User Address details

Hi,
My requirement is little bit unusual...well, is there any transaction where I can get only the details ( of all the users) present in the addresss tab(SU01) ?
Thanks and Regards,
Damanaidu J

Part1: Person
T-code SUIM
Users by Complex Selection Criteria
Enter user name you will get all the datau2019s
Part2: Communication
Phone Number and Email Idu2019s
Sterp1
Go to Table USR21
Enter the user name or if you want all user list enter * and execute
Copy the person number
Step 2
Go to Table ADR2 /ADR4enter person number you will get all conduct numbers/Telephone number/Extension number/mobile number
Go to Table ADR6 enter person number you will get all Email IDu2019s
Another way
Using T-Code SQVI
Merge/Map the tables as per your requirement and you will get.

Similar Messages

  • Table for User Address details

    Hi All,
    I wanted to know in which table the address of the employees (users) saved in SRM5.0? I checked function module BAPI_BUPA_ADDRESSES_GET, but it just links the business partner number to the Address Guid. How do I find which address detail is linked to this Guid? I checked table ADRC, but couldnot find it there. Could anyone help me on this?
    My actual issue is that, for a particular user,the address information doesnot showup in the shop screen(when I try searching for this user using 'shop for' option). The users in SRM are replicated from HR Org structure in ECC6.0
    So, I wanted to know which table of SRM is not updated with the address linking this user.
    For this particular user, I can find 2 address guids from the function module, BAPI_BUPA_ADDRESSES_GET. Is that the reason for this issue?
    How do I resolve this?
    Regds,
    Ancy

    Hi,
    The link between these two business partner number is Person number.. Following is the architecture..
    1) User will have a Business Partner number in SRM
    2) Company/org will have a Business partner number in SRM
    3) There is something called User and company relationship will exist by person number, i.e. User's official information like  Building, Floor, Room Number are stored under company's /org's BP address number refer to person number..
    BP u2013 Business Partner *************
    This should be helpful..
    Thanks!!
    Bharath

  • Ship to(partner fun - WE) address detail during user exit.

    Hi All,
    I am doing changes in user exit - MV45AFZZ
    Now I can get address no. for ship to in XVBPA table and get the address detail. But if some one changed the value manualy how could I find the new value.
    Mean is there any internal table which I could read to get the address detail for ship to partner function in user exit.
    Please update me. Thanks a lot.

    Hi even if someone changed the value manually in the correspondingaddr table,then  table would again be updated in the address table from where you are picking the details using the address number.
    Regards,
    SuryaD.
    Edited by: SuryaD on Dec 21, 2009 9:58 PM

  • Mass user address data req

    Dear All,
    How can we get mass user address data such as SAP ID,Full name,E-mail ID,Building code,Contact details in one single report or from any Table?
    Sytem is ECC 6.0
    Regards,
    Mahesh

    Hi Mahesh,
    Table is USR03      User address data
    Check below link:
    http://abaplovers.blogspot.com/2008/07/sap-userand-authorization-systemrelated.html
    Thanks
    Sunny

  • Address details while saving the order

    hello experts
    i am having the requirement where i wanted to fetch the Ship-to Address details that is changed by the user while saving the order.
    I tried using different FMs like BAPI_BUPA_ADDRESS_GETDETAIL but these fetch the address from master data. What i want is the new address entered by the user.
    In CRM_ORDER_READ i am getting a new ADRNR for the newly entered address (itab_partner-addr_nr)but not able to find any FM to get the details out of it.
    did anyone know how to get the same?
    Thanks in advance.
    regards
    rajeev

    Hi,
    I tried FM BUA_BUPA_ADRC_GET. This one returns address details from memory but doesn't have partner relation in it.
    basically it populates partner's name into NAME1 field of ADRC.
    regards
    rajeev

  • Wireless user authentication detail at syslog server

    Hi Dear.  I configurated wireless network. i want to see my wireless user authentication detail(ip address, username and if it is possibly mac-address) at my syslog server. i do some configuration, the wireless controller send something to my syslog server but i need exctahly the user authentication detail.
    how i do that? please help me. thank you veru much.

    Hi dears. please help me

  • Group Policy to clear down MRU lists and to clear or to prevent user login details for programs such as Remote Desktop from being recorded

    Hi there,
    Please can anyone instruct me on how to set up Group Policy to clear down MRU lists and to clear or to prevent user login details for programs such as Remote Desktop from being recorded. Your help would be much appreciated.
    Kind regards,
    RocknRollTim
    P.S. I was redirected by a forum user off the Microsoft Community forum.

    Hi RocknRollTim,
    Agree with Jason. Using a script will be a better option.
    Just addition, for history of RDP Connections, please open Registry Editor and follow the path:
    HKEY_CURRENT_USER\Software\Microsoft\Terminal Server Client\Default. Please check if find MRU registry items where the name (or the IP address) of the terminal server is kept in.
    Please also follow the path: HKEY_CURRENT_USER\Software\Microsoft\Terminal Server Client\Servers. It contains
    the list of all RDC (remote desktop client) connections that have ever been established from this computer.
    When expand Server folder and select a node, you will see the UsernameHint key that show the name of the user connected by rdp.
    Please back up registry items to avoid unexpected issues before any operation.
    If any update, please feel free to let us know.
    Hope this helps.
    Best regards,
    Justin Gu
    Thank you for responding back Justin Gu and I agree with both you and Jason Miller that a script can easily achieve this task. Thank you all for your help.
    Many thanks,
    RocknRollTim

  • Address details of a BP

    Hi All,
            I want to get detailed address of a buisness partner like street,city country which are in the structure ADDR2_DATA.
    How can I fetch the data in CRM?

    Hi
    Use FM BUPA_ADDRESS_GET_DETAIL. Just pass Partner no to exporting parameter IV_PARTNER and u will get the address details in importing table ES_ADDRESS, tel no in ET_ADTEL, fax no in ET_ADFAX and email address in ET_ADSMTP.
    This works
    Thanks
    RR

  • How to populate address details in IDOC

    HI,
    I am creating customer master using OILDEB06 IDOC.
    However I dont see the fields like SMTP_ADDR, SORT1, Street 5 etc in the idoc segments.
    How do I pass all the address details along with my IDOC.
    Do I need to use some BAPI or am I missing something inMapping.
    Appreciate your help.
    Thanks and regards

    These are additional address fields which are part of 'Central Address Management'. Pasted below is the documentation associated with it. Basically, you need to add these separately.
    <i>
    Additional address fields:
    There are additional address fields available due to linking the customer and vendor master and the respective contact persons to central address management. This additional address information is stored in central address management's own tables rather than being kept in the actual master tables (KNA1 for the customer master, LFA1 for the vendor master, KNVK for the contact persons).
    A separate transfer run via the ALE interface is needed to transfer this additional address information. This run should be before the transfer run for master data.
    See Transfer of address data.
    If you use number ranges with internal number assignment when creating new customer and vendor masters, the number which is used to identify the master object in the system must be determined beforehand due to address information and master data being transferred separately.
    You can determine the numbers using the following BAPIs:
    BAPI_VENDOR_GETINTNUMBER (for the vendor master)
    BAPI_CUSTOMER_GETINTNUMBER (for the customer master)
    BAPI_PARTNEREMPLOYEE_GETINTNUM (for the contact persons)
    Master data fields for which there is a counterpart in central address management (such as name, street, or telephone number) continue to be filled in the actual master tables. The formatting for these fields within central address management is different from the original formatting of the fields without the link to central address management. We therefore recommend that you only transfer the data for such fields when transferring central address management address information.</i>
    Here is the documentation on transferring address data.
    <i>
    Transfer address data
    You can use the DX Workbench (transaction SXDA) to transfer address data.
    Create a transfer project using the following object types:
    BUS4001 for company and organization addresses (for example, customer address, vendor address, other office address of contact person)
    BUS4002 for private addresses (of contact person)
    BUS4003 for office addresses (composite work address of contact person).
    The address data is entered by the SAVEREPLICA-BAPIs of these three object types.
    For more information about these BAPIs and their interfaces, in particular the meaning of the key fields, see "Distributing addresses via ALE" by choosing Basis --> Basis Services/Communication Interface --> Business Address Services in the SAP Library.
    You can create example files for the DX Workbench from existing address records in the system (for example, in a customer master record ) with the programs RSDXBUS4001, RSDXBUS4002 and RSDXBUS4003. These example files show the meaning of all fields in the Business Address Services BAPI interfaces.
    The programs have the same input parameters as the SAVEREPLICA-BAPIs.</i>
    Please reward and close the post once answered.
    Srinivas

  • VIEW CUSTOMER ADDRESS DETAILS IN REPORT (TABULAR) FORMAT

    When maintaining the Customer Master, General Details such as Customer Name, Search Term, Address, City, Postal Code, Country, Telephone No, Email etc are updated in the General Data screen that is stored in KNA1.
    When I run report for KNA1 in SE16 - the system gives me Name, Search Term, Country, Telephone, City, Postal Code - nowhere it gives me a detailed report of address data stored in Steet 2, Street 3, Street 4
    How do I get the entire Street Address details against Customer Code?
    Please advise.

    Hi
    If you talking about SQVI query, just do a google search and you will find lot of help and guidelines to construct a query.
    In SQVI query you should link KNA1-ADRNR with ADRC-ADDRNUMBER and you should select KNA1-KUNNR, KNA1-ADRNR, ADRC-STREET, ADRC-CITY1 etc as output fields. Then it should give you the correct output.
    If you are talking about ABAP report, it should be similar to what is given below.
    SELECT STREET1, CITY1, .........etc FROM ADRC WHERE    
    ADRC-ADDRNUMBER = KNA1-ADRNR

  • User login details

    dear All,
    i want to check my store-4 users login details in sap, from last years, can you please help me to resolve the same.
    regards,
    jitendra.

    hi jitendra,
    You can use the User Information System (T-code SUIM) to obtain an overview of the authorizations and users in your SAP system
    at any time using search criteria that you define. In particular, you can display lists of users to whom authorizations classified as
    critical are assigned.
    Thanks & Regards
    Ajitabh

  • Sales Employee without HR - Maintaining Address Details

    Hi All,
    We are using Sales Employee without HR.
    When the Sales Employee is linked as a partner on a Sales Document, the address details are filled with "XXXX".
    Example:
    Name: Graham Shanks
    Street: XXXXXX
    Post Code: XXXX
    City: XXXXXX
    I want to be able to maintain the address, specifically the email address of the Sales Employee to setup an email output condition for the order confirmation.
    Please assist.
    Regards,
    Tim Reid

    Hi,
    Once you create sales employee without HR,then go to t-code,
    PAL3  or  PA30
    Select infotype text ADDRESS & click on create icon at TOP of leaft hand side
    Maintain the address detail and save it.
    My suggestion is take help of HR consultant, he will configure infotype for address.
    Kapil
    Edited by: Kapildev Farakte on Jan 6, 2010 5:17 AM
    Edited by: Kapildev Farakte on Jan 6, 2010 5:17 AM

  • Problem with "user data detail"

    Hi  I am using EDQ 9.0.6 in Window 7 platform.
    I need some support from the community on how to make "user data detail" tool work.
    As show in the picture in the link,
    http://img843.imageshack.us/img843/5985/vend.jpg in The datapane, there is no user data detail show.
    also as the result i am also unabe to make user notification by email work.
    I will be very much appliciate for all the help i can get.
    Thanks in advance
    Supanut

    Thank you for your helpful reply.
    I make a test and it is really as you and the help file stated.
    It is working on realtime data input.
    If you would be kind to help me more,
    My destination data table has a field named "UPDATE_USER" to record  name of who put  or update the data.
    Are there anyway to link EDQ username to be put in the output data so that non EDQ user know which of the edq user put the data in?

  • Bill to address details for PO form

    Hi,
    Can u get the table name and field name (name,other name,house number,street,city,postal code,country,country,tel1_number,extension) for fetching the details of BILL TO ADDRESS for PURCHASE order form

    Hi Jayasree,
    In PO bill to address is generally the Plant Address.
    Are you talking of SAP standard smartform ? If you have Bill to number then you can find the address details from ADRC table by using ADRNR (KNA1-ADRNR).
    Can you please be more specific on this.
    Lanka

  • Report to get Asset Line item details & user id details

    HI All,
    Is there any report to get Asset No, Assets line item details & user Id details.
    Thanks in advance.
    Ava

    Hi,
    which user ID? User created? User last changed?
    You can enhance any standard report with individual fields, see WIKI entry [Include additional fields in Standard Fixed Asset ALV reports|https://wiki.sdn.sap.com/wiki/display/ERPFI/IncludeownfieldsinFI-AAstandardALV] and/or SAP note 335065.
    User who created the asset is field ANLAV-ERNAM.
    Regards,
    Markus

Maybe you are looking for