User Account Name

How do I change the user account name in adobe digita edition?

This is tied to your Adobe ID and cannot be changed arbitrarily. If you change your Adobe ID, it will change there.
Mylenium

Similar Messages

  • After installing new operating system software, my user account name has been changed and i don't know the password.

    i need help!
    I just installed Mac OS Maverick in my laptop, but when i checked the Users&Groups There are only 2 User name 1 is  "Apple(admin) and 2 is Guest, my user account name has been changed even the password. how can i retrieve my old user account name and password or how can i changed it?

    Here's an updated set of instructions you can try:
    Make sure you are signed into iMessage and FaceTime with your current ID.  If they are signed into the old ID, go to Settings>Messages>Send & Receive and Settings>FaceTime, tap the ID, sign out, then sign back in with your current ID.
    Then temporarily recreate the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  (You should not have to verify the old email account so it doesn’t matter if you no longer have access to it.)  Now go to Settings>iCloud, turn off Find My iDevice and enter your current password when prompted (even though it prompts you for the password for your old ID).  Then save any photo stream photos that you wish to keep to your camera roll (unless using iCloud Photo Library).  When finished go to Settings>iCloud, tap Sign Out (or Delete Account if you are not running iOS 8) and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address back to the way it was.  Now you can go to Settings>iCloud and sign back in with your current iCloud ID and password (your data will download back to your device).

  • No user account name on backup drive to boot from

    My internal hard drive crapped out, and in using disc utility off the install disc it could not be repaired and reads "un-repairable disc" or something to that matter. But I have a second internal hard drive I've been using to back-up my main drive. So I tried to launch off that instead, but to my surprise it has no user account name so I can't log or use any password and all the blanks to log in are unusable...
    Any suggestions? How can I create a user account and boot off the other drive?

    How did you Backup? What APP did you use?
    On the main Drive...
    Unfortunately DU can't fix all that much, your best bet is DiskWarrior, you need the CD though.
    http://www.alsoft.com/DiskWarrior/
    But others that may work…
    Drive Genius 2…
    http://www.prosofteng.com/products/drive_genius.php
    TechTool Pro 4…
    http://www.micromat.com/index.php?option=com_content&task=view&id=31&Itemid=83
    So I tried to launch off that instead, but to my surprise it has no user account name so I can't log or use any password and all the blanks to log in are unusable...
    Is there an OS on there? You mean it boots to the Login Window but nothing works?
    If so...
    Reset OS X Password Without an OS X CD...
    http://theappleblog.com/2008/06/22/reset-os-x-password-without-an-os-x-cd/
    Once you've done that the computer reboots and it's like the first time you used the machine. Your old accounts are all safe. From there you just change all other account passwords in the account preferences!
    applesetupdone...
    http://discussions.apple.com/thread.jspa?messageID=6059333&#6059333
    http://www.askdavetaylor.com/howdo_i_reset_my_mac_os_x_admin_rootpassword.html

  • Changed user account name and moved to OSX Yosemite. Apps still work, but cannot download new apps or updates.

    I recently moved to a new MacBook Air with a physically larger hard drive. I had a coworker move over all of my software and data, and everything seems to be playing nicely. All of the current apps I have in place like Photoshop and Illustrator are working just fine.
    Unfortunately when I try to download other apps in Creative Cloud it just shows Download Error. I tried reinstalling Creative Cloud, which did nothing.
    I should note that when I moved to the larger machine I changed user account names. Whenever I try to use FileSync, it says it is looking for a folder in the old user account folder. This occurs even after trying to change where that folder is in the Preferences.
    Additionally I have updated from Mavericks to Yosemite. I do not know what effect that had.
    Any insight how to restore my ability to get downloads and updates? Or perhaps how to fix my FileSync?

    I think I have it resolved by uninstalling everything and running the cleaner per these instructions: Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

  • Whitespace in User Account Name causes issues with various functions

    I've run into a few issues with users who have whitespace in their account names (for example, a user account name that was: "Joe Smith"). Generally, I think this is a result of windows interpreting the last name as a parameter when it tries to
    run a certain function. One place where this occurs and is easily replicated is in the "Troubleshoot Program Compatibility Wizard" which gives an error about permissions, another place this occurs is in the dx9 web installer which gives an error
    message concerning advpack.dll
    In both of these cases I've been able to 'fix' the issue by relocating the TEMP and TMP environment variables to a folder like C:\TEMP, however I still have some issues with other installers and programs such as the 3rd party Cordova build program and the
    android sdk which both get stumped by spaces in the user account name. From my understanding there is no way to change a user account name (not just the name which displays but the name which Windows reads) without deleting the account and copying often several
    gigabytes of files and settings over to a completely new account. Is this correct? Is there a way to remove the whitespace from an account name without these hackish workarounds? Is there anyway to report this as a bug to Microsoft in the hopes that they either
    remove support for usernames with whitespaces or come up with some way to make their internal features like the Compatibility Wizard operate correctly in these (fairly common) install environments? It's an incredibly pesky bug to identify....

    1. Spaces are allowed but not recommended. I would avoid using space(s) in account names.
    2. I do not understand what you have prevented from changing user name.
    3. For problems with 3rd pty programs ask support/forum of respective software vendors.
    4. If you feel like addressing Microsoft, use
    http://support.microsoft.com/contactus/?ln=en-us
    Regards
    Milos

  • User account name and home directory name do not match

    A month ago I bought the latest iMac and used Migration assistant to migrate all of my data on over.
    Everything went well... Except that my new iMac would not let me use my old user name. I had to create somethign else.
    So my user (admin) account name is not the same as my Home directory name. (I only have 1 user account and 1 user Home directory... they both are named differently).
    This has not caused problems, but I want to iron this out. I tried using System Preferences/Users and groups to change my user account name to match the name of my home directory name (which has my old user name)... but when I did that it said "Name not available".
    Long time Mac user but I'm not comfortable doing anything deeper without some input & advice.
    Thanks in advance!

    I enable the Root user as outlined in the Apple Way instructions...logged out and loged in as the rooot user... but I really don't want to change the name of my user directory... That's the name I want to keep as a User.
    Even logged in as a Root User...
    I tried to change my current User Name to match by directory name, but it said Name is Not Available
    I also tried to create a new User name that matches my directory name...same results Name is Not Available
    Is there a sudo entry that will change the User to match my Directory name (which I want to keep and use)?
    Thank in advance!

  • Editing User Account Names

    How do I edit a user account name, e.g. from "John Smith1" to simply "John Smith"? Can the short name be likewised edited? Does having a "John Smith" in the Deleted Users Folder affect this?
    Mike

    1) Changing the account name can be done from the System Preferences > Accounts prefpane.
    2) Changing the shortname is not a trivial task and is generally discouraged, but there are utilities such as ChangeShortName that will do it.
    3) No.

  • Unable to log in to the user account (name) at this time

    I get this error message when I try to log-in in my main admin account. And this is not a lost password issue I know im typing the write password because when I type a wrong one the box shakes when I type the right one it gives me that message.
    I tried alot of stuff to gain access to it but I cannot, the only thing that I can do is go in as root user and extract the files that I had in there, but I have no physcial access to the login it self, I started making a different account name for it but I dont want to lose all my prefrenses although I think the only thing that is making it this way is File Vault (its swtiched on for the locked out account)
    Any thoughts?

    I'm also getting the dreaded "You are unable to log in to the user account __ at this time" but believe this happened when I inadvertently tuned off an external hard drive without ejecting it first. At first, I thought it was a File Vault problem, but my user.sparseimage file is still there and accessible once I changed the permissions to those of another user account.
    What I have come to believe, based on other postings I have read on this topic, at least in my case, is that I must have corrupted the logged in user on the netinfo file. The solutions I've seen so far for fixing the netinfo file seem pretty complicated, though I do have a backup of that file.
    I have yet to decide whether the netinfo problem is easily fixable or if I would better employ my time moving my iTunes and iPhoto files off that sparse image and into another user account. I'm open to suggestions.
    Bill
    iBook G-4   Mac OS X (10.4.7)   1.33 GHz, 768 MB memory, 60 GB HD, iPod Shuffle

  • Can't "see" User account name in the GUI anymore ...

    Hello Community
        Using WS2012 I created user account in AD.  I right clicked a user account and chose "Move".
        The problem is my finger slipped and hit other keys.
        Now I can't see the user account anymore.
        When I run the following command:
            get-aduser -filter 'Name -like "user1"'  I get the results below:
                DistinguishedName : CN=user1,DC=<DomainName>,DC=<SomeName>,DC=us
        The problem is how can I "see" what folder name, OU or the group's name that user1 resides at in
    the GUI?
        Thank you
        Shabeaut

    If I understand well, you were able to get the user DN. Based on the name, the user account should be directly under your domain (Not under an OU or a Container). So, use ADUC and select your domain. Once done, you should be able to see the user account.
    This posting is provided AS IS with no warranties or guarantees , and confers no rights.
    Ahmed MALEK
    My Website Link
    My Linkedin Profile
    My MVP Profile

  • How to use migration assistant when the same user account name is on both computers

    I want to migrate all my info from my MacBook to my new (to me) MacBook Pro.  I've already set up a user account on the new MBP that has the same name as the user account on the MacBook that I want to migrate. 

    Snags40 wrote:
    In both cases the UID for my primary User Account is 507
    507?  That's odd; usually the first one created is 501, then 502, etc.  Could you have gone through 6 accounts?
    Since I've migrated thru several Macs to get to the current state on the old MacBook, I suspect the UID has changed.
    That could explain some of it, if you used Migration Assistant instead of Setup Assistant.  It would have taken a lot of migrations and user accounts to get to 507, I'd think.
    I still have the Powerbook that preceded the MacBook.  How can I determine the UID on 10.4.11?  The right click on the Account name in User Accounts doesn't show that value.  I'd like to see if UID has changed going from 10.4 to 10.5.
    Good question.  I skipped Tiger, and don't recall earlier versions, but this article may help:  http://hints.macworld.com/article.php?story=20051022175850619&query=change%252BU ID

  • New User Account Name fixed crashing photoshop cs4 with Snow Leopard

    I don't understand why, but creating a new user account fixed the SL/photoshop CS4 crashing issue. I don't have all my settings and shortcuts etc., so its for photoshop only until apple/adobe comes up with a fix.

    Most likely items are:
    Preferences
    Fonts
    Caches
    New user accounts are a great way to isolate user issues from systematic ones.
    You can look above for hints as to where the problem(s) lie.
    Scott

  • I have a 5 yr. old iPhone 3GS, I can't back it up to my laptop, it's not working, but wondered if i can back it up to her laptop, if I create a new user account name, w/out losing her info?

    My 5+ yr. old iPhone 3GS is on it's last legs. I desperatly need to "back it up" ASAP, so I can buy a new iPhone, and I really need to be able to transfer my 5 years worth of info to a new iPhone, (a 4S). The computer I used to back my iPhone on when I first got it no longer works, so I was wondering about being able to back my iPhone up to my daughters laptop, but she also has an iPhone 3GS, that's already backed up to her laptop. I know you couldnt back up two iPhones up to one computer, (at least that's what I was told, years ago), but I was recently told by an "Apple" rep that I could "probably" back my iPhone up to her computer without losing anyone's info, if I created a "Secondary User Name Account" on her computer. I'm not comfortble doing this unless I'm reassured more than being told that it's "probably" safe.
    Does anyone know what options I have, and if this idea would result in one or both of us losing our info, if we tried to store two iPhones "back up info" on one laptop?
    My phone's barely working at all, but I can still access my info, (for now, at least). I really need to do something now.
    Could anyone who knows how this works please give me some info?
    Thanks in advance.

    First, you don't have a 5+ year old 3GS. The 3GS has only been around for under 4 years. In fact, 5 years ago there were NO iPhones; the original iPhone (2 generations before the 3GS) came out on June 29, 2007 - not quite 5 years ago. The 3GS was released June 19, 2009.
    That aside, you can sync multiple phones to one computer - see http://support.apple.com/kb/HT1495. boogeyman is wrong. It is 100% safe to create an additional user name on her computer, log in with that name, and back up the phone. See this for details on what you want to do: http://support.apple.com/kb/HT2109

  • What is my vimeo user account name?

    Hey there,
    I'm in the final cut pro X vimeo uploade feature and it's asking for my account user name.
    I've got my name as Caleb Kingston and my end url as stunninganimations. Which one of these do I use?

    Well the silly thing with FCP is you can enter anything you want, hit publish and it will take an hour or two to export the video and THEN at the end, it will tell you whether it was right or wrong. I tried it once and entered the wrong username or password and left to go home expecting it would be uploaded by morning but when I came back, it was stuck with that error. I can't remember what I tried last time so I just wanted to be positive I got it right this time before going home. lol

  • User Account name is wrong.

    I cannot get into my account because you put the wrong username on my account.  My username is chicoglen, and you have it as glen.cauthon!  Therefore, my password does not work.  This is why I left skype before....it seems that you cannot get things right!

    I don't really understand which email of Skype you are referring to. But to change the Skype name you signed into Skype simply select "Sign out" from the "Skype" menu and you have the option to use your original name again.
    (I've also removed your full Skype names from your post to protect your privacy)
    Follow the latest Skype Community News
    ↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

  • SharePoint 2010 Web Analytics showing user Display Name and Account Name from the same user

    Hi!
    Since July, 16th 2012 the Web Analytics Daily Unique Visitors reports started to show almost the double of visitors we used to have on our Web Application. Here are some of the data (I intentionally deleted the weekend data):
    10/7/2012 2.497
    11/7/2012 2.723
    12/7/2012 2.722
    13/7/2012 2.699
    16/7/2012 5.055
    17/7/2012 4.963
    18/7/2012 4.954
    19/7/2012 4.998
    20/7/2012 4.965
    23/7/2012 5.117
    24/7/2012 5.012
    25/7/2012 5.071
    As you may notice the data jumped from around 2.700 unique visitors to around 5.000 unique visitors. As the number of permissioned users remains constant it is pretty odd. I also checked the Number of Page Views report and see no change on its behavior.
    The number of page views remained constant.
    So I went to look the Top Visitors report and understand why the visitors number almost doubled. The analytics started to count the users Display Name and Account name as two different visitors with a different number of page views. Let me show you an example
    from yesterday (July, 25th) Top Visitors report:
    #     Visitor                  Page Views    %
    1    Cinthia XXXXXXXXXX    359        0,55%
    5    Giselle XXXXXXXXXX     143        0,22%
    7    Aline XXXXXXXXXX       138        0,21%
    15  nt\cmazevedo              111        0,17%
    60  nt\gbsantana                 69        0,11%
    73  nt\aglsiqueira                 65        0,10%
    "Cinthia" and the account "nt\cmazevedo" are the same person. The same is applied to "Giselle" / "nt\gbsantana" and "Aline" / "nt\aglsiqueira".
    As I stated this is an example from July, 25th. If I checked the same report from a period before July, 16th I can only see the users Display Name as "Visitors". No account name is displayed or counted as a different visitor.
    About the environment:
    We have two SharePoint 2010 farms: a "corporate" and a "enterprise". The corporate farm contains four web servers and a central administration servers with publishing services. The enterprise farm contains two servers running User Profile Services, Search
    Services and some others. Our main version is the SP1 with June/2011 Cumulative Update with a few more hotfixes applied.
    This behavior on analytics is affecting all web applications (we have more than 20) installed on this farm and my company Support team said that no change were made on SharePoint on the weekend the problem started.
    Does anyone have any tip about what is going on?
    Thanks in advance!

    Hi, Manas!
    First of all thanks for your interest on this issue but I don't think it is related to the User Profile or the Active Directory.
    I checked both records and there was no change on the Display Names. All the users have "full names" as display names (first + middle + last name) and not logins as SharePoint is displaying on this report.
    But I did a test yesterday and checked the results today confirming that just the access been made using a specific server are causing this. Explaining it better:
    I have four web servers on my farm named from P01 to P04. Then I created this test script:
    Step 1: Change local HOSTS file to point the web application on the server P01.
    Step 2: Access site "A"
    Step 3: Access site "B"
    Step 4: Close the browser.
    Step 1: Change local HOSTS file to point the web application on the server P02.
    Step 2: Access site "C"
    Step 3: Access site "D"
    Step 4: Close the browser.
    Step 1: Change local HOSTS file to point the web application on the server P03.
    Step 2: Access site "E"
    Step 3: Access site "F"
    Step 4: Close the browser.
    Step 1: Change local HOSTS file to point the web application on the server P04.
    Step 2: Access site "G"
    Step 3: Access site "H"
    Step 4: Close the browser.
    I asked three users to execute that script. The results: All access to the sites "C" and "D" were registered on Web Analytics with the user account name such as "nt\cmazevedo". All the other sites registered the user Display Name correctly such as "Cinthia
    XXXXXXXXXX".
    With this test we could isolate the problem just on the server P02. It doesn't occur on the others. Now my support team is trying to find any configuration difference between this server and the other three that could point for the root cause.
    I am also looking for some information regarding the service responsible for this task ("transform the account name into a display name") to understand why it doesn't work on one server and works on the others.
    Thanks!

Maybe you are looking for