User agent for Explorer 7

My bank's online banking site is requiring explorer, with 128bit encryption. I am assuming that his is explorer 7 only. By switching the user agent in Safari's Debug menu it will accept Safari as the browser but it wants me to upgrade to 128 bit encryption.
Is this something that Safari can do?
Is this something that Safari 3 beta can do?
Never mind the bank for now - I'm going to give them **** tomorrow.

Hi Greg
Doesn't sound like your bank is very Mac friendly. User Agent tries to convince the Bank you are using IE 7 - not very convincing based on the response you're getting.
Safari 2 and 3 are already at the highest level of encryption for browsers.
Do you have an Intel machine? - if so, you could install Windows XP. Otherwise, you'll need to use a PC, or talk to the Bank about their archaic web requirements.

Similar Messages

How do I change the User Agent for Safari on my iPad? I need this for a specific website for work.

How do I change the user agent for Safari on my iPad? I know how to do it on my desktop version, but I need it for my iPad.

You can rename the iPad here:
Settings - General - About - Name
For Siri make sure he has himself as a contact in the Contacts app then:
Settings - General - Siri - My Info and select his contact info

Sip User Agent for Pocket PC

Hi,
I want to create SIP user agent for Pocket PC, to enable users to make and receive telephone
calls to other users on SIP platform, and to and from the telephone network (PSTN).
I have read alot of articles, and looks like J2ME + JAIN sip is my solution.
So I just want to confirm that it really works for Windows Mobile 2003?
Is JVM available for that OS?
Thanks :)

sip useragent for pocketpc is not compatible with j9vm.

Trying to get Firefox to open in User Agent "Internet Explorer"

I run an Internet Cafe and have recently installed Ubuntu 10.04 over Micro$oft.
I HAVE to give customers an alternative to Live Messenger.
I have TokBox setup .. but gives problems now & then.
I need to cover all bases or lose customers.
The only viable alternative I have found is '''EBuddy'''.
Now the problem is .. when I log in using Internet Explorer and I connect to a contact - I can see the start video call "button".
Any other browser and the webcam button does not show.
All of the Firefox & Seamonkey User Agent Switchers I have tried work .. but I cannot expect the customer to know that they need to switch User Agent before they can use the webcam.
I need to Launch either Firefox or Seamonkey (preferably Seamonkey - if the fix is to be a permanent one) in Internet Explorer mode.
A permanent "fix" for Firefox was suggested on the Ubuntu Forum ...
1. Open about:config
2. Right-click, choose "New" > "String"
3. Type "general.useragent.override" (no parentheses) into the "New String Value" dialog box that appears and press "Enter." Type or copy and paste the desired new user agent string into the "Enter String Value" box (in this case "Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1)" )
When you're done, copy that Firefox profile to all of your computers (the .mozilla folder)
I tried this on Seamonkey .. but it did not have the desired effect = no start video call button.
There is a Proxy Tool add on for Seamonkey which can change the user agent and this works. Same thing for Firefox.
But the user agent is back to default on browser re-start.
In an ideal world I would like to create a Launcher on Ubuntu desktop which would open either Firefox or Seamonkey on the E Buddy sign in page and the User Agent would automatically be set to IE8 or 9.

Try to set the user agent via a user.js file.
*http://kb.mozillazine.org/user.js_file
user_pref("general.useragent.override", "<IE user agent>");

How to get iphones / ipad user agent for internet access

Hi.
We recently setup some wireless, and I'm wondering how I can get iphones and ipads connected to the internet without prompting for a username and password. Even if it does prompt and we put in our domain credentials, things don't work.. it's like it heavily restricts access. However if you put DOMAINNAME\ in front of your user name, then it seems to work.
Without making static IP reservations and attaching those ip's to no authentication in IronPort... isn't there a way to assign these devices to a policy via their user agent string? Problem is finding that string amongst different versions of iphones and ipads.
I visited www.ipchicken.com on my iphone and it said Browser: Mozilla/5.0 (iPhone; U; CPU iPhone OS 4_3_2 like Mac OS X; en-us)
AppleWebKit/533.17.9 (KHTML, like Gecko) Version/5.0.2 Mobile/8H7 Safari/6533.18.5
What part of this do I copy into the user agents field for my no autnentication identity that I'm trying to alter? I tried putting AppleWebKit in, but it still blocks almost everything.
Right now in this Allowed User Agents identiy i have Windows Update checked, as well as these:
(MSOffice\x2014)
Microsoft NCSI
SSLSoapClient
AppleWebKit (does not seem to work)
Thanks for the help!

I think I figured it out. Followed this closely:
https://ironport.custhelp.com/cgi-bin/ironport.cfg/php/enduser/std_adp.php?p_faqid=1426&p_sid=ODIeCGuk&p_lva=1713&p_li=cF91c2VyaWQ9MXJvblAwcnQmcF9wYXNzd2Q9Zm8wQmE1
Also do you guys know if the custom user agent field can accept wildcards? Problem is, every version of iOS for iPhone 1, 3G, 3GS, 4, and iPad 1 & 2, or ipod touch (various generations) all have variations in their user strings. If I could just do a blanket statement for like *iphone* , *ipad*, etc.... that would be easier.
So are there any wildcards or txt masks that can be put in and interpreted in the custom user agents field?

How to specify a custom User-Agent for an HTTPService call?

I'm trying to have HTTPService send a custom User-Agent
string in the request headers but it seems to ignore the header=""
method.
Is there any documentation on how to do this? Or would I have
to use URLRequest instead?

Hi,
The column's style classes will be added on the <td> elements, not the header sadly. So for your use case you'll have to place the class on the table itself then use the selector
af|table.MyStyleClass af|column.formHeader::header-text{}Sadly this will affect all columns, not just one so I don't know if it's going to fir your need.
Regards,
~ Simon

Firefox 3.6.16 is showing User Agent for Firefox 3.0.12

I am running Firefox 3.6.16 on Win7. However, the UserAgent shows Firefox 3.0.12. Why is this? Some of the web platforms I work with do not support 3.0.12.
I've even redownloaded and reinstalled 3.6.16, but the UserAgent remains 3.0.12. How can this be fixed? Are there any FF addons that would cause this?

https://support.mozilla.com/en-US/kb/websites+or+add-ons+incorrectly+report+incompatible+browser

Adobe Air Mobile User Agent Issue.

Hi,
We are working on the adobe air applications to handle multiple instance of mobile user agents. While doing so we observed that when a user agent
belonging to android/ios/windows/ mobiles web page objects/ui for mobile website is not loading as it was expected. To be precize some of the ui components
location is getting distorted. Please let me know the possible solution/fix for the same. Looking forward to hear on this soon.
PS: Same user agent when loading on firefox user agent addon, mobile web site opens properly without any issue.

DOES THIS MEAN YOU ALREADY ABLE TO USE A CUSTOM USER AGENT FOR AIR PROJECT ??
CAN YOU EXPLAIN HOW TO ADD CUSTOM USER AGENT ?

User agent

Hello everyone. I have bought passport recently. I switch from android device.
I have question about desktop user agent on the device. Although I have activated it some website still present the mobile form. (for exemple laposte.net)
I have tried several browser but the problem remains.
This problem was not present on my android device.
I assume I have something to set on my blackberry but I don't know what.
Could you help me to have ALL website with the normal layout please.

ajitkalu wrote:
Can any 1 help me to get the user agent for Nokia 5800 xpress music for mozila firefox.
How about: Mozilla/5.0 (SymbianOS/9.4; U; Series60/5.0 Nokia5800d-1/31.0.008; Profile/MIDP-2.1 Configuration/CLDC-1.1 ) AppleWebKit/413 (KHTML, like Gecko) Safari/413
Happy to have helped forum with a Support Ratio = 42.5

User-agent security "U" not in FF6 - why?

I looked at the user-agent for Firefox 6 and found that the U for high security level is not there any more. Why? Is it not needed any more? Is its absence likely to cause problems with secure sites?

That has been gone since Firefox 4.0.
That "U" really hasn't meant much since like 1996 when the US government lifted the export controls on software that used encryption. Under the old rules only US versions used the "U" for 128-bit, which I believe what the "U" represented - USA. Export version were restricted to 64-bit, IIRC.
As far as problems, I have seen a few support postings here about problems like that, and when I checked those web sites out I found ancient "UA sniffing" code being used. Code that was looking for IE4 and NS3 and 4, from over 10 years ago. Time for those websites to enter the 3nd decade of the 21st century.

Is there a way to change my user agent from Safari to Internet Explorer?

Hello All,
I need to fill out a application on line and it appears that it does not recognize Safari. Sounds like it needs to see IE. Anyway to temporarily enable IE for this application? Otherwise I have to go use a PC at the local library....
These instructions below in no way match my Snow Leopard 10.6.8 on my iMac - they don't make sense to me. Any help/guidance is appreciated to fill out this on-line form. Thanks!
Apple Safari
If using Safari, you must have Internet Explorer 6.0 or higher version or Firefox 2.0.0.12 - Macversion web browser at the "User Agent" category or higher for Firefox. Use the following instructions to configure your Safari browser to access e-QIP.
On the Menu Bar
Select Edit box (top of screen)
Preferences
Security
Accept Cookies (only from site that you navigate to)
Advanced
Check the box labeled "Show Develop Menu in Menu Bar"
Click proxies - Change settings box (Opens to Internet Explorer (IE) Properties Boxes)
Advanced tab
Security category is located near bottom of page
Click "Do not save encrypted pages to disk"
Click "Empty Temporary Internet Files folder when browser is closed"
Click/enable SSL 2.0
SSL 3.0
TLS.1
Exit Preferences Window
On Menu Bar select "Develop User Agent"

John..
This may work but no guarantees ..
Launch Safari. From the Safari menu bar top of your screen click Safari. From the drop down menu click Preferences then select the Advanced tab.
Select: Show Develop menu in menu bar
Now from the Safari menu bar again, click Develop > User Agent
Try IE 7, 8, or 9.

Configuration issue in IE as Document mode: 10 and User agent String: Internet Explorer 8

Hi,
I have a telerik rad popup window performing some input operation. The problem is when I use the configuration in IE as Document mode: 10 and User
agent String: Internet Explorer 8, scroll bars appear in the window from nowhere. It is working fine with every other configuration of IE. I've also used a separate stylesheet for IE 8 but it won't apply in this case.
Here are the screen shots of the window.
Actual view
With Scorllbar
Please if anybody could suggest a solution for this weird problem it would be a great help.
Thanks in advance.
Neelesh

Hi,
It seems we need to talk with the site developers to determine how the sheet would display with different IE user agent string.
Regarding the user agent string changes, please take a check with the following article:
Introducing IE9’s User Agent String
The Internet Explorer 8 User-Agent String (Updated Edition)
Hope this may help
Best regards
Michael Shao
TechNet Community Support

Internet Explorer 11 - Emulation Document Mode and User Agent String Drop Down Menu Blank

Hey
I have a user who has a problem with Internet Explorer 11 where when you go to emulation mode using F12, the Document Mode and User Agent String Drop Down Menu are both blank. On our internal website its works correctly but on all other external websites
they are both blank.
I have had a look at the link below but this did not help as it would not recreate some of the registry keys.
http://answers.microsoft.com/en-us/ie/forum/ie11-iewindows8_1/document-mode-and-user-agent-string-dropdowns/cd34d5f8-7839-4083-af55-05d49ba85190?rtAction=1387560713451
Charlie

Hi,
Please include links to any websites that you are having issues with your questions.
There are some known reasons why the documentMode dropdown appears blank...
not all websites though should have the conditions for this.
f12>Console tab, refresh the page to show suppressed error messages and warnings... (documentMode x-ua toggling is listed)...
IE11 includes improvements for XSS... to link to internet sites from your intranets you need to add those sites (If you really, really trust them) to the Trusted Sites list.
the developer console will list blocked xss requests.
by default IE11 runs in EPM.... in the Internet Zone, while it is not switched on for the intranet zone....
EPM only allows 64 bit Addons and ActiveX controls to run in the context of an IE tab...
so its highly likely that one of your Addons is causing the issue.
the first step in troubleshooting IE issues is to test in noAddons mode.
Regards.
Rob^_^

IE11 browser difference between "Default" and "Internet Explorer 11" user agent string

I installed IE11 in my machine .And also we migrating all our developed application (ASP .Net/ VS 2010) to work in IE11 .
But when i open (Developer tool (F12) -> Emulation) In that ,
While selecting "User agent string" i two different option
Default
Internet Explorer 11
Actually what difference between this two user agent string and too i am working in .Net
And i select "IE11" as a user agent option , most of my application working flawless (design) but if i select "Default" throwing lot of design oriented bugs.
Is there setting to be made in .Net framework or anything else
Because it should work in both "Default" and "IE11" user agent string

Hello kumaran_Arun,
Please try to reset Internet Explorer and check if the issue still exists.
http://windows.microsoft.com/en-hk/internet-explorer/reset-ie-settings#ie=ie-11
If this issue is related to Internet Explorer web development, to receive better support, it is recommended to post in the MSDN forum.
The professionals there will be glad to help you.
https://social.msdn.microsoft.com/Forums/ie/en-US/home?category=iedevelopment
Thanks for your understanding.
Best regards,
Fangzhou CHEN
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

ISE redirect to install NAC Agent for Anyconnect users with Split Tunnel?

Due to management directive I am not able to disable SPLIT TUNNEL for our VPN users. For this reason, I can not figure out how to enforce the REDIRECT to ISE for forcing the VPN users to install the NAC AGENT.
Is this possible? If so can we get some documentation on how this is done? Screenshots would be great.
Thanks,
Dirk

I couldn't find the answer that I seek in that doc.
I am trying to see if I can force traffic to the redirect for installing the NAC agent, even on split tunnel traffic....perhaps forcing the first webpage the user opens forces the user to the redirect page if the NAC agent isn't detected.
Thanks,
Dirk

User agent for Explorer 7

Similar Messages

Maybe you are looking for