User Approver doesn't receive the BID after WF Approval.

Hi Experts,
I'm facing a problem.
In the DEV enviroment I'd implement the WF for BID (BUS2202) appoval n-steps. After BID is acept the WF trigger and send the BID to user approver INBOX.
After I'd transporting this developed to QA enviroment, but with a difference, after i found a user approver the his doen't receive the BID in his Inbox.
Anybody knows how I can solve that?
Thanks.
Rgs.
Paulo Afonso Cordeiro.

is the currency for WF same in both the enviornment in SWB_COND?
also check the resp WF with TXNx
SWUD
SWDD
for active versions
sometimes installation errors cause inconsistncies in WF
BR
Dinesh

Similar Messages

I run Windows 8.1. I have received the result after several attempts uninstalling and reinstalling iTunes, "ITunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 127)" What can I co?

I run Windows 8.1. I have received the result after several attempts uninstalling and reinstalling iTunes, "ITunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 127)" What can I do? to solve the problem. Tried to clean the windows registry, no change. Very frustrating. Any advice is much appeciated.
Thanks.

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

HT204380 When I try to FaceTime my sister, she doesn't receive the call on her end, but if she facetimes me I always receive hers. Is this a problem on my end or hers?

When I try to FaceTime my sister, she doesn't receive the call on her end, but if she facetimes me I always receive hers. Is this a problem on my end or hers?

Have her check her "You can be received at ..." settings (Settings/ FaceTime) to see what she's set up as the points of contact to reach her via FaceTime (can be one or multiple e-mails or a phone number). Perhaps you're trying to FaceTime her on an e-mail or phone number which she's not using for FaceTime.

If I am connected to Wifi and send an iMessage to a party that is not connected to the Internet then he doesn't receive the message. How do I force my iPhone to send an SMS instead?

If I am connected to Wifi and send an iMessage to a party that is not connected to the Internet then he doesn't receive the message. How do I force my iPhone to send an SMS instead?

It is an interesting option but I am not sure how it works. I disconnected the other party Wifi and 3G on the iPhone, iPad and computer. I sent the iMessage 15 minutes ago and it doesn't give the small foot print "delivered" but equally said I didn't get the RED exclamation mark on the right hand side of the message in BLUE. So we know that the message was sent but not delivered. I don't seem to have the option of sending by SMS when I tap on the BLUE message and hold.

Doesn't print the checks after i input them on a document (adobe reader xi)

Doesn't print the checks after i input them on a document

It's possible the fields were set not to print... Impossible to say for sure without seeing the file.
Also, which version of Reader and which OS are you using?

Super users able to approve but not receive the alerts.

Hello,
When our customer logs into SAP Business One they get loads of alerts regarding approvals as they are in the approval list.
The customer was asking, if they remove themselves from the list of approvals so that they do not get the alerts. As a super user could they still be able to go into approvals to approve. The user was a super user.
This was tested, the result of which showed that if they were to take off their approvals they would not get the message but also they would not be able to approve either.
The customer suggested that this would be a useful addition to SAP if super users could go in to approve but not get all the alerts related to approvals.
Regards,
Andy

Hi,
Account to your description, one your test Exchange account
with POP mode cannot receive emails. If I misunderstand your meaning, please feel free to let me know.
If yes, I’d like to confirm if the issue happens internally or externally. And I also recommend the following troubleshooting:
Check if it can receive emails when you configure the account without POP or IMAP mode.\
Restart your IIS.
Check if the issue happens on others.
Thanks,
Angela Shi
TechNet Community Support

Haven't received the certificate after registering AppleCare

Hello,
I've just registered my MacBook for AppleCare. I looked on the Apple warranty-checker and the dates have been extended as appropriate.
However, I have not received an email confirmation from Apple that this has been done. I am talking about the email that's called the "certificate", telling me that I'll also get one in the mail soon.
What should I do?
I doubt I entered the wrong address. My friend who also recently registered AppleCare in the UK the same way I did received the email only minutes after activating AppleCare.
Thanks in advance!
Hope you can help!
I can't seem to find an email address (or form) to contact Apple with; and I don't want to spend money calling - yet.

I called them, and they fixed it. Though, I had to pay for the phone call in the UK.

Setting from address on linux to receive the mail after shell script ran

Hi,
I scheduled some shell scripts on Linux as cronjobs. Once the shell scripts are executed at the scheduled timings i am receiving the mails as shown in the below. PRDORA, TSTORA, DEVORA are my environments.
From     Subject     Size     Received
oracle     dbora01cocen.corp.psi:PRDORA RMAN Archive Completed using Control file     11 KB     Wed 8/13
[email protected]     TSTORA:[14]ORA-12012: error on auto execute of job 854     10 KB     Wed 8/13
[email protected]     DEVORA:[7]ORA-12012: error on auto execute of job 1524     68 KB     Wed 8/13
In the FROM address:
I should receive the mail format: oracle@hostname in the FROM address like shown below.
From     Subject     Size     Received
[email protected] PRDORA01 RMAN Archive Completed using Control file     11 KB     Wed 8/13
[email protected]     TSTORA01:[14]ORA-12012: error on auto execute of job 854     10 KB     Wed 8/13
[email protected]      DEVORA01:[7]ORA-12012: error on auto execute of job 1524     68 KB     Wed 8/13.
Rightnow this dbora01cocen.corp.psi is mixing up with the subject in PRDORA instead it should in the FROM address. Can anyone please guide where i am suppose to make modifications in order to get this change.
Thanks

Sorry for the Late Reply.
What does:
$ /bin/hostname
return for each of these environments?
FOR DEV:
[email protected][DEVORA01]% /bin/hostname
devora01coden.corp.psi
FOR TEST:
[email protected][TSTORA01]$ /bin/hostname
testora01coden.corp.psi
FOR PRD:
[email protected][PRDORA01]$ /bin/hostname
dbora01cocen.corp.psi
Are you using a local DNS or /etc/hosts entries to assign host names to IP addresses?I am not sure about this but i looked at /etc/hosts in each server and found the entry of the individual server on all the 3 servers.
Thanks

Java preferences window doesn't show the tabs after jdk 7 update 7 installations

java preferences window doen't show the tabs after jdk 7 update 7 installations, before the installations of jdk 7 u7 the tabs in the java preferences window were visible

Then, dump Chrome or uninstall Java 7u7 and connect back tol Java SE 6:
Q: Can I restore Apple Java 6 after uninstalling Oracle Java 7?
A: Go back to Apple Java 6 using the following instructions:
Uninstall Oracle Java 7 by deleting the plug-in file. From a Terminal window enter:
sudo rm -rf /Library/Internet Plug-Ins/JavaAppletPlugin.plugin
Create a symlink using the following command, entered on a single line:
sudo ln -s /System/Library/Java/Support/CoreDeploy.bundle/Contents/JavaAppletPlugin.plugin /Library/Internet Plug-Ins/JavaAppletPlugin.plugin

The wf_notification_out table says that the FYI notification has been sent but the email address that is setup to receive it doesn't receive the notification

Hi All,
We have developed a custom AME approval hierarchy for iRecruitment.
The hierarchy includes delivering FYI notifications as well.
The FYI notification gets generated we can see the FYI notification when we login to oracle apps.
But it is not getting delivered by email.
When we checked wf_notification_out table, it says it is sent.
Can anyone please help us on this.
Thanks,
Srikanth

So help me understand here... Some system sends an email with an attachment to a SharePoint email-enabled library, saving the attachment. This occurs each morning. You then want the SharePoint library to send you an email after each time this happens?
Why not just set up an alert on the library instead of workflow? Or have the source system send out the alert as well?

How can receive the ACL after run VI.

Hi all
I created the VI with controls.
Every control has ACL.
Then I run VI.
How can I know about ACL when the VI was ran?
Respect
Iskander

Hi Iskander,
Thank you for getting back to me with an example project. Could you please answer some more of the questions I asked in the last post?
1) What steps did you follow to create your access control lists?
2) You say you have Access Rights for controls in your project. Could you please clarify what controls you're talking about, and how the access rights were applied to each control?
3) What will you be connecting the access rights to at the output? Will they be used as an input for another function, or are you going to wire them up to another VI?
Once I have a better understanding of how your application is set up and what you're trying to accomplish I can do more research into resolving your issue.
Thank you,
Emily C
Applications Engineer
National Instruments

Program Doesn't Execute The Code After PrinterJob Is Exectued?

hi all
i have two textfields textfield1,textfield2
and i overrided focuslost for textfield1 to execute a for loop
when i press the button printable_window it shows a frame to be printed
when i press the Print This Window button the PrinterJob is executed,press cancel
and back to the textfield1 and press tab,so the focuslost must be invoked right? but it's not and the for loop won't be executed???
any ideas why this happens?
here's my code:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.awt.print.*;
class PrintUIWindow implements Printable, ActionListener {
    JFrame frameToPrint;
    static JFrame f;
    static JButton printable_window;
    public int print(Graphics g, PageFormat pf, int page) throws
                                                        PrinterException {
        if (page > 0) {
            return NO_SUCH_PAGE;
        Graphics2D g2d = (Graphics2D)g;
        g2d.translate(pf.getImageableX(), pf.getImageableY());
        frameToPrint.printAll(g);
        return PAGE_EXISTS;
    public void actionPerformed(ActionEvent e) {
         f.dispose();
         printable_window.setEnabled(true);
         PrinterJob job = PrinterJob.getPrinterJob();
         job.setPrintable(this);
         boolean ok = job.printDialog();
         if (ok) {
             try {
                  job.print();
             } catch (PrinterException ex) {
              /* The job did not successfully complete */
    public PrintUIWindow(JFrame f) {
        frameToPrint = f;
    public static void main(String args[]) {
        UIManager.put("swing.boldMetal", Boolean.FALSE);
        f = new JFrame("Print UI Example");
        f.setDefaultCloseOperation(JFrame.DISPOSE_ON_CLOSE);
        JFrame f2=new JFrame("Test Frame");
        printable_window=new JButton("printable_window");
        final JTextField textfield1=new JTextField("ID");
        final JTextField textfield2=new JTextField("Password");
        f2.getRootPane().setDefaultButton(printable_window);
        f2.setSize(250,100);
        f2.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        f2.setLayout(new FlowLayout());
        f2.add(textfield1);f2.add(textfield2);f2.add(printable_window);
        f2.setLocationRelativeTo(null);
        f2.setVisible(true);
        f.addWindowListener(new WindowAdapter() {
           public void windowClosing(WindowEvent e) {printable_window.setEnabled(true);}
        JTextArea text = new JTextArea(50, 20);
        for (int i=1;i<=50;i++) {
            text.append("Line " + i + "\n");
        JScrollPane pane = new JScrollPane(text);
        pane.setPreferredSize(new Dimension(250,200));
        f.add("Center", pane);
        JButton printButton = new JButton("Print This Window");
        printButton.addActionListener(new PrintUIWindow(f));
        f.add("South", printButton);
        f.pack();
        f.setLocationRelativeTo(null);
        printable_window.addActionListener(new ActionListener(){
        public void actionPerformed(ActionEvent e){
        textfield2.setText("");
        printable_window.setEnabled(false);
        f.setVisible(true);
        textfield1.addFocusListener(new FocusAdapter(){
        public void focusLost(FocusEvent e){
        for(int i=1;i<6;i++)
            System.out.println("Loop"+i);
}

iam_new2 wrote:
any help here?Swing questions should be asked in the [Swing forum|http://forums.sun.com/forum.jspa?forumID=57]
Kaj

Re: Internet Browser doesn't access the Internet after Enterprise Activation

do you know how to tell if i am using my blackberry unlimited internet? or am using my mobiles net?

Hi dinodog4
Go into Options>Advanced Options>Browser and make sure your Default Browser Configuration is set to Internet Browser. This will ensure you are using your BlackBerry data service.
Thanks
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

STS possibility one of the hierarchyu00B4s user doesnu00B4t receive the email

Hi all,
What can I do if I want that one user that is in the hierarchy doesn´t receive the email that the administrator sends???
My problem is that the administrator wants to send an email once a year to all users except one of them, but other times he sends the email to all users.
I don´t know how to solve this problem.
Thanks

You can also delete the email from the user account in Su01. This will ha mper broadacsting, if you have broadacasting. Otherwise this will work fine.
Ravi Thothadri

My imac cant regconise the finder after upgrading the itunes7!!!!!!

after restart, the computer seems to run slower, only the top right icon shows up but the others run slowly. also there's no icons (all the folders & files) on my desktop!!!!!!! when i click the tool bar's finder icon, it doesn't work!!!! only safari survives!!!!
what's wrong with my imac????? is it the itunes issue or the hardware problem (something crashing?)
please help!!!

"Is it run under disk ultility?"
Yes.
"so what should i do after doing that?"
Restart. See below.
Save and/or quit your applications & doucuments
Go to Applications>Utilities Folder
Click Disk Utility
Click the Volumn (HD) that you want to check.
Click the Repair Disk Permissions button. (Don't worry about verifying)
When the repairs have finished, you will see the “most important thing”:
Permission Repairs Complete
The previliges have been repaired or completed on the selected volumn.
Restart your computer.
See Knowlege Base Article http://docs.info.apple.com/article.html?artnum=106214 Using Disk Utility and fsck to resolve startup issues or perform disk maintenance
It is recommened that you should Repair Permissions:
After installing and/or updating an OS
After installing software
===================
Regarding the "Norton AntiVirus Error", apparently you need to update your Anti Virus program and/or should have disabled it when updating iTunes if the downloading instructions stated so.
If you still receive the error after repairing permissions, you will need to run LiveUpdate to update Nortons per their procedures.

User Approver doesn't receive the BID after WF Approval.

Similar Messages

Maybe you are looking for