User admin role

Hi All,
I want to assign a user, the user admin role. So I copied the standard user admin role to my folder and when I assign it to the user it gives me an error "NO ACCESS" - You have no permission to perform this action.
Can snyone please explain me in detail how to enable the permission so that the user has all the features of the user admin.
Thanks,
Regards
Michael

Hi Michael,
No need to copy to any other folder...goto systm admin -> permission -> portal permission -> open the portal content  and then give the full control permission for all the objects for wich u want to give access to end user and then finally assign him content admin role....doing this end user will see only those objects in his content admin role..
regards
Amit
P.S.   award points if u find this answer helpful...

Similar Messages

  • Not able to view the 'proxy-to-remote' iView under 'user admin' role

    Hi All,
    I am not able to view the 'proxy-to-remote' iView under 'user admin' role. I need this for Remote role assignment for FBN .
    I am using the portal version EP 7.0.
    Can anybody help me .
    Thanks & Regards,
    Amit Kade

    Hi, Amit
    u have to assign the one iview in User-Admin role
      Goto->Contentadmin-> portal content->content provded by sap->Admin interface->iview template ->select proxy to remote role iview.
    and this iview assign to user admin role the u can able to see.
    if its solve please give me 10 points
    thanks & regards
    chitta

  • Problem with using the import tool under User Admin role

    Hello,
    I have created a role through the import facility under the User Admin role:
    [role]
    ridpcd:portal_content/content....
    rdesc=my role
    Although I have recieved a successful message I couldn't locate this role, not when I was searching it in User Admin or under the pcd location where I asked to create it.
    I then imported a transport package from another portal that contains a role in the exact same pcd location, this time an actual role has been created.
    The problem is that when I try to use the import facility again to assign a group to this role I get: Error: Role found, but unique name "pcd:portal_content/..."  is not unique!
    When I search User admin for this role I get only one and when I go to this pcd location I only see one role so I don't understand this message  and how can a unique pcd location cannot be not unique.
    Any ideas...?

    Try performing the import again, but this time do not use the fully qualified pcd path. Just specify the rid without the pcd definition. In otherword if you did a search in the user admin for the role ID you would not use the full pcd:rid just the rid value.
    The alternative is to first delete the role and then import again. The reason you are gettign the problem is that the pcd generates a unique sid entry for the role and thus the manner in which you are performing the update using the full pcd path is not allowed. For this reason drop the fully qualified pcd path.

  • Customizing User Admin Role

    I am trying to customize user admin role. I copied the role to the custom folder. I made the Import and Activity Reports invisible. I assigned it to a test user. When I login as the test user I get the error saying You are not authorized to run the application. I did assign the user permission in the Permission Editor.
    It is a SAP EP 7 2004s install.
    Any help appreciated.

    Hi Michael,
    Check whether the end user "check box" is checked in the permission editor of the role for the appropriate user or group.
    Regards,
    Abhishek

  • User admin role questions

    Does one really have to individually give User Admin status to each user
    in order for them to be able to change their own data? I was not able to
    select a group to assign to the role.
    Also, having assigned users to this role, can they then modifiy any
    other user's info? (This seems to be implied by the docs.)
    Tia,
    Ken
    Ken McLeod
    The Delphian School
    http://www.delphian.org

    Ken,
    It appears that in the past few days you have not received a response to your posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com/ to search the knowledgebase and check the other support options available on that page under "Self Support" and "Support Programs".
    - You could also try posting your message again. Make sure it is posted in the correct newsgroup. (http://support.novell.com/forums)
    If this is a reply to a duplicate posting, please ignore and accept our apologies and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • Read-Only Role For User Admin

    Hi, I am trying to implement a role that would enable a user to have the same functionality as the out-of-the-box User Admin role, but that this user would not be able to actually create or modify users, roles assignments, etc.
    The idea is to have a 'Display' role - with read-only access.
    The solution we are comtemplating right now involves getting the source code from SAP, copying it, and modifying it - disabling any interaction. We would then create new iviews, pages, etc from there only for this role. This is a tedious task.
    Any ideas on how else this can be done?
    Thanks

    I have only managed to do this by creating a role and assigning the relevant User Admin iViews to the role and then changing the End User Permissions on the role.
    I assigned the ReadAll Premission. That did the trick for me.
    Groups unfortunately require the manage_groups Permission, so we do not allow the viewing of groups.

  • How to restrict Basis from User admin in Portal

    Hi,
    Iam looking to delete action Manage ALL action from Administrator role and add ReadALL so that basis is not given access to User admin in Portal. we already have Manage_All in a role that is assigned to security. However iam not sure of the problems. please advise if there would be any problem in tweaking the Administrator role as these are standard UME roles.
    Thanks in advance.

    Hi,
    Please try to modify User adminitrator role in the portal.
    Content Administrator>>Portal Content>>Content Provided by SAP>>Admin Content>>User Administrators>>Right click on "User Admin" role >>Permission>> IN "Everyone" Group, Uncheck the 'End User' column. then SAVE your permision.
    Hope this will helps you to resolve your issue.
    Thanks
    Arun Jaiswal

  • Help required for linking Organization Admin Roles to User Profile in R2

    Hi,
    We are using OIM 11.1.2.0 (Without any patch).
    Current Requirement:
    We have requirement to provide search capability to end users to search/see users of other Organizations in OIM.
    For example: I belong to Org1: UK, So OOTB OIM just support searching/viewing profile of UK Organization users. I can not search/view user info of Org2: Italy.
    To overcome this issue,Oracle has suggested us to add both the following roles in order to see user information of other organization.
    • User Viewer
    • Organization Viewer
    After just logged in using xelsysadm, I can able to assign Admin Roles of each organization to end users.
    We want some API info/ how to automate this assignment to Admin Roles(Which are available to Organization) to end users?
    We went through the APIs available for OIM 11.1.2.0, but could not find any API related to Admin Roles of OIM.
    Please suggest.
    Regards,
    J

    Hi,
    Has any one implemented this method?
    addAdminRoleMembership(oracle.iam.platform.authopss.vo.AdminRoleMembership membership) Add a admin role membership.
    Regards,
    J

  • XPRESS code to find all users with a specific Admin Role

    I've been playing around for a while with a way to get a list of all users that have been assigned a particular Admin Role. I have a role for which I want a specific subset of users to be approvers on it, and I want to greate a Rule that will check for people with a particular Admin Role and then return that list as people to be approvers on the role.
    I haven't been able to find an easy way to write this code. Anyone run across this before or have another suggestion???
    Thanks.

    Below is the code to find user based on condition.
    <set name='adminList'>
    <invoke name='getObjectNames' class='com.waveset.ui.FormUtil'>
    <ref>:display.session</ref>
    <s>User</s>
    <map>
    <s>conditions</s>
    <list>
    <new class='com.waveset.object.AttributeCondition'>
    <s>AdminRoles</s>
    <s>contains</s>
    <s>adminRoleName</s>
    </new>
    </list>
    </map>
    </invoke>
    </set>
    Edited by: Jay on Mar 7, 2012 4:03 AM

  • OBIEE 11g  - Not able to see existing reports which are created by specific owner but I could able to see Admin role user reports.

    OBIEE 11g  - Not able to see existing reports which are created by specific owner but I could able to see Admin role user reports.
    Appreciated if you could able to help as soon as possible as I don' have back up for these disappeared reports.
    Pleas let me know if any additional information needed.

    Hi
    Thank you for the reply.
    Here one thing I would need to mention that those are created by me on last week, but when I check those today, I could not able to see or even admin also not able to see those. For sure no migration and updations happend over the week end, really not able to debug whats the issue around. Unfortunately I haven't taken back up as well.
    Please could you help and let me know whats the root cause and how I could able to restore.
    Best regards,
    Kumar

  • How to Add Active Directory user to Admin Role

    Hi All,
    I am trying to figure out how to add a AD user to the Admin Role..
    I am connected to AD and can see the user (myself), however, when I try to add myself to the admin role, it says user not found.
    I go to Security Realms > myreals > Roles and Policies > Global Roles > Roles > Admin > View Role Condition.
    I see that the Administrators Group is already added. Now I click "add Conditions" and select "User" from the Predicate List and type in the user " Doe' John".
    On the next screen I get "user: John or Dow" does not exist.
    Another option could be to add the user to the Administrator group, but I couldnt figure out how to do that as well. When I navigate to the user under Users or Groups, I dont see an option to add that user to the Administrator group.
    Is it that you can only add users created in Weblogic to the Admin group?
    Any help on this will be very appreciated.
    Thanks in advance.

    I think I got it. I had to add the AD group the user is part of to the Admin role.

  • 5.0 created ISA user roles won't save in ISA user admin URL

    We just upgraded from 4.0 to 5.0, in config I assigned these roles & we can see them in the ISA user admin URL.
    SAP_CRM_ECO_ISA_WU_B2B_FULL
    SAP_CRM_INTERNET_CUSTOMER
    We can select them and assign to the box on the right and save, but when we go in they are on the left in the non assigned box.  Why won't they save?????
    The Z roles from 4.0 can be saved but they can't run ISA application as they don't have all the components.
    will give points.

    answer was security was not correct

  • Delegated user admin and export Roles&Groups ?

    Hi experts,
    I'am searching some tips in order to allow my users's delegated user admin group to export UME Roles and Group. however, my users met no problem to assign their roles to themselves
    I'am working on EP 7.0 sp14 and my UME is an abap system
    Can you give me some advice to go out from this issue ?
    Best regards,

    Hi experts,
    I'll try to complete my question:
    I've added Batch action to my delegated user role, but it's not enough to perform export operation.
    I hope if i can find a combination of actions without "Manage ALL" that i can assign to my delegated user role.
    Best regards,

  • Fetch Admin Roles from User Object

    Hi,
    I have user object from which I need to fetch name of all Admin roles a user is having.
    I tried this method - getExpandedAdminGroupRefs() but its returning me null.
    getAttribute method works fine with <s>firstname</s>
    <invoke ='getExpandedAdminGroupRefs'>
    <ref>userObj</ref>
    </invoke> --> null
    Along with this I also need all IDM capabilities that user is having and managed organizations.
    Can anyone help.
    Thanks in Advance :)

    Hi
    Not sure exactly where you are doing this from but there are reports in SIM that give you this information without writing any code.
    Admin role report
    Administrators report.
    If this doesn't suit you you could look at the code that runs these reports and maybe anser your code question there.
    Cheers

  • Assigning Admin role or any other role to Unity Connection user

    How do I assign a role to a user. I`ve given them the admin role as an example but can not log in . What is the GUI log on details I should use Alisa, Extension etc but no luck. The password I`m also using is the VM PIN I use to listen
    thanks

    Chris,
    I`ve sorted it now, I was looking for as separate ssection for PIN and password , I  didn`t realise that they are under the same heading but separated by the drop down menu - Web and VM application
    thanks for your help

Maybe you are looking for