User and PWD in Repository
When a create user and groups in the BI EE Repository, is there any possibity for EndUsers to change there own PassWorD?
Regards,
Stefan
Hello Stefan,
the answers is: Yes and No!! LOL
There's a way to enable the end-user ability to change there own password (for more information, read the "Oracle Business Intelligence Presentation Services Administration Guide" on page 173, item "Enabling User-Initiated Administration Actions").
But, this feature have a bug (for more information, read Metalink Bug 6338972: OBI CHANGE PASSWORD FEATURE LOCKS USER OBJECT IN RPD).
Similar Messages
-
I have opened iCloud from setting on my iPhone, it accepts the user and pwd but then freezes at the terms & conditions page
Try deleting the account, then signing back in.
-
Creating Adaptive RFC model without logon name and pwd?
Hi All,
I have this requirement where when I log on to an application I need to get a mapped user name and pwd from EP and then connect to the R/3 system.
However, you cannot create a Adaptive RFC model without username and password. So i needed to know if this can be done in some other way.
Thanks,
Malitahi
To my understading , you need user and pwd created for your portal and call the RFC or Bapi .
Hope this is possible .
Creating the users and pwd for the portal for your application is possible , but parallelly
calling the RFC with same user name and pwd i hope its not , as you have to deploy the application
which created the userid and pwd , then call the RFC ,
and for more you can provide more information what exactly is your requirement . -
Can i drop the connection user and schema used for Accociate repository
Hi
I have created a connection , user and schema and Associated repository to it then migrated a database from diffrent product. to oracle
using the above mentioned connection, user ,schema and asscociated repositroy.
11g XE.
can i delete it after the migration.
yours sincerely.Yes you can !. Permission to drop those artifacts is granted except the target schema where the converted objects are. The migration repository user/connection can be dropped.
-
OBIEE+ Where do I assign user and group mappings to the repository objects?
Hi
I'm using the Oracle BI Administration Tool and I'm creating users and groups. Where do I map my users and groups to the repository objects?.
Regards,
Néstor BoscánHi,
I was reading your reply for this post. Could you please tell me in which tool you set the User security. I couldn't find Repository Admin in BI Administration tool.
Repository Admin > Manage > Security.
Any help would be appreciated.
Thanks in advance,
Ravi -
Sap installation and configuration procedure,its user id and pwds to access
hi ppl...
hope u r doing best help with ur career (may be) as well as knowledge on SAP...
I am actually trying to install SAP-Ecc 6.0 in Home PC(Laptop i mean)...
i have Windows XP ....As of now i just have SAP-GUI installed..but i need the server(IDES or any log on details)...to work and play around(practice or have hands-on)...which application server(create a logon pad) and clients(login and pwd) to use...any free source exists...just to work on SAP..
Even i heard in Minisap or IDES...less tables and datas are only stored...say only 'sflight' like tables will be there..or even some display mode only(access to many TCODES)..
so is that any suggestions to configure or customize ourselves..to work and improve our knowledge?
I was a developer...now home-maker...but would be good if i can play around and develop my interest on SAP-ABAP...
can any one of u, pls do help me out to get server details(for entering in SAP-GUI) and its clients as well as password(development,testing,etc...TCODEs where we can create/display/change,etc.. mode access)....?Check out this Links.For more go to help.sap.com and search.
http://help.sap.com/saphelp_erp2005/helpdata/en/c6/811e70ec5811d1801c00c04fadbf76/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/87/4d5739d335a85ee10000000a114084/plain.htm
http://help.sap.com/saphelp_nw04/helpdata/en/70/579502a7c611d3961700a0c94260a5/content.htm
Thanks
Govind. -
XI standard users and the passwords?
Anyone with a list of all the standard XI users and their standard password?
Hi Rune,
The XISUPER user has a pwd of XIPASS.
The following service users are created during the installation, and the passwords are specified at that time. You should check with the basis people.
XIREPUSER - User for the Integration Repository
XIDIRUSER - User for the Integration Directory
XIAPPLUSER - User for sender applications
XIRWBUSER - User for the Runtime Workbench
XILDUSER - User for the System Landscape Directory
XIISUSER - User for the Integration Server
XIAFUSER - User for the Adapter Engine (communication between SLD, Integration Server, and Adapter Framework)
LSADMIN - User for the Change Management Server
Cheers
Manish -
RE: Cleaning and Compression Environment Repository
Mark,
I'm not sure what I did wrong the first time. I thought I
covered all the bases, but just to be certain, I did the
whole sequence again and now it works.
Before, I did have problems restarting the environment,
because the repository was locked. I had to kill a
hanging process to solve the problem. Most likely
it was this process that was interfering with my original
attempts.
With this script, you offered some very usefull infor-
mation. Where did you get it? Like I said in my
first posting, I couldn't find any documentation.
The "help" function of "envedit" doesn't show any of
the commands you used. No way, you stumbled
on this by accident.
Thanks,
Pascal Rottier
STP - MSS Support & Coordination Group
Philip Morris Europe
e-mail: [email protected]
Phone: +49 (0)89-72472530
+++++++++++++++++++++++++++++++++++
Origin IT-services
Desktop Business Solutions Rotterdam
e-mail: [email protected]
Phone: +31 (0)10-2428100
+++++++++++++++++++++++++++++++++++
/* Ever stop to think, and forget to start again? */
-----Original Message-----
From: [email protected]
[SMTP:[email protected]]
Sent: Wednesday, June 30, 1999 1:04 PM
To: [email protected]
Cc: [email protected]
Subject: Re: Cleaning and Compression Environment Repository
The script mentioned is the exact sequence of commands that should be
used.
Did you shutdown the environment first? You cannot clean an environment
repository while the environment is online. I know that these commands
work for both NT and Unix environment managers.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>-
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>Mark,
I'm not sure what I did wrong the first time. I thought I
covered all the bases, but just to be certain, I did the
whole sequence again and now it works.
Before, I did have problems restarting the environment,
because the repository was locked. I had to kill a
hanging process to solve the problem. Most likely
it was this process that was interfering with my original
attempts.
With this script, you offered some very usefull infor-
mation. Where did you get it? Like I said in my
first posting, I couldn't find any documentation.
The "help" function of "envedit" doesn't show any of
the commands you used. No way, you stumbled
on this by accident.
Thanks,
Pascal Rottier
STP - MSS Support & Coordination Group
Philip Morris Europe
e-mail: [email protected]
Phone: +49 (0)89-72472530
+++++++++++++++++++++++++++++++++++
Origin IT-services
Desktop Business Solutions Rotterdam
e-mail: [email protected]
Phone: +31 (0)10-2428100
+++++++++++++++++++++++++++++++++++
/* Ever stop to think, and forget to start again? */
-----Original Message-----
From: [email protected]
[SMTP:[email protected]]
Sent: Wednesday, June 30, 1999 1:04 PM
To: [email protected]
Cc: [email protected]
Subject: Re: Cleaning and Compression Environment Repository
The script mentioned is the exact sequence of commands that should be
used.
Did you shutdown the environment first? You cannot clean an environment
repository while the environment is online. I know that these commands
work for both NT and Unix environment managers.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>-
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/> -
Multiple users on same work repository
We have work repository on a central machine and multiple users are accessing by creating separate logins.As we are accessing the repository remotely we created separate agents for each user and kept the agent running for each user on the central machine.
Although execution works when only one person is executing,but if some other person executes using his agent,we are getting the following error
Listener refused the connection with the following error:
ORA-12519, TNS:no appropriate service handler found
even though we are working on separate objects.We also tried creating separate users (other then the default SUNOPSIS USER) in the security manager but we are facing the same problem.
Please let me know if there is a away for multiple users to execute when working on the same work repository.Yeah I am also facing the similiar kind of problem please reply..
-
What's the Name and PWD in JCO Creation ?
Hello All,
I want to create a JCo Connection.
These are the steps which I've followed :-
1. Logged on to the Portal with username and PWD.
2. Went to the WebDynpro Tab.
3. Clicked on Create JCo Connection
4. Entered the details :-
NAME : Test_Meta_Data
Client : 800
<b>Note: I gave the client number of the SAP backend system . Is it right ?</b>
5. J2EE Cluster : I have only one server in the DropDown and it's already selected.
So I choosed the next step.
6. Connection Type : DICTIONARY META DATA
7. Application Server Connection :-
Message Server : Only one server I have in the DropDown and so I selected that.
8. Security :
Use Method : USER / PASSWORD
Name : sapuser
PWD : server
Confirm PWD : server
SNC : OFF
9. Finish.
When I press Finish I'm getting a message :-
" failed to create a new JCo Connection Test_Meta_Data
Error while obtaining JCo Connection. "
Can any one help me in resolving this ?
Regards,
Deepu:kHi Deepu,
Firstly,
Yes, The details u enter while creating JCO connection are for the SAP system,
So <i>Client, UserName, Password</i> are for SAP system(Backend) you are creating JCO for.
Secondly, About the error u r getting,
Error says " failed to create a new JCo Connection Test_Meta_Data"
that means the SLD user has not sufficient authorization to create JCO.
In Visual Administrator, in <b>SLD Data Supplier</b>
You would have given SLD connection settings, there you have to give the user which has sufficient authorization<i>(Admin authorizations)</i> to create JCO connection..
Check the current user given in <b>SLD Data Supplier</b>.
Hopefully your problem will be solved.
Regards
Deepak -
External Web Service - User and password in HTTP header
Hi!
How is it possible to add user and password in the HTTP header in a external web service call?
I have created a "Portal Service from WSDL file - Client side" with the wizard in SAP Developer Studio. I following the Java Development Guide - Web Service Security, and use the <i>secured service connection</i>. I have also created a new <i>System Landscape</i>, but should the new system be based on HTTP, my own PAR or what?
How can I check that the user and password is added to the HTTP header or the SOAP envelope? Do I have to scan http traffic with a proxy as Paros or can I find the request sent from SAP EP in the logs?
Cheers
AsleHello All,
I have been struggling a bit while putting a reasonable security framework on a jax-rpc style web service. I'm using JWSDP1.2 to set up the webservice. I've tried to outline my problem below. Please correct me where I'm wrong.
I've been through the Sun's WS tutorials, but they are not really clear on security. However, from them I surmised that there are two decent authentication techniques. HTTP Basic and mutual authentication (MA) . Both have their drawbacks though. HTTP Basic suffers from poor encryption while MA is a bit difficult to set up on both client and server sides. Another problem with MA is that there is no central repository for users/passwords.
OK, what I would really like to do is use my own user database to verify users/passwords i.e. use a HTTP Basic like authentication (but at application level) but run it over SSL for encryption. It seems simple, but is it possible?
Also, I have noted that when I use HTTP Basic on the service side, and use a java client, then setting username/password has no effect. In other words, I can always access the web-service, even with wrong username/password.
Sorry for the long post. Hope someone can help. Thanks. -
5 doc type and 2 content repository
Hi
I have 5 document type in DMS and 2 content repository.
Doc type QWE, ASD, JKL - pdf files must be in content repository X
Doc type ABC, BNM - pdf files must be in content repository Y
How should I proceed to do this?
RegardsHi,
if I understood your latest information correctly your request is that the files are stored automatically to storage category if you add a file to a document info record and save it. To achieve this behavior the first important setting here are the flags "Checkin" and "Checkin required" which are already set for the used
document status.
This first setting enables the automatic start of the checkin process. But to have a specific storage category choosen for an original workstation application, you have to do another setting and create a profile in your system in the customizing under
- Cross Application Components
- Document Management System
- General Data
- Define profile
For this profile pleasee add your workstation applications under "Determine definitions for applications". Here you can maintain the default storage category for this application in field 'Storage cat.'. Since this profile is created assign it to all your users directly. Then if an user adds a new original file and chooses a workstation application the system should take the storage category automatically from the profile.
Another proposal would be to use the BADI DOCUMENT_STORAGE01 which should offer also methods to control which storage category should be taken for which workstation application. I hope that this information could be useful for you. To set up this scenario in detail I would recommend you to contact your local consulting organization too which will help you in realizing a solution that meets all your requirements.
Best regards,
Christoph -
Problem in getting Portal Mapped user and password in Web Dynpro iView
I am developing a webdynpro iview.My app need to read mapped user and password form a system in Portal runtime.
I used the following codes in my Web Dynpro java program:
IWDClientUser user = WDClientUser.getCurrentUser();
IUser iuser = user.getSAPUser();
IUserMappingService iums = (IUserMappingService)WDPortalUtils.getServiceReference(IUserMappingService.KEY );
// IUserMappingService iums = (IUserMappingService)
// PortalRuntime.getRuntimeResources().getService(IUserMappingService.KEY);
IUserMappingData iumd = iums.getMappingData (systemalias, iuser);
Map map = new HashMap ();
iumd.enrich(map);
String userid = (String)map.get( "user" );
String pwd = (String)map.get ("mappedpassword");
I've add a sharing references in project properties,the value is "PORTAL:sap.com/com.sapportals.portal.prt.service.usermapping.IUserMappingService"
But when I run the iview on my Portal, it goes wrong, the message is:
com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to prepare application ''local/HomePage'' for startup. Reason= Clusterwide exception: Failed to start dependent library ''com.sapportals.portal.prt.service.usermapping.IUserMappingService'' of application ''local/HomePage''. Status of dependent component: STATUS_MISSING. Hint: Is the component deployed correctly on the engine?
at com.sap.engine.services.webdynpro.WebDynproContainer.prepareStart(WebDynproContainer.java:1490)
at com.sap.engine.services.deploy.server.application.StartTransaction.prepareCommon(StartTransaction.java:231)
at com.sap.engine.services.deploy.server.application.StartTransaction.prepareLocal(StartTransaction.java:184)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesLocal(ApplicationTransaction.java:365)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:117)
Anybody can help me?And are there anyother methods can get mapped user and password of Portal systems in Web Dynpro JAVA.Hi Wayne,
Did you added com.sap.security.api.jar to your webdynpro project. if not follow this steps.
1. Right-click the project in Eclipse or SAP NetWeaver Developer Studio.
2. Select Properties.
3. Choose Java build path -> Libraries -> Add Variable -> Select variable WD_RUNTIME -> Extend -> com.sap.security -> lib -> com.sap.security.api.jar.
I hope this should solve your problem.
Regards, Suresh KB -
Question: How to create new user and schema in 11g?
Who can give me answer how to create a new user and schedule?
I had installed oracle 11g DB and oracle client in my windows OS. I found in the 11g there is no enterprise manager console with new version. It is different from with oracle 10g.So i don't know how to create it new user.
I had created new DB instance, but i don't how to create a user on that. Who can give me a hand for that? I hope one oracle experenice expert give my answers.
Thanks a lot!
Edited by: user774630 on Oct 27, 2008 10:01 PM
Edited by: user774630 on Oct 27, 2008 10:09 PMHi,
I am not sure that which option you are talking about? Are you using the EMCA,http://download.oracle.com/docs/cd/B28359_01/server.111/b28319/emca.htm#SUTIL800] to create the new repository for the EM? If not the command line than the other only way is to use DBCA(Database Configuration Assistant).I believe you are talking about that. Yes ,if the message is coming creating the repository than after wards you can login to the EM. You would get the port no of the EM's HTTP port from the $OH/install/portlist.ini file.
HTH
Aman....
Edited by: Aman.... on Oct 28, 2008 11:36 AM
Gave up, link insertion doesn't work. -
Hi.
I'm looking for the way to make a report from the BO 6.5 repository that has the user and the group where he is registered.
Have someone done a query like this?
Thanks in advancedselect usr.m_actor_c_name as USUARIO,B.M_ACTL_N_ACTORTYPE,
CASE WHEN b.M_ACTL_N_ACTORTYPE = 1 THEN 'COMPANY'
WHEN b.M_ACTL_N_ACTORTYPE = 2 THEN 'GENERAL SUPERVISOR'
WHEN b.M_ACTL_N_ACTORTYPE = 4 THEN 'SUPERVISOR'
WHEN b.M_ACTL_N_ACTORTYPE = 8 THEN 'DESIGNER'
WHEN b.M_ACTL_N_ACTORTYPE = 12 THEN 'SUPERVISOR DESIGNER'
WHEN b.M_ACTL_N_ACTORTYPE = 16 THEN 'USER'
WHEN b.M_ACTL_N_ACTORTYPE = 32 THEN 'DS'
WHEN b.M_ACTL_N_ACTORTYPE = 64 THEN 'VERSATILE'
WHEN b.M_ACTL_N_ACTORTYPE = 128 THEN 'CMDSETTING'
END AS NOMBRE,
usr_grps.m_actor_c_name as GRUPO
from obj_m_actor usr,
obj_m_actorlink usr_link1,
obj_m_actorlink usr_link2,
obj_m_actor usr_grps,
OBJ_M_ACTORLINK B
where usr_link1.m_actl_n_actorid = usr.m_actor_n_id
AND usr_link1.m_actl_n_fatlinkid = usr_link2.m_actl_n_id
AND usr_link2.m_actl_n_actorid = usr_grps.m_actor_n_id
AND usr.M_ACTOR_N_ID = B.M_ACTL_N_ACTORID
AND usr_link2.m_actl_n_lat != 1
AND usr_link1.m_actl_n_lat != 1
AND usr_link1.m_actl_n_actortype != 1
AND usr.m_actor_n_lat != 1
AND usr.m_actor_n_type != 1
AND UPPER(usr.M_ACTOR_C_NAME) LIKE 'MX%'
Edited by: Manuel Morales on May 21, 2009 11:31 PM
Maybe you are looking for
-
Updating my ipod touch version 5.0.1
Hi, i want to update my ipod touch (4th gen) to 5.1.1 so connected my device to itunes and it asks me to update it so i chose download and update. when my download began, i noticed that it's 750mb, and my dsl is a little bit slow (downloading that la
-
Issue creating WBS using BAPI_BUS2054_CREATE_MULTI
Hi All, I am trying to create WBS elements under existing project (CJ20N) using BAPI_BUS2054_CREATE_MULTI. I am I am getting ET_RETURN with message type S-W-I, even after commit no WBS created. Type S message says Individual check for creati
-
Materialized View UNION different tables 10g.
I am trying to create a materialized view from 2 different tables. According the documentation for 10G it should be available. Here is my script. DROP MATERIALIZED VIEW PERSON_MV_T16; CREATE MATERIALIZED VIEW PERSON_MV_T16 refresh complete on demand
-
How do I Customize RoboHelp 11 Responsive HTML5 to include repeating background image?
Hello, How do I add a repeating background image (not logo) to the layout found in RoboHelp 11 Responsive HTML5? Is this something that has to be done inside of Dreamweaver? Where are the RoboHelp 11 Responsive HTML 5 default themes (skins) stored on
-
CSCuq96905 - Support spaces in Agent Names
Also have to notice that WFO Recording Controls is having the same issue. Calabrio had fixed this for service release 10.5 SR4 ES1. Expecting to have a fix for this soon on the UCCX platform.