Used the wrong install disk and now it wont eject the disk

Alright I know that I'm an idiot but I made a boo boo.
I have a G4 powerbook (newer one with the superdrive) that needed a new hard drive. I changed the harddrive no problem but heres my problem:
I went to install the OS and I have a new MacBook, and I accidently put the disk for the MacBook in the PowerBook and now the Powerbook wont give it back! It doesnt have the little spot to stick a paperclip in and it gives you the cd back.
Obviously the computer cannot boot from the MacBook disk and I've tried EVERYTHING to get the disk to come out. But since the disk is mounted and is what the utilities are running off of it wont eject it.
I would open up my powerbook again and try to pry out the disk but i dont want to run the computer or the disk.
Any suggestion?
Thanks in advance.

"I can try this my only concern is that the disk utility is running from the boot disk and i have a feeling it wont eject the disk if the utility is running off the disk."
You may have a point there. That's why I recommended the Firewire, Target Disk Mode. I know it works. At least, that's the way I've always gotten out stuck disks. And in my case, most of the time, it's been when I've reformatted a drive and it has no startup volume or OS to startup from.
So, if you have a disc in there, it will not spit it out. (Not saying that other's suggestions won't work to do so).
Starting up in Target Disk Mode bypasses that function, booting up, so while it's connected to another Mac, it doesn't need the disc nor will it access it while on.
You might be able to do your own suggestion. But the external CD-ROM drive will have to be connected via FireWire in order for the Mac to recognize your installation disc as a startup volume. (Also, make sure installation disc is not a DVD as opposed to a CD... most installation discs in the latter G4 era were DVDs, if I'm correct-- especially Tiger).
In that case, when you startup, hold down the OPTION key so that you can choose which install disc to startup/boot from. Just make sure you choose the one that's in your external optical drive.
P.S. Did you HOLD DOWN the mouse button when starting up? You can't just click on it. Once you turn the Mac on, hold down the mouse button until the disc comes out, and don't let go.

Similar Messages

  • My mom typed in the wrong email addy and now her mail is locked.  It states that there is mail in her outbox but won't let me get to it.  any suggestions?  Thanks

    My Mom typed in the wrong email address and now her mail is locked. It states that it can't be sent because the server rejected one of the recipient's addresses. The message has been placed in your Outbox.  Now when I go to the outbox I can not access it.  It is like it's locked.  She has and IPad version 1.  Any help would be appreciated.

    This may be of help.
    http://apple-ipad-tablet-help.blogspot.com/2011/08/ipad-2-email-address-rejected -by-server.html
    If you can't use the mail app now - if it is frozen - quit the app and restart the iPad.
    Go to the home screen first by tapping the home button. Quit/close mail by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down onthe mail app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    If that doesnt help try resetting the iPad. Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • I turned off my computer while installing something and now I only get the start-up screen with the apple logo. How do I fix this?

    I turned off my computer while installing something and now I only get the start-up screen with the apple logo. How do I fix this?

    Reinstall OS X:
    Reinstall OS X without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.
    Reinstalling Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion and click on the Continue button.
    Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

  • TS4050 I typed the wrong apple ID and now I have no access to my ICloud. How can I change my apple ID on my Icloud?

    I typed the wrong apple ID and now I have no access to my ICloud. How can I change my apple ID on my Icloud?

    I have asked for your email address to be edited out. Posting your address in an open thread is a sure way to be bombarded by unwanted email, remember it will be here long after you have resolved your problem, for automated detection software to find.
    If you want people to contact you, enable others to see your email address in your profile.
    You should be able to change that address at My Apple ID

  • I connected my ipod before installing softwear and now it wont work

    i connected my ipod before installing softwear and now it wont work...like abosolutely nothing...its frozen

    First of all, try resetting the iPod. It may take several attempts and is best done connected power.
    Then download the iPod Updater, install this to your computer, restart the computer, run the Updater, then connect your iPod when prompted (not before), then follow the set up procedure.

  • Ive just updated my version of itunes and now it wont load the itunes store? Anyone know why? Worried about losing my library if i start trying to download again.

    Ive just updated my version of itunes and now it wont load the itunes store? Anyone know why? Worried about losing my library if i start trying to download again.

    Hey NJ85,
    Thanks for the question. If you are having issues connecting to the iTunes Store, this article may help:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    Thanks,
    Matt M.

  • I dropped my ipod 4 and the screen came off and now it wont turn back on.

    someone help! i cracked my ipod in the past and now i got a new screen. well i just dropped it and the screen came off and now it wont turn back on. it says that its on itunes so the device still works but the screen its self doesnt is there anyway anyone can help!

    Take it to somebody to get it fixed. However, it may not be cost effective to get it fixed.

  • The new itunes update will not install properly and now itunes wont work at all

    k, so I tried installing the new update for itunes and now it wont work at all. it says that the mobile device isnt installed. i have uninstalled and reinstalled itunes 4 times now.

    My issue is it wont even reinstall onto my computer
    Yes I'm aware of that. The procedures are also for trying in cases where iTunes can't be reinstalled due to a "Could not start Apple Mobile Device service" message.
    If you're getting a different error message relating to the Apple Mobile Device Service (or Apple Mobile Device Support) when you try to reinstall iTunes, post back to let us know what that error message says. (Precise text, please.)

  • I have just done the new itunes update and now it wont let me sync my phone ?

    Hi Guys,
    I have just done the new Itunes update and now when i plug my phone into the computer it dose not recongnise my phone through itunes and will not let me snyc, backup or update it. What did i do ? sorry what should i do ?

    Connect the iPod to your computer and look at the storage used by the various categories as shown in the colored bargarph in iTunes.
    Come back with the results.
    An "other" larger than about 1 1/2 GB indicates corrupted files.
    What is the Other on my iPhone and How to Remove It
    What is "Other" and What Can I Do About It?
    and as necessary:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync/delete all music and resync
    To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       

  • I just updated my i phone 5s to the most recent version and now it wont turn on?

    I just updated my i phone 5s to the most recent ios7.1.1 version and now it wont turn on or even get into i tunes. I dont know what to do now.

    If it's in recovery mode, the data is already gone. Why did you never back up your important data?

  • Hi I have used my macbook pro with miniport to HDM, and it was working fine.  Hadnt used it for a month and now when I connect the TV, the screen on the mac goes blue then back to the page but nothing comes up on the TV. Any ideas?

    Hi I have a year old Macbook pro.  I was using a miniport to connect it to the TV via HDM cable.   It was working fine but I have used it for a couple of months kept it in a drawer and now it doesnt work.  When connected to the TV the screen on the mac goes blue as though there is some signal then back to original screen but the TV doesnt show what's on the laptop.  Please any suggestions, thanks??

    Hello nothingissecret
    Check out the article below for troubleshooting steps to resolve the issue. One would be to try a different cable or adapter to test with the television.
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • I accidentaly entered the wrong birth year and now can't set up sync, what can I do to correct this?

    when I was setting up my sync account, I accidentally selected the wrong year and the system thinks I'm under 13. I am now locked out of having a sync account.
    What can I do to correct the date or start over?

    Did you try to close and restart Firefox?
    If that doesn't help then try to reset the services.sync prefs that show user set (bold) on the <b>about:config</b> page via the right-click context menu to the default value.
    *http://kb.mozillazine.org/about:config
    *http://kb.mozillazine.org/Resetting_preferences

  • My little sister kept entering the wrong pass code and now its disabled, and it says"connect to itunes"  but i don't know what  to do? Help!

    My little sister kept typing in the wrong pass code for my ipod touch and now its disabled, and says connect to itunes but i can't unless i'm on my ipod. so please comment helpful solutions!!!!

    http://support.apple.com/kb/ht1212
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • Installed Maverick and now iPhoto wont open, help

    I've just installed Maverick from using Snow Leopard and now iPhoto won't open and the message"You can’t open the application “iPhoto” because it is not supported on this type of Mac." appears. Since I have hundreds of photos in iPhoto and iPhoto was supported on this mac previously how can I access them?

    Since my last post I found some instructions courtesy of Old Toad.   They might work for you.
    Launch iPhoto with the Command+Option keys held down and rebuild the library if the photos are missing.
    Run Option #4, Rebuild Database, followed by Option #1 if needed.

  • HT6114 I installed Mavericks and now safari wont work.  Help!

    I gleefully installed Mavericks thinking I was doing the right thing.  After an hour of figuring out that I had internet connectivity but Safari wasnt working I spent several more hours trying to figure out what to do .  I did not back up the system before I upgraded (brillinat decision on my part) but now I am stuck.  Do I just use Firefox or chrome which dont seeem to have problems and wait until Apple comes out with a fix or???? I thought getting an Apple was supposed to avoid this kind of issue.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Maybe you are looking for

  • Heading in the report as Vendor name

    Hi SDN, I am using " Email(Bursting)" feature to burst reports by Vendor.Vendor  is the Characteristic value by which we are bursting. Also Email address is attribute of Vendor so we are sending the reports to their email addresses. The data is broke

  • Nokia Lumia 810 and 820 launch in India

    Can you tell me when Nokia Lumia 810 and/or 820 will be launched in India. I am really in need to change my existing mobile and just waiting for these two. Thanks! Solved! Go to Solution.

  • Speed up connection

    I have a Novell Netware 4.11 server thats has 1024 MB of Ram and a 2.8 gHZ Processor, w/ 2 10/100 Network cards w/ Load Balancing on. Now how can I get the connection between a client and the server to transfer files faster than 500 kB/Sec. I have a

  • How can I make the tabs go away? Every time I reopen, they are back!

    OK--Right now, the tabs are stuck from the day I set up my new iMac. One is stuck on Google search my home page opener, and it always says what the **** because my daughter typed that when the iMac insisted it couldn't find the wireless keyboard afte

  • Credit Memo to PO (Purchase Order)

    HI i have one issue now that is related to PO.i didnot work on it till now.plz help me on this. I need to post a credit memo to PO 45_105 for 92.28. When I try I am getting the attached error. Why can't I post the credit memo? It's saying that the re