuntu linux for my MBP, Apple should make our lives easier, not harder !
    I'm sure Samsung is having a ball ever since the sync issue was made public !
    Hopefully Apple is listening and will make things right again !

  • The workflow could not check out the list item.

    Hi Guys,
    I have a workflow enabled on document library and it needs to started manually.
    Whenever user starts workflow manually, gets following error:
    "the workflow could not check out the list item. Make sure the list item is not checked out." list item is not checked out & this workflow was working smoothly earlier.
    OutCome: The workflow operation failed because the workflow lookup found no matching item.
    I have gone through below links:
    https://christopherclementen.wordpress.com/2014/05/23/oob-approval-workflow-error/
    https://social.msdn.microsoft.com/Forums/office/en-US/f673d0f6-92eb-4057-95ff-ed3cb7790360/the-workflow-operation-failed-because-the-workflow-lookup-found-no-matching-item?forum=sharepointcustomizationprevious
    Any clue on this?
    Thanks, Nilesh

    maybe check out for editing documents setting is turned on so wokrflow needs doc to ce cheked out before proceding and user might not have permission to do that.
    please refer below link:
    http://sharepoint.stackexchange.com/questions/32399/workflow-error-the-workflow-could-not-update-the-item-possibly-because-one-or
    http://community.office365.com/en-us/f/154/t/243062.aspx
    http://stackoverflow.com/questions/1272957/document-checked-out-in-sharepoint-when-workflow-starts
    Please mark as answer if you find it useful else vote for it if it is close to answer..happy sharepointing

  • The cluster server element 441305751 is not added in the EP cluster context

    Hello Experts,
    We are using load balancer to distribute the load across of our four portal servers nodes. Lately, two of our nodes are behavior very strangely; it continuously stopped working momentarily and it started back up again automatically by it self. And the users usually received a message u201C500 internal server erroru201D.
    #1.5 #001372559B8800280000000200002D940004692BC78C988A#1241536659228#com.sap.engine.services.prtbridge##com.sap.engine.services.prtbridge####n/a##defe75c0398711debfb1001372559b88#SAPEngine_System_Thread[impl:5]_55##0#0#Error#1#/System/Server#Plain###
    The cluster server element 441305751 is not added in the EP cluster context,
       because prtbridge on 441305751 is stopped  or not yet started (maybe the server is starting or shuting down).
    Any helps would be appreciated,
    davidn

    HI David,
    Did you figure out why it happened? we have same exact problem and same log was written, could you please share your solution.
    Thanks

  • HT201272 Season pass notice does not always download.  It does not appear in the purchased items. I am responding to an email stating 'this week's TV show is ready for download'.

    Season pass notice does not always download.  It does not appear in the purchased items. I am responding to an email stating 'this week's TV show is ready for download'.  Any suggestions?

    Been having the same problems all week. And am got a generic, not-at-all-helpful response from my initial inquiry with support, then absolutely no response to my follow-up requests. There seem to be a fair number of people posting this problem, so not sure why we're being ignored.
    Was able to eventually download the episodes manually via the 'purchased' link, but it's about 10 more steps than normal.
    Also noticed that itunes isn't recognizing my purchases at all, not just season passes. If I go to a page of a show where I buy episodes individually, it doesn't show which episodes I have previously bought like it used to.

  • Encoder opens and  project is not added to the render (bug with several plugins)

    if i apply Neat Video Plugin in After Effects
    and send to the renderer in the media encoder
    Encoder opens and the project is not added to the render
    if i remove this plugin in Ae
    and again send to render it all works!
    What's the problem?
    Last Ae cc 2014 and Encoder
    Maveriks 10.9.3

    Sorry, I didn't really hit the problem with this post.
    I had just downloaded 9.0.3.2 and was trying to check if some critical problems we had were indeed fixed in the patch. As I realized myself later, my assumptions were wrong (but not the final results, unfortunately).
    After another couple of days of debugging, I was able to identify the real problem, which I posted in BC4J: association accessor problem
    As you can notice from the other thread, the issue is not that the entity row is not added to the cache (this is false), but that a second use of the association accessor will not "see" the new row - took me some time to understand the "slight" difference ;)
    Maybe you could check that issue and suggest me a workaround...
    TIA,
    Adrian

  • HT4623 I've downloaded i0S7 and am not satisfied with the calendar application.  Is it possible to reset the I-phone to it's orignial confiuration?

    I've downloaded iOS 7.0.2 on my Iphone and am not satisfied with the calendar application.  Can I reset my Iphone to it's original settings ?

    Hickman
    What are you trying to do?   Here is a helpful article.
    http://www.macobserver.com/tmo/article/ios-7-making-calendar-more-useful?utm_sou rce=macobserver&utm_medium=rss&utm_campaign=rss_everything
    Cheers

  • Have set up icloud on my pc but the events form my ipad mini are not showing on the calendar

    have set up icloud on my pc but the events form my ipad mini are not showing on the calendar. How do I do this?

    Hi ailsafromgbr,
    Thanks for using Apple Support Communities.  This article has steps you can take to troubleshoot issues with iCloud calendars:
    iCloud: Troubleshooting iCloud Calendar
    http://support.apple.com/kb/ts3999
    Cheers,
    - Ari

  • Why are sent emails not stored in the Sent Items folder in iOS7

    Why are sent emails not stored in the Sent Items folder?

    Thanks, Matt.
    I'm now starting to notice the emails that don't come in order are all posted from sites that use multiple platforms to send the same message; email, Facebook, Twitter, etc. so maybe that has something to do with it. I'm thinking the hold up is possibly at their end.

  • Hello everyone, I have a problem when I sync my apple device. I plug it in and a message comes up saying, this device could not be synced because this computer is not authorized for the purchased items on this phone. I already tried to authorize again.

    Hello everyone, I have a problem when I sync my apple device. I plug it in and a message comes up saying, this device could not be synced because this computer is not authorized for the purchased items on this phone. I already tried to authorize again, after deautherizing it. HELP ME PLEASE

    Hi applerinneedforhelp,
    Thanks for visiting Apple Support Communities.
    If iTunes is asking you to authorize the computer, and you've already done so, the troubleshooting steps in this article can help:
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
    http://support.apple.com/kb/ts1389
    Regards,
    Jeremy

Maybe you are looking for