Useing usb from monitor on mdd g4

hi my mdd g4 has usb 1 and the cinema monitors have usb 2. does that mean the usb conectors on a apple monitor wont work. thank wil

They'll work, but at USB-1 speed.

Similar Messages

  • Can't print through Time Capsule, but I can using USB to my MacBook

    I posted something similar in the Time Capsule forum, but thought I'd try here too. I just got a new Canon MF4690, and I can print to it using USB from my MacBook just fine. Not so when printing wirelessly through Time Capsule. I can see the printer, but the job stops every time. When I set up the printer the driver is "generic" using the Time Capsule connection, but has the specific model number when I add the printer using USB.
    I can see the printer in the Printer preference pane, and in Airport Utility, but when I print a job, under "status", it says "stopped". I'm baffled that this is happening! I hope someone can help.

    Joe P. wrote:
    Would I connect my Canon to the TC and set up the printer? Do I choose IP, AppleTalk or Other?
    If the TC is providing the wireless access and is your only Ethernet hub, then yes you would connect directly to it. If you have another Ethernet hub connected to the TC, then you could connect the Canon to it. Either way, you want to use the Ethernet connection of the Canon and set a valid ip address in it.
    With an ip address set, you can then add the printer by using the More Printers > Canon IP (UFR2) menu. This window lets you enter the ip address of the Canon and a queue name of LP. Then when you press okay, the UFR2 software should select the correct driver for your printer.
    PaHu

  • Using Alesis multimix 12, Alesis 520 usb powered monitors on a macbook pro with apple logic pro 9

    I can only get sound from my mixer and logic pro 9 from my internal comp speakers, but when I connect the usb powered monitors no sound. I can play itunes through the monitors but for some reason I cannot use the multimix and powered montiors, both being usb, at the same time. Any suggestions?

    Yes, but when just the multimix is plugged in it finds it in input, and when I connect the monitors it takes away the input and then the speakers are in the output but I cannot use them togther. Last night I coneceted the Alesis io2 interface and works, actually sounds better with my guitar tracks than the mixer.

  • I want to hook up a mac mini and us my tv as a monitor. how can I use airplay from my phone on the mac mini like i can with an apple tv (without having to buy an apple tv!). the airplay capabilities i want to use are mirroring and streaming from my iphone

    i want to hook up a mac mini and us my tv as a monitor. how can I use airplay from my phone on the mac mini like i can with an apple tv (without having to buy an apple tv!). the airplay capabilities i want to use are mirroring and streaming from my iphone!

    Download AirPlayer for Mac - Transforms your Mac into an AirPlay-compatible display. MacUpdate.com

  • After lollypop upgrade I can no longer transfer files from LG g3 to windows8 computer using USB charge cord. Can I roll back to Kittcat?

    After lollypop upgrade I can no longer transfer files from LGg3 to windows8 computer using USB charge cord. Can I roll back to Kittcat?

    That is definitely odd, grantcool. Let's help restore this important data transfer feature. To confirm, when you connect the USB cable to your phone and computer > Pull down the Notification Bar > Select USB Connected > Can you choose Media Sync (MTP) ?
    NicandroN_VZW
    Follow us on Twitter @VZWSupport
    If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • Hi, I am using USB 8476s to communicat​e to a slave unit in LIN network using LabVIEW7.1​. Can anyone tell me how i can send a header file plus 1 byte of data to the slave in a LIN network. or how do i use ldf file. i want to read responses from the slave

    Hi,   I am using USB 8476s to communicate to a slave unit in LIN network. Can anyone tell me how i can send a header frame plus 1 byte of data to the slave in a LIN network. or how do I communictae with slave using LabVIEW7.1.
    I want to read responses from the slave. When i tried with labview exapmle programs or even using MAX also, while doing some switching action in my slave, i am getting response as Device inactive with timestamp but there is no data format. 
    And I have Lin Description File. Can you suggest me how to use ldf file.
    I am at customer place and It would be great help from you if you can suggest me at the earliest. Thank you

    you may use the LDF Starter Kit to use LDF informations in your application
    http://joule.ni.com/nidu/cds/view/p/id/665/lang/en

  • Installing from Tiger to Snow Leopard using only external monitor?

    Backstory: I currently have a mac book pro which i procured from a friend after he dropped it and broke the screen. He promptly went to the apple store and bought a new one and had them swap the hard drives. After hearing this I told him he could most likely still use the old one with an external monitor even if the screen was broken. I hooked up an external monitor myself and what do you know the Tiger set up screen came up and i proceeded to set up this mac book pro for use.
    The issue:
    I now wish to upgrade this laptop to snow leopard or to leopard than snow leopard. The problem being when I insert the Snow Leopard disc into the drive and click install os when the computer reboots and reaches the set up screen it uses the second monitor as an extended desktop, not as a duplicate.
    This means i cannot see the install screens and therefore cannot upgrade.
    The F7 shortcut seems to do nothing which is sad because it worked in the initial setup of tiger.
    Does anyone know a workaround so I can duplicate the screens? Why would this not be the default behavior? What is the point of extending the desktop DURING setup?
    Also it seems some people are reporting problems with external monitors not being properly recognized once 10.6.3 is installed. Is there certain external monitors which avoid this?

    You could boot the laptop in target mode and install the OS from another computer onto the laptop drive.

  • I am using iMac OS 10.7.2 with Garageband'11 6.0.4. I can't record sound from  mixer Behringer X1622USB using USB out. when I connect the mixer to iMac via USB  appears USB Audio CODEC on Sound and preferences but no sound from mixer to iMac. Need help.

    I am using iMac OS 10.7.2 with Garageband'11 6.0.4. I can't record sound from  mixer Behringer X1622USB using USB out. when I connect the mixer to iMac via USB  appears USB Audio CODEC on Sound and Preferences but I can't get no sound from mixer to iMac only sound from iMac to mixer. I only can record sound using microphone line in. Please help.

    Eric,
    Thanks for your reply. Realtek audio works only in playback. There is a stereo mix in the mixer but the recording controls are not operable with no sliders in the mixer for any recording option. Slider controls appear to be grayed out. Can't figure out how to enable them. Downloaded newest drivers to no avail.
    The M Audio control panel has no apparent option for recording stereo mix. Adobe ignores the sound from the DVD or CD and shows flatline.
    I'm trying to record the sound from the DVD not rip the track.
    When I go to Audio Driver Setup and select Audition 3.0 windows sound, there is no input device installed.
    I'm thinking of going back to a decent internal Soundblaster card like I have on my 8 year old machine I am replacing.

  • Can I use USB for Samsung LD190 monitor?

    Just curious... I need a second monitor and this monitor can use USB too, but not sure how to make it work with my mac mini, anyone??

    Hello, not sure what you mean, but...
    I haven't tried it, but another option, OWC USB 2.0 Display Adapter ...
    Features
        •    Works on PC and Intel Mac models
        •    Lossless compression
        •    LCD, CRT, projector displays
        •    Connect one extra monitor per adapter to your desktop or laptop's USB port!
        •    Configure connected monitors to either clone your primary screen, or extend the desktop allowing visibility of more applications at the same time!
        •    Display Modes:
        ◦    Can easily Mirror the main display
        ◦    Extend left, right, above, or below
        ◦    Can be rotated left, right, or upside-down
        •    Windows Vista & 7 Aero support
        •    Windows XP and Vista 32-bit support
        •    Standard and Widescreen ratio aspects
        •    High-Performance DDR memory
        •    Completely silent operation
        •    Uses very little computer resources and offers a vast array of screen resolutions and color depths ensuring little performance difference between a screen directly connected or via USB 2.0
        •    Supports resolutions up to 2048 x 1152 including SDTV/HDTV resolutions: 480i/p (640x480), 720p (1280x720), 1080i/p (1920x1080)
        •    Bus Powered Operation - no external power supply neededRequirements
        * Available USB 2.0 port
    Compatibility
        * Macintosh
              o Intel based Mac OS X 10.4.11 and above
              o Supports up to four monitors
    http://eshop.macsales.com/item/NewerTech/VIDU2DVIA/

  • If I use a USB stick for time machine, will I be able to install Windows (using bootcamp) from the same USB?

    I have a 64GB USB Stick, and I am interested in usign it with time machine. My question is, firstly, is this possible? And secondly, if I do do this, would it be possible to install windows using bootcamp from the same USB. My mother refuses to let me install windows without a backup of Mac OS X, so I really need to know if this is possible???

    You need to use a drive that is larger than your Mac's internal drive for Time Machine, so a USB stick will not work.  You need to buy an external hard drive.  It's worth it. Time machine is a fantastic backup system, keeping not just a single backup, but multiple versions of your files as well (hence the need for a larger drive).

  • I want to use my I Pad mini to play videos from my Gopro Hero HD camera and also to use as a monitor if possible?

    I want to use my I Pad mini to play videos from my Gopro Hero HD camera and also to use as a monitor if possible? What software would i need to use ? I movie is what i use with my I Mac not sure if this will work on I Pad Mini?

    At first I thought that this solved my problem, but alas it didn't. It does appear to add display area for your computer or to suplement it. But it is not a view screen for your Mini. I guess I will just have to live on with my monitor and use my Ipad and the "remote" app to run Itunes.
    Once I have the system all set up, I could use the display but I don't know why I would. Thanks for your help.

  • Using USB-8451, and AD7747 from Analog Devices to measure capacitance and convert the capacitance to digital output

    Hello,
    I am new to LabView and data aqusition. I have LabView 8.5.1 installed on my laptop, and I studied the Getting Started document of LabView, except the data aqusition chapter.
    I have microfabricated a differential capacitive sensor, and now I want to test the capabilities of my sensor.
    After asking NI engineers, I have been suggested to use USB-8451 with AD7747 (24-Bit Capacitance-to-Digital Converter) from Analog Devices because AD7747 has I2C serial interface.
    I have ordered USB-8451, AD7747, and Evaluation Board for AD7747. And I am waiting for them.
    Are there any suggestions about how to connect my differential capacitive sensor to AD7747, and eventually to USB-8451?
    You may want to know some further information to answer my question:
    *The sensor is similar to the sensor on pages 501, 514, and 515 of "Microsystem Design" book from author Stephen D. Senturia.
    *The datasheet for AD7747 can be reached from this link: http://www.analog.com/static/imported-files/data_sheets/AD7747.pdf
    *My purpose is to make a very precise and accurate "displacement measurement micodevice" by using "the change in the capacitance" during the motion of the mobile fingers of the sensor.
    As an initial challenge for myself, I will feel satisfied if I can measure the capacitance change in my sensor when I apply an external mechanical disturbance to my sensor. For example, there must be a change in capacitance if I just swing my hand from top of the sensor region.
    I am looking forward for your reply,
    Thanks in advance,
    Sincerely,
    sriverfxtr

    Hi Aaron,
    Here you go, this is made with a USB-8452.
    When you run the code tick the power en dac enable box on.
    Maybe you can help me with my problem, I want to use a fiber to sense light from a led.
    Do you use any fiber hardware with the TCS3414?
    gr,
    Attachments:
    TCS3414.vi ‏63 KB

  • After upgrade to ios7 on iphone parts of audiobooks from Overdrive will notsync. sync.I'm using usb to desktop to transfer.

    After upgrade to ios7 on iphone, parts of audiobook from Overdrive will not sync. I'm using usb to desktop to transfer.

    Plug in the memory stick and it should open then create a New Folder and drag and drop the contents from the memory stick to the new folder you created. Remove the original memory stick all the information should be in the new folder you created. Now plug in the new memory stick with nothing on it when it opens drag the folder with the contents from the original memory stick folder and all into the new memory stick that opened and there you have it.
    CHEERS
    DON

  • How can analog signals are measured every several counters from Quadrature Encoder using USB-6221

    how can I sample analog signals every counters from quadrature encoder using usb-6621?

    There is a well documented example of what you are trying to do at :
    http://zone.ni.com/devzone/explprog.nsf/webmain/DD85F07A7CA99F8F862568690062DE54?opendocument
    Don't be afraid because of the BNC-2120. It is just used in this example to simulate the pulses from a device. So it is not needed in your case. Obviously, you will need to change the number of increments/rev according to your encoder to get correct RPM values.

  • Transferring itunes from desktop yo laptop using usb stick?

    I am currently trying to move my itunes music from desktop to laptop using usb stick, i can get the music onto the usb stick from my desktop then try to cut and paste it to itunes music folder but it dosent show up in itunes itself, what am i doing wrong?

    Paste it into another location on the laptop, and then drag it from there into the open iTunes window. iTunes uses a database to determine what's in the library instead of looking at the content of the iTunes Music folder.
    (36433)

Maybe you are looking for

  • To what folder do I upload the google webmaster verification file too?

    Trying to verify my website on BC so I can get the sitemap searched. WHICH folder do I upload the google webmaster verification file too? Thanks!

  • Connecting i-pod to computer and getting it to come up on i-tunes...

    I can not get my i-pod to connect to my i-tunes. The only way that I can get my i-pod to connect with the new 7.0 i-tunes is to restart my computer with the i-pod connected. Is there anyway to get my i-pod to connect as soon as I plug it into my comp

  • Transfer video iPod to iPad

    I recorded a video on my iPod touch and need to move it to my iPad to edit it. It is rather lengthy (10 min.), but I'd be glad to chop it into pieces to move it. I'd appreciate any help in knowing the easiest way to do this. I'm not going to be doing

  • Adobe Production Premium CS3 does not support MXF files

    My computer crashed the other day and I had to install Adobe Production Premium CS3 on another computer. I noticed when I tried to start a new project there was not an option under Presets for DVCPROHD and when I tried to import my files with Bridge

  • [CS3] the file cannot store XMP metadata

    Hello, I want to add some metadatas like keywords and description to my video files (raw avi and mpg). It works for most of them in bridge but some will not accept any changes. I get the following error message: "xxx.avi cannot store XMP metadata. No