Useing EasyCap for Wireless Webcam

Is it possible to recognize EasyCap as a device that could take pictures and videos for IMAQ vision. If so How?
here is the link to EasyCap http://www.dealextreme.com/p/easycap-usb-video-capture-adapter-5707

Hi Ken101,
The USB device needs to be DirectShow compatible in order to be supported by our Vision drivers. I would verify that it is before moving forward with the application. Take a look at this tutorial that explains a little bit more how our vision drivers interface with USB devices.
Paul M
National Instruments | Applications Engineer | www.ni.com/support

Similar Messages

I have an IMAC that runs OS 10.6.7. I use Netgear for wireless. My computer keeps losing the network, so I can't use wireless.

I have an IMAC that runs OX 10.6.7. I use NEtgear for wireless. I have a laptop and Ipod that I use on the wireless. Recently, my desktop computer shows that it is searching for the wireless system (on the router). I contacted Netgear. They talked me into buying another router and their technical contract. Nothing is working. I can plug my 5200 modem directly up to my desktop , and the network is fine, but the wireless, of course, is not plugged in. When I go to connect the wireless, it doesn't work. This is not a computer program per se, nor is it a router program because sometimes it will work. It seems to me that the computer and router are not working together to hold the settings.
I have attempted to download the latest software for my computer, i.e., Imac graphics fireware. Each time I try, it says that the extensions are not valid for my computer.
Any suggestions?
Thanks, Vicki

Imac graphics fireware.
Did you mean to say firmware? You should only install firmware updates when offered to you via Software Update; other than that, whatever is offered is not appropriate for your model.
As for your Netgear router - I have a Netgear and set it up manually on their web interface setup site (the address should be in your manual). Did you call your ISP so they will recognize that there is a router involved? Sometimes my iMac also does not want to communicate with the router; however, my Macbook and printer have no problem. I solved the problem by connecting things this way:
cable from wall to modem > cable from modem to router > cable from router to iMac. The other things are wireless.

How to use AE for wireless printing with Ethernet Printer?

Hi all,
I have been using my AE connected to a printer via USB for printing but have now replaced my printer with another model that only has Ethernet connections.
Can someone please explain how to set up the AE so that I can print? I can get so far but seem to be doing something wrong somewhere. Here's my setup:
Mix of Macs and PC's using Airport Time Capsule for wireless network. Currently setup as 'Create a Wireless Network'
1 x b/g Airport Express - now with Ethernet connection between AE and Printer. Currently connected as 'Join a Wireless Network'
Via 'Add Printer' I have selected 'Internet Printing Protocol - IPP' as the Protocol and added the IP address of the Airport Express '10.0.1.10' as the Address. This seems to connect OK but all I get is printer paused.
Any idea where I am going wrong please?
Many thanks, Mike

Sorry you are having difficulties.
Suggest that you first get the printer working with your AirPort Extreme in case the configuration on the Express may not be quite right.
I'm not familiar with the Epson products, but I do use an HP ethernet all-in-one device.
The basic "must do's" on the device include entering the printers MAC address and assigning a fixed IP address that the printer will always will receive using a DHCP Reservation on the AirPort Extreme. My all-in-one gets 10.0.1.25 It sounds like you may have done this.
After installing the printer software from the disc, you go into the Mac's System Preferencesj > Print and Fax and click the small + (plus) button at the bottom of the printer list. The HP printer appeared immediately as an available printer, so click it to highlight it and then click Add at the lower right. It's been flawless since it was installed about 3 months ago.
You'll need to Add the device for each Mac computer on the network. I don't use PC's but imagine that Add Printer or Add New Device would be the way to go here.
Sometimes it helps to call the manufacturer and endure the hold for 15-20 minutes waiting for the manufacturer's tech support people.

Proper install for TC to U-verse 2wire to use airport for wireless in home.

I am using the U-verse 2 wire to connect to internet wireless, and ethernet, to Imac. Want to change to the TC for wireless in hopes it might be faster. How do I do that?

+Want to change to the TC for wireless in hopes it might be faster.+
If you are looking for a faster internet connection, your 2Wire is already much faster than your internet service, so adding an even faster TC will not provide any improvements as far as your internet connection is concerned.
If you are backing up to the TC using wireless, you will gain some improvement in this process.
You will need to connect the TC to the 2Wire gateway using an ethernet cable. Are you able to meet these requirements?
In addition, you'll need a second ethernet cable for configuration purposes, which will be disconnected after the TC is configured.
Post back when you are ready.

Using HH4 for Wireless

Hey All,
I will be testing a DrayTek Vigor2860 for work this week.
Because it is not the 2860n it does not have wireless.
Is there anyway to use the DrayTek as Modem and cabled connections and get it connected to the HH4 for the wireless?
Thanks in advance.
Matt

Hi, My name is Eric Moyers. I am a Network Support Engineer in the Cisco Small Business Support Center. Thank you for using the Cisco Community Post Forums.
It is my understanding that from your description you are wanting to use security mode WPA2-Personal but still want to access your radius server for MAC Address connection control.
If I have a radius server already setup, why not use it for the security mode as well?
I have not personally set this exact scenario up, but unless the WAP is using the Radius for its security, instead of WPA2 - Personal, it will not be able to use it for the Connection Control. As a test if you configure it to use Radius and post the results?
Thanks
Eric Moyers .:|:.:|:.
Cisco Small Business US STAC Advanced Support Engineer
Wireless Subject Matter Expert
CCNA, CCNA-Wireless
866-606-1866
Mon - Fri 09:30 - 18:30 (UTC - 05:00)
*Please rate the Post so other will know when an answer has been found.

Want to use ipad for wireless presentations

want to use ipad2 for wirelee presentation on a 16:9 screen but if using apple tv the icon screen does not stretch to fill while video still fills the screen. can i get both to fill the screen? Or is there a way of using a 2nd ipad as a mirror and cable connecting it ?

I just downloaded Pocket Light Meter. After I turn on the additional settings, I can see foot candles , however when I compare it to my actual light meter to check the validity of the Pocket Light Meter, they are way off. Any idea how to calibrate it or to check if possibly I am doing something wrong??

Cannot use DSL for wireless & phone simultaneously with Airport Express

Hello, I've just moved and switched to DSL from cable modem.
SBC DSL
One phone jack with the supplied filter on it allowing connection to the phone and supplied wired router
They provided a CD that configured the connection for me. In their ethernet connection it is not PPOE. Just DHCP. When I connect the laptop directly to the router via ethernet, I am able to surf and talk on the phone. When i connect the router to the Airport express and connect wirelessly, I can use either the phone or the internet. When I make a phone call the wireless drops.
Does anyone have any idea as to why this happens?
Thanks,
Neobe

It's a 2.4 GHz phone
This is likely your problem.
2.4GHz phones are notorious for interfering with WiFi networks, as they share the same frequency range.
This is a very common problem.
I would suggest switching to a 900Mhz, or a 5.8GHz cordless phone.

Use TC for Wireless Printing and Backups Only on Existing Wireless Network

I am fairly clueless about this whole issue. I set up my current Belkin wireless router several years ago, and haven't had to fool with it once. I don't want to have to touch it--if it ain't broke............ However, I would like to use my Time Capsule I just purchased to backup via Time Machine wirelessly and attach a USB printer and print wirelessly. So the TC will not be used for internet, just want a separate wireless point for printing and backing up. Is this possible? I am not sure which choice to choose in Airport utility. I tried a couple different ways, and it didn't work. Can't honestly tell you what I tried, am a bit confused at this point!

If you have not already done so, I suggest that your start over on the AirPort Expess "from scratch" by performing a Factory Default Reset and then attempt to configure it to join the network again.
Resetting an AirPort Base Station or Time Capsule FAQ
If you have an older Express, make sure that you are not trying to configure it to connect to the 5 GHz network, as it is unable to do so.
Assuming that the name of the wireless network, wireless security setting and password on the Express match up with the AirPort Extreme, the Express should "join" the network if it is working correctly.
If you are still having problems, all that you really can do is try the default reset a few more times. If still no luck, the Express....which is at least 5-6 years old or older, may likely need to be replaced with a new model.

Using Router for wireless dial-up connection

Can anyone tell me if I can use a router to set up a wireless network when I only have a dial-up internet connection available?
I have a desktop computer that seems not to have a wireless network card, so I guess I have to have that first. Then, do I use a Router or an Access Point? I have read many posts on the subject that are quite old so don't know what to use.
Any suggestions as to which models to use would be very helpful. I have no idea what I'm doing!

Then only way you can do this is to set up ICS (internet connection sharing) on the PC that is going to connect to the dail up and install a router or AP behind that from that PC's neywork card. Then the other PC's can connect to the router/AP then to the gateway (PC running ICS).
However, your connection speed would still be very slow. I would recomend just calling your local ISP and look into a broadband (DSL/Cable) connection and connect a router (wireless or wired) to the modem (DSL or Cable) your ISP gives you. That would save the head ache would would get configuring ICS. Here is a link to use as a reference on setting that up.
setting up a wired/wireless network
Richard Aichner (Ikester)

How to use AX1 for wireless audio and Time Capsule simultaneously?

I am trying AirFoil to Stream Pandora (Safari) to an amplifier and speakers in the next room connected to an older Airport Express.
I can play iTunes 11.0.1 (on a MacMini 2.26 GHz running 10.6.8) to this older Airport Express 802.11g (before N came out - Is this called AX1st?) with the audio out the Express connected to my amplifier and speakers and wirelessly play my music. To do this I have to choose the Airport Express as my network device which means I loose my Time Capsule, which is the device with my internet connection.
Can you tell me how to stay on the internet with Time Capsule and stream to this Airport Express?
If I try to extend to this Airport Express I get an error message: "The Network You Selected cannot be extended." (I don't know if that is a "g" "n" thing or what?)
Do I need a newer Airport Express, or a Netgear or how to get Pandora to an amplifier in a different room, wirelessly? Then the question will be, how to do this to three different amplifiers in three different rooms.

How do I
Make your Express 'join' your Time Capsule's WiFi network in AirPort Utility. This will work wirelessly however your Express will not function as an extender in this mode.
I'm Using Airport Utiity 5.6.1
In AU in "Aiport / WIreless tab" I hoped it would be as simple as the word 'Join' showing in the Wireless Mode drop down. But it does not.

How to setup Time Capsule for wireless backup only

I have a new Time Capsule that I want to set up for wireless backups of both my Macbook Air (with Time Machine) and a Windows Vista laptop. I have an existing home wireless network with my Att/Uverse tv and internet service. I do not want to disturb that network/internet setup.
How do I set up the time capsule to use it for wireless backup only? When I start the Airport utility setup, the first thing it asks is do I want to 1) set up new network, 2) replace existing router, or 3) join existing network.

Thanks. That got me the green light and a message that everything was set up properly. It started it's first Time Machine backup and everything looked good for a while. But now I have a new problem.
The backup failed twice. The first time it had a message that it could no longer find the time capsule, so I had to reset it and go thru the setup procedures again. Started backup again overnight, and this morning it tells me that it failed again. But this time I still have my green light, and the message is "a network problem may have interfered with the backup.
I don't know what else to do with the setup to get it to work. Right now it has started backing up again on its own, so I'll leave it going one more time. (I should tell you that all of this is occurring on my Mac. I have not even started setting it up on the Vista machine. I want to make sure it works on the Mac first). Any advice from anyone who had the same problems with setup would be appreciated.

Wireless WebCam for a Robotic Project

I am interested in your Wireless WebCam for a robotic project being built by my students. The robots will be using the webcam to image GE’s digital hologram (http://ge.ecomagination.com/smartgrid/#/augmented_reality). Does your wireless webcam look a like a normal webcam to the PC?

Thank you for saving me the time required to buy it and then return it. If anyone has a solution that will work with Flash Video (mimic a webcam). Please let me know.

Wireless Webcam for Surveillance?

Hello,
I am trying to find some recommendations for a good Wireless Webcam that I can use for surveillance in my home. I'd like to be able to move it around, and have it wirelessly take photos and transfer them to my computer / upload them to the web. Obviously I can't use my built-in iSight for this, so I'm looking for a wireless one that is compatible with Macs.
Do you have any recommendations?

Welcome to Apple Discussions, Lemonjenny
Will any of these work for you?
EZ Jim
PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.2) External iSight

I have a Westell 6100G modem. I want to set up Airport Express for wireless. Can someone tell me how to do it step by step. I'm using an HP with Windows Vista. I'm a tech idiot.

Just got Airport Express to save on GBs of data. I have already a Westell 6100G which is for use as Internet Broadband, via Verizon. How do I set up the Airport Express with this Westell. Do I even still need the Westell, or do I need to also buy a wireless router? I'm a tech idiot and this is driving me nuts.

The Westell 6100G is a combination modem and router or gateway device. The AirPort Express is a wireless router.
Since the Express does not have a built-in modem, you will still need your Westell gateway in order to access the Internet.
Which exact model of AirPort Express do you have. It will be written (in very hard to read type on a label on one of the AirPort's sides). It should look something like: A1392. It may also state a Order#. In that case it would look something like: MC414LL/A
Regardless of which model you have, the basic network configuration would be that you would connect an Ethernet cable between the Westell's Ethernet port and the WAN (circle of dots) port on the Express. (Note: If you have an earlier model of the Express, you would connect the cable to the only Ethernet port on the Express.)
The good news is that you will not have to make any configuration changes to the Westell. We should be able to use it as configured.
What we are going to start with is getting a basic Wi-Fi network that should provide your computer with wireless access to the Internet. Once verified as working, we can fine-tune this network to include wireless security and any other goals that you may have.
Ready to start?
I would recommend that you do the following as a minimum:
Power-down the Westell and computer(s).
While all of the devices are powered-down, perform a "factory default" reset on the AirPort Express base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
Once the reset has completed, remove the AirPort Express from power.
Connect an Ethernet cable between the Westell and the AirPort Express.
Power-up the Westell; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

How to restart base station from airport utility? I used to be able to do it remotely I currently use a Mac Pro 10.8.4 and have a time machine for wireless 6.3 (630.34). Sometimes I cannot connect to the internet and use network preferences to diagnose t

How to restart base station from airport utility? I used to be able to do it remotely
I currently use a Mac Pro 10.8.4 and have a time machine for wireless 6.3 (630.34). Sometimes I cannot connect to the internet and use network preferences to diagnose the issue. This results in being told to restart the wireless. The airport utility includes the drop down option of restarting but is not clickable so I can't choose it.
With my prior macbook and same time capsule, etc if i had problems connecting to the internet I would run network diagnostics to help out. This included clicking on the airport utility ---> base station --> restart. This worked most of the time.
Bottom line, is there something I am missing in not being able to restart the wi-fi remotely? ]
Thanks in advance

You are likely forgetting a step.
Open AirPort Utility
Click on the Time Capsule icon
Click Edit in the small window that appears
Now click the Base Station menu.....top of the screen....not the Base Station "tab" in the center of the screen
Click Restart

Useing EasyCap for Wireless Webcam

Similar Messages

Maybe you are looking for