Used to use InterAKT menus - Looking for good menu creator

Looking for a way to create attractive menus in Dreamweaver
CS3. My InterAKT menu creator is not compatible with CS3, and I
need to find a way to create attractive looking menus easily. Any
suggestions? I am on an apple computer.
The Spry menu bar in CS3 looks very basic, and the
documentation seems lacking. Is there a good way to create great
menus in CS3, or did I have to get a plug-in? And is so, which one?
Thanks!

The following have some great menu creation menus. I
generally use p7 menu's
myself.
http://www.projectseven.com/index.htm
http://www.pluginlab.com/dreamweaver-extensions
k

Similar Messages

I have IMAC and use Aperture and I am looking for a good App to turn a photograph into a painting look

I have an IMAC and use Aperture and I am looking for a App that will allow me to have one of my photos look like a painting - any suggestions? It is a gift for my brother

I like photoshop elements.
http://www.photoshopelementsuser.com/blog/from-photograph-to-painting/
You can also do something like this:
http://www.luminous-landscape.com/tutorials/new_page_9.shtml

HT4972 My ipad 1 is stuck on IOS 4 as the IOS 5 update instructions do not work. When I use itunes update the software looks for an update file and the apple site doesn't have one!

My ipad 1 is stuck on IOS 4 as these IOS 5 update instructions do not work. When I use itunes update the software looks for an IOS 5 software update file and the apple site doesn't seem have one anywhere!

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
 Cheers, Tom

TS3152 Im using 10.7.4 and looking for a way to change the streaming port on quicktime x

Im using 10.7.4 and looking for a way to change the streaming port on quicktime x
used to be able to do via system preferences > quick time > advanced
But cant find these settings anymore
Thanks
Pavi

Click on the pull down window next to From: and you should be able to select the individual account you want to send from. The account that you want to send from must be an Enabled account in the Account Preferences of Mail.

Looking for good orchestra plugins

Hi,
I am looking for good classical orchestra plugins (violins cellos etc...)
What are your suggestions ?
thanks

As soon as iS sees this, he'll chime in with his
faves...;)
My ears were burning.
I use bits and pieces from many different libraries. For me, there's no one library that has all the right textures, articulations, etc. for any one instrument.
I recently purchased the Kirk Hunter EXS24 library. Most of the brass, strings, and woodwinds are superb. The caveat here is that almost all samples were recorded in some kind of hall or soundstage, so as with other libraries that were sampled with ambience, it can sometimes be problematic if you're going after a dryer sound. Depending on the sound, careful tweaking of the release time can minimize that effect.
So yes, I endorse Kirk Hunter. Bang-for-buck quotient is great ($325).
GPO -- I use their woodwinds and harp, the occasional solo string sound, percussion (the xylophone and celeste are wonderful). But the strings are pathetic and the brass poor. Still, for $250 it's an astounding deal, and worth it for the woodwinds/harp alone. It's paid for itself 50x over.
A favorite for strings are Sonic Implants. My copy went through a Gigasampler -->EXS conversion and I love them to death.
EWQLSO are not a fave. I've heard good things about Gold though.
Vienna... I've never been impressed with any of their demos. Well crafted but flat and lifeless sounding. I think the fault is with the demos and not the actual samples. Anyway, a friend recently realized a part for me using some of their specialty brass sounds and it was exactly what the doctor ordered! One day I'll invest in VSL and add it to the arsenal.

I am looking for good pdf conversion program like omni pro 18

i am looking for good pdf conversion software, like omnipage pro 18 by nuance, it is only supported by windows, what is good?

What are you trying to convert the pdf to (MS word, text, what)?
Here's one for word: PDF Converter
Possibly another way for word: How to Convert PDF to Word Document on a Mac

Looking for good JSP editors??

Hi,
I am new to JSP but very old to ASP. I am looking for good JSP editors if there are any for free to dl.
Do we have any JSP editors...like in Microsoft which gives you dropdown list of parameters and properties.methods... ???
Thanks,
Kavans.

Sounds like your looking for a good IDE. As far as free ones
go, netbeans is as good as any. Comes with a lot of nice
features.. such as code completion, and has the latest version
of tomcat integrated.

Looking for good easy to use inexpensive tuner

Hi,
I am looking for a good, easy to use, inexpensive tuner. Not one you use in a rack or on a pedal, but one you use on the computer. I looked and there are a ton out there so I figured I would look for recommendations here.
I do not like the way GBs works. It fluctuates too much as the note decays and drives me nuts. I want a simple one, that works great. (If it has a feature that helps in tuning a 12 string, than thats a plus, but not a deal breaker). Simple and accurate is most important.
Lastly I noticed some they sell are AU and some are stand alone. Is one better than the other?
Thanks,
Paul

Strangedogs,
Thanks for the link but if you read the review of it on the site, it is terrible. The users on VT hated it. It got 1 star out of 5. I was looking for a recommendation of one that someone has actually "used" themselves and likes it from experience using it.
There was a link that someone posted there for a free tuner from emagic that they said is great, but all the links I found with google run to a dead end unfortunately.
Paul
BTW: boy do those 12 strings take forever to tune. I was jamming with a friend over new years weekend and it took him forever to tune up, (and he has an excellent ear).

Looking for good book on using DSLR for shooting video

I recently purchased a new Canon t3i DSLR. I've been watching videos on YouTube and it seems like this camera is capable of taking great HD video. My test videos look nothing like these examples. I am looking for a good resource that will teach me what settings to use, especially manual settings for shooting videos. Of course it would be great to find something specific to my camera, but I'm sure that the techniques will apply to most DSLRs.
Thanks

This website is very useful
http://nofilmschool.com/

Looking for good canned demo of WLS 5.1 using SQL

I am looking for a good canned demo that i can install on a WLS 5.1 machine that is similiar to the PetStore demo on the WLS 6.0B2 download... something that can be setup and shown on a moments notice...
thanks

Hi,I am using wls 5.1 and also use it as an app server and webserver.I need to set the mime type for ms-excel for it to display excel sheets.I have modified the properties as follows.
weblogic.httpd.mimetype.application/vnd.ms-excel=xls,xlw,xla,xlc,xlm,xlt
weblogic.httpd.mimetype.application/vnd.x-excel=xls,xlc,xll,xlm,xlw
I am unable to read the charecters which appear as junk .Also in the log i see the following
Tue Mar 06 15:19:12 PST 2001:<W> <WebLogicServer> Found undeclared property: web
logic.httpd.mimetype.application/vnd.ms-excel
Tue Mar 06 15:19:12 PST 2001:<W> <WebLogicServer> Found undeclared property: web
logic.httpd.mimetype.application/vnd.x-excel
Any clues as to what i may be doing wrong?
Thx,
vamsi

How I want to use iCloud + my PC, help/look for answers here

Howdy all, I will be updating this if i manage to fix my problems
So I love my iPad, and I will soon get an iphone. But regardless of those purchases, I still have a PC and I will continue using it.
But I love my iPad as my main personal organizer, (contacts, calendar, etc). So I want to be able to use my iPad to update stuff and have my contacts, calendar, and purchases apply to my PC as well as my future iPhone. Since apple devices sync my easily, I decided to make this discussion to help others as well as my self set up apple to windows related things.
And please, back up your device before anything, just incase.
I am using:
Windows 7 home edition 64bit
iTunes 10
iPad IOS 5
Outlook 2010
I don't think I have to list anything else, but if I do, just ask!
So what I am trying to do -
PLEASE TELL ME IF I AM WRONG, Thats the point me doing this
Apps - This part is DONE
http://support.apple.com/kb/PH1620?viewlocale=en_US
So, you have to turn the MUSIC, APPs, BOOKS on through iTunes(PC) as well as your devices. So now, buying apps, as long as you devices/PC has your account logged in, it should apply my purchase to all of them at once.
Book Marks- This part is DONE
I like to use chrome. But to sync them together, I exported all of my Chrome bookmarks, and shoved it into Safari, it seemed easier than using IE.
I then synced my ipad's book marks into Safari. Now Safari, on my PC, contains ALL of my iPad and Chrome book marks. I then exported the bookmarks from safari and imported it into Chrome. A bit longer and annoying, but it worked.
So from now on, all Chrome bookmarks on my PC will have to be added to Safari. And my iPad bookmarks, will require me to carry it from Safari to Chrome.
Photos - This part is DONE
So, in my own opinion, Photo stream is stupid. All this is, is Dropbox for pictures.
On a PC, after setting it up, it will give you a Photo Stream Folder. ANY pictures you put into Photo Stream Folder will be on photo stream and sync to all of your devices that have it turned on. But, in order to KEEP this picture, you must save each one or else it will auto delete in 30 days.
But, any photo that you take SHOULD automatically download into your PC. Which will also require you to save the photos into a different folder.
My boss at work figured this part out. IN ORDER TO ERASE photos off of photo stream, you will have to reset photo stream, which will kill the cloud distrubution of the pictures to each device, and erase those pictures on the cloud. Then you have to delete it off each device.
We believe that apple will change this. I mean, its kind of pointless if you can erase the pictures.
This part is where I had to use Outlook 2010.
Please note, This is a brand new outlook, I do not care about anything previously inside and there is nothing for me to erase or lose
eMails - This part is DONE
So the point of this part is to sync your iPad mails with your Outlook 2010. I don't use this, because I still prefer to go to each of my 3 individual email accounts to send mail. If I were out and about, I would be accessing each email through the website or my iPad, so I do not see the point in setting up the email sync.
But in order to use eMail, contact, calendar sync with Outlook, I had to make a default account. I HAVE NO CLUE what that means, but the error was this
"Setup can not continue becuase outlook isnt configured to have a defualt profile. Check your outlook settings and try again."
So find the settings a set a default account. IF you wanted to set the account to your @me.com account, then you will have to connect that email to outlook. But, it WONT WORK! I used these settings
p99-imap.mail.me.com > incoming
p99-smtp.mail.me.com > outgoing
check remember password and SPA
then go to "more settings" > "Advanced" tab and enter
For IMAP Port :"993" or just choose SSL from the encrytion dropdown
For SMTP Port : "587" and choose Auto from the encrytion dropdown. (do not choose SSL)
then goto outgoing server tab
check first box ...SMTP
Provided by https://discussions.apple.com/message/16351758#16351758
Calendar - This part is PARTIALLY DONE
My original Calendar was on Gmail, I synced my calendar from my gmail to my iPad. But with the new iCloud, I want it to all be on the cloud. I think I can sync the iCloud's calendar into outlook, but I cannot push my calendar from Outlook into iCloud.
So ON my iPad, I did a list view, and clicked on each event (thank god I only had 6 months worth of stuff, and changed it from my gmail calendar to save onto my ipad. So then since the events are now saved onto my iPad, I pushed that into the iCloud.
Now all that is left to do is to PUSH my iCloud Calendar into my Outlook. So then when I update stuff, it will show up on my PC.
But with the iCloud Control Panel, I cannot sync my Calendar. I keep getting this error
"Setup can not continue becuase outlook isnt configured to have a defualt profile. Check your outlook settings and try again."
I have no clue what to do
Contacts - This part is PARTIALLY DONE
I am still working with this, but that error like the one above is still there as well.
But with the iCloud Control Panel, I cannot sync my Calendar. I keep getting this error
"Setup can not continue becuase outlook isnt configured to have a defualt profile. Check your outlook settings and try again."

@Naiks, having suffered through unsuccessful synching attempts for Calendar and Contacts myself, l would suggest you try the following:
UNINSTALL iCloud control panel from your PC. Seems silly, but do it.
Go into Outlook, and look at the very top menu. Click FILE, then ACCOUNT SETTINGS, then click the popup box.
You will see a list of all your email accounts. Make sure that ONE of them has a checkmark against it. If not, select the account your want as your default, and click "set as default.
Exit out of Outlook and reboot your machine.
Now reinstall iCloud, check CALENDAR and CONTACTS, and do as instructed when prompted.
Reboot for good luck and now launch OUTLOOK. All that remains is to locate your iCloud Contacts and Calendar files, and make them your default.
IMPORTANT: Don't panic if you can't find your contacts -- they're there. Click CONTACTS and you'll see you have several available contact files. Locate the one label "iCloud" in grey type. Right-click on it, select PROPERTIES, then click the Outlook Address Book tab. Check the box that says something like "Make this my default Outlook Address Book." Keep clicking "apply" and "okay" until you've exited out of the dialog box maze.
You may have to do something similar with your Calendar files. I dd not, but if you need to, do it.
Everything should now sync pretty seamlessly.
I didn't have the exact same problem as you, but my dilemma was close enough. Good luck!
Arthur P. Johnson

Are you using After Effects and are looking for plug-ins?

AV3software.com has all the plug-ing you are looking for, all centralized in one website all available via download at a very attractive price.
Check it out www.av3software.com

Hi Michael,
That's not really the right forum for that, Adobe as an extensive list of those plug-ins on their own web sites, here's the link:
http://www.adobe.com/products/plugins/aftereffects/main.html
Best,
PJ

Looking for Good Article/Explanation on Timezones

Hi,
I'm looking for answers about timezones and if anyone could point me to a really good artilce I'd appreciate it. Here's the type of thing I'm looking for...
I'm writing an application that creates records in a file. The records are timestamped as to their creation. The catch is that the timestamp may not be the default timezone depending on the user's preference. I know the user's UTC offset and whether they use daylight saving time. The problem comes in when trying to figure out which timezone id to use to create the new timezone and set it in the calendar object. For example, if I know that the GMT offset is -7*60*60*1000, I get back 7 possible ids. I don't know anything about the rules for daylight saving time for the user, only if they use it or not. How do I know which id to choose? The users can be from anywhere in the world.
Thanks for any help.

Yes, I'd thought about just having the user set their
timezone (similar to the forum Settings). However,
even this forum settings causes some confusion.
There's two options for a number of timezones. What
differentiates them? The daylight saving rules are
important to know and the list of timezones doesn't
indicate this in any way. This list doesn't show all
available timezones either (as previously mentionted,
there's seven timezones for GMT -0700).Then you would have to do a better job than Sun did, wouldn't you? After all if you are going to be interpreting the answer you get, you had better ask a clear question. If you want to know the list of timezones actually supported by Java, then examine the source code for the TimeZone class. You can also search Google for "time zones" for links that will keep you busy for weeks learning the arcana of time zones around the world.

Looking for good headphones...

OK, I'm looking for a new pair of good headphones. For a few years, I've used Sony's. I like them, but I have one problem: durability. All of them have gone dead in a year or two. To be honest, I may be considered to be abusing them - They've all been earbuds, and I have a tendency to just dump them in my pocket. I bought a pair of $50 ones at the store about six months ago, and they work fine, but I've just noticed that the wire is exposed in one area, which generally means that they're gonna die soon. A case came with them, that was good, but it broke after a month or so.
I guess what I'm looking for is this:
- A pair of earbuds
- Good sound quality (doesn't have to be noise reduction, in fact, I might prefer they weren't, because I generally need to be able to hear what's going on around me)
- durability
- different size 'buds' (My ears are pretty small; the normal ones that came with the iPod were too big, they won't stay in, and all other one-size-fits-all type buds pose the same problem)
- $100 or less
- a durable, easy to use case (that I won't just ditch because there's too much work getting them in and out)
I was looking around and found that I really like the Panasonic RP-HJE70-S, they're around $100 and come with a case. They seem to be good, and the few reviews I've found like them. But they're fairly new, and there isn't much word out there yet. I also wanted to get some opinions first.
Thanks.

Hi,
I splurged recently on a pair of Audio Technica ATH M50's which were very expensive.
They sound wonderful and are 8 out of 10 comfortable when using them for hours. They're really good for tracking but I have found them to be highly inaccurate/coloured for mixing.
I don't know if this is important to you, but I've been unpleasantly surprised that most headphones seem to have the cable hard wired to the enclosure.
My fantastic Beyer Dynamic DT 150's (which are now 20 years old but not so good for tracking or mixing) have a hard plastic tab at the end of the cable that plugs into the headphones, and this tab has several, 'male' D.I.N. like pins (except in a rectangular formation) which plug into their female counterparts in the enclosure. This means that if the cable ever breaks (which, ironically, it hasn't because it is very durable) you can just buy another one and plug it in.
I wonder if there are other elements of design that are important to you or others.
Let us know what you choose, and you might want to check out the other sites too, homerecording.com, macrumors.com, audiorecording - I'm sure you're familiar with a lot of these.
Good luck
Message was edited by: drutgat

Looking for good first example for RSS

Hello,
I am looking for a good code example which will guide me how to use RSS at the portal. Can anyone please direct me to such example?

Hi Roy,
    I am posting a xslt that filters the news by searching for any news that has "Troops" and "Pope" in the title of the news. I can send you the complete par if you email me your address at [email protected] You owe me lunch buddy. :). The following xslt is for http://rss.news.yahoo.com/rss/world feed.
[code]<?xml version="1.0" encoding="ISO-8859-1"?>
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
<xsl:output method="xml" omit-xml-declaration="yes" indent="yes"/>
<xsl:template match="/rss/channel">
<a class="urLnk"><xsl:attribute name="href"><xsl:value-of select="link"/></xsl:attribute><xsl:value-of select="title"/></a>
<xsl:for-each select="item">
<xsl:variable name="titlestring"><xsl:value-of select="title"></xsl:value-of></xsl:variable>
<xsl:variable name="pope">Pope</xsl:variable>
<xsl:variable name="troops">Troops</xsl:variable>
<xsl:if test="contains($titlestring,$pope) or contains($titlestring,$troops)">
<table>
    <tr>
         <td class="urTxtStd">
              <a class="urLnk"><xsl:attribute name="href"><xsl:value-of select="link"/></xsl:attribute><xsl:value-of select="title"/></a>
         </td>
    </tr>
    <tr>
         <td class="urTxtStd">
             <xsl:value-of select="description"/>
         </td>
    </tr>
</table>
</xsl:if>
</xsl:for-each>
</xsl:template>
</xsl:stylesheet>[/code]
Message was edited by: Prakash Singh

Used to use InterAKT menus - Looking for good menu creator

Similar Messages

Maybe you are looking for