User-activated link to sound file

How do I create a user-activated link to a sound file that
will simply play the sound without either (a) launching a
free-floating controller for the sound or (b) rendering the sound
visible on a new blank page? Doing this: <a
href="boing.wav">BOING</a> creates either one of those
actions, depending on the browser.
Thanks for any help you can provide!

> How do I create a user-activated link to a sound file
that will simply
> play the
> sound without either (a) launching a free-floating
controller for the
> sound or
> (b) rendering the sound visible on a new blank page?
Embed the music in a flash file with it's own playback
controls.
-Darrel

Similar Messages

Users activity in a log file

Hi all,
someone can tell me if there is some log or table where i can find users that were connected on application?
i need some info as logon user, IP and time elapsed during connection.
Or i have to enable auditing?
thanks!
Andrew

Please check the following notes:
Note: 399130.1 - END_TIME In Table FND_LOGINS Is Not Updated After User Logged Out From Selfservice
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=399130.1
Note: 226867.1 - 11i.FND Sign-On Audit Level does not populate FND_LOGINS.END_TIME
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=226867.1
You have to run "Purge Signon Audit Data" concurrent program on regular basis to delete the old bogus data from the relevant FND Signon Audit tables.

Clcking on a sound file?

How do create a user-activated link to a sound file that will
simply play the sound without either (a) launching a free-floating
controller for the sound or (b) rendering the sound visible on a
new blank page? Doing this: <a
href="boing.wav">BOING</a> creates either one of those
actions, depending on the browser.
Thanks for any help you can provide!
Robert Gerst

i guess for spot signs you mean cue points. i know they can
be inserted
in FLV's but not sure if the same is valid for audio files
take a look at help
plastelina wrote:
> I want to make a Karayoki engine with flash.
> I heard that 'director' can recognize spot signs in a
sound file.
> can flash do the same?
> how?
> where can I read more about it?

Sound file and custom play.

Hello, I have an sound file and, want to play part's of this file not the whole sound file every time, in my application.
e.g i want to play from 1:23 min till 1:29 min can i do this in an iphone app and how?
Thanks in advance!

yes i know that way, but i want to have a big sound file and keep some pointers in an array with the seconds i want, depending some user actions, the whole sound file is usable, but in different user actions different parts of it will be played! Is there a way doing that? Without splitting the file into pieces?
A similar example could be found at youtube comments when someone writes a time point...example 3:25 of the video this refers to a link and when its pressed you auto transferred to the 3:25 'th second of the video....I tried to give you a related usage...I dont know if you understand what i mean...
thanks anyway!
Message was edited by: ZaaBI_AlonSo

Links to mp3 files in pdf docs not working on laptops

I'm working in IDCS3 on imac OS 10.4.11, producing pdf documents with links to sound files (mp3) and video (mp4). The sound/video files are not embedded.
The pdfs and sound/video files are placed on a CD. We have tested these pdfs on desktop Macs and desktop PCs, and the links to the sound files work fine, but on a laptop the links to the sound files fail completely (ie usually nothing happens, though sometimes there is a message saying the computer is searching on the C drive for the files, instead of in the correct folder on the disk). The links to the video files do work though. Any ideas?

I have tried to embed the mp3 and mp4 files, but the place command will not recognise them (they are always greyed). The only way I have been able to make the sound files play is by linking to the files using a button, but the 'embed all' command on making a pdf doesn't seem to work with this.

Link to a file, but opened in new window

Hello,
I have a text, which I wanna turn into an active hyperlink to a video file. I go to HYPERLINK, check Enable as Hyperlink, check Make hyperlink active, link to a File, Input URL. Everything works, except the file opens in the same window as my website, so after watching video, a viewer has to return to my webpage. Is there any way, that I could make the file open in a new window?
Thanks

Try the method on this demo page: Opening Item in New Specially Sized Window.
OT

Sound files from Keynote (or Powerpoint 2004) do not work in Windows

I have spent many hours designing slide shows in both Keynote & Powerpoint 2004 on my MAC that include sound and they work great. HOWEVER, all slide shows I send to Windows users NEVER get the SOUND files. HELP>>>>>>

Since PowerPoint is not an Apple product, you may want to post your question on Microsoft's own Mac fourms:
http://www.microsoft.com/mac/community/community.aspx?pid=newsgroups

When I try to access an active link from a website (usually a pdf file), the new tab opens and is labeled correctly; the word "done" appears at the bottom; but the page does not open or download. The same problem does not occur with Chrome.

Example: on the home page of the website http://www.dot.ri.gov
there is an active link entitled "Overview of all Iway changes - Fall 2010"
Clicking on it exposes the following url:
http://www.dot.ri.gov/documents/iway/Iway_Changes_Fall2010.pdf
However, the tab remains blank, even though it says "Done" in the bottom left corner.
When I use Google Chrome as a browser, I have no problem opening that url.
This has occurred numerous times over the past several days on several different sites--and usually the link that will not open is a pdf file.

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

Can't open Safari - but can hear sound files when a link is selected

I can't open Safari from either the desktop icon or through Finder. However, when I click on a web link, through an email I can hear the sound file.
I have another Mac that can still access the internet (i.e what I'm on now) They are networked.
How can I fix this? In the meantime could I put up another web browser to use? How do I do this though?

Safari's preference file may be corrupt. In the Finder, drag to the desktop the com.apple.safari.plist folder found in your User Account>Library>Preferences folder.
Restart Safari. If this works, you'll need to reset your custom preferences, plus any custom settings in the Edit (spelling) or View (status bar, bookmarks bar, custom icons etc.) menus.
Otherwise, move the file back to its original location. The alternative would be to try Safari from another User Account. Here is guidance from Apple on how to set up the account. You can ignore step 7 in the article.
Also, on the system preference>Accounts panel, click on "log-in" options. There, select "fast user switching". This allows you to go back and forth between user accounts via an icon in your Menu Bar at the top of the computer screen.
Log-on to the new account and start Safari. If the sites are accessible in the new account, then your problem is specific to your regular user account. Otherwise, similar response means a system-wide problem.
Post back with results.

Having active file links to text files in pdf

Hi,
I have a Word doc that has a number of embedded text files that are accessible by double-clicking the text icon. When I convert the Word doc to pdf these will not launch Notepad with the actual text file that is needed. Any suggestions on how to embed the text file so that it is launchable from the pdf? I originally just copied and pasted the icons from the email as they were sent to me. They launch from Word with no issues but will not when converted to pdf. Thank you.
Brian

I have tried to embed the mp3 and mp4 files, but the place command will not recognise them (they are always greyed). The only way I have been able to make the sound files play is by linking to the files using a button, but the 'embed all' command on making a pdf doesn't seem to work with this.

Link between slides & sound files broken

Following an inadvertant folder move the slides in a slideshow are not now linked to the corresponding narrative sound files. Can the link be re-eastablished and if so how?
Peter Goldsworthy

if, for example, A is a class name, you should use "A" and then use getDefinitionByName() to retrieve the class reference from the string.
private var lettersL1:Array = new Array['A','F','G','H','I','N','O','S','T'];
for(var i:int=0;i<lettersL1.length;i++){
var C:Class=Class(getDefinitionByName(lettersL1[i])); // import flash.utils.getDefinitionByName
var c:*=new C(); // create instances from the classes in lettersL1
// do whatever with c
or, move those instanciation statements into your LetterArray constructor or somewhere beyond like:
package
    import flash.display.*;
    import flash.events.*;
    import flash.text.*;
    import flash.utils.Timer;
    import flash.media.Sound;
    import flash.media.SoundChannel;
    import flash.net.URLRequest;
    public class LetterArray extends MovieClip
        private var _stage:Stage; //this reference works well to the main file. Should I somehow link it to the errorous code below?
        private var letterArray:Array;
        private var lettersL1:Array; //this is the line that causes the error. I am sure it is because I need to add something to the main class.
        public function LetterArray(ss:Stage):void{
            var a:A = new A();
            var f:F = new F();
             etc
            lettersL1 = [a,f,...]
            _stage = ss;

Send an activation link to new user's email ID in webdynpro java

Hi Experts,
We have developed a custom Web Dynpro java application for the SAP user self registration.
The user is being created successfully in UME db and we are also able to send an email to the user's registered Email ID.
Now, as per the requirement we also want to send an activation link to the user's email id so that once the user clicks there then only the user ID gets activated
Kindly let us know the steps involved so that we can achieve the functionality.
Thanks And regards,
Ghanshyam Agarwal.

i think it's so general, nothing to do with sap
1.lock the created user when creation
2. create a table to store the newly created user
3. create a servlet to receive the activation call
4. remove user from the table and unlock user

How to import and play sound file from mxl link?

I need to load different sound files dependent on which link you previously clicked in my app, but cannot figure out how to call the link to the sound file from my mxl file:
<carRace>http://www.unisux.org/zik-car/lamborghini-diablo-gtr_standing-start.mp3</carRace>
Can someone tell me what I am doing wrong in this code?
<fx:Script>
   <![CDATA[
                                        private var req:URLRequest;
                                        private var context:SoundLoaderContext = new SoundLoaderContext(1000);
                                        private var bCall:Sound;
                                        private var bSong:Sound;
private function playSong():void
                                                  var urlSong:String = "{carRace}";
                                                  var request:URLRequest = new URLRequest(urlSong);
                                                  bSong = new Sound(request, context);
                                                  bSong.play();
]]>
</fx:Script>
because this code does work:
<fx:Script>
   <![CDATA[
private var req:URLRequest;
private var context:SoundLoaderContext = new SoundLoaderContext(1000);
private var bCall:Sound;
private var bSong:Sound;
private function playSong():void
var urlSong:String = "http://www.unisux.org/zik-car/lamborghini-diablo-gtr_standing-start.mp3";
                                                  var request:URLRequest = new URLRequest(urlSong);
                                                  bSong = new Sound(request, context);
                                                  bSong.play();
]]>
</fx:Script>

Visit: http://www.tools.de/solaris/
you will love sound/audio programming.... source available.

Linking Sound File to Project

I have imported sound files into a slideshow project and associated them with still photos and cannot burn a DVD. All of the sound files are orange and appear to be unlinked. I don't know what to do. Can't find the problem described in the manual. Can anybody help. Thank you. Jerri

http://discussions.apple.com/thread.jspa?messageID=2528935&

How Can I Attach and Link an XML file to a 3D Model in a PDF?

How Can I Attach and Link an XML file to a 3D Model in a PDF?
What I am trying to do is find out how to have a 3D model and a parts list linked to it within the PDF file. I would also like to be able to add to the parts list if at all possible once the pdf has been created. A template to create future PDF's with the 3D model and list might also be useful.
I am not entirely sure if this is all possible within a PDF file, but I have viewed a PDF (Adidas Trainer) example which has a Excel file attached to it which links to the 3D model. I have also had a look at partner products such as Lattice, Tetra4D, Anark, which can do animations and all sorts, but frankly it seems a bit overkill for what I am looking to do.
Please, any help would be appreciated. Thanks

AlliCT59 wrote:
> Shared Object sounds like it would work, but hten agian,
I'm really stuck!
>
> Thanks for any help.
>
> Allison
I wrote about it while ago, let me paste the whole thing.
This example has simple
buttons which upon click go to new sites and in the same time
place record in form
of *.SOL file on user drive. That record is read when you hit
the next button and
based on that the button will be selected as the one last
clicked.
You could use the very same thing just instead of suppressing
button simply gotoAndPlay frame
to continue the part you need.
http://groups.google.com/group/macromedia.flash.actionscript/browse_thread/thread/36649453 1f4fd02d/245a57d0cdaa1d29?lnk=st&q=&rnum=3&hl=en#245a57d0cdaa1d29
The source is in a different place, i re-upload for you :
http://www.flashfugitive.com/stuff/SharedObj_urlcheck/
fla file
http://www.flashfugitive.com/stuff/SharedObj_urlcheck/beentourl.fla
Best Regards
Urami
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

User-activated link to sound file

Similar Messages

Maybe you are looking for